Services
Service Areas
How Long Does Ferrari 550 Maranello Windshield Replacement Take? Drive-Away Time and Curing Explained
How Long Does Ferrari 550 Maranello Windshield Replacement Take? Drive-Away Time and Curing Explained
Wondering how long a Ferrari 550 Maranello windshield replacement takes? Think of it as install time plus cure time. On the mobile appointment, we remove the broken windshield, protect the interior and paint, prep the pinch weld, and apply a continuous bead of premium urethane before setting the new windshield to precise alignment. We reinstall exterior trim and moldings, clean the area, and verify fit, gaps, and seal integrity. For most Ferrari 550 Maranello vehicles, Bang AutoGlass completes the hands-on portion in about 30–45 minutes when there are no special complications. The remaining time is the “drive-away” wait: the urethane adhesive must gain strength before normal driving. Our standard minimum safe drive-away time is 1 hour, and we confirm the exact wait time on-site because temperature and humidity influence curing. Many customers plan for under two hours total from arrival to safe drive-away, with extra time possible for complex trim, rust repair, prior installation issues, or advanced driver-assistance features. If you’re searching for windshield replacement near me, we can often schedule next day, coordinate with all insurance companies when comprehensive coverage applies, and support the work with a lifetime workmanship warranty.
Ferrari 550 Maranello Windshield Replacement Timeline: Typical Appointment Time (Install + Cleanup + Quality Check)
A Ferrari 550 Maranello windshield replacement timeline is a series of safety-critical steps, not just “remove glass, install glass.” We start by verifying the correct windshield for your Ferrari 550 Maranello, including mirror buttons, rain sensors, and camera brackets, then protect the interior and paint and remove the trim needed for clean access. Next, we cut out the old windshield carefully and trim the remaining urethane on the pinch weld to the proper height so the new bead bonds correctly. Long-term results depend on prep. We inspect the bonding area for contamination, prior damage, bare metal, and corrosion. If rust is present, we perform the appropriate rust prep and primer steps to help prevent leaks, wind noise, and premature bond failure. We then clean and prime the new glass per the urethane system requirements, lay a continuous urethane bead, and set the windshield with factory-level alignment. After reinstalling moldings and exterior trim, we complete cleanup and a final quality check: fit/gap inspection and seal review. For most vehicles, Bang AutoGlass completes install + cleanup + verification in about 30–45 minutes on-site. Before you drive, we confirm your safe drive-away time and answer insurance questions, all supported by our lifetime workmanship warranty.
Safe Drive-Away Time (SDAT/MDAT): When You Can Drive After Ferrari 550 Maranello Windshield Replacement
After a Ferrari 550 Maranello windshield replacement, the key timing factor is Safe Drive-Away Time (SDAT), sometimes labeled Minimum Drive-Away Time (MDAT). SDAT is the period the vehicle must remain parked so the urethane adhesive can reach enough strength for normal driving. If the vehicle is moved too soon, the bond line can shift while it is still curing, which can lead to leaks, wind noise, and reduced performance in a crash. SDAT/MDAT depends on the adhesive system and the environment at the job site. Temperature and humidity matter because they change cure speed. At Bang AutoGlass, we confirm site conditions and follow manufacturer guidance, with a minimum 1 hour safe drive-away time on Ferrari 550 Maranello windshield replacements. In colder, drier, or rapidly changing conditions, we may extend that recommendation and explain why. While waiting, close doors gently, avoid rocking or jacking the vehicle, and keep the car stationary. Once cleared to drive, take a smooth first trip and avoid hard impacts. If insurance is involved, we coordinate with any carrier when comprehensive coverage applies and stand behind the work with a lifetime workmanship warranty.
Cure Time vs. Full Cure: When It’s Safe to Use Highways, Wash Your Car, and Remove Tape
After a Ferrari 550 Maranello windshield replacement, think “safe to drive” versus “fully cured.” Urethane adhesive builds strength in stages. Safe Drive-Away Time (SDAT/MDAT) is when the bond is strong enough for normal driving. Full cure comes later, when crosslinking finishes and the adhesive reaches its long-term strength and final seal. You can drive at SDAT, but day one should still be low-stress. Bang AutoGlass requires at least 1 hour SDAT for your Ferrari 550 Maranello, and we confirm the exact guidance on-site based on adhesive choice, temperature, and humidity. After you’re cleared, keep trips smooth: avoid rough roads, hard braking, and slamming doors. If practical, crack a window slightly for the first few hours to reduce cabin-pressure spikes. Highway driving is generally OK after SDAT, but postpone long highway trips until later the same day or the next day when you can. Avoid automated car washes and high-pressure wands for 24–48 hours. Gentle hand washing is safer after day one, but don’t spray at the windshield edges. If retention tape is applied, leave it on as directed and remove it gently. We’ll review aftercare before we finish.
What Changes the Time Estimate: Adhesive Type, Temperature/Humidity, Rust Prep, and Glass/Sensor Complexity
Time estimates for a Ferrari 550 Maranello windshield replacement vary because the plan is driven by adhesive chemistry, site conditions, and vehicle design—not just technician speed. The biggest factor is the urethane system. Different products have different working times and SDAT/MDAT ratings, and those ratings depend on temperature and humidity. Since urethane cures using ambient moisture, cold and dry weather typically slows cure speed, while warmer conditions with moderate humidity help the adhesive build strength faster. Next is pinch weld condition. If we find corrosion, damaged paint, bare metal, or contamination from a prior installation, we add time for correct cleaning, primer, and rust treatment. That prep is not optional; it’s the foundation for preventing leaks, wind noise, and premature bond failure. Vehicle trim can also add minutes. Some Ferrari 550 Maranello cowls, clips, and molding systems require careful disassembly to avoid breakage or cosmetic damage. Features like heated or acoustic glass, HUD cutouts, rain/light sensors, and camera brackets require precise placement and clean mounting surfaces. If your Ferrari 550 Maranello has ADAS, calibration may be required after replacement, adding time beyond the typical 30–45 minute on-site install. Bang AutoGlass keeps it simple with mobile service, next-day scheduling in many areas, insurance coordination, and a lifetime workmanship warranty.
Does ADAS Calibration Add Time for Ferrari 550 Maranello? Scans, Calibration Type, and Verification Steps
For many modern Ferrari 550 Maranello vehicles, windshield replacement is also an ADAS procedure because the glass can be the mounting surface and optical path for forward-facing cameras. If your Ferrari 550 Maranello has lane departure warning, automatic emergency braking, adaptive cruise control, or traffic sign recognition, ADAS calibration may be required after the new windshield is installed—even when the camera bracket is transferred correctly. ADAS time is usually added in three steps: a pre-scan, the calibration step, and a post-scan verification. The pre-scan checks for diagnostic trouble codes (DTCs) and documents system status before work begins. Calibration can be static, dynamic, or both depending on Ferrari 550 Maranello requirements. Static calibration uses targets, measured distances, controlled lighting, and precise alignment. Dynamic calibration is a guided drive so the camera can relearn lane markings and vehicle geometry. The post-scan confirms the system is communicating properly and within tolerance. Because requirements vary by Ferrari 550 Maranello trim and equipment, added time can range from a short add-on to a longer window that depends on space, equipment, and driving conditions. Bang AutoGlass will identify calibration needs, explain the method, and build it into your plan. We often schedule next day, work with all insurance companies when comprehensive coverage applies, and back our workmanship for life.
Services
Service Areas
How Long Does Ferrari 550 Maranello Windshield Replacement Take? Drive-Away Time and Curing Explained
How Long Does Ferrari 550 Maranello Windshield Replacement Take? Drive-Away Time and Curing Explained
Wondering how long a Ferrari 550 Maranello windshield replacement takes? Think of it as install time plus cure time. On the mobile appointment, we remove the broken windshield, protect the interior and paint, prep the pinch weld, and apply a continuous bead of premium urethane before setting the new windshield to precise alignment. We reinstall exterior trim and moldings, clean the area, and verify fit, gaps, and seal integrity. For most Ferrari 550 Maranello vehicles, Bang AutoGlass completes the hands-on portion in about 30–45 minutes when there are no special complications. The remaining time is the “drive-away” wait: the urethane adhesive must gain strength before normal driving. Our standard minimum safe drive-away time is 1 hour, and we confirm the exact wait time on-site because temperature and humidity influence curing. Many customers plan for under two hours total from arrival to safe drive-away, with extra time possible for complex trim, rust repair, prior installation issues, or advanced driver-assistance features. If you’re searching for windshield replacement near me, we can often schedule next day, coordinate with all insurance companies when comprehensive coverage applies, and support the work with a lifetime workmanship warranty.
Ferrari 550 Maranello Windshield Replacement Timeline: Typical Appointment Time (Install + Cleanup + Quality Check)
A Ferrari 550 Maranello windshield replacement timeline is a series of safety-critical steps, not just “remove glass, install glass.” We start by verifying the correct windshield for your Ferrari 550 Maranello, including mirror buttons, rain sensors, and camera brackets, then protect the interior and paint and remove the trim needed for clean access. Next, we cut out the old windshield carefully and trim the remaining urethane on the pinch weld to the proper height so the new bead bonds correctly. Long-term results depend on prep. We inspect the bonding area for contamination, prior damage, bare metal, and corrosion. If rust is present, we perform the appropriate rust prep and primer steps to help prevent leaks, wind noise, and premature bond failure. We then clean and prime the new glass per the urethane system requirements, lay a continuous urethane bead, and set the windshield with factory-level alignment. After reinstalling moldings and exterior trim, we complete cleanup and a final quality check: fit/gap inspection and seal review. For most vehicles, Bang AutoGlass completes install + cleanup + verification in about 30–45 minutes on-site. Before you drive, we confirm your safe drive-away time and answer insurance questions, all supported by our lifetime workmanship warranty.
Safe Drive-Away Time (SDAT/MDAT): When You Can Drive After Ferrari 550 Maranello Windshield Replacement
After a Ferrari 550 Maranello windshield replacement, the key timing factor is Safe Drive-Away Time (SDAT), sometimes labeled Minimum Drive-Away Time (MDAT). SDAT is the period the vehicle must remain parked so the urethane adhesive can reach enough strength for normal driving. If the vehicle is moved too soon, the bond line can shift while it is still curing, which can lead to leaks, wind noise, and reduced performance in a crash. SDAT/MDAT depends on the adhesive system and the environment at the job site. Temperature and humidity matter because they change cure speed. At Bang AutoGlass, we confirm site conditions and follow manufacturer guidance, with a minimum 1 hour safe drive-away time on Ferrari 550 Maranello windshield replacements. In colder, drier, or rapidly changing conditions, we may extend that recommendation and explain why. While waiting, close doors gently, avoid rocking or jacking the vehicle, and keep the car stationary. Once cleared to drive, take a smooth first trip and avoid hard impacts. If insurance is involved, we coordinate with any carrier when comprehensive coverage applies and stand behind the work with a lifetime workmanship warranty.
Cure Time vs. Full Cure: When It’s Safe to Use Highways, Wash Your Car, and Remove Tape
After a Ferrari 550 Maranello windshield replacement, think “safe to drive” versus “fully cured.” Urethane adhesive builds strength in stages. Safe Drive-Away Time (SDAT/MDAT) is when the bond is strong enough for normal driving. Full cure comes later, when crosslinking finishes and the adhesive reaches its long-term strength and final seal. You can drive at SDAT, but day one should still be low-stress. Bang AutoGlass requires at least 1 hour SDAT for your Ferrari 550 Maranello, and we confirm the exact guidance on-site based on adhesive choice, temperature, and humidity. After you’re cleared, keep trips smooth: avoid rough roads, hard braking, and slamming doors. If practical, crack a window slightly for the first few hours to reduce cabin-pressure spikes. Highway driving is generally OK after SDAT, but postpone long highway trips until later the same day or the next day when you can. Avoid automated car washes and high-pressure wands for 24–48 hours. Gentle hand washing is safer after day one, but don’t spray at the windshield edges. If retention tape is applied, leave it on as directed and remove it gently. We’ll review aftercare before we finish.
What Changes the Time Estimate: Adhesive Type, Temperature/Humidity, Rust Prep, and Glass/Sensor Complexity
Time estimates for a Ferrari 550 Maranello windshield replacement vary because the plan is driven by adhesive chemistry, site conditions, and vehicle design—not just technician speed. The biggest factor is the urethane system. Different products have different working times and SDAT/MDAT ratings, and those ratings depend on temperature and humidity. Since urethane cures using ambient moisture, cold and dry weather typically slows cure speed, while warmer conditions with moderate humidity help the adhesive build strength faster. Next is pinch weld condition. If we find corrosion, damaged paint, bare metal, or contamination from a prior installation, we add time for correct cleaning, primer, and rust treatment. That prep is not optional; it’s the foundation for preventing leaks, wind noise, and premature bond failure. Vehicle trim can also add minutes. Some Ferrari 550 Maranello cowls, clips, and molding systems require careful disassembly to avoid breakage or cosmetic damage. Features like heated or acoustic glass, HUD cutouts, rain/light sensors, and camera brackets require precise placement and clean mounting surfaces. If your Ferrari 550 Maranello has ADAS, calibration may be required after replacement, adding time beyond the typical 30–45 minute on-site install. Bang AutoGlass keeps it simple with mobile service, next-day scheduling in many areas, insurance coordination, and a lifetime workmanship warranty.
Does ADAS Calibration Add Time for Ferrari 550 Maranello? Scans, Calibration Type, and Verification Steps
For many modern Ferrari 550 Maranello vehicles, windshield replacement is also an ADAS procedure because the glass can be the mounting surface and optical path for forward-facing cameras. If your Ferrari 550 Maranello has lane departure warning, automatic emergency braking, adaptive cruise control, or traffic sign recognition, ADAS calibration may be required after the new windshield is installed—even when the camera bracket is transferred correctly. ADAS time is usually added in three steps: a pre-scan, the calibration step, and a post-scan verification. The pre-scan checks for diagnostic trouble codes (DTCs) and documents system status before work begins. Calibration can be static, dynamic, or both depending on Ferrari 550 Maranello requirements. Static calibration uses targets, measured distances, controlled lighting, and precise alignment. Dynamic calibration is a guided drive so the camera can relearn lane markings and vehicle geometry. The post-scan confirms the system is communicating properly and within tolerance. Because requirements vary by Ferrari 550 Maranello trim and equipment, added time can range from a short add-on to a longer window that depends on space, equipment, and driving conditions. Bang AutoGlass will identify calibration needs, explain the method, and build it into your plan. We often schedule next day, work with all insurance companies when comprehensive coverage applies, and back our workmanship for life.
Services
Service Areas
How Long Does Ferrari 550 Maranello Windshield Replacement Take? Drive-Away Time and Curing Explained
How Long Does Ferrari 550 Maranello Windshield Replacement Take? Drive-Away Time and Curing Explained
Wondering how long a Ferrari 550 Maranello windshield replacement takes? Think of it as install time plus cure time. On the mobile appointment, we remove the broken windshield, protect the interior and paint, prep the pinch weld, and apply a continuous bead of premium urethane before setting the new windshield to precise alignment. We reinstall exterior trim and moldings, clean the area, and verify fit, gaps, and seal integrity. For most Ferrari 550 Maranello vehicles, Bang AutoGlass completes the hands-on portion in about 30–45 minutes when there are no special complications. The remaining time is the “drive-away” wait: the urethane adhesive must gain strength before normal driving. Our standard minimum safe drive-away time is 1 hour, and we confirm the exact wait time on-site because temperature and humidity influence curing. Many customers plan for under two hours total from arrival to safe drive-away, with extra time possible for complex trim, rust repair, prior installation issues, or advanced driver-assistance features. If you’re searching for windshield replacement near me, we can often schedule next day, coordinate with all insurance companies when comprehensive coverage applies, and support the work with a lifetime workmanship warranty.
Ferrari 550 Maranello Windshield Replacement Timeline: Typical Appointment Time (Install + Cleanup + Quality Check)
A Ferrari 550 Maranello windshield replacement timeline is a series of safety-critical steps, not just “remove glass, install glass.” We start by verifying the correct windshield for your Ferrari 550 Maranello, including mirror buttons, rain sensors, and camera brackets, then protect the interior and paint and remove the trim needed for clean access. Next, we cut out the old windshield carefully and trim the remaining urethane on the pinch weld to the proper height so the new bead bonds correctly. Long-term results depend on prep. We inspect the bonding area for contamination, prior damage, bare metal, and corrosion. If rust is present, we perform the appropriate rust prep and primer steps to help prevent leaks, wind noise, and premature bond failure. We then clean and prime the new glass per the urethane system requirements, lay a continuous urethane bead, and set the windshield with factory-level alignment. After reinstalling moldings and exterior trim, we complete cleanup and a final quality check: fit/gap inspection and seal review. For most vehicles, Bang AutoGlass completes install + cleanup + verification in about 30–45 minutes on-site. Before you drive, we confirm your safe drive-away time and answer insurance questions, all supported by our lifetime workmanship warranty.
Safe Drive-Away Time (SDAT/MDAT): When You Can Drive After Ferrari 550 Maranello Windshield Replacement
After a Ferrari 550 Maranello windshield replacement, the key timing factor is Safe Drive-Away Time (SDAT), sometimes labeled Minimum Drive-Away Time (MDAT). SDAT is the period the vehicle must remain parked so the urethane adhesive can reach enough strength for normal driving. If the vehicle is moved too soon, the bond line can shift while it is still curing, which can lead to leaks, wind noise, and reduced performance in a crash. SDAT/MDAT depends on the adhesive system and the environment at the job site. Temperature and humidity matter because they change cure speed. At Bang AutoGlass, we confirm site conditions and follow manufacturer guidance, with a minimum 1 hour safe drive-away time on Ferrari 550 Maranello windshield replacements. In colder, drier, or rapidly changing conditions, we may extend that recommendation and explain why. While waiting, close doors gently, avoid rocking or jacking the vehicle, and keep the car stationary. Once cleared to drive, take a smooth first trip and avoid hard impacts. If insurance is involved, we coordinate with any carrier when comprehensive coverage applies and stand behind the work with a lifetime workmanship warranty.
Cure Time vs. Full Cure: When It’s Safe to Use Highways, Wash Your Car, and Remove Tape
After a Ferrari 550 Maranello windshield replacement, think “safe to drive” versus “fully cured.” Urethane adhesive builds strength in stages. Safe Drive-Away Time (SDAT/MDAT) is when the bond is strong enough for normal driving. Full cure comes later, when crosslinking finishes and the adhesive reaches its long-term strength and final seal. You can drive at SDAT, but day one should still be low-stress. Bang AutoGlass requires at least 1 hour SDAT for your Ferrari 550 Maranello, and we confirm the exact guidance on-site based on adhesive choice, temperature, and humidity. After you’re cleared, keep trips smooth: avoid rough roads, hard braking, and slamming doors. If practical, crack a window slightly for the first few hours to reduce cabin-pressure spikes. Highway driving is generally OK after SDAT, but postpone long highway trips until later the same day or the next day when you can. Avoid automated car washes and high-pressure wands for 24–48 hours. Gentle hand washing is safer after day one, but don’t spray at the windshield edges. If retention tape is applied, leave it on as directed and remove it gently. We’ll review aftercare before we finish.
What Changes the Time Estimate: Adhesive Type, Temperature/Humidity, Rust Prep, and Glass/Sensor Complexity
Time estimates for a Ferrari 550 Maranello windshield replacement vary because the plan is driven by adhesive chemistry, site conditions, and vehicle design—not just technician speed. The biggest factor is the urethane system. Different products have different working times and SDAT/MDAT ratings, and those ratings depend on temperature and humidity. Since urethane cures using ambient moisture, cold and dry weather typically slows cure speed, while warmer conditions with moderate humidity help the adhesive build strength faster. Next is pinch weld condition. If we find corrosion, damaged paint, bare metal, or contamination from a prior installation, we add time for correct cleaning, primer, and rust treatment. That prep is not optional; it’s the foundation for preventing leaks, wind noise, and premature bond failure. Vehicle trim can also add minutes. Some Ferrari 550 Maranello cowls, clips, and molding systems require careful disassembly to avoid breakage or cosmetic damage. Features like heated or acoustic glass, HUD cutouts, rain/light sensors, and camera brackets require precise placement and clean mounting surfaces. If your Ferrari 550 Maranello has ADAS, calibration may be required after replacement, adding time beyond the typical 30–45 minute on-site install. Bang AutoGlass keeps it simple with mobile service, next-day scheduling in many areas, insurance coordination, and a lifetime workmanship warranty.
Does ADAS Calibration Add Time for Ferrari 550 Maranello? Scans, Calibration Type, and Verification Steps
For many modern Ferrari 550 Maranello vehicles, windshield replacement is also an ADAS procedure because the glass can be the mounting surface and optical path for forward-facing cameras. If your Ferrari 550 Maranello has lane departure warning, automatic emergency braking, adaptive cruise control, or traffic sign recognition, ADAS calibration may be required after the new windshield is installed—even when the camera bracket is transferred correctly. ADAS time is usually added in three steps: a pre-scan, the calibration step, and a post-scan verification. The pre-scan checks for diagnostic trouble codes (DTCs) and documents system status before work begins. Calibration can be static, dynamic, or both depending on Ferrari 550 Maranello requirements. Static calibration uses targets, measured distances, controlled lighting, and precise alignment. Dynamic calibration is a guided drive so the camera can relearn lane markings and vehicle geometry. The post-scan confirms the system is communicating properly and within tolerance. Because requirements vary by Ferrari 550 Maranello trim and equipment, added time can range from a short add-on to a longer window that depends on space, equipment, and driving conditions. Bang AutoGlass will identify calibration needs, explain the method, and build it into your plan. We often schedule next day, work with all insurance companies when comprehensive coverage applies, and back our workmanship for life.
Enjoy More Relevant Blogs
ADAS Calibration After Ferrari 550 Maranello Windshield Replacement: Why It’s a Critical Safety Step
After Ferrari 550 Maranello windshield replacement, ADAS calibration helps keep lane assist and braking systems accurate. Learn when it is required and why now.
Does Insurance Cover a Ferrari 550 Maranello Windshield Replacement? Deductibles, Claims, and Tips
Does insurance cover a Ferrari 550 Maranello windshield replacement? Understand deductibles, filing a claim, OEM vs aftermarket glass, and ways to save money.
Preventing Windshield Damage on a Ferrari 550 Maranello: Road Debris, Weather, and Maintenance Tips
Prevent windshield damage on Ferrari 550 Maranello with practical tips for road debris, weather changes, wiper care, and maintenance that reduces chips year-round.
OEM vs. Aftermarket Glass for Ferrari 550 Maranello Windshield Replacement: Pros, Cons, and Best Choice
OEM vs aftermarket glass for Ferrari 550 Maranello windshield replacement: compare fit, clarity, and ADAS compatibility to pick the best value and safety for you.
Ferrari 550 Maranello Windshield Replacement Cost: What to Expect (and How to Save)
Ferrari 550 Maranello windshield replacement cost: price drivers, OEM vs aftermarket options, ADAS calibration impacts, and practical ways to save on service.
Windshield Repair vs. Replacement for Your Ferrari 550 Maranello: When a Chip Can Be Fixed
Windshield repair vs replacement for your Ferrari 550 Maranello: learn when a chip can be fixed, when cracks require replacement, and how to save time and money.
Mobile Windshield Replacement for Ferrari 550 Maranello: Same-Day Service, Timing, and What to Prepare
Mobile windshield replacement for Ferrari 550 Maranello: same-day service tips, what to prep, where we can work, and expected install and cure timing on-site.
Ferrari 550 Maranello Windshield Technology Guide: HUD, Rain Sensors, Heated/Acoustic Glass, and What It Means for Replacement
Ferrari 550 Maranello windshield tech explained—HUD, rain sensors, heated and acoustic glass. Learn how features affect replacement parts, pricing, and calibration.
Windshield Replacement Warranty for Ferrari 550 Maranello: What’s Covered (Leaks, Wind Noise) and How to Protect It
Windshield warranty for Ferrari 550 Maranello: what covers leaks and wind noise, how to protect coverage, and when to request an inspection if issues appear.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm