Services
Service Areas
Alfa Romeo GT Windshield Technology Guide: HUD, Rain Sensors, Heated/Acoustic Glass, and What It Means for Replacement
Alfa Romeo GT Windshield Technology Guide: HUD, Rain Sensors, Heated/Acoustic Glass, and What It Means for Replacement
For many Alfa Romeo GT owners, a cracked windshield seems simple until built-in features stop working. Today’s Alfa Romeo GT windshields may be designed for HUD projections, rain-sensing wipers and light sensors, heated de-ice zones, and acoustic lamination for a quieter cabin. In certain packages, the upper windshield and mirror area also support forward-facing ADAS cameras, so replacement is as much about restoring system performance as replacing glass. A proper Alfa Romeo GT windshield replacement starts with the correct specification: the right glass variant (HUD, rain sensor, heated, acoustic) plus the correct brackets and mounting points that the vehicle expects. Using the wrong glass can reduce HUD clarity, cause sensor/camera faults, or create wind noise and leaks. Installation must also be controlled—clean prep, accurate placement, and a consistent urethane bond—so the windshield sits to factory tolerances and seals properly. Bang AutoGlass delivers fast, feature-correct results with mobile auto glass service at your home or workplace—often as soon as next day. Most installs take about 30–45 minutes, and we recommend waiting at least 1 hour for adhesive cure time before safe drive-away. Every job includes a lifetime workmanship warranty, and we accept all insurance companies when your policy includes comprehensive coverage.
How to Tell What Windshield Tech Your Alfa Romeo GT Has (HUD, Rain Sensor, Heated, Acoustic): Quick Identification Guide
To keep a Alfa Romeo GT windshield replacement on schedule, confirm which windshield technologies your Alfa Romeo GT actually uses before ordering glass. From the driver’s seat, a projected speed or navigation display—and HUD controls in the menus—usually means you need a HUD windshield. Next, check the wiper stalk for an “AUTO” position, which commonly indicates rain-sensing wipers and a rain/light sensor mounted behind the rearview mirror. Look for a plastic shroud in that mirror area; on many builds it also houses a forward-facing camera for lane assist or forward-collision features. For heated windshield options, look for a front-heated windshield button (windshield icon with wavy lines), then inspect the lower glass near the wiper-park zone in bright light for subtle filaments or a defined heated strip; some designs also use connector tabs at the edge of the glass. Acoustic laminated glass is easiest to confirm by the etched windshield “bug” in a corner, where manufacturer codes can identify acoustic or specialty variants; your build sheet may also call it out. If you’re unsure, send Bang AutoGlass photos of the bug and mirror area—we’ll verify the correct Alfa Romeo GT glass and schedule mobile service, often as soon as next day.
HUD Windshields on Alfa Romeo GT: Why “HUD-Compatible Glass” Matters (Double Images, Clarity, and Fit)
If your Alfa Romeo GT has a heads-up display, the biggest mistake is treating the windshield like standard laminated glass. A HUD uses the windshield to reflect a projected image at a precise angle. With non-HUD glass, light can bounce from both inner and outer surfaces, causing ghosting (a double image), low contrast, or a projection that looks shifted even when the HUD unit is working. HUD-compatible windshields prevent this with a specialized PVB interlayer and tight thickness control; many also include a subtle wedge that corrects the reflection path so you see one sharp image. Because the optics are sensitive, windshield geometry matters—curvature, seating depth, and mirror/sensor bracket placement can affect the display and may also impact rain/light sensors or forward-facing ADAS cameras mounted in the same area. The practical takeaway: order the correct part number and install to factory tolerances to protect visibility and technology performance. Bang AutoGlass verifies the proper HUD windshield for your Alfa Romeo GT and completes mobile installation at your location—often as soon as next day. Most installs take 30–45 minutes, and we recommend at least 1 hour of adhesive cure time. We include a lifetime workmanship warranty and accept all insurance companies when comprehensive coverage applies.
Rain/Light Sensors on Alfa Romeo GT: Mounting, Gel Pads, and Re-Initialization After Replacement
If your Alfa Romeo GT has an “AUTO” wiper setting, your Alfa Romeo GT windshield replacement must account for the rain/light sensor behind the mirror. The sensor reads through the glass, so a loose bracket, contamination, or trapped air can trigger constant wiping, delayed wipes, or no automatic response. The module clips into a specific mount and uses a clear coupling gel pad to remove microscopic air gaps between the sensor lens and the windshield. During replacement, the glass contact area must be spotless and the gel pad must be new and bubble-free—smears, fingerprints, or a reused pad can break the optical interface the system depends on. After the adhesive has cured, some Alfa Romeo GT systems relearn after an ignition cycle and short drive, while others require re-initialization via the vehicle menu or a scan tool to restore normal sensitivity and timing. Bang AutoGlass handles the sensor process end-to-end. We provide mobile auto glass service—often as soon as next day—finish most installs in 30–45 minutes, and recommend at least 1 hour of cure time before safe drive-away. Every install includes a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Heated Windshields for Alfa Romeo GT: Embedded Elements, Electrical Connectors, and What to Check After Install
A heated windshield is a specific Alfa Romeo GT glass option with built-in electrical components, not a standard laminate. The heating grid or conductive layer is inside the glass and connects through dedicated power tabs. For a Alfa Romeo GT windshield replacement, the new glass must match the factory heating design and connector locations—two windshields can look similar but use different tabs or zones, leaving the system only partly working or not working at all. During installation, protect the tabs and harness: tabs can crack if they’re pried or twisted, and wiring can be pinched if trim is forced back into place. A correct install reconnects terminals cleanly, secures the harness with factory clips, and confirms proper seating so trim fits correctly. If your Alfa Romeo GT also has a rain/light sensor, forward camera, or HUD, keeping mirror-area brackets aligned helps preserve feature performance. After cure time, test the heated windshield and confirm uniform clearing, then check for any visibility-system warning lights. Bang AutoGlass provides mobile heated windshield replacement—often as soon as next day—with most installs completed in 30–45 minutes plus at least 1 hour of cure time. Our work includes a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Acoustic Windshields on Alfa Romeo GT: What They Are, Why They Cost More, and Noise-Reduction Tradeoffs
Acoustic windshields are easy to overlook on Alfa Romeo GT—until the wrong glass is installed. They use a sound-damping PVB interlayer inside the laminate to reduce common highway noise, especially wind and tire frequencies that make the cabin louder at speed. During a Alfa Romeo GT windshield replacement, avoid an unintended downgrade: acoustic glass is not interchangeable with basic laminated glass if you want to keep the factory noise profile. Installing a standard laminate can increase wind rush and road hum, and it can feel like a sealing issue even when the install is perfect. Acoustic windshields cost more because materials and manufacturing controls are specialized, and availability varies by trim and model year. To confirm what your Alfa Romeo GT needs, photograph the windshield etching (“bug”) so the correct acoustic variant is sourced. Set expectations realistically—acoustic glass reduces certain frequencies, but it won’t eliminate all sound; tires, door seals, and insulation still matter. Bang AutoGlass can verify your Alfa Romeo GT glass and provide mobile replacement—often as soon as next day. Most installs take 30–45 minutes plus at least 1 hour of cure time. Our work includes a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Services
Service Areas
Alfa Romeo GT Windshield Technology Guide: HUD, Rain Sensors, Heated/Acoustic Glass, and What It Means for Replacement
Alfa Romeo GT Windshield Technology Guide: HUD, Rain Sensors, Heated/Acoustic Glass, and What It Means for Replacement
For many Alfa Romeo GT owners, a cracked windshield seems simple until built-in features stop working. Today’s Alfa Romeo GT windshields may be designed for HUD projections, rain-sensing wipers and light sensors, heated de-ice zones, and acoustic lamination for a quieter cabin. In certain packages, the upper windshield and mirror area also support forward-facing ADAS cameras, so replacement is as much about restoring system performance as replacing glass. A proper Alfa Romeo GT windshield replacement starts with the correct specification: the right glass variant (HUD, rain sensor, heated, acoustic) plus the correct brackets and mounting points that the vehicle expects. Using the wrong glass can reduce HUD clarity, cause sensor/camera faults, or create wind noise and leaks. Installation must also be controlled—clean prep, accurate placement, and a consistent urethane bond—so the windshield sits to factory tolerances and seals properly. Bang AutoGlass delivers fast, feature-correct results with mobile auto glass service at your home or workplace—often as soon as next day. Most installs take about 30–45 minutes, and we recommend waiting at least 1 hour for adhesive cure time before safe drive-away. Every job includes a lifetime workmanship warranty, and we accept all insurance companies when your policy includes comprehensive coverage.
How to Tell What Windshield Tech Your Alfa Romeo GT Has (HUD, Rain Sensor, Heated, Acoustic): Quick Identification Guide
To keep a Alfa Romeo GT windshield replacement on schedule, confirm which windshield technologies your Alfa Romeo GT actually uses before ordering glass. From the driver’s seat, a projected speed or navigation display—and HUD controls in the menus—usually means you need a HUD windshield. Next, check the wiper stalk for an “AUTO” position, which commonly indicates rain-sensing wipers and a rain/light sensor mounted behind the rearview mirror. Look for a plastic shroud in that mirror area; on many builds it also houses a forward-facing camera for lane assist or forward-collision features. For heated windshield options, look for a front-heated windshield button (windshield icon with wavy lines), then inspect the lower glass near the wiper-park zone in bright light for subtle filaments or a defined heated strip; some designs also use connector tabs at the edge of the glass. Acoustic laminated glass is easiest to confirm by the etched windshield “bug” in a corner, where manufacturer codes can identify acoustic or specialty variants; your build sheet may also call it out. If you’re unsure, send Bang AutoGlass photos of the bug and mirror area—we’ll verify the correct Alfa Romeo GT glass and schedule mobile service, often as soon as next day.
HUD Windshields on Alfa Romeo GT: Why “HUD-Compatible Glass” Matters (Double Images, Clarity, and Fit)
If your Alfa Romeo GT has a heads-up display, the biggest mistake is treating the windshield like standard laminated glass. A HUD uses the windshield to reflect a projected image at a precise angle. With non-HUD glass, light can bounce from both inner and outer surfaces, causing ghosting (a double image), low contrast, or a projection that looks shifted even when the HUD unit is working. HUD-compatible windshields prevent this with a specialized PVB interlayer and tight thickness control; many also include a subtle wedge that corrects the reflection path so you see one sharp image. Because the optics are sensitive, windshield geometry matters—curvature, seating depth, and mirror/sensor bracket placement can affect the display and may also impact rain/light sensors or forward-facing ADAS cameras mounted in the same area. The practical takeaway: order the correct part number and install to factory tolerances to protect visibility and technology performance. Bang AutoGlass verifies the proper HUD windshield for your Alfa Romeo GT and completes mobile installation at your location—often as soon as next day. Most installs take 30–45 minutes, and we recommend at least 1 hour of adhesive cure time. We include a lifetime workmanship warranty and accept all insurance companies when comprehensive coverage applies.
Rain/Light Sensors on Alfa Romeo GT: Mounting, Gel Pads, and Re-Initialization After Replacement
If your Alfa Romeo GT has an “AUTO” wiper setting, your Alfa Romeo GT windshield replacement must account for the rain/light sensor behind the mirror. The sensor reads through the glass, so a loose bracket, contamination, or trapped air can trigger constant wiping, delayed wipes, or no automatic response. The module clips into a specific mount and uses a clear coupling gel pad to remove microscopic air gaps between the sensor lens and the windshield. During replacement, the glass contact area must be spotless and the gel pad must be new and bubble-free—smears, fingerprints, or a reused pad can break the optical interface the system depends on. After the adhesive has cured, some Alfa Romeo GT systems relearn after an ignition cycle and short drive, while others require re-initialization via the vehicle menu or a scan tool to restore normal sensitivity and timing. Bang AutoGlass handles the sensor process end-to-end. We provide mobile auto glass service—often as soon as next day—finish most installs in 30–45 minutes, and recommend at least 1 hour of cure time before safe drive-away. Every install includes a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Heated Windshields for Alfa Romeo GT: Embedded Elements, Electrical Connectors, and What to Check After Install
A heated windshield is a specific Alfa Romeo GT glass option with built-in electrical components, not a standard laminate. The heating grid or conductive layer is inside the glass and connects through dedicated power tabs. For a Alfa Romeo GT windshield replacement, the new glass must match the factory heating design and connector locations—two windshields can look similar but use different tabs or zones, leaving the system only partly working or not working at all. During installation, protect the tabs and harness: tabs can crack if they’re pried or twisted, and wiring can be pinched if trim is forced back into place. A correct install reconnects terminals cleanly, secures the harness with factory clips, and confirms proper seating so trim fits correctly. If your Alfa Romeo GT also has a rain/light sensor, forward camera, or HUD, keeping mirror-area brackets aligned helps preserve feature performance. After cure time, test the heated windshield and confirm uniform clearing, then check for any visibility-system warning lights. Bang AutoGlass provides mobile heated windshield replacement—often as soon as next day—with most installs completed in 30–45 minutes plus at least 1 hour of cure time. Our work includes a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Acoustic Windshields on Alfa Romeo GT: What They Are, Why They Cost More, and Noise-Reduction Tradeoffs
Acoustic windshields are easy to overlook on Alfa Romeo GT—until the wrong glass is installed. They use a sound-damping PVB interlayer inside the laminate to reduce common highway noise, especially wind and tire frequencies that make the cabin louder at speed. During a Alfa Romeo GT windshield replacement, avoid an unintended downgrade: acoustic glass is not interchangeable with basic laminated glass if you want to keep the factory noise profile. Installing a standard laminate can increase wind rush and road hum, and it can feel like a sealing issue even when the install is perfect. Acoustic windshields cost more because materials and manufacturing controls are specialized, and availability varies by trim and model year. To confirm what your Alfa Romeo GT needs, photograph the windshield etching (“bug”) so the correct acoustic variant is sourced. Set expectations realistically—acoustic glass reduces certain frequencies, but it won’t eliminate all sound; tires, door seals, and insulation still matter. Bang AutoGlass can verify your Alfa Romeo GT glass and provide mobile replacement—often as soon as next day. Most installs take 30–45 minutes plus at least 1 hour of cure time. Our work includes a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Services
Service Areas
Alfa Romeo GT Windshield Technology Guide: HUD, Rain Sensors, Heated/Acoustic Glass, and What It Means for Replacement
Alfa Romeo GT Windshield Technology Guide: HUD, Rain Sensors, Heated/Acoustic Glass, and What It Means for Replacement
For many Alfa Romeo GT owners, a cracked windshield seems simple until built-in features stop working. Today’s Alfa Romeo GT windshields may be designed for HUD projections, rain-sensing wipers and light sensors, heated de-ice zones, and acoustic lamination for a quieter cabin. In certain packages, the upper windshield and mirror area also support forward-facing ADAS cameras, so replacement is as much about restoring system performance as replacing glass. A proper Alfa Romeo GT windshield replacement starts with the correct specification: the right glass variant (HUD, rain sensor, heated, acoustic) plus the correct brackets and mounting points that the vehicle expects. Using the wrong glass can reduce HUD clarity, cause sensor/camera faults, or create wind noise and leaks. Installation must also be controlled—clean prep, accurate placement, and a consistent urethane bond—so the windshield sits to factory tolerances and seals properly. Bang AutoGlass delivers fast, feature-correct results with mobile auto glass service at your home or workplace—often as soon as next day. Most installs take about 30–45 minutes, and we recommend waiting at least 1 hour for adhesive cure time before safe drive-away. Every job includes a lifetime workmanship warranty, and we accept all insurance companies when your policy includes comprehensive coverage.
How to Tell What Windshield Tech Your Alfa Romeo GT Has (HUD, Rain Sensor, Heated, Acoustic): Quick Identification Guide
To keep a Alfa Romeo GT windshield replacement on schedule, confirm which windshield technologies your Alfa Romeo GT actually uses before ordering glass. From the driver’s seat, a projected speed or navigation display—and HUD controls in the menus—usually means you need a HUD windshield. Next, check the wiper stalk for an “AUTO” position, which commonly indicates rain-sensing wipers and a rain/light sensor mounted behind the rearview mirror. Look for a plastic shroud in that mirror area; on many builds it also houses a forward-facing camera for lane assist or forward-collision features. For heated windshield options, look for a front-heated windshield button (windshield icon with wavy lines), then inspect the lower glass near the wiper-park zone in bright light for subtle filaments or a defined heated strip; some designs also use connector tabs at the edge of the glass. Acoustic laminated glass is easiest to confirm by the etched windshield “bug” in a corner, where manufacturer codes can identify acoustic or specialty variants; your build sheet may also call it out. If you’re unsure, send Bang AutoGlass photos of the bug and mirror area—we’ll verify the correct Alfa Romeo GT glass and schedule mobile service, often as soon as next day.
HUD Windshields on Alfa Romeo GT: Why “HUD-Compatible Glass” Matters (Double Images, Clarity, and Fit)
If your Alfa Romeo GT has a heads-up display, the biggest mistake is treating the windshield like standard laminated glass. A HUD uses the windshield to reflect a projected image at a precise angle. With non-HUD glass, light can bounce from both inner and outer surfaces, causing ghosting (a double image), low contrast, or a projection that looks shifted even when the HUD unit is working. HUD-compatible windshields prevent this with a specialized PVB interlayer and tight thickness control; many also include a subtle wedge that corrects the reflection path so you see one sharp image. Because the optics are sensitive, windshield geometry matters—curvature, seating depth, and mirror/sensor bracket placement can affect the display and may also impact rain/light sensors or forward-facing ADAS cameras mounted in the same area. The practical takeaway: order the correct part number and install to factory tolerances to protect visibility and technology performance. Bang AutoGlass verifies the proper HUD windshield for your Alfa Romeo GT and completes mobile installation at your location—often as soon as next day. Most installs take 30–45 minutes, and we recommend at least 1 hour of adhesive cure time. We include a lifetime workmanship warranty and accept all insurance companies when comprehensive coverage applies.
Rain/Light Sensors on Alfa Romeo GT: Mounting, Gel Pads, and Re-Initialization After Replacement
If your Alfa Romeo GT has an “AUTO” wiper setting, your Alfa Romeo GT windshield replacement must account for the rain/light sensor behind the mirror. The sensor reads through the glass, so a loose bracket, contamination, or trapped air can trigger constant wiping, delayed wipes, or no automatic response. The module clips into a specific mount and uses a clear coupling gel pad to remove microscopic air gaps between the sensor lens and the windshield. During replacement, the glass contact area must be spotless and the gel pad must be new and bubble-free—smears, fingerprints, or a reused pad can break the optical interface the system depends on. After the adhesive has cured, some Alfa Romeo GT systems relearn after an ignition cycle and short drive, while others require re-initialization via the vehicle menu or a scan tool to restore normal sensitivity and timing. Bang AutoGlass handles the sensor process end-to-end. We provide mobile auto glass service—often as soon as next day—finish most installs in 30–45 minutes, and recommend at least 1 hour of cure time before safe drive-away. Every install includes a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Heated Windshields for Alfa Romeo GT: Embedded Elements, Electrical Connectors, and What to Check After Install
A heated windshield is a specific Alfa Romeo GT glass option with built-in electrical components, not a standard laminate. The heating grid or conductive layer is inside the glass and connects through dedicated power tabs. For a Alfa Romeo GT windshield replacement, the new glass must match the factory heating design and connector locations—two windshields can look similar but use different tabs or zones, leaving the system only partly working or not working at all. During installation, protect the tabs and harness: tabs can crack if they’re pried or twisted, and wiring can be pinched if trim is forced back into place. A correct install reconnects terminals cleanly, secures the harness with factory clips, and confirms proper seating so trim fits correctly. If your Alfa Romeo GT also has a rain/light sensor, forward camera, or HUD, keeping mirror-area brackets aligned helps preserve feature performance. After cure time, test the heated windshield and confirm uniform clearing, then check for any visibility-system warning lights. Bang AutoGlass provides mobile heated windshield replacement—often as soon as next day—with most installs completed in 30–45 minutes plus at least 1 hour of cure time. Our work includes a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Acoustic Windshields on Alfa Romeo GT: What They Are, Why They Cost More, and Noise-Reduction Tradeoffs
Acoustic windshields are easy to overlook on Alfa Romeo GT—until the wrong glass is installed. They use a sound-damping PVB interlayer inside the laminate to reduce common highway noise, especially wind and tire frequencies that make the cabin louder at speed. During a Alfa Romeo GT windshield replacement, avoid an unintended downgrade: acoustic glass is not interchangeable with basic laminated glass if you want to keep the factory noise profile. Installing a standard laminate can increase wind rush and road hum, and it can feel like a sealing issue even when the install is perfect. Acoustic windshields cost more because materials and manufacturing controls are specialized, and availability varies by trim and model year. To confirm what your Alfa Romeo GT needs, photograph the windshield etching (“bug”) so the correct acoustic variant is sourced. Set expectations realistically—acoustic glass reduces certain frequencies, but it won’t eliminate all sound; tires, door seals, and insulation still matter. Bang AutoGlass can verify your Alfa Romeo GT glass and provide mobile replacement—often as soon as next day. Most installs take 30–45 minutes plus at least 1 hour of cure time. Our work includes a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Enjoy More Relevant Blogs
OEM vs. Aftermarket Glass for Alfa Romeo GT Windshield Replacement: Pros, Cons, and Best Choice
OEM vs aftermarket glass for Alfa Romeo GT windshield replacement: compare fit, clarity, and ADAS compatibility to pick the best value and safety for you.
Windshield Repair vs. Replacement for Your Alfa Romeo GT: When a Chip Can Be Fixed
Windshield repair vs replacement for your Alfa Romeo GT: learn when a chip can be fixed, when cracks require replacement, and how to save time and money.
Does Insurance Cover a Alfa Romeo GT Windshield Replacement? Deductibles, Claims, and Tips
Does insurance cover a Alfa Romeo GT windshield replacement? Understand deductibles, filing a claim, OEM vs aftermarket glass, and ways to save money.
Windshield Replacement Warranty for Alfa Romeo GT: What’s Covered (Leaks, Wind Noise) and How to Protect It
Windshield warranty for Alfa Romeo GT: what covers leaks and wind noise, how to protect coverage, and when to request an inspection if issues appear.
Mobile Windshield Replacement for Alfa Romeo GT: Same-Day Service, Timing, and What to Prepare
Mobile windshield replacement for Alfa Romeo GT: same-day service tips, what to prep, where we can work, and expected install and cure timing on-site.
ADAS Calibration After Alfa Romeo GT Windshield Replacement: Why It’s a Critical Safety Step
After Alfa Romeo GT windshield replacement, ADAS calibration helps keep lane assist and braking systems accurate. Learn when it is required and why now.
Alfa Romeo GT Windshield Replacement Cost: What to Expect (and How to Save)
Alfa Romeo GT windshield replacement cost: price drivers, OEM vs aftermarket options, ADAS calibration impacts, and practical ways to save on service.
How Long Does Alfa Romeo GT Windshield Replacement Take? Drive-Away Time and Curing Explained
How long does Alfa Romeo GT windshield replacement take? Get install time, safe drive-away timing, and urethane curing guidance so you can plan confidently.
Preventing Windshield Damage on a Alfa Romeo GT: Road Debris, Weather, and Maintenance Tips
Prevent windshield damage on Alfa Romeo GT with practical tips for road debris, weather changes, wiper care, and maintenance that reduces chips year-round.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm