Services
Service Areas
After a Break-In: Fast Door Glass Replacement Checklist for Ford F450 Super Duty Crew Cab
Immediate Steps After a Break-In on Ford F450 Super Duty Crew Cab: Safety, Photos, and Report Basics
After a break-in on your Ford F450 Super Duty Crew Cab, focus on three priorities: safety, evidence, and a report number. Check for injuries, then move the vehicle to a safer, well-lit location if it is legal and safe. Avoid wiping the door, handle area, or lock cylinder until you have photos, since fingerprints and pry marks can matter. Take wide shots of the full Ford F450 Super Duty Crew Cab and the scene, then close-ups of the broken opening, glass fragments, upper window channel, weatherstripping, and any tool marks on trim. Write quick notes on the date, time, location, and what is missing, and request the police case number. Next, support your claim: gather your VIN and registration and ask your insurer whether comprehensive coverage applies to car door window replacement and what deductible applies. If keys, remotes, or sensitive documents were stolen, reset codes and replace paperwork immediately. To finish the checklist, schedule Ford F450 Super Duty Crew Cab door glass replacement promptly so the vehicle is secure and weather-tight. Bang AutoGlass provides mobile auto glass replacement at your home or work, often next day. Most installs take 30–45 minutes, followed by about one hour before driving, and our lifetime workmanship warranty backs every job.
Temporary Weather Protection: How to Cover the Ford F450 Super Duty Crew Cab Door Opening Until Service
Until your appointment, a temporary car window cover helps keep rain, debris, and wind out of your Ford F450 Super Duty Crew Cab and discourages a second theft. Wear gloves, remove loose shards from the window ledge, and dry the upper door frame and rubber run channel so tape can stick. Use clear plastic sheeting, window repair film, plastic wrap, or a heavy-duty trash bag, cut several inches larger than the opening for overlap. For the cleanest seal, lay the plastic on the outside so water sheds smoothly, then tape from the inside where adhesive can grab interior metal or the rubber channel instead of painted panels. Seal the top edge first, then the sides, and finish at the bottom while keeping the material stretched tight to reduce flapping and wind noise. Use painter's tape anywhere near paint, and use stronger tape only on the plastic itself. Keep the cover clear of door handles, mirrors, and side-airbag zones. If you must drive, keep speeds moderate and avoid car washes and heavy rain. This is not a repair, so book mobile Ford F450 Super Duty Crew Cab door glass replacement or side window replacement quickly. Bang AutoGlass can come to your home or work, often next day, with a 30–45 minute install backed by our lifetime workmanship warranty.
Fast Cleanup Checklist: Removing Glass Safely and Protecting Seats, Tracks, and Drains
Broken door glass cleanup is the step most likely to cause cuts, so slow down and use a broken car window cleanup checklist in your Ford F450 Super Duty Crew Cab. Tempered side glass breaks into thousands of small cubes that hide in seat seams, carpet, and door tracks. Wear thick gloves, eye protection, and closed-toe shoes. Remove the largest chunks first and place them in a rigid box or bucket so sharp edges do not tear a bag. Vacuum methodically with a shop vac or strong handheld unit and a crevice tool—seats, seams, floor mats, carpet edges, console gaps, and under the seats—then repeat from a different direction. For fragments that remain, press wide packing tape, a lint roller, or sticky putty onto fabric, and wipe hard surfaces with a damp microfiber cloth, folding often. Pay attention to the door itself: glass drops into the lower door cavity, run channel, and around drain holes where it can rattle or block drainage. If the window switch causes crunching or resistance, stop to protect the window regulator. After cleanup, book Ford F450 Super Duty Crew Cab door glass replacement; Bang AutoGlass mobile technicians can remove remaining debris during service and confirm proper sealing and smooth operation.
Verify the Correct Door Glass for Ford F450 Super Duty Crew Cab: Tint Match and DOT Safety Markings
To prevent repeat problems after a break-in, verify the correct door glass for your Ford F450 Super Duty Crew Cab before installation begins. Side windows are not interchangeable: year, trim, and body configuration can change the edge contour, mounting points, and run-channel engagement. Even bracket or molding differences can create a poor seal, whistling at speed, or a window that rocks and catches. Share your VIN and confirm the exact door position (front/rear and left/right) so the replacement matches your Ford F450 Super Duty Crew Cab. Choose OEM glass or a high-quality aftermarket equivalent, and confirm it is tempered safety glass approved for side-window use. Tint is the other common mismatch. Many vehicles have different factory tint levels by door, and if your Ford F450 Super Duty Crew Cab has aftermarket tint film, plan to re-tint the new pane for a uniform look. Finally, inspect the glazing stamp on the replacement: look for DOT identification and an AS rating (commonly AS2) that indicate certified automotive glazing and traceability. Checking these details upfront reduces delays and helps ensure the new window fits, seals, and looks right. Bang AutoGlass handles fitment validation, tint coordination, and safety-marking checks during mobile Ford F450 Super Duty Crew Cab door glass replacement, with service as soon as next day and a lifetime workmanship warranty.
Check the Window Regulator and Hardware: Prevent Repeat Failure on Ford F450 Super Duty Crew Cab
A break-in on your Ford F450 Super Duty Crew Cab can damage more than the glass. The impact and the pile of tempered fragments inside the door can jam or stress the power window regulator, cables, pulleys, and the clips that hold the glass. Before installing new door glass, watch for classic regulator symptoms: slow movement, uneven travel, the window tilting as it rises, clicking or grinding noises, or the glass dropping into the door. If you notice any of these, stop using the switch-repeated cycles can turn debris in the track into a full regulator failure. When the door panel is accessible, confirm the run channels are straight, the belt molding and weatherstrip are seated, and the carriers or mounting points aren't cracked or loose. Also look for hidden break-in damage: bent inner door skin, distorted guide rails, missing fasteners, or debris packed into the track that can make the new window bind, rattle, or leak. The most reliable approach is to replace the glass and inspect the track and regulator as one job. Bang AutoGlass can replace your Ford F450 Super Duty Crew Cab door glass on-site, clear the track, verify stable hardware, and test smooth operation-and we'll flag regulator issues immediately so you can fix the root cause.
Post-Replacement Security and QC: Smooth Operation, Water-Leak Checks, Wind Noise, and Rattle Tests
After your Ford F450 Super Duty Crew Cab door glass replacement, run a quick post-install checklist to confirm smooth operation, weather sealing, and security. First, cycle the window fully down and up several times. The glass should stay centered in the run channel, move at a consistent speed, and seat evenly into the top seal with no visible gaps. Listen for scraping, clicking, or rattling-those sounds can mean leftover debris, a loose clip, or a regulator problem. Next, do a light leak test: once the interior is dry, spray water around the perimeter and mirror-sail area, then check the door panel edge and carpet for moisture. On your next drive, pay attention to wind noise at highway speeds and any rattle over bumps; whistling often signals alignment or weatherstrip issues. Recheck security items, too: locks, alarm behavior, and interior handle function, and remove any temporary plastic or tape used after the break-in. If retention tape or adhesives were used, allow about one hour of safe drive-away time after installation. Most door glass replacements take about 30-45 minutes. Bang AutoGlass completes these checks on-site, offers mobile service as soon as next day, accepts all insurance carriers with comprehensive coverage, and backs the work with our lifetime workmanship warranty.
Services
Service Areas
After a Break-In: Fast Door Glass Replacement Checklist for Ford F450 Super Duty Crew Cab
Immediate Steps After a Break-In on Ford F450 Super Duty Crew Cab: Safety, Photos, and Report Basics
After a break-in on your Ford F450 Super Duty Crew Cab, focus on three priorities: safety, evidence, and a report number. Check for injuries, then move the vehicle to a safer, well-lit location if it is legal and safe. Avoid wiping the door, handle area, or lock cylinder until you have photos, since fingerprints and pry marks can matter. Take wide shots of the full Ford F450 Super Duty Crew Cab and the scene, then close-ups of the broken opening, glass fragments, upper window channel, weatherstripping, and any tool marks on trim. Write quick notes on the date, time, location, and what is missing, and request the police case number. Next, support your claim: gather your VIN and registration and ask your insurer whether comprehensive coverage applies to car door window replacement and what deductible applies. If keys, remotes, or sensitive documents were stolen, reset codes and replace paperwork immediately. To finish the checklist, schedule Ford F450 Super Duty Crew Cab door glass replacement promptly so the vehicle is secure and weather-tight. Bang AutoGlass provides mobile auto glass replacement at your home or work, often next day. Most installs take 30–45 minutes, followed by about one hour before driving, and our lifetime workmanship warranty backs every job.
Temporary Weather Protection: How to Cover the Ford F450 Super Duty Crew Cab Door Opening Until Service
Until your appointment, a temporary car window cover helps keep rain, debris, and wind out of your Ford F450 Super Duty Crew Cab and discourages a second theft. Wear gloves, remove loose shards from the window ledge, and dry the upper door frame and rubber run channel so tape can stick. Use clear plastic sheeting, window repair film, plastic wrap, or a heavy-duty trash bag, cut several inches larger than the opening for overlap. For the cleanest seal, lay the plastic on the outside so water sheds smoothly, then tape from the inside where adhesive can grab interior metal or the rubber channel instead of painted panels. Seal the top edge first, then the sides, and finish at the bottom while keeping the material stretched tight to reduce flapping and wind noise. Use painter's tape anywhere near paint, and use stronger tape only on the plastic itself. Keep the cover clear of door handles, mirrors, and side-airbag zones. If you must drive, keep speeds moderate and avoid car washes and heavy rain. This is not a repair, so book mobile Ford F450 Super Duty Crew Cab door glass replacement or side window replacement quickly. Bang AutoGlass can come to your home or work, often next day, with a 30–45 minute install backed by our lifetime workmanship warranty.
Fast Cleanup Checklist: Removing Glass Safely and Protecting Seats, Tracks, and Drains
Broken door glass cleanup is the step most likely to cause cuts, so slow down and use a broken car window cleanup checklist in your Ford F450 Super Duty Crew Cab. Tempered side glass breaks into thousands of small cubes that hide in seat seams, carpet, and door tracks. Wear thick gloves, eye protection, and closed-toe shoes. Remove the largest chunks first and place them in a rigid box or bucket so sharp edges do not tear a bag. Vacuum methodically with a shop vac or strong handheld unit and a crevice tool—seats, seams, floor mats, carpet edges, console gaps, and under the seats—then repeat from a different direction. For fragments that remain, press wide packing tape, a lint roller, or sticky putty onto fabric, and wipe hard surfaces with a damp microfiber cloth, folding often. Pay attention to the door itself: glass drops into the lower door cavity, run channel, and around drain holes where it can rattle or block drainage. If the window switch causes crunching or resistance, stop to protect the window regulator. After cleanup, book Ford F450 Super Duty Crew Cab door glass replacement; Bang AutoGlass mobile technicians can remove remaining debris during service and confirm proper sealing and smooth operation.
Verify the Correct Door Glass for Ford F450 Super Duty Crew Cab: Tint Match and DOT Safety Markings
To prevent repeat problems after a break-in, verify the correct door glass for your Ford F450 Super Duty Crew Cab before installation begins. Side windows are not interchangeable: year, trim, and body configuration can change the edge contour, mounting points, and run-channel engagement. Even bracket or molding differences can create a poor seal, whistling at speed, or a window that rocks and catches. Share your VIN and confirm the exact door position (front/rear and left/right) so the replacement matches your Ford F450 Super Duty Crew Cab. Choose OEM glass or a high-quality aftermarket equivalent, and confirm it is tempered safety glass approved for side-window use. Tint is the other common mismatch. Many vehicles have different factory tint levels by door, and if your Ford F450 Super Duty Crew Cab has aftermarket tint film, plan to re-tint the new pane for a uniform look. Finally, inspect the glazing stamp on the replacement: look for DOT identification and an AS rating (commonly AS2) that indicate certified automotive glazing and traceability. Checking these details upfront reduces delays and helps ensure the new window fits, seals, and looks right. Bang AutoGlass handles fitment validation, tint coordination, and safety-marking checks during mobile Ford F450 Super Duty Crew Cab door glass replacement, with service as soon as next day and a lifetime workmanship warranty.
Check the Window Regulator and Hardware: Prevent Repeat Failure on Ford F450 Super Duty Crew Cab
A break-in on your Ford F450 Super Duty Crew Cab can damage more than the glass. The impact and the pile of tempered fragments inside the door can jam or stress the power window regulator, cables, pulleys, and the clips that hold the glass. Before installing new door glass, watch for classic regulator symptoms: slow movement, uneven travel, the window tilting as it rises, clicking or grinding noises, or the glass dropping into the door. If you notice any of these, stop using the switch-repeated cycles can turn debris in the track into a full regulator failure. When the door panel is accessible, confirm the run channels are straight, the belt molding and weatherstrip are seated, and the carriers or mounting points aren't cracked or loose. Also look for hidden break-in damage: bent inner door skin, distorted guide rails, missing fasteners, or debris packed into the track that can make the new window bind, rattle, or leak. The most reliable approach is to replace the glass and inspect the track and regulator as one job. Bang AutoGlass can replace your Ford F450 Super Duty Crew Cab door glass on-site, clear the track, verify stable hardware, and test smooth operation-and we'll flag regulator issues immediately so you can fix the root cause.
Post-Replacement Security and QC: Smooth Operation, Water-Leak Checks, Wind Noise, and Rattle Tests
After your Ford F450 Super Duty Crew Cab door glass replacement, run a quick post-install checklist to confirm smooth operation, weather sealing, and security. First, cycle the window fully down and up several times. The glass should stay centered in the run channel, move at a consistent speed, and seat evenly into the top seal with no visible gaps. Listen for scraping, clicking, or rattling-those sounds can mean leftover debris, a loose clip, or a regulator problem. Next, do a light leak test: once the interior is dry, spray water around the perimeter and mirror-sail area, then check the door panel edge and carpet for moisture. On your next drive, pay attention to wind noise at highway speeds and any rattle over bumps; whistling often signals alignment or weatherstrip issues. Recheck security items, too: locks, alarm behavior, and interior handle function, and remove any temporary plastic or tape used after the break-in. If retention tape or adhesives were used, allow about one hour of safe drive-away time after installation. Most door glass replacements take about 30-45 minutes. Bang AutoGlass completes these checks on-site, offers mobile service as soon as next day, accepts all insurance carriers with comprehensive coverage, and backs the work with our lifetime workmanship warranty.
Services
Service Areas
After a Break-In: Fast Door Glass Replacement Checklist for Ford F450 Super Duty Crew Cab
Immediate Steps After a Break-In on Ford F450 Super Duty Crew Cab: Safety, Photos, and Report Basics
After a break-in on your Ford F450 Super Duty Crew Cab, focus on three priorities: safety, evidence, and a report number. Check for injuries, then move the vehicle to a safer, well-lit location if it is legal and safe. Avoid wiping the door, handle area, or lock cylinder until you have photos, since fingerprints and pry marks can matter. Take wide shots of the full Ford F450 Super Duty Crew Cab and the scene, then close-ups of the broken opening, glass fragments, upper window channel, weatherstripping, and any tool marks on trim. Write quick notes on the date, time, location, and what is missing, and request the police case number. Next, support your claim: gather your VIN and registration and ask your insurer whether comprehensive coverage applies to car door window replacement and what deductible applies. If keys, remotes, or sensitive documents were stolen, reset codes and replace paperwork immediately. To finish the checklist, schedule Ford F450 Super Duty Crew Cab door glass replacement promptly so the vehicle is secure and weather-tight. Bang AutoGlass provides mobile auto glass replacement at your home or work, often next day. Most installs take 30–45 minutes, followed by about one hour before driving, and our lifetime workmanship warranty backs every job.
Temporary Weather Protection: How to Cover the Ford F450 Super Duty Crew Cab Door Opening Until Service
Until your appointment, a temporary car window cover helps keep rain, debris, and wind out of your Ford F450 Super Duty Crew Cab and discourages a second theft. Wear gloves, remove loose shards from the window ledge, and dry the upper door frame and rubber run channel so tape can stick. Use clear plastic sheeting, window repair film, plastic wrap, or a heavy-duty trash bag, cut several inches larger than the opening for overlap. For the cleanest seal, lay the plastic on the outside so water sheds smoothly, then tape from the inside where adhesive can grab interior metal or the rubber channel instead of painted panels. Seal the top edge first, then the sides, and finish at the bottom while keeping the material stretched tight to reduce flapping and wind noise. Use painter's tape anywhere near paint, and use stronger tape only on the plastic itself. Keep the cover clear of door handles, mirrors, and side-airbag zones. If you must drive, keep speeds moderate and avoid car washes and heavy rain. This is not a repair, so book mobile Ford F450 Super Duty Crew Cab door glass replacement or side window replacement quickly. Bang AutoGlass can come to your home or work, often next day, with a 30–45 minute install backed by our lifetime workmanship warranty.
Fast Cleanup Checklist: Removing Glass Safely and Protecting Seats, Tracks, and Drains
Broken door glass cleanup is the step most likely to cause cuts, so slow down and use a broken car window cleanup checklist in your Ford F450 Super Duty Crew Cab. Tempered side glass breaks into thousands of small cubes that hide in seat seams, carpet, and door tracks. Wear thick gloves, eye protection, and closed-toe shoes. Remove the largest chunks first and place them in a rigid box or bucket so sharp edges do not tear a bag. Vacuum methodically with a shop vac or strong handheld unit and a crevice tool—seats, seams, floor mats, carpet edges, console gaps, and under the seats—then repeat from a different direction. For fragments that remain, press wide packing tape, a lint roller, or sticky putty onto fabric, and wipe hard surfaces with a damp microfiber cloth, folding often. Pay attention to the door itself: glass drops into the lower door cavity, run channel, and around drain holes where it can rattle or block drainage. If the window switch causes crunching or resistance, stop to protect the window regulator. After cleanup, book Ford F450 Super Duty Crew Cab door glass replacement; Bang AutoGlass mobile technicians can remove remaining debris during service and confirm proper sealing and smooth operation.
Verify the Correct Door Glass for Ford F450 Super Duty Crew Cab: Tint Match and DOT Safety Markings
To prevent repeat problems after a break-in, verify the correct door glass for your Ford F450 Super Duty Crew Cab before installation begins. Side windows are not interchangeable: year, trim, and body configuration can change the edge contour, mounting points, and run-channel engagement. Even bracket or molding differences can create a poor seal, whistling at speed, or a window that rocks and catches. Share your VIN and confirm the exact door position (front/rear and left/right) so the replacement matches your Ford F450 Super Duty Crew Cab. Choose OEM glass or a high-quality aftermarket equivalent, and confirm it is tempered safety glass approved for side-window use. Tint is the other common mismatch. Many vehicles have different factory tint levels by door, and if your Ford F450 Super Duty Crew Cab has aftermarket tint film, plan to re-tint the new pane for a uniform look. Finally, inspect the glazing stamp on the replacement: look for DOT identification and an AS rating (commonly AS2) that indicate certified automotive glazing and traceability. Checking these details upfront reduces delays and helps ensure the new window fits, seals, and looks right. Bang AutoGlass handles fitment validation, tint coordination, and safety-marking checks during mobile Ford F450 Super Duty Crew Cab door glass replacement, with service as soon as next day and a lifetime workmanship warranty.
Check the Window Regulator and Hardware: Prevent Repeat Failure on Ford F450 Super Duty Crew Cab
A break-in on your Ford F450 Super Duty Crew Cab can damage more than the glass. The impact and the pile of tempered fragments inside the door can jam or stress the power window regulator, cables, pulleys, and the clips that hold the glass. Before installing new door glass, watch for classic regulator symptoms: slow movement, uneven travel, the window tilting as it rises, clicking or grinding noises, or the glass dropping into the door. If you notice any of these, stop using the switch-repeated cycles can turn debris in the track into a full regulator failure. When the door panel is accessible, confirm the run channels are straight, the belt molding and weatherstrip are seated, and the carriers or mounting points aren't cracked or loose. Also look for hidden break-in damage: bent inner door skin, distorted guide rails, missing fasteners, or debris packed into the track that can make the new window bind, rattle, or leak. The most reliable approach is to replace the glass and inspect the track and regulator as one job. Bang AutoGlass can replace your Ford F450 Super Duty Crew Cab door glass on-site, clear the track, verify stable hardware, and test smooth operation-and we'll flag regulator issues immediately so you can fix the root cause.
Post-Replacement Security and QC: Smooth Operation, Water-Leak Checks, Wind Noise, and Rattle Tests
After your Ford F450 Super Duty Crew Cab door glass replacement, run a quick post-install checklist to confirm smooth operation, weather sealing, and security. First, cycle the window fully down and up several times. The glass should stay centered in the run channel, move at a consistent speed, and seat evenly into the top seal with no visible gaps. Listen for scraping, clicking, or rattling-those sounds can mean leftover debris, a loose clip, or a regulator problem. Next, do a light leak test: once the interior is dry, spray water around the perimeter and mirror-sail area, then check the door panel edge and carpet for moisture. On your next drive, pay attention to wind noise at highway speeds and any rattle over bumps; whistling often signals alignment or weatherstrip issues. Recheck security items, too: locks, alarm behavior, and interior handle function, and remove any temporary plastic or tape used after the break-in. If retention tape or adhesives were used, allow about one hour of safe drive-away time after installation. Most door glass replacements take about 30-45 minutes. Bang AutoGlass completes these checks on-site, offers mobile service as soon as next day, accepts all insurance carriers with comprehensive coverage, and backs the work with our lifetime workmanship warranty.
Enjoy More Relevant Blogs
Tempered vs Laminated Door Glass on Dodge Ram 2500 Regular Cab: What’s Used and Why It Matters
Tempered vs laminated door glass on Dodge Ram 2500 Regular Cab: what your vehicle uses, how it breaks, and what it means for replacement safety, cost, and cleanup.
How to Schedule ADAS Calibration for Ford F250 Super Duty Crew Cab After Windshield Replacement
Schedule ADAS calibration for Ford F250 Super Duty Crew Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
After a Break-In: Dodge Challenger Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Dodge Challenger, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Will Insurance Cover Door Glass Replacement for a Ford Focus RS? Claims Steps, Deductibles, and What to Document
Will insurance cover Ford Focus RS door glass replacement? Learn claim steps, deductibles, photos to document, and how to schedule fast repairs today.
ADAS After Windshield Replacement on Gmc Terrain: Calibration Basics and Safety Checks
ADAS after Gmc Terrain windshield replacement: calibration basics, common safety checks, and how to confirm cameras and sensors are working correctly.
How to Schedule Mobile Rear Glass Replacement for Gmc Rally Wagon 2500
Schedule mobile rear glass replacement for your Gmc Rally Wagon 2500 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Stop Leaks and Wind Noise: What Proper Dodge Durango Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Dodge Durango quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Tempered Safety Rear Glass Replacement for Gmc Canyon Crew Cab: Understanding DOT Markings and FMVSS 205
Need Gmc Canyon Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Post-Install Checks for Gmc Sierra (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Gmc Sierra (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Fast Scheduling Guide: Gmc Sierra 3500 Hd Extended Cab Windshield Replacement From Booking to Install
Book Gmc Sierra 3500 Hd Extended Cab windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm