Services
Service Areas
Cleanup After Quarter Window Breakage on Fiat 600e: Safe Glass Removal and Interior Protection
After a quarter window shatters on your Fiat 600e, it’s tempting to focus on replacement first, but the priority is making the cabin safe and stopping debris from spreading. Tempered quarter glass breaks into hard pellets that roll under seat rails and wedge into carpet backing. If you must drive, remove passengers and loose items, then suit up with gloves, eye protection, and closed-toe shoes. Pull the largest chunks from the opening and lower ledge and place them in a rigid box or thick bag. Next, vacuum in stages using a crevice tool—start at the headliner edge and trim seams, then seats and belt receivers, then the floor and cargo area. Avoid sweeping with a shop broom; it grinds fragments into fabric. For upholstery, press wide tape or a lint roller to collect glitter-like shards, and finish plastics with a damp microfiber that traps fines instead of moving them around. If weather is an issue, tape plastic sheeting from the inside with painter’s tape; avoid duct tape that can pull paint. When you schedule Bang AutoGlass for mobile quarter window replacement, we confirm fitment and perform a final interior glass sweep so your Fiat 600e returns to a comfortable, safe daily driver.
Verify the Correct Quarter Glass for Fiat 600e: Fixed vs Pop-Out, Tint Match, and DOT Markings
Before installing a new quarter window on your Fiat 600e, we verify exact fitment, because an “almost right” piece can cause leaks, wind noise, trim gaps, or a tint mismatch that’s obvious in daylight. First we confirm the quarter glass style: fixed glass bonded with urethane versus a pop-out/vent unit with hinges or latches. We match your Fiat 600e body style, model-year range, and left/right orientation. Next we align appearance and solar performance—clear versus factory privacy tint, shade consistency, and how any existing window film will blend so the replacement doesn’t stand out. We also check the glass “bug” markings: DOT codes, safety identifiers, manufacturer traceability, and the correct AS rating for non-windshield glazing. Many quarter windows arrive as an encapsulated assembly with pre-attached molding, studs, locator pins, or clips; those details control seating depth, reveal lines, and how interior panels lock back in. When applicable, we confirm embedded features such as antenna elements. The result is an OEM-correct Fiat 600e quarter window replacement that seals properly. If comprehensive insurance applies, Bang AutoGlass works with all insurance companies and can help you complete the claim steps on-site.
Remove Trim and Old Glass: Fiat 600e Quarter Window Replacement Disassembly Checklist
Quarter window replacement on a Fiat 600e depends on controlled access: remove only what’s necessary, protect painted edges, and keep clips intact so the car goes back together without rattles. We start by stabilizing the work area—powering down accessories, opening another door or window to reduce pressure changes, and masking adjacent paint, weatherstrips, and trim. From inside the vehicle, we move the minimum panels needed (often a rear seat bolster, quarter trim, and cargo-side panels), using non-marring tools and organizing hardware so every fastener returns to its original location. We work carefully around seatbelt anchors and curtain airbag zones to avoid damage and warning lights. Release method depends on the Fiat 600e design: bonded glass is separated by cutting the urethane bead cleanly without gouging the pinchweld or bending the flange; bolt-in or framed styles require supporting the glass as retainers are removed to prevent a sudden drop. After removal, we re-vacuum the cavity, address any damaged molding, and prep the opening for installation. Most mobile replacements take about 30–45 minutes for the swap, followed by adhesive cure time before safe drive-away.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
A durable quarter window replacement for your Fiat 600e is won in bond preparation. With bonded quarter glass, the pinchweld (metal flange) must be clean, stable, and compatible with the urethane system, or you risk water intrusion into the quarter cavity and corrosion spreading under paint. Bang AutoGlass begins with a corrosion and coating assessment, looking for bubbling paint, surface rust, exposed steel, and residue from prior repairs. Our goal is to preserve factory E-coat and sound paint while removing only compromised material. We then reduce old urethane to a thin, uniform base layer rather than grinding to bare metal, because fresh urethane bonds best to a properly prepared, consistent substrate. If rust cleanup or a cutting nick exposes bare metal, we treat the area with the correct refinish/body primer per manufacturer guidance and apply pinchweld primer when required by the adhesive system. On the glass side, we clean the bond band and use the appropriate activator or frit primer as specified to promote adhesion and UV protection at the bond line. Contamination control is non-negotiable: no silicone products, no household cleaners, no oily fingerprints, and no skipped flash times. We dry-fit the quarter glass to confirm reveal, seating depth, and trim engagement, then mask adjacent paint for clean edges and minimal cleanup. This prep helps your Fiat 600e perform like an OEM seal and reduces the chance of leaks and future corrosion.
Urethane Bonding and Minimum Drive-Away Time for Fiat 600e: SDAT Factors You Must Follow
Urethane bonding is the step that decides whether your Fiat 600e quarter window replacement stays quiet and watertight or develops leaks and wind noise. Bang AutoGlass uses automotive-grade urethane and applies a continuous, properly sized bead to maintain correct stand-off, seat depth, and support for surrounding moldings. Corners and transitions are treated carefully because thin spots can become leak paths. We set the quarter glass on its locators, align it to body lines, and confirm uniform contact around the perimeter without over-compressing the bead. The glass is then stabilized so it cannot shift while curing begins. Safe Drive-Away Time (SDAT) is mandatory and depends on the specific urethane system plus ambient temperature and relative humidity. Cooler, drier conditions typically slow cure, while warmer, more humid air generally accelerates it, which is why professional adhesive systems publish SDAT procedures and charts. As our baseline standard, we require at least one full hour before your Fiat 600e is considered safe to drive, even though the install often takes about 30–45 minutes. During early cure, avoid door slams, aggressive window operation, and rough roads that flex the body opening. For best results, postpone high-pressure washing for 24–48 hours and keep the bond line undisturbed. Need convenience? Our mobile auto glass service comes to you, and we work with all insurance companies when comprehensive coverage applies.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Fiat 600e
Before we return your Fiat 600e, we complete quality control to confirm the quarter window replacement looks right and seals right. We start with a full visual inspection inside and outside: the quarter glass should be centered, the reveal lines should match the opposite side, and molding or encapsulation must sit flush with no corner lifts, gaps, or uneven edges. We verify urethane contact and ensure trim can seat properly without stress. Next, we confirm interior trim fitment and clip engagement so you do not inherit future buzzes, rattles, or loose panels in the quarter or cargo area. Leak prevention is validated with a controlled water test: a steady hose stream along the perimeter while we observe the interior edge and quarter cavity for moisture. If wind noise is a concern, we check perimeter contact points and trim alignment, since small edge separations can whistle at speed. We then clean the glass, remove protective tape, and ensure surrounding paint and trim are left clean and free of residue. To close out, we document part verification, DOT markings, installation notes, and aftercare, including the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. Your paperwork reflects our lifetime workmanship warranty, and if you are filing a claim we can assist with any insurer when comprehensive coverage applies. The result is a Fiat 600e quarter window replacement that is verified, documented, and ready for normal use—often completed at your location by our mobile auto glass team.
Services
Service Areas
Cleanup After Quarter Window Breakage on Fiat 600e: Safe Glass Removal and Interior Protection
After a quarter window shatters on your Fiat 600e, it’s tempting to focus on replacement first, but the priority is making the cabin safe and stopping debris from spreading. Tempered quarter glass breaks into hard pellets that roll under seat rails and wedge into carpet backing. If you must drive, remove passengers and loose items, then suit up with gloves, eye protection, and closed-toe shoes. Pull the largest chunks from the opening and lower ledge and place them in a rigid box or thick bag. Next, vacuum in stages using a crevice tool—start at the headliner edge and trim seams, then seats and belt receivers, then the floor and cargo area. Avoid sweeping with a shop broom; it grinds fragments into fabric. For upholstery, press wide tape or a lint roller to collect glitter-like shards, and finish plastics with a damp microfiber that traps fines instead of moving them around. If weather is an issue, tape plastic sheeting from the inside with painter’s tape; avoid duct tape that can pull paint. When you schedule Bang AutoGlass for mobile quarter window replacement, we confirm fitment and perform a final interior glass sweep so your Fiat 600e returns to a comfortable, safe daily driver.
Verify the Correct Quarter Glass for Fiat 600e: Fixed vs Pop-Out, Tint Match, and DOT Markings
Before installing a new quarter window on your Fiat 600e, we verify exact fitment, because an “almost right” piece can cause leaks, wind noise, trim gaps, or a tint mismatch that’s obvious in daylight. First we confirm the quarter glass style: fixed glass bonded with urethane versus a pop-out/vent unit with hinges or latches. We match your Fiat 600e body style, model-year range, and left/right orientation. Next we align appearance and solar performance—clear versus factory privacy tint, shade consistency, and how any existing window film will blend so the replacement doesn’t stand out. We also check the glass “bug” markings: DOT codes, safety identifiers, manufacturer traceability, and the correct AS rating for non-windshield glazing. Many quarter windows arrive as an encapsulated assembly with pre-attached molding, studs, locator pins, or clips; those details control seating depth, reveal lines, and how interior panels lock back in. When applicable, we confirm embedded features such as antenna elements. The result is an OEM-correct Fiat 600e quarter window replacement that seals properly. If comprehensive insurance applies, Bang AutoGlass works with all insurance companies and can help you complete the claim steps on-site.
Remove Trim and Old Glass: Fiat 600e Quarter Window Replacement Disassembly Checklist
Quarter window replacement on a Fiat 600e depends on controlled access: remove only what’s necessary, protect painted edges, and keep clips intact so the car goes back together without rattles. We start by stabilizing the work area—powering down accessories, opening another door or window to reduce pressure changes, and masking adjacent paint, weatherstrips, and trim. From inside the vehicle, we move the minimum panels needed (often a rear seat bolster, quarter trim, and cargo-side panels), using non-marring tools and organizing hardware so every fastener returns to its original location. We work carefully around seatbelt anchors and curtain airbag zones to avoid damage and warning lights. Release method depends on the Fiat 600e design: bonded glass is separated by cutting the urethane bead cleanly without gouging the pinchweld or bending the flange; bolt-in or framed styles require supporting the glass as retainers are removed to prevent a sudden drop. After removal, we re-vacuum the cavity, address any damaged molding, and prep the opening for installation. Most mobile replacements take about 30–45 minutes for the swap, followed by adhesive cure time before safe drive-away.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
A durable quarter window replacement for your Fiat 600e is won in bond preparation. With bonded quarter glass, the pinchweld (metal flange) must be clean, stable, and compatible with the urethane system, or you risk water intrusion into the quarter cavity and corrosion spreading under paint. Bang AutoGlass begins with a corrosion and coating assessment, looking for bubbling paint, surface rust, exposed steel, and residue from prior repairs. Our goal is to preserve factory E-coat and sound paint while removing only compromised material. We then reduce old urethane to a thin, uniform base layer rather than grinding to bare metal, because fresh urethane bonds best to a properly prepared, consistent substrate. If rust cleanup or a cutting nick exposes bare metal, we treat the area with the correct refinish/body primer per manufacturer guidance and apply pinchweld primer when required by the adhesive system. On the glass side, we clean the bond band and use the appropriate activator or frit primer as specified to promote adhesion and UV protection at the bond line. Contamination control is non-negotiable: no silicone products, no household cleaners, no oily fingerprints, and no skipped flash times. We dry-fit the quarter glass to confirm reveal, seating depth, and trim engagement, then mask adjacent paint for clean edges and minimal cleanup. This prep helps your Fiat 600e perform like an OEM seal and reduces the chance of leaks and future corrosion.
Urethane Bonding and Minimum Drive-Away Time for Fiat 600e: SDAT Factors You Must Follow
Urethane bonding is the step that decides whether your Fiat 600e quarter window replacement stays quiet and watertight or develops leaks and wind noise. Bang AutoGlass uses automotive-grade urethane and applies a continuous, properly sized bead to maintain correct stand-off, seat depth, and support for surrounding moldings. Corners and transitions are treated carefully because thin spots can become leak paths. We set the quarter glass on its locators, align it to body lines, and confirm uniform contact around the perimeter without over-compressing the bead. The glass is then stabilized so it cannot shift while curing begins. Safe Drive-Away Time (SDAT) is mandatory and depends on the specific urethane system plus ambient temperature and relative humidity. Cooler, drier conditions typically slow cure, while warmer, more humid air generally accelerates it, which is why professional adhesive systems publish SDAT procedures and charts. As our baseline standard, we require at least one full hour before your Fiat 600e is considered safe to drive, even though the install often takes about 30–45 minutes. During early cure, avoid door slams, aggressive window operation, and rough roads that flex the body opening. For best results, postpone high-pressure washing for 24–48 hours and keep the bond line undisturbed. Need convenience? Our mobile auto glass service comes to you, and we work with all insurance companies when comprehensive coverage applies.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Fiat 600e
Before we return your Fiat 600e, we complete quality control to confirm the quarter window replacement looks right and seals right. We start with a full visual inspection inside and outside: the quarter glass should be centered, the reveal lines should match the opposite side, and molding or encapsulation must sit flush with no corner lifts, gaps, or uneven edges. We verify urethane contact and ensure trim can seat properly without stress. Next, we confirm interior trim fitment and clip engagement so you do not inherit future buzzes, rattles, or loose panels in the quarter or cargo area. Leak prevention is validated with a controlled water test: a steady hose stream along the perimeter while we observe the interior edge and quarter cavity for moisture. If wind noise is a concern, we check perimeter contact points and trim alignment, since small edge separations can whistle at speed. We then clean the glass, remove protective tape, and ensure surrounding paint and trim are left clean and free of residue. To close out, we document part verification, DOT markings, installation notes, and aftercare, including the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. Your paperwork reflects our lifetime workmanship warranty, and if you are filing a claim we can assist with any insurer when comprehensive coverage applies. The result is a Fiat 600e quarter window replacement that is verified, documented, and ready for normal use—often completed at your location by our mobile auto glass team.
Services
Service Areas
Cleanup After Quarter Window Breakage on Fiat 600e: Safe Glass Removal and Interior Protection
After a quarter window shatters on your Fiat 600e, it’s tempting to focus on replacement first, but the priority is making the cabin safe and stopping debris from spreading. Tempered quarter glass breaks into hard pellets that roll under seat rails and wedge into carpet backing. If you must drive, remove passengers and loose items, then suit up with gloves, eye protection, and closed-toe shoes. Pull the largest chunks from the opening and lower ledge and place them in a rigid box or thick bag. Next, vacuum in stages using a crevice tool—start at the headliner edge and trim seams, then seats and belt receivers, then the floor and cargo area. Avoid sweeping with a shop broom; it grinds fragments into fabric. For upholstery, press wide tape or a lint roller to collect glitter-like shards, and finish plastics with a damp microfiber that traps fines instead of moving them around. If weather is an issue, tape plastic sheeting from the inside with painter’s tape; avoid duct tape that can pull paint. When you schedule Bang AutoGlass for mobile quarter window replacement, we confirm fitment and perform a final interior glass sweep so your Fiat 600e returns to a comfortable, safe daily driver.
Verify the Correct Quarter Glass for Fiat 600e: Fixed vs Pop-Out, Tint Match, and DOT Markings
Before installing a new quarter window on your Fiat 600e, we verify exact fitment, because an “almost right” piece can cause leaks, wind noise, trim gaps, or a tint mismatch that’s obvious in daylight. First we confirm the quarter glass style: fixed glass bonded with urethane versus a pop-out/vent unit with hinges or latches. We match your Fiat 600e body style, model-year range, and left/right orientation. Next we align appearance and solar performance—clear versus factory privacy tint, shade consistency, and how any existing window film will blend so the replacement doesn’t stand out. We also check the glass “bug” markings: DOT codes, safety identifiers, manufacturer traceability, and the correct AS rating for non-windshield glazing. Many quarter windows arrive as an encapsulated assembly with pre-attached molding, studs, locator pins, or clips; those details control seating depth, reveal lines, and how interior panels lock back in. When applicable, we confirm embedded features such as antenna elements. The result is an OEM-correct Fiat 600e quarter window replacement that seals properly. If comprehensive insurance applies, Bang AutoGlass works with all insurance companies and can help you complete the claim steps on-site.
Remove Trim and Old Glass: Fiat 600e Quarter Window Replacement Disassembly Checklist
Quarter window replacement on a Fiat 600e depends on controlled access: remove only what’s necessary, protect painted edges, and keep clips intact so the car goes back together without rattles. We start by stabilizing the work area—powering down accessories, opening another door or window to reduce pressure changes, and masking adjacent paint, weatherstrips, and trim. From inside the vehicle, we move the minimum panels needed (often a rear seat bolster, quarter trim, and cargo-side panels), using non-marring tools and organizing hardware so every fastener returns to its original location. We work carefully around seatbelt anchors and curtain airbag zones to avoid damage and warning lights. Release method depends on the Fiat 600e design: bonded glass is separated by cutting the urethane bead cleanly without gouging the pinchweld or bending the flange; bolt-in or framed styles require supporting the glass as retainers are removed to prevent a sudden drop. After removal, we re-vacuum the cavity, address any damaged molding, and prep the opening for installation. Most mobile replacements take about 30–45 minutes for the swap, followed by adhesive cure time before safe drive-away.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
A durable quarter window replacement for your Fiat 600e is won in bond preparation. With bonded quarter glass, the pinchweld (metal flange) must be clean, stable, and compatible with the urethane system, or you risk water intrusion into the quarter cavity and corrosion spreading under paint. Bang AutoGlass begins with a corrosion and coating assessment, looking for bubbling paint, surface rust, exposed steel, and residue from prior repairs. Our goal is to preserve factory E-coat and sound paint while removing only compromised material. We then reduce old urethane to a thin, uniform base layer rather than grinding to bare metal, because fresh urethane bonds best to a properly prepared, consistent substrate. If rust cleanup or a cutting nick exposes bare metal, we treat the area with the correct refinish/body primer per manufacturer guidance and apply pinchweld primer when required by the adhesive system. On the glass side, we clean the bond band and use the appropriate activator or frit primer as specified to promote adhesion and UV protection at the bond line. Contamination control is non-negotiable: no silicone products, no household cleaners, no oily fingerprints, and no skipped flash times. We dry-fit the quarter glass to confirm reveal, seating depth, and trim engagement, then mask adjacent paint for clean edges and minimal cleanup. This prep helps your Fiat 600e perform like an OEM seal and reduces the chance of leaks and future corrosion.
Urethane Bonding and Minimum Drive-Away Time for Fiat 600e: SDAT Factors You Must Follow
Urethane bonding is the step that decides whether your Fiat 600e quarter window replacement stays quiet and watertight or develops leaks and wind noise. Bang AutoGlass uses automotive-grade urethane and applies a continuous, properly sized bead to maintain correct stand-off, seat depth, and support for surrounding moldings. Corners and transitions are treated carefully because thin spots can become leak paths. We set the quarter glass on its locators, align it to body lines, and confirm uniform contact around the perimeter without over-compressing the bead. The glass is then stabilized so it cannot shift while curing begins. Safe Drive-Away Time (SDAT) is mandatory and depends on the specific urethane system plus ambient temperature and relative humidity. Cooler, drier conditions typically slow cure, while warmer, more humid air generally accelerates it, which is why professional adhesive systems publish SDAT procedures and charts. As our baseline standard, we require at least one full hour before your Fiat 600e is considered safe to drive, even though the install often takes about 30–45 minutes. During early cure, avoid door slams, aggressive window operation, and rough roads that flex the body opening. For best results, postpone high-pressure washing for 24–48 hours and keep the bond line undisturbed. Need convenience? Our mobile auto glass service comes to you, and we work with all insurance companies when comprehensive coverage applies.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Fiat 600e
Before we return your Fiat 600e, we complete quality control to confirm the quarter window replacement looks right and seals right. We start with a full visual inspection inside and outside: the quarter glass should be centered, the reveal lines should match the opposite side, and molding or encapsulation must sit flush with no corner lifts, gaps, or uneven edges. We verify urethane contact and ensure trim can seat properly without stress. Next, we confirm interior trim fitment and clip engagement so you do not inherit future buzzes, rattles, or loose panels in the quarter or cargo area. Leak prevention is validated with a controlled water test: a steady hose stream along the perimeter while we observe the interior edge and quarter cavity for moisture. If wind noise is a concern, we check perimeter contact points and trim alignment, since small edge separations can whistle at speed. We then clean the glass, remove protective tape, and ensure surrounding paint and trim are left clean and free of residue. To close out, we document part verification, DOT markings, installation notes, and aftercare, including the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. Your paperwork reflects our lifetime workmanship warranty, and if you are filing a claim we can assist with any insurer when comprehensive coverage applies. The result is a Fiat 600e quarter window replacement that is verified, documented, and ready for normal use—often completed at your location by our mobile auto glass team.
Enjoy More Relevant Blogs
Tempered vs Laminated Door Glass on Dodge Ram 2500 Regular Cab: What’s Used and Why It Matters
Tempered vs laminated door glass on Dodge Ram 2500 Regular Cab: what your vehicle uses, how it breaks, and what it means for replacement safety, cost, and cleanup.
How to Schedule ADAS Calibration for Ford F250 Super Duty Crew Cab After Windshield Replacement
Schedule ADAS calibration for Ford F250 Super Duty Crew Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
After a Break-In: Dodge Challenger Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Dodge Challenger, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Will Insurance Cover Door Glass Replacement for a Ford Focus RS? Claims Steps, Deductibles, and What to Document
Will insurance cover Ford Focus RS door glass replacement? Learn claim steps, deductibles, photos to document, and how to schedule fast repairs today.
ADAS After Windshield Replacement on Gmc Terrain: Calibration Basics and Safety Checks
ADAS after Gmc Terrain windshield replacement: calibration basics, common safety checks, and how to confirm cameras and sensors are working correctly.
How to Schedule Mobile Rear Glass Replacement for Gmc Rally Wagon 2500
Schedule mobile rear glass replacement for your Gmc Rally Wagon 2500 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Stop Leaks and Wind Noise: What Proper Dodge Durango Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Dodge Durango quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Tempered Safety Rear Glass Replacement for Gmc Canyon Crew Cab: Understanding DOT Markings and FMVSS 205
Need Gmc Canyon Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Post-Install Checks for Gmc Sierra (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Gmc Sierra (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Fast Scheduling Guide: Gmc Sierra 3500 Hd Extended Cab Windshield Replacement From Booking to Install
Book Gmc Sierra 3500 Hd Extended Cab windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm