Services
Service Areas
How Long Does Land Rover Freelander Windshield Replacement Take? Drive-Away Time and Curing Explained
How Long Does Land Rover Freelander Windshield Replacement Take? Drive-Away Time and Curing Explained
The question “How long does a Land Rover Freelander windshield replacement take?” has two parts: installation time and the urethane wait before safe driving. The install includes removing the broken windshield, protecting the dash and paint, trimming old adhesive to a stable bonding base, and prepping the pinch weld so the new glass bonds correctly. We apply the required primer/activator, lay a consistent urethane bead, and set the windshield with accurate positioning so the seal line is even. Trim and moldings are reinstalled, followed by cleanup and a final inspection. For most Land Rover Freelander windshields, Bang AutoGlass completes the hands-on portion in roughly 30–45 minutes when there are no special challenges. The remaining time is the adhesive cure window. Our mobile service requires a minimum 1 hour safe drive-away time, which we confirm on-site based on temperature and humidity. Many customers plan for under two hours total, but allow extra time for complex trim, rust prep, prior installation issues, or vehicles with cameras and sensors. If you need windshield replacement near me, we can often schedule next day, handle insurance with any carrier when comprehensive coverage applies, and protect the work with a lifetime workmanship warranty.
Land Rover Freelander Windshield Replacement Timeline: Typical Appointment Time (Install + Cleanup + Quality Check)
A dependable Land Rover Freelander windshield replacement timeline is built on process control. We begin by confirming the correct windshield and options for your Land Rover Freelander—mirror mount, rain sensor pad, camera bracket style, and molding variations—then protect the interior, hood, and A-pillars and remove the trim needed for access. Next, we cut out the old windshield carefully and trim the remaining urethane to the proper height so the new bead bonds as designed. Then we focus on the bonding area. We inspect the pinch weld for contamination, bare metal, prior damage, and corrosion. If rust is present, we perform the appropriate rust prep and primer steps to help prevent leaks, wind noise, and premature bond failure. Once the surface is ready, we clean and prime the new glass per the urethane system requirements, lay a continuous urethane bead, and set the windshield with accurate alignment. After reinstalling moldings and exterior trim, we finish with cleanup and a quality check (fit/gap review and seal inspection). For most vehicles, Bang AutoGlass completes install + cleanup + verification in about 30–45 minutes on-site. Before you drive, we confirm safe drive-away time and address scheduling or insurance questions, backed by our lifetime workmanship warranty.
Safe Drive-Away Time (SDAT/MDAT): When You Can Drive After Land Rover Freelander Windshield Replacement
Safe Drive-Away Time (SDAT), also called Minimum Drive-Away Time (MDAT), is the minimum period your Land Rover Freelander must remain parked after windshield replacement so the urethane adhesive reaches safe working strength. This is a safety requirement: the windshield supports vehicle structural integrity and can affect passenger-side airbag performance. Driving too soon can disturb the fresh bond line before it has built enough strength. SDAT/MDAT is not one fixed number. It varies by adhesive product and job-site conditions—especially temperature and humidity. Colder or drier conditions typically slow curing, while moderate warmth and humidity help urethane gain strength faster. For Land Rover Freelander windshield replacement, Bang AutoGlass uses a clear baseline: a minimum 1 hour safe drive-away time after the adhesive is applied. If conditions are unfavorable, we recommend additional waiting time and explain the rationale on-site. While you wait, keep the vehicle stationary, close doors gently (avoid pressure spikes), and avoid jacking the vehicle. Once cleared to drive, take a smooth first trip and avoid potholes or aggressive maneuvers. Need scheduling help or an insurance claim? We work with all insurance companies when comprehensive coverage applies and back every job with a lifetime workmanship warranty.
Cure Time vs. Full Cure: When It’s Safe to Use Highways, Wash Your Car, and Remove Tape
Cure time and full cure aren’t the same for your Land Rover Freelander windshield replacement. Cure time is the Safe Drive-Away Time (SDAT/MDAT): when the urethane adhesive has enough strength for normal driving. Full cure happens later, after the adhesive finishes crosslinking and reaches its long-term bond strength and weather-tight seal. At Bang AutoGlass, we confirm SDAT on-site and require at least 1 hour before you drive your Land Rover Freelander. After SDAT, drive—but treat the first day as “gentle use.” Avoid rough roads, hard braking, and slamming doors; sudden cabin-pressure spikes can stress a fresh seal. If you can, crack a window slightly for the first few hours to reduce pressure. Highway driving is usually fine once cleared, but long trips create sustained wind load and body flex. When possible, postpone extended highway runs until later the same day or the next day, especially in cold or very dry weather. For aftercare, skip automated car washes and high-pressure spray for 24–48 hours. Light hand washing is safer after day one, but don’t aim water at the windshield edges. If we apply retention tape, leave it on for the recommended period (often until the next day) and remove it slowly. We’ll review these steps before finishing your mobile windshield replacement.
What Changes the Time Estimate: Adhesive Type, Temperature/Humidity, Rust Prep, and Glass/Sensor Complexity
Time estimates for a Land Rover Freelander windshield replacement vary because the plan is driven by adhesive chemistry, site conditions, and vehicle design—not just technician speed. The biggest factor is the urethane system. Different products have different working times and SDAT/MDAT ratings, and those ratings depend on temperature and humidity. Since urethane cures using ambient moisture, cold and dry weather typically slows cure speed, while warmer conditions with moderate humidity help the adhesive build strength faster. Next is pinch weld condition. If we find corrosion, damaged paint, bare metal, or contamination from a prior installation, we add time for correct cleaning, primer, and rust treatment. That prep is not optional; it’s the foundation for preventing leaks, wind noise, and premature bond failure. Vehicle trim can also add minutes. Some Land Rover Freelander cowls, clips, and molding systems require careful disassembly to avoid breakage or cosmetic damage. Features like heated or acoustic glass, HUD cutouts, rain/light sensors, and camera brackets require precise placement and clean mounting surfaces. If your Land Rover Freelander has ADAS, calibration may be required after replacement, adding time beyond the typical 30–45 minute on-site install. Bang AutoGlass keeps it simple with mobile service, next-day scheduling in many areas, insurance coordination, and a lifetime workmanship warranty.
Does ADAS Calibration Add Time for Land Rover Freelander? Scans, Calibration Type, and Verification Steps
For many modern Land Rover Freelander vehicles, windshield replacement is also an ADAS procedure because the glass can be the mounting surface and optical path for forward-facing cameras. If your Land Rover Freelander has lane departure warning, automatic emergency braking, adaptive cruise control, or traffic sign recognition, ADAS calibration may be required after the new windshield is installed—even when the camera bracket is transferred correctly. ADAS time is usually added in three steps: a pre-scan, the calibration step, and a post-scan verification. The pre-scan checks for diagnostic trouble codes (DTCs) and documents system status before work begins. Calibration can be static, dynamic, or both depending on Land Rover Freelander requirements. Static calibration uses targets, measured distances, controlled lighting, and precise alignment. Dynamic calibration is a guided drive so the camera can relearn lane markings and vehicle geometry. The post-scan confirms the system is communicating properly and within tolerance. Because requirements vary by Land Rover Freelander trim and equipment, added time can range from a short add-on to a longer window that depends on space, equipment, and driving conditions. Bang AutoGlass will identify calibration needs, explain the method, and build it into your plan. We often schedule next day, work with all insurance companies when comprehensive coverage applies, and back our workmanship for life.
Services
Service Areas
How Long Does Land Rover Freelander Windshield Replacement Take? Drive-Away Time and Curing Explained
How Long Does Land Rover Freelander Windshield Replacement Take? Drive-Away Time and Curing Explained
The question “How long does a Land Rover Freelander windshield replacement take?” has two parts: installation time and the urethane wait before safe driving. The install includes removing the broken windshield, protecting the dash and paint, trimming old adhesive to a stable bonding base, and prepping the pinch weld so the new glass bonds correctly. We apply the required primer/activator, lay a consistent urethane bead, and set the windshield with accurate positioning so the seal line is even. Trim and moldings are reinstalled, followed by cleanup and a final inspection. For most Land Rover Freelander windshields, Bang AutoGlass completes the hands-on portion in roughly 30–45 minutes when there are no special challenges. The remaining time is the adhesive cure window. Our mobile service requires a minimum 1 hour safe drive-away time, which we confirm on-site based on temperature and humidity. Many customers plan for under two hours total, but allow extra time for complex trim, rust prep, prior installation issues, or vehicles with cameras and sensors. If you need windshield replacement near me, we can often schedule next day, handle insurance with any carrier when comprehensive coverage applies, and protect the work with a lifetime workmanship warranty.
Land Rover Freelander Windshield Replacement Timeline: Typical Appointment Time (Install + Cleanup + Quality Check)
A dependable Land Rover Freelander windshield replacement timeline is built on process control. We begin by confirming the correct windshield and options for your Land Rover Freelander—mirror mount, rain sensor pad, camera bracket style, and molding variations—then protect the interior, hood, and A-pillars and remove the trim needed for access. Next, we cut out the old windshield carefully and trim the remaining urethane to the proper height so the new bead bonds as designed. Then we focus on the bonding area. We inspect the pinch weld for contamination, bare metal, prior damage, and corrosion. If rust is present, we perform the appropriate rust prep and primer steps to help prevent leaks, wind noise, and premature bond failure. Once the surface is ready, we clean and prime the new glass per the urethane system requirements, lay a continuous urethane bead, and set the windshield with accurate alignment. After reinstalling moldings and exterior trim, we finish with cleanup and a quality check (fit/gap review and seal inspection). For most vehicles, Bang AutoGlass completes install + cleanup + verification in about 30–45 minutes on-site. Before you drive, we confirm safe drive-away time and address scheduling or insurance questions, backed by our lifetime workmanship warranty.
Safe Drive-Away Time (SDAT/MDAT): When You Can Drive After Land Rover Freelander Windshield Replacement
Safe Drive-Away Time (SDAT), also called Minimum Drive-Away Time (MDAT), is the minimum period your Land Rover Freelander must remain parked after windshield replacement so the urethane adhesive reaches safe working strength. This is a safety requirement: the windshield supports vehicle structural integrity and can affect passenger-side airbag performance. Driving too soon can disturb the fresh bond line before it has built enough strength. SDAT/MDAT is not one fixed number. It varies by adhesive product and job-site conditions—especially temperature and humidity. Colder or drier conditions typically slow curing, while moderate warmth and humidity help urethane gain strength faster. For Land Rover Freelander windshield replacement, Bang AutoGlass uses a clear baseline: a minimum 1 hour safe drive-away time after the adhesive is applied. If conditions are unfavorable, we recommend additional waiting time and explain the rationale on-site. While you wait, keep the vehicle stationary, close doors gently (avoid pressure spikes), and avoid jacking the vehicle. Once cleared to drive, take a smooth first trip and avoid potholes or aggressive maneuvers. Need scheduling help or an insurance claim? We work with all insurance companies when comprehensive coverage applies and back every job with a lifetime workmanship warranty.
Cure Time vs. Full Cure: When It’s Safe to Use Highways, Wash Your Car, and Remove Tape
Cure time and full cure aren’t the same for your Land Rover Freelander windshield replacement. Cure time is the Safe Drive-Away Time (SDAT/MDAT): when the urethane adhesive has enough strength for normal driving. Full cure happens later, after the adhesive finishes crosslinking and reaches its long-term bond strength and weather-tight seal. At Bang AutoGlass, we confirm SDAT on-site and require at least 1 hour before you drive your Land Rover Freelander. After SDAT, drive—but treat the first day as “gentle use.” Avoid rough roads, hard braking, and slamming doors; sudden cabin-pressure spikes can stress a fresh seal. If you can, crack a window slightly for the first few hours to reduce pressure. Highway driving is usually fine once cleared, but long trips create sustained wind load and body flex. When possible, postpone extended highway runs until later the same day or the next day, especially in cold or very dry weather. For aftercare, skip automated car washes and high-pressure spray for 24–48 hours. Light hand washing is safer after day one, but don’t aim water at the windshield edges. If we apply retention tape, leave it on for the recommended period (often until the next day) and remove it slowly. We’ll review these steps before finishing your mobile windshield replacement.
What Changes the Time Estimate: Adhesive Type, Temperature/Humidity, Rust Prep, and Glass/Sensor Complexity
Time estimates for a Land Rover Freelander windshield replacement vary because the plan is driven by adhesive chemistry, site conditions, and vehicle design—not just technician speed. The biggest factor is the urethane system. Different products have different working times and SDAT/MDAT ratings, and those ratings depend on temperature and humidity. Since urethane cures using ambient moisture, cold and dry weather typically slows cure speed, while warmer conditions with moderate humidity help the adhesive build strength faster. Next is pinch weld condition. If we find corrosion, damaged paint, bare metal, or contamination from a prior installation, we add time for correct cleaning, primer, and rust treatment. That prep is not optional; it’s the foundation for preventing leaks, wind noise, and premature bond failure. Vehicle trim can also add minutes. Some Land Rover Freelander cowls, clips, and molding systems require careful disassembly to avoid breakage or cosmetic damage. Features like heated or acoustic glass, HUD cutouts, rain/light sensors, and camera brackets require precise placement and clean mounting surfaces. If your Land Rover Freelander has ADAS, calibration may be required after replacement, adding time beyond the typical 30–45 minute on-site install. Bang AutoGlass keeps it simple with mobile service, next-day scheduling in many areas, insurance coordination, and a lifetime workmanship warranty.
Does ADAS Calibration Add Time for Land Rover Freelander? Scans, Calibration Type, and Verification Steps
For many modern Land Rover Freelander vehicles, windshield replacement is also an ADAS procedure because the glass can be the mounting surface and optical path for forward-facing cameras. If your Land Rover Freelander has lane departure warning, automatic emergency braking, adaptive cruise control, or traffic sign recognition, ADAS calibration may be required after the new windshield is installed—even when the camera bracket is transferred correctly. ADAS time is usually added in three steps: a pre-scan, the calibration step, and a post-scan verification. The pre-scan checks for diagnostic trouble codes (DTCs) and documents system status before work begins. Calibration can be static, dynamic, or both depending on Land Rover Freelander requirements. Static calibration uses targets, measured distances, controlled lighting, and precise alignment. Dynamic calibration is a guided drive so the camera can relearn lane markings and vehicle geometry. The post-scan confirms the system is communicating properly and within tolerance. Because requirements vary by Land Rover Freelander trim and equipment, added time can range from a short add-on to a longer window that depends on space, equipment, and driving conditions. Bang AutoGlass will identify calibration needs, explain the method, and build it into your plan. We often schedule next day, work with all insurance companies when comprehensive coverage applies, and back our workmanship for life.
Services
Service Areas
How Long Does Land Rover Freelander Windshield Replacement Take? Drive-Away Time and Curing Explained
How Long Does Land Rover Freelander Windshield Replacement Take? Drive-Away Time and Curing Explained
The question “How long does a Land Rover Freelander windshield replacement take?” has two parts: installation time and the urethane wait before safe driving. The install includes removing the broken windshield, protecting the dash and paint, trimming old adhesive to a stable bonding base, and prepping the pinch weld so the new glass bonds correctly. We apply the required primer/activator, lay a consistent urethane bead, and set the windshield with accurate positioning so the seal line is even. Trim and moldings are reinstalled, followed by cleanup and a final inspection. For most Land Rover Freelander windshields, Bang AutoGlass completes the hands-on portion in roughly 30–45 minutes when there are no special challenges. The remaining time is the adhesive cure window. Our mobile service requires a minimum 1 hour safe drive-away time, which we confirm on-site based on temperature and humidity. Many customers plan for under two hours total, but allow extra time for complex trim, rust prep, prior installation issues, or vehicles with cameras and sensors. If you need windshield replacement near me, we can often schedule next day, handle insurance with any carrier when comprehensive coverage applies, and protect the work with a lifetime workmanship warranty.
Land Rover Freelander Windshield Replacement Timeline: Typical Appointment Time (Install + Cleanup + Quality Check)
A dependable Land Rover Freelander windshield replacement timeline is built on process control. We begin by confirming the correct windshield and options for your Land Rover Freelander—mirror mount, rain sensor pad, camera bracket style, and molding variations—then protect the interior, hood, and A-pillars and remove the trim needed for access. Next, we cut out the old windshield carefully and trim the remaining urethane to the proper height so the new bead bonds as designed. Then we focus on the bonding area. We inspect the pinch weld for contamination, bare metal, prior damage, and corrosion. If rust is present, we perform the appropriate rust prep and primer steps to help prevent leaks, wind noise, and premature bond failure. Once the surface is ready, we clean and prime the new glass per the urethane system requirements, lay a continuous urethane bead, and set the windshield with accurate alignment. After reinstalling moldings and exterior trim, we finish with cleanup and a quality check (fit/gap review and seal inspection). For most vehicles, Bang AutoGlass completes install + cleanup + verification in about 30–45 minutes on-site. Before you drive, we confirm safe drive-away time and address scheduling or insurance questions, backed by our lifetime workmanship warranty.
Safe Drive-Away Time (SDAT/MDAT): When You Can Drive After Land Rover Freelander Windshield Replacement
Safe Drive-Away Time (SDAT), also called Minimum Drive-Away Time (MDAT), is the minimum period your Land Rover Freelander must remain parked after windshield replacement so the urethane adhesive reaches safe working strength. This is a safety requirement: the windshield supports vehicle structural integrity and can affect passenger-side airbag performance. Driving too soon can disturb the fresh bond line before it has built enough strength. SDAT/MDAT is not one fixed number. It varies by adhesive product and job-site conditions—especially temperature and humidity. Colder or drier conditions typically slow curing, while moderate warmth and humidity help urethane gain strength faster. For Land Rover Freelander windshield replacement, Bang AutoGlass uses a clear baseline: a minimum 1 hour safe drive-away time after the adhesive is applied. If conditions are unfavorable, we recommend additional waiting time and explain the rationale on-site. While you wait, keep the vehicle stationary, close doors gently (avoid pressure spikes), and avoid jacking the vehicle. Once cleared to drive, take a smooth first trip and avoid potholes or aggressive maneuvers. Need scheduling help or an insurance claim? We work with all insurance companies when comprehensive coverage applies and back every job with a lifetime workmanship warranty.
Cure Time vs. Full Cure: When It’s Safe to Use Highways, Wash Your Car, and Remove Tape
Cure time and full cure aren’t the same for your Land Rover Freelander windshield replacement. Cure time is the Safe Drive-Away Time (SDAT/MDAT): when the urethane adhesive has enough strength for normal driving. Full cure happens later, after the adhesive finishes crosslinking and reaches its long-term bond strength and weather-tight seal. At Bang AutoGlass, we confirm SDAT on-site and require at least 1 hour before you drive your Land Rover Freelander. After SDAT, drive—but treat the first day as “gentle use.” Avoid rough roads, hard braking, and slamming doors; sudden cabin-pressure spikes can stress a fresh seal. If you can, crack a window slightly for the first few hours to reduce pressure. Highway driving is usually fine once cleared, but long trips create sustained wind load and body flex. When possible, postpone extended highway runs until later the same day or the next day, especially in cold or very dry weather. For aftercare, skip automated car washes and high-pressure spray for 24–48 hours. Light hand washing is safer after day one, but don’t aim water at the windshield edges. If we apply retention tape, leave it on for the recommended period (often until the next day) and remove it slowly. We’ll review these steps before finishing your mobile windshield replacement.
What Changes the Time Estimate: Adhesive Type, Temperature/Humidity, Rust Prep, and Glass/Sensor Complexity
Time estimates for a Land Rover Freelander windshield replacement vary because the plan is driven by adhesive chemistry, site conditions, and vehicle design—not just technician speed. The biggest factor is the urethane system. Different products have different working times and SDAT/MDAT ratings, and those ratings depend on temperature and humidity. Since urethane cures using ambient moisture, cold and dry weather typically slows cure speed, while warmer conditions with moderate humidity help the adhesive build strength faster. Next is pinch weld condition. If we find corrosion, damaged paint, bare metal, or contamination from a prior installation, we add time for correct cleaning, primer, and rust treatment. That prep is not optional; it’s the foundation for preventing leaks, wind noise, and premature bond failure. Vehicle trim can also add minutes. Some Land Rover Freelander cowls, clips, and molding systems require careful disassembly to avoid breakage or cosmetic damage. Features like heated or acoustic glass, HUD cutouts, rain/light sensors, and camera brackets require precise placement and clean mounting surfaces. If your Land Rover Freelander has ADAS, calibration may be required after replacement, adding time beyond the typical 30–45 minute on-site install. Bang AutoGlass keeps it simple with mobile service, next-day scheduling in many areas, insurance coordination, and a lifetime workmanship warranty.
Does ADAS Calibration Add Time for Land Rover Freelander? Scans, Calibration Type, and Verification Steps
For many modern Land Rover Freelander vehicles, windshield replacement is also an ADAS procedure because the glass can be the mounting surface and optical path for forward-facing cameras. If your Land Rover Freelander has lane departure warning, automatic emergency braking, adaptive cruise control, or traffic sign recognition, ADAS calibration may be required after the new windshield is installed—even when the camera bracket is transferred correctly. ADAS time is usually added in three steps: a pre-scan, the calibration step, and a post-scan verification. The pre-scan checks for diagnostic trouble codes (DTCs) and documents system status before work begins. Calibration can be static, dynamic, or both depending on Land Rover Freelander requirements. Static calibration uses targets, measured distances, controlled lighting, and precise alignment. Dynamic calibration is a guided drive so the camera can relearn lane markings and vehicle geometry. The post-scan confirms the system is communicating properly and within tolerance. Because requirements vary by Land Rover Freelander trim and equipment, added time can range from a short add-on to a longer window that depends on space, equipment, and driving conditions. Bang AutoGlass will identify calibration needs, explain the method, and build it into your plan. We often schedule next day, work with all insurance companies when comprehensive coverage applies, and back our workmanship for life.
Enjoy More Relevant Blogs
Windshield Repair vs. Replacement for Your Land Rover Freelander: When a Chip Can Be Fixed
Windshield repair vs replacement for your Land Rover Freelander: learn when a chip can be fixed, when cracks require replacement, and how to save time and money.
Land Rover Freelander Windshield Technology Guide: HUD, Rain Sensors, Heated/Acoustic Glass, and What It Means for Replacement
Land Rover Freelander windshield tech explained—HUD, rain sensors, heated and acoustic glass. Learn how features affect replacement parts, pricing, and calibration.
OEM vs. Aftermarket Glass for Land Rover Freelander Windshield Replacement: Pros, Cons, and Best Choice
OEM vs aftermarket glass for Land Rover Freelander windshield replacement: compare fit, clarity, and ADAS compatibility to pick the best value and safety for you.
Mobile Windshield Replacement for Land Rover Freelander: Same-Day Service, Timing, and What to Prepare
Mobile windshield replacement for Land Rover Freelander: same-day service tips, what to prep, where we can work, and expected install and cure timing on-site.
Land Rover Freelander Windshield Replacement Cost: What to Expect (and How to Save)
Land Rover Freelander windshield replacement cost: price drivers, OEM vs aftermarket options, ADAS calibration impacts, and practical ways to save on service.
Does Insurance Cover a Land Rover Freelander Windshield Replacement? Deductibles, Claims, and Tips
Does insurance cover a Land Rover Freelander windshield replacement? Understand deductibles, filing a claim, OEM vs aftermarket glass, and ways to save money.
ADAS Calibration After Land Rover Freelander Windshield Replacement: Why It’s a Critical Safety Step
After Land Rover Freelander windshield replacement, ADAS calibration helps keep lane assist and braking systems accurate. Learn when it is required and why now.
Windshield Replacement Warranty for Land Rover Freelander: What’s Covered (Leaks, Wind Noise) and How to Protect It
Windshield warranty for Land Rover Freelander: what covers leaks and wind noise, how to protect coverage, and when to request an inspection if issues appear.
Preventing Windshield Damage on a Land Rover Freelander: Road Debris, Weather, and Maintenance Tips
Prevent windshield damage on Land Rover Freelander with practical tips for road debris, weather changes, wiper care, and maintenance that reduces chips year-round.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm