Services
ADAS Calibration After Audi A5 Windshield Replacement: Why It's a Critical Safety Step
What ADAS Is and Why Windshield Replacement Can Affect It
If your Audi A5 uses camera-based safety features, windshield replacement can impact how those features “see” the road. Calibration is the manufacturer-defined process used to confirm alignment and restore function. It is typically treated as part of the safe completion of a windshield replacement—not an optional add-on—because it verifies the system meets specifications after the glass has been replaced.
When Calibration Is Required: OEM Guidance and Make/Model Specificity
The key point: calibration is vehicle- and system-specific. Two Audi A5 trims can have different ADAS equipment and different procedures. Confirm requirements before service, and request documentation afterward. A qualified provider will verify what is required and complete it as part of returning the vehicle to proper operating condition.
Confirm equipped safety features tied to the windshield/camera on your Audi A5
Verify OEM requirements for calibration after glass replacement on this system
Obtain documentation showing calibration/scans were performed and passed
Static vs Dynamic Calibration: What's the Difference and Which You May Need
Static calibration is performed indoors with targets and measured setup; dynamic calibration is performed by driving under specific parameters. Some Audi A5 systems require a combined workflow. The most important factor is following the manufacturer’s procedure for your exact vehicle configuration and documenting completion.
The Calibration Workflow: Pre-Scan, Setup, Targets/Road Test, and Post-Scan
Calibration should be planned, executed, and verified—not improvised. The best practice sequence is: verify correct glass and mounts, run a pre-scan, perform the required static/dynamic calibration, and validate with a post-scan and documentation. That reduces risk and provides a clear record for your Audi A5.
Step 1: verify mounts/glass and run a pre-scan
Step 2: complete static/dynamic calibration per OEM procedure
Step 3: post-scan/verify and deliver documentation
Risks of Skipping Calibration: Safety, Performance, and Liability Considerations
Skipping required calibration can create safety risk and uncertainty. The system may be out of spec even if there’s no obvious warning light, and performance can degrade in critical moments. For your Audi A5, insist on confirmation and documentation so you know the system was returned to specification.
How to Choose a Qualified Provider for Audi A5 ADAS Calibration
Pick a shop that treats calibration as a documented safety process. For Audi A5 service, ask whether they perform pre/post scans, whether they complete static/dynamic calibration as required, and what proof you receive at the end. A qualified provider will be transparent about procedures, equipment, and validation steps.
Services
ADAS Calibration After Audi A5 Windshield Replacement: Why It's a Critical Safety Step
What ADAS Is and Why Windshield Replacement Can Affect It
If your Audi A5 uses camera-based safety features, windshield replacement can impact how those features “see” the road. Calibration is the manufacturer-defined process used to confirm alignment and restore function. It is typically treated as part of the safe completion of a windshield replacement—not an optional add-on—because it verifies the system meets specifications after the glass has been replaced.
When Calibration Is Required: OEM Guidance and Make/Model Specificity
The key point: calibration is vehicle- and system-specific. Two Audi A5 trims can have different ADAS equipment and different procedures. Confirm requirements before service, and request documentation afterward. A qualified provider will verify what is required and complete it as part of returning the vehicle to proper operating condition.
Confirm equipped safety features tied to the windshield/camera on your Audi A5
Verify OEM requirements for calibration after glass replacement on this system
Obtain documentation showing calibration/scans were performed and passed
Static vs Dynamic Calibration: What's the Difference and Which You May Need
Static calibration is performed indoors with targets and measured setup; dynamic calibration is performed by driving under specific parameters. Some Audi A5 systems require a combined workflow. The most important factor is following the manufacturer’s procedure for your exact vehicle configuration and documenting completion.
The Calibration Workflow: Pre-Scan, Setup, Targets/Road Test, and Post-Scan
Calibration should be planned, executed, and verified—not improvised. The best practice sequence is: verify correct glass and mounts, run a pre-scan, perform the required static/dynamic calibration, and validate with a post-scan and documentation. That reduces risk and provides a clear record for your Audi A5.
Step 1: verify mounts/glass and run a pre-scan
Step 2: complete static/dynamic calibration per OEM procedure
Step 3: post-scan/verify and deliver documentation
Risks of Skipping Calibration: Safety, Performance, and Liability Considerations
Skipping required calibration can create safety risk and uncertainty. The system may be out of spec even if there’s no obvious warning light, and performance can degrade in critical moments. For your Audi A5, insist on confirmation and documentation so you know the system was returned to specification.
How to Choose a Qualified Provider for Audi A5 ADAS Calibration
Pick a shop that treats calibration as a documented safety process. For Audi A5 service, ask whether they perform pre/post scans, whether they complete static/dynamic calibration as required, and what proof you receive at the end. A qualified provider will be transparent about procedures, equipment, and validation steps.
Services
ADAS Calibration After Audi A5 Windshield Replacement: Why It's a Critical Safety Step
What ADAS Is and Why Windshield Replacement Can Affect It
If your Audi A5 uses camera-based safety features, windshield replacement can impact how those features “see” the road. Calibration is the manufacturer-defined process used to confirm alignment and restore function. It is typically treated as part of the safe completion of a windshield replacement—not an optional add-on—because it verifies the system meets specifications after the glass has been replaced.
When Calibration Is Required: OEM Guidance and Make/Model Specificity
The key point: calibration is vehicle- and system-specific. Two Audi A5 trims can have different ADAS equipment and different procedures. Confirm requirements before service, and request documentation afterward. A qualified provider will verify what is required and complete it as part of returning the vehicle to proper operating condition.
Confirm equipped safety features tied to the windshield/camera on your Audi A5
Verify OEM requirements for calibration after glass replacement on this system
Obtain documentation showing calibration/scans were performed and passed
Static vs Dynamic Calibration: What's the Difference and Which You May Need
Static calibration is performed indoors with targets and measured setup; dynamic calibration is performed by driving under specific parameters. Some Audi A5 systems require a combined workflow. The most important factor is following the manufacturer’s procedure for your exact vehicle configuration and documenting completion.
The Calibration Workflow: Pre-Scan, Setup, Targets/Road Test, and Post-Scan
Calibration should be planned, executed, and verified—not improvised. The best practice sequence is: verify correct glass and mounts, run a pre-scan, perform the required static/dynamic calibration, and validate with a post-scan and documentation. That reduces risk and provides a clear record for your Audi A5.
Step 1: verify mounts/glass and run a pre-scan
Step 2: complete static/dynamic calibration per OEM procedure
Step 3: post-scan/verify and deliver documentation
Risks of Skipping Calibration: Safety, Performance, and Liability Considerations
Skipping required calibration can create safety risk and uncertainty. The system may be out of spec even if there’s no obvious warning light, and performance can degrade in critical moments. For your Audi A5, insist on confirmation and documentation so you know the system was returned to specification.
How to Choose a Qualified Provider for Audi A5 ADAS Calibration
Pick a shop that treats calibration as a documented safety process. For Audi A5 service, ask whether they perform pre/post scans, whether they complete static/dynamic calibration as required, and what proof you receive at the end. A qualified provider will be transparent about procedures, equipment, and validation steps.
Enjoy More Auto Glass Services Blogs
Browse service-focused blogs covering windshield replacement and repair, door and quarter glass, back glass, sunroof glass, and ADAS calibration—so you know what each service includes and when it’s needed. We also simplify scheduling, insurance handling, and what to expect from mobile installation and calibration steps.
Bang AutoGlass
Quick Links
Services
Service Areas
Makes & Models
Bang AutoGlass
Quick Links
Services
Service Areas
Makes & Models
Bang AutoGlass
Quick Links
Services