Services
ADAS Calibration Checklist for Chevrolet Malibu: Documentation, Verification, and Final Safety Checks
Identify Chevrolet Malibu ADAS Systems and OEM Calibration Triggers
Effective ADAS Calibration on a Chevrolet Malibu begins with an accurate inventory of the ADAS systems present and the conditions that require calibration. Verify configuration through VIN/build data, then confirm by scanning for all driver-assist modules so the feature list matches the vehicle in the bay. Link each module to its functions: the forward camera supports lane departure/centering, radar supports adaptive cruise and forward collision/AEB, and blind spot or parking features may rely on corner radars, ultrasonics, or auxiliary cameras. Perform a physical walk-around to confirm sensor locations and mounting integrity, including the windshield camera bracket, front radar bracket/cover, and any rear corner radar locations. Determine whether the OEM requires static target calibration, dynamic road learning, or a combined sequence for the Chevrolet Malibu, and note the order in which prerequisites and routines must be completed. Capture the trigger for ADAS Calibration explicitly—windshield replacement, bracket disturbance, radar removal, bumper/grille service, alignment changes, steering angle service, ride-height changes, tire size changes, battery disconnects, or impact. When the trigger is unclear, default to OEM instructions and module diagnostics, because some systems only flag requirements after a drive cycle. Validate sensor interfaces that affect results: correct windshield specification for the camera zone, secure bracket bonding, and a radar cover/emblem that is clean, undamaged, and not repainted. The output should be a concise calibration plan listing systems to calibrate, prerequisites, and the proof you will collect to document completion.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Before running any routine, build a documentation baseline so ADAS Calibration on the Chevrolet Malibu is traceable from start to finish. Record VIN, mileage, RO number, and the repair context that prompted calibration (windshield work, collision repairs, alignment, suspension changes, module replacement, or an active warning). Support battery voltage with a maintainer, verify network stability, and perform a full health scan. Save the complete scan output that shows module inventory, DTC status by module (current/pending/history), and any freeze-frame data. Summarize findings in a short DTC baseline note that separates pre-existing issues—low voltage events, blocked sensor messages, intermittent communication faults—from anything that appears after the service event. Document what was physically disturbed: camera removal, bracket replacement, radar unplugging or remounting, bumper/grille removal, steering angle resets, and any alignment adjustments. Capture intake measurements that can invalidate calibration prerequisites, including tire size consistency, set pressures, and ride-height stance, plus aftermarket accessories that may interfere with sensors. Add photos when helpful: windshield camera area, radar cover/emblem, and instrument-cluster warnings at check-in. Identify and save the correct OEM procedure for the exact Chevrolet Malibu configuration, noting whether it is static, dynamic, or combined and any requirements for load, fuel level, temperature, or lane-marking quality. Close with a step plan that states what will be calibrated, what must be corrected first, and what post-calibration evidence will be attached. Time-stamp and retain the original exports unedited.
Record VIN, mileage, RO details, and the event that triggered calibration
Save a full pre-scan report with DTC status and freeze-frame data
Photograph camera and radar areas plus any warning indicators
Vehicle Readiness Checklist for Chevrolet Malibu: Tires, Alignment, Ride Height, and Sensor/Glass Prep
Successful ADAS Calibration requires the Chevrolet Malibu to meet OEM readiness prerequisites, because calibration routines assume the vehicle is mechanically and optically “square” before targets or road learning begin. Confirm tires and wheels are correct and consistent: same specified size on all four corners, pressures at placard spec, and no temporary spare, mismatched diameters, or abnormal wear that can change steering inputs. Verify alignment is within specification and the steering wheel is centered, then complete any required steering angle or yaw-rate initialization in the OEM sequence. Evaluate ride height and load state; remove heavy cargo, note lifts or lowering components, and comply with any fuel-level or ballast requirements specified by the procedure. Prepare the camera area with care: ensure the camera is fully seated, the bracket is properly bonded and not twisted, and the viewing zone is clean, haze-free, and unobstructed by stickers, mounts, tint edges, or film residue. For radar, confirm the bracket is straight, fasteners are secure, and the cover/emblem is the correct part and is clean, not cracked, and not repainted. Confirm other linked sensors (corner radars, ultrasonics, side cameras) are connected and unobstructed, because some routines will not run if any related input is flagged as blocked. Stabilize battery voltage with a power supply, set the vehicle to the OEM “normal” mode, and document final tire pressures and alignment status immediately before launching ADAS Calibration on the Chevrolet Malibu.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
A repeatable bay setup reduces rework and protects accuracy during ADAS Calibration on a Chevrolet Malibu. Confirm the calibration surface is level and the vehicle is positioned on a marked centerline with wheels straight-ahead. Create a clean visual environment by removing reflective objects, high-contrast backgrounds, and moving shadows, and by controlling lighting to prevent glare on the windshield and hotspots on the target. Measure target distance, height, and lateral offset from OEM-defined datum points, and avoid “eyeballing” placement from trim gaps or body lines. Validate equipment before you start: targets must match the correct routine and revision for the Chevrolet Malibu, target faces must be clean and undamaged, and frames, stands, lasers, and measuring bars must be square, calibrated, and locked. Update scan tool software and confirm the ADAS database supports the exact year/variant, then record tool identifiers and software versions in the file. Set power stability with a maintainer and reduce electrical loads that can cause voltage drops mid-routine. Run tool self-checks and confirm stable communications so the routine is not interrupted. If using an alignment rack or lift, confirm the platform is level and ensure clamps, posts, or fixtures do not block camera or radar sightlines. For dynamic procedures, pre-plan a road segment with clear lane markings and the required speed range, and begin on-road learning only after the static setup checks are satisfied.
Verify bay level, target distance, lighting, and clear sightlines
Confirm targets and scan-tool software match the vehicle configuration
Use stable power and save completion documentation and post-scan
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Chevrolet Malibu
Verification is where ADAS Calibration becomes defensible: the goal is not only to complete a routine, but to demonstrate that the Chevrolet Malibu ADAS stack operates as intended after service. Immediately run a full post-scan and save it in the same format as the pre-scan so changes are auditable. Confirm calibration-related DTCs are cleared, no new communication or voltage faults were introduced, and any remaining codes are either resolved or documented as pre-existing. Check the instrument cluster and ADAS menus to confirm lane, collision, adaptive cruise, camera, and radar features show as available and warnings are absent after a key cycle. Run any OEM confirmation tests available in the scan tool, such as camera aiming status, steering angle validation, or radar alignment prompts. If the Chevrolet Malibu requires dynamic calibration or post-calibration learning, complete a controlled road validation in the specified speed range on roads with clear lane markings. Maintain steady lane position and avoid abrupt inputs that can interrupt learning. Evaluate behavior, not just icons: lane centering should track smoothly, adaptive cruise should follow predictably, and collision warnings should not trigger unexpectedly. After the drive, recheck for new DTCs if required and confirm features remain enabled through another key cycle. When warnings persist, avoid blind repeats; recheck prerequisites (tires, alignment, ride height), inspect sensor mounts and cleanliness, reconfirm target placement measurements, and verify software coverage for the exact configuration. Attach the post-scan and completion evidence to the ADAS Calibration record.
Final Records and Proof: Calibration Report, Attachments, and Retention for Chevrolet Malibu
Finish ADAS Calibration by producing a calibration record that is easy to audit and hard to dispute for the Chevrolet Malibu. Create a single packet that includes the pre-scan file, the post-scan file, and the scan tool’s calibration completion report, plus a brief statement describing the calibration trigger and the systems addressed. Add prerequisite details as structured notes: tire sizes and final pressures, alignment status and printout if performed, ride-height or suspension observations, and any load or fuel-level conditions required by the OEM procedure. Include photos that connect the setup to the procedure, such as target placement with measurement references, bay layout and lighting, windshield camera bracket condition, and radar cover/emblem condition. Record equipment traceability (scan tool model, tablet/VCI serial number, software/database version, and target kit or frame identifier), since tool configuration can affect results. Document exceptions and how they were resolved—for example, using a maintainer to correct low voltage, cleaning a blocked sensor surface, replacing a damaged bracket, or completing alignment before calibration could proceed. Summarize verification in customer-friendly terms: which systems were calibrated on the Chevrolet Malibu, whether road validation was performed when required, and confirmation that post-scan results show no related warnings or faults. Store original exports (PDF/CSV/native reports) with consistent naming, time-stamps, and technician identification, and retain them per shop policy or insurer requirements. This retention supports future diagnostics and supplements without relying on memory.
Services
ADAS Calibration Checklist for Chevrolet Malibu: Documentation, Verification, and Final Safety Checks
Identify Chevrolet Malibu ADAS Systems and OEM Calibration Triggers
Effective ADAS Calibration on a Chevrolet Malibu begins with an accurate inventory of the ADAS systems present and the conditions that require calibration. Verify configuration through VIN/build data, then confirm by scanning for all driver-assist modules so the feature list matches the vehicle in the bay. Link each module to its functions: the forward camera supports lane departure/centering, radar supports adaptive cruise and forward collision/AEB, and blind spot or parking features may rely on corner radars, ultrasonics, or auxiliary cameras. Perform a physical walk-around to confirm sensor locations and mounting integrity, including the windshield camera bracket, front radar bracket/cover, and any rear corner radar locations. Determine whether the OEM requires static target calibration, dynamic road learning, or a combined sequence for the Chevrolet Malibu, and note the order in which prerequisites and routines must be completed. Capture the trigger for ADAS Calibration explicitly—windshield replacement, bracket disturbance, radar removal, bumper/grille service, alignment changes, steering angle service, ride-height changes, tire size changes, battery disconnects, or impact. When the trigger is unclear, default to OEM instructions and module diagnostics, because some systems only flag requirements after a drive cycle. Validate sensor interfaces that affect results: correct windshield specification for the camera zone, secure bracket bonding, and a radar cover/emblem that is clean, undamaged, and not repainted. The output should be a concise calibration plan listing systems to calibrate, prerequisites, and the proof you will collect to document completion.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Before running any routine, build a documentation baseline so ADAS Calibration on the Chevrolet Malibu is traceable from start to finish. Record VIN, mileage, RO number, and the repair context that prompted calibration (windshield work, collision repairs, alignment, suspension changes, module replacement, or an active warning). Support battery voltage with a maintainer, verify network stability, and perform a full health scan. Save the complete scan output that shows module inventory, DTC status by module (current/pending/history), and any freeze-frame data. Summarize findings in a short DTC baseline note that separates pre-existing issues—low voltage events, blocked sensor messages, intermittent communication faults—from anything that appears after the service event. Document what was physically disturbed: camera removal, bracket replacement, radar unplugging or remounting, bumper/grille removal, steering angle resets, and any alignment adjustments. Capture intake measurements that can invalidate calibration prerequisites, including tire size consistency, set pressures, and ride-height stance, plus aftermarket accessories that may interfere with sensors. Add photos when helpful: windshield camera area, radar cover/emblem, and instrument-cluster warnings at check-in. Identify and save the correct OEM procedure for the exact Chevrolet Malibu configuration, noting whether it is static, dynamic, or combined and any requirements for load, fuel level, temperature, or lane-marking quality. Close with a step plan that states what will be calibrated, what must be corrected first, and what post-calibration evidence will be attached. Time-stamp and retain the original exports unedited.
Record VIN, mileage, RO details, and the event that triggered calibration
Save a full pre-scan report with DTC status and freeze-frame data
Photograph camera and radar areas plus any warning indicators
Vehicle Readiness Checklist for Chevrolet Malibu: Tires, Alignment, Ride Height, and Sensor/Glass Prep
Successful ADAS Calibration requires the Chevrolet Malibu to meet OEM readiness prerequisites, because calibration routines assume the vehicle is mechanically and optically “square” before targets or road learning begin. Confirm tires and wheels are correct and consistent: same specified size on all four corners, pressures at placard spec, and no temporary spare, mismatched diameters, or abnormal wear that can change steering inputs. Verify alignment is within specification and the steering wheel is centered, then complete any required steering angle or yaw-rate initialization in the OEM sequence. Evaluate ride height and load state; remove heavy cargo, note lifts or lowering components, and comply with any fuel-level or ballast requirements specified by the procedure. Prepare the camera area with care: ensure the camera is fully seated, the bracket is properly bonded and not twisted, and the viewing zone is clean, haze-free, and unobstructed by stickers, mounts, tint edges, or film residue. For radar, confirm the bracket is straight, fasteners are secure, and the cover/emblem is the correct part and is clean, not cracked, and not repainted. Confirm other linked sensors (corner radars, ultrasonics, side cameras) are connected and unobstructed, because some routines will not run if any related input is flagged as blocked. Stabilize battery voltage with a power supply, set the vehicle to the OEM “normal” mode, and document final tire pressures and alignment status immediately before launching ADAS Calibration on the Chevrolet Malibu.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
A repeatable bay setup reduces rework and protects accuracy during ADAS Calibration on a Chevrolet Malibu. Confirm the calibration surface is level and the vehicle is positioned on a marked centerline with wheels straight-ahead. Create a clean visual environment by removing reflective objects, high-contrast backgrounds, and moving shadows, and by controlling lighting to prevent glare on the windshield and hotspots on the target. Measure target distance, height, and lateral offset from OEM-defined datum points, and avoid “eyeballing” placement from trim gaps or body lines. Validate equipment before you start: targets must match the correct routine and revision for the Chevrolet Malibu, target faces must be clean and undamaged, and frames, stands, lasers, and measuring bars must be square, calibrated, and locked. Update scan tool software and confirm the ADAS database supports the exact year/variant, then record tool identifiers and software versions in the file. Set power stability with a maintainer and reduce electrical loads that can cause voltage drops mid-routine. Run tool self-checks and confirm stable communications so the routine is not interrupted. If using an alignment rack or lift, confirm the platform is level and ensure clamps, posts, or fixtures do not block camera or radar sightlines. For dynamic procedures, pre-plan a road segment with clear lane markings and the required speed range, and begin on-road learning only after the static setup checks are satisfied.
Verify bay level, target distance, lighting, and clear sightlines
Confirm targets and scan-tool software match the vehicle configuration
Use stable power and save completion documentation and post-scan
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Chevrolet Malibu
Verification is where ADAS Calibration becomes defensible: the goal is not only to complete a routine, but to demonstrate that the Chevrolet Malibu ADAS stack operates as intended after service. Immediately run a full post-scan and save it in the same format as the pre-scan so changes are auditable. Confirm calibration-related DTCs are cleared, no new communication or voltage faults were introduced, and any remaining codes are either resolved or documented as pre-existing. Check the instrument cluster and ADAS menus to confirm lane, collision, adaptive cruise, camera, and radar features show as available and warnings are absent after a key cycle. Run any OEM confirmation tests available in the scan tool, such as camera aiming status, steering angle validation, or radar alignment prompts. If the Chevrolet Malibu requires dynamic calibration or post-calibration learning, complete a controlled road validation in the specified speed range on roads with clear lane markings. Maintain steady lane position and avoid abrupt inputs that can interrupt learning. Evaluate behavior, not just icons: lane centering should track smoothly, adaptive cruise should follow predictably, and collision warnings should not trigger unexpectedly. After the drive, recheck for new DTCs if required and confirm features remain enabled through another key cycle. When warnings persist, avoid blind repeats; recheck prerequisites (tires, alignment, ride height), inspect sensor mounts and cleanliness, reconfirm target placement measurements, and verify software coverage for the exact configuration. Attach the post-scan and completion evidence to the ADAS Calibration record.
Final Records and Proof: Calibration Report, Attachments, and Retention for Chevrolet Malibu
Finish ADAS Calibration by producing a calibration record that is easy to audit and hard to dispute for the Chevrolet Malibu. Create a single packet that includes the pre-scan file, the post-scan file, and the scan tool’s calibration completion report, plus a brief statement describing the calibration trigger and the systems addressed. Add prerequisite details as structured notes: tire sizes and final pressures, alignment status and printout if performed, ride-height or suspension observations, and any load or fuel-level conditions required by the OEM procedure. Include photos that connect the setup to the procedure, such as target placement with measurement references, bay layout and lighting, windshield camera bracket condition, and radar cover/emblem condition. Record equipment traceability (scan tool model, tablet/VCI serial number, software/database version, and target kit or frame identifier), since tool configuration can affect results. Document exceptions and how they were resolved—for example, using a maintainer to correct low voltage, cleaning a blocked sensor surface, replacing a damaged bracket, or completing alignment before calibration could proceed. Summarize verification in customer-friendly terms: which systems were calibrated on the Chevrolet Malibu, whether road validation was performed when required, and confirmation that post-scan results show no related warnings or faults. Store original exports (PDF/CSV/native reports) with consistent naming, time-stamps, and technician identification, and retain them per shop policy or insurer requirements. This retention supports future diagnostics and supplements without relying on memory.
Services
ADAS Calibration Checklist for Chevrolet Malibu: Documentation, Verification, and Final Safety Checks
Identify Chevrolet Malibu ADAS Systems and OEM Calibration Triggers
Effective ADAS Calibration on a Chevrolet Malibu begins with an accurate inventory of the ADAS systems present and the conditions that require calibration. Verify configuration through VIN/build data, then confirm by scanning for all driver-assist modules so the feature list matches the vehicle in the bay. Link each module to its functions: the forward camera supports lane departure/centering, radar supports adaptive cruise and forward collision/AEB, and blind spot or parking features may rely on corner radars, ultrasonics, or auxiliary cameras. Perform a physical walk-around to confirm sensor locations and mounting integrity, including the windshield camera bracket, front radar bracket/cover, and any rear corner radar locations. Determine whether the OEM requires static target calibration, dynamic road learning, or a combined sequence for the Chevrolet Malibu, and note the order in which prerequisites and routines must be completed. Capture the trigger for ADAS Calibration explicitly—windshield replacement, bracket disturbance, radar removal, bumper/grille service, alignment changes, steering angle service, ride-height changes, tire size changes, battery disconnects, or impact. When the trigger is unclear, default to OEM instructions and module diagnostics, because some systems only flag requirements after a drive cycle. Validate sensor interfaces that affect results: correct windshield specification for the camera zone, secure bracket bonding, and a radar cover/emblem that is clean, undamaged, and not repainted. The output should be a concise calibration plan listing systems to calibrate, prerequisites, and the proof you will collect to document completion.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Before running any routine, build a documentation baseline so ADAS Calibration on the Chevrolet Malibu is traceable from start to finish. Record VIN, mileage, RO number, and the repair context that prompted calibration (windshield work, collision repairs, alignment, suspension changes, module replacement, or an active warning). Support battery voltage with a maintainer, verify network stability, and perform a full health scan. Save the complete scan output that shows module inventory, DTC status by module (current/pending/history), and any freeze-frame data. Summarize findings in a short DTC baseline note that separates pre-existing issues—low voltage events, blocked sensor messages, intermittent communication faults—from anything that appears after the service event. Document what was physically disturbed: camera removal, bracket replacement, radar unplugging or remounting, bumper/grille removal, steering angle resets, and any alignment adjustments. Capture intake measurements that can invalidate calibration prerequisites, including tire size consistency, set pressures, and ride-height stance, plus aftermarket accessories that may interfere with sensors. Add photos when helpful: windshield camera area, radar cover/emblem, and instrument-cluster warnings at check-in. Identify and save the correct OEM procedure for the exact Chevrolet Malibu configuration, noting whether it is static, dynamic, or combined and any requirements for load, fuel level, temperature, or lane-marking quality. Close with a step plan that states what will be calibrated, what must be corrected first, and what post-calibration evidence will be attached. Time-stamp and retain the original exports unedited.
Record VIN, mileage, RO details, and the event that triggered calibration
Save a full pre-scan report with DTC status and freeze-frame data
Photograph camera and radar areas plus any warning indicators
Vehicle Readiness Checklist for Chevrolet Malibu: Tires, Alignment, Ride Height, and Sensor/Glass Prep
Successful ADAS Calibration requires the Chevrolet Malibu to meet OEM readiness prerequisites, because calibration routines assume the vehicle is mechanically and optically “square” before targets or road learning begin. Confirm tires and wheels are correct and consistent: same specified size on all four corners, pressures at placard spec, and no temporary spare, mismatched diameters, or abnormal wear that can change steering inputs. Verify alignment is within specification and the steering wheel is centered, then complete any required steering angle or yaw-rate initialization in the OEM sequence. Evaluate ride height and load state; remove heavy cargo, note lifts or lowering components, and comply with any fuel-level or ballast requirements specified by the procedure. Prepare the camera area with care: ensure the camera is fully seated, the bracket is properly bonded and not twisted, and the viewing zone is clean, haze-free, and unobstructed by stickers, mounts, tint edges, or film residue. For radar, confirm the bracket is straight, fasteners are secure, and the cover/emblem is the correct part and is clean, not cracked, and not repainted. Confirm other linked sensors (corner radars, ultrasonics, side cameras) are connected and unobstructed, because some routines will not run if any related input is flagged as blocked. Stabilize battery voltage with a power supply, set the vehicle to the OEM “normal” mode, and document final tire pressures and alignment status immediately before launching ADAS Calibration on the Chevrolet Malibu.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
A repeatable bay setup reduces rework and protects accuracy during ADAS Calibration on a Chevrolet Malibu. Confirm the calibration surface is level and the vehicle is positioned on a marked centerline with wheels straight-ahead. Create a clean visual environment by removing reflective objects, high-contrast backgrounds, and moving shadows, and by controlling lighting to prevent glare on the windshield and hotspots on the target. Measure target distance, height, and lateral offset from OEM-defined datum points, and avoid “eyeballing” placement from trim gaps or body lines. Validate equipment before you start: targets must match the correct routine and revision for the Chevrolet Malibu, target faces must be clean and undamaged, and frames, stands, lasers, and measuring bars must be square, calibrated, and locked. Update scan tool software and confirm the ADAS database supports the exact year/variant, then record tool identifiers and software versions in the file. Set power stability with a maintainer and reduce electrical loads that can cause voltage drops mid-routine. Run tool self-checks and confirm stable communications so the routine is not interrupted. If using an alignment rack or lift, confirm the platform is level and ensure clamps, posts, or fixtures do not block camera or radar sightlines. For dynamic procedures, pre-plan a road segment with clear lane markings and the required speed range, and begin on-road learning only after the static setup checks are satisfied.
Verify bay level, target distance, lighting, and clear sightlines
Confirm targets and scan-tool software match the vehicle configuration
Use stable power and save completion documentation and post-scan
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Chevrolet Malibu
Verification is where ADAS Calibration becomes defensible: the goal is not only to complete a routine, but to demonstrate that the Chevrolet Malibu ADAS stack operates as intended after service. Immediately run a full post-scan and save it in the same format as the pre-scan so changes are auditable. Confirm calibration-related DTCs are cleared, no new communication or voltage faults were introduced, and any remaining codes are either resolved or documented as pre-existing. Check the instrument cluster and ADAS menus to confirm lane, collision, adaptive cruise, camera, and radar features show as available and warnings are absent after a key cycle. Run any OEM confirmation tests available in the scan tool, such as camera aiming status, steering angle validation, or radar alignment prompts. If the Chevrolet Malibu requires dynamic calibration or post-calibration learning, complete a controlled road validation in the specified speed range on roads with clear lane markings. Maintain steady lane position and avoid abrupt inputs that can interrupt learning. Evaluate behavior, not just icons: lane centering should track smoothly, adaptive cruise should follow predictably, and collision warnings should not trigger unexpectedly. After the drive, recheck for new DTCs if required and confirm features remain enabled through another key cycle. When warnings persist, avoid blind repeats; recheck prerequisites (tires, alignment, ride height), inspect sensor mounts and cleanliness, reconfirm target placement measurements, and verify software coverage for the exact configuration. Attach the post-scan and completion evidence to the ADAS Calibration record.
Final Records and Proof: Calibration Report, Attachments, and Retention for Chevrolet Malibu
Finish ADAS Calibration by producing a calibration record that is easy to audit and hard to dispute for the Chevrolet Malibu. Create a single packet that includes the pre-scan file, the post-scan file, and the scan tool’s calibration completion report, plus a brief statement describing the calibration trigger and the systems addressed. Add prerequisite details as structured notes: tire sizes and final pressures, alignment status and printout if performed, ride-height or suspension observations, and any load or fuel-level conditions required by the OEM procedure. Include photos that connect the setup to the procedure, such as target placement with measurement references, bay layout and lighting, windshield camera bracket condition, and radar cover/emblem condition. Record equipment traceability (scan tool model, tablet/VCI serial number, software/database version, and target kit or frame identifier), since tool configuration can affect results. Document exceptions and how they were resolved—for example, using a maintainer to correct low voltage, cleaning a blocked sensor surface, replacing a damaged bracket, or completing alignment before calibration could proceed. Summarize verification in customer-friendly terms: which systems were calibrated on the Chevrolet Malibu, whether road validation was performed when required, and confirmation that post-scan results show no related warnings or faults. Store original exports (PDF/CSV/native reports) with consistent naming, time-stamps, and technician identification, and retain them per shop policy or insurer requirements. This retention supports future diagnostics and supplements without relying on memory.
Enjoy More Auto Glass Services Blogs
Browse service-focused blogs covering windshield replacement and repair, door and quarter glass, back glass, sunroof glass, and ADAS calibration—so you know what each service includes and when it’s needed. We also simplify scheduling, insurance handling, and what to expect from mobile installation and calibration steps.
Bang AutoGlass
Quick Links
Services
Service Areas
Makes & Models
Bang AutoGlass
Quick Links
Services
Service Areas
Makes & Models
Bang AutoGlass
Quick Links
Services