Services
Service Areas
How Long Does Rear Glass Replacement Take on Ford Ranger Raptor? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Ford Ranger Raptor Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
A Ford Ranger Raptor rear glass replacement often seems to take longer than expected because the clock includes more than the swap itself. Even if a traditional shop can replace the back glass in 1–3 hours of labor, the overall timeline can grow due to part availability, paperwork, drop-off logistics, and the time required after installation before the vehicle should be driven. Technicians remove the damaged rear windshield/back glass, vacuum and clear fragments, prep the bonding surface, and then set the new rear window in fresh urethane with precise alignment so the seal is even. Bang AutoGlass makes the process easier by bringing mobile auto glass service to you. For most Ford Ranger Raptor rear window replacements, the hands-on work typically takes about 30–45 minutes. We then ask you to keep the vehicle parked for at least 1 hour so the urethane reaches a conservative safe drive-away baseline. Many customers schedule the service like an extended meeting, not an all-day errand. If you’re using insurance, rear glass replacement is usually processed under comprehensive coverage, and we can work with any carrier that provides it. Our lifetime workmanship warranty backs the installation for long-term peace of mind.
Ford Ranger Raptor Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
The install time for a Ford Ranger Raptor rear window replacement depends on completing each step efficiently without cutting corners. We start by protecting interior surfaces, removing trim and moldings, and disconnecting anything tied to the back glass, such as defroster tabs or an integrated antenna lead. If the rear window shattered, loose fragments are removed and the parcel shelf, cargo area, and vents are vacuumed so glass chips don’t linger. Next is surface preparation on the pinch weld: old urethane is cut back, the area is cleaned and decontaminated, and any rust is addressed so the new adhesive bonds consistently. Depending on the adhesive system, primer or activator is applied to promote adhesion and help prevent corrosion. Fresh automotive urethane is then laid in a continuous bead, and the new rear windshield/back glass is set with precise alignment so the perimeter seats evenly and the hatch or trunk closes correctly. We finish by reinstalling moldings, verifying defroster connector alignment, applying retention tape if needed, and performing a quick inspection to catch gaps that can lead to wind noise or leaks. At Bang AutoGlass, this workflow typically takes about 30–45 minutes of hands-on work for most Ford Ranger Raptor back glass replacements, followed by the required stationary set time before driving.
Urethane Cure Time for Ford Ranger Raptor Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Ford Ranger Raptor back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Ford Ranger Raptor rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Ford Ranger Raptor Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Rear glass replacement cure time on a Ford Ranger Raptor depends on how fast the urethane adhesive can reach Minimum/Safe Drive-Away Time (MDAT/SDAT). Those times vary by adhesive formula and by conditions during service—especially ambient temperature and relative humidity. In colder weather, moisture-cure polyurethane typically reacts more slowly, so the bond takes longer to build early strength. Very dry air can also slow curing because many urethanes rely on moisture in the air. Heat usually speeds cure, but extreme heat can shorten open/working time, giving the technician less time to seat the Ford Ranger Raptor back glass before the bead skins over. Adhesive choice matters: fast-cure and advanced-cure urethanes are designed to hit MDAT sooner within specific ranges, and specialized systems may be selected for very low temperatures. Vehicle design plays a role too. Larger rear windshields/back glass on SUVs and hatchbacks have longer bead paths and more leverage, so correct bead height, proper primers, and clean pinch-weld prep are critical for a consistent seal. Bang AutoGlass plans materials and process around real on-site conditions for your Ford Ranger Raptor, then provides a clear drive-away recommendation you can follow.
When Is It Safe to Drive After Ford Ranger Raptor Rear Glass Replacement? Practical Drive-Away Rules
The safest answer to “when can I drive?” after a Ford Ranger Raptor rear window replacement is: when the urethane has reached MDAT/SDAT for the product and conditions used. MDAT (Minimum Drive-Away Time) and SDAT (Safe Drive-Away Time) describe the minimum stationary window needed for the bond to handle normal driving forces. Because cure speed changes with temperature, humidity, and adhesive formula, timing should come from the urethane manufacturer’s specifications—not a generic estimate. Fast-cure urethanes may allow earlier drive-away in ideal ranges, but cold or very dry weather often extends the time needed to hit the same safety threshold; extreme heat can also alter working time. Practical rule: protect the install during its most vulnerable period. Bang AutoGlass requires at least 1 hour with your Ford Ranger Raptor parked after the back glass is set before driving—no moving it around and no short trips. After you start driving, keep it gentle the rest of the day: avoid rough roads, don’t slam doors or the liftgate, and postpone high-speed driving while the bond continues to mature. If insurance applies, rear glass replacement is typically a comprehensive claim, and our lifetime workmanship warranty supports the install long after service.
Ford Ranger Raptor Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
The best aftercare for a Ford Ranger Raptor rear window replacement is to minimize stress on the glass while the urethane finishes curing. Begin by following the drive-away time provided; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is present, leave it in place—tape helps stabilize the rear windshield/back glass and keep moldings seated as the adhesive sets. Many jobs do well with roughly 24 hours of tape, and up to 48 hours in some situations. For the first 1–2 days, skip automated car washes, power washers, and anything that directs pressurized water at the window edge. Also avoid abrupt cabin-pressure changes: close doors softly, don’t slam the liftgate, and avoid blasting HVAC at the glass perimeter. If you can, steer clear of uneven construction roads on day one, since body twist and vibration can load the new glass before the bond is fully mature. After your first drive or first rain, do a quick inspection for dampness, wind noise, or moisture around trim and the cargo area, and report concerns promptly. Protect the rear defroster grid by cleaning with a soft cloth and mild, non-abrasive cleaner—no scraping or harsh chemicals.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Ford Ranger Raptor? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Ford Ranger Raptor Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
A Ford Ranger Raptor rear glass replacement often seems to take longer than expected because the clock includes more than the swap itself. Even if a traditional shop can replace the back glass in 1–3 hours of labor, the overall timeline can grow due to part availability, paperwork, drop-off logistics, and the time required after installation before the vehicle should be driven. Technicians remove the damaged rear windshield/back glass, vacuum and clear fragments, prep the bonding surface, and then set the new rear window in fresh urethane with precise alignment so the seal is even. Bang AutoGlass makes the process easier by bringing mobile auto glass service to you. For most Ford Ranger Raptor rear window replacements, the hands-on work typically takes about 30–45 minutes. We then ask you to keep the vehicle parked for at least 1 hour so the urethane reaches a conservative safe drive-away baseline. Many customers schedule the service like an extended meeting, not an all-day errand. If you’re using insurance, rear glass replacement is usually processed under comprehensive coverage, and we can work with any carrier that provides it. Our lifetime workmanship warranty backs the installation for long-term peace of mind.
Ford Ranger Raptor Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
The install time for a Ford Ranger Raptor rear window replacement depends on completing each step efficiently without cutting corners. We start by protecting interior surfaces, removing trim and moldings, and disconnecting anything tied to the back glass, such as defroster tabs or an integrated antenna lead. If the rear window shattered, loose fragments are removed and the parcel shelf, cargo area, and vents are vacuumed so glass chips don’t linger. Next is surface preparation on the pinch weld: old urethane is cut back, the area is cleaned and decontaminated, and any rust is addressed so the new adhesive bonds consistently. Depending on the adhesive system, primer or activator is applied to promote adhesion and help prevent corrosion. Fresh automotive urethane is then laid in a continuous bead, and the new rear windshield/back glass is set with precise alignment so the perimeter seats evenly and the hatch or trunk closes correctly. We finish by reinstalling moldings, verifying defroster connector alignment, applying retention tape if needed, and performing a quick inspection to catch gaps that can lead to wind noise or leaks. At Bang AutoGlass, this workflow typically takes about 30–45 minutes of hands-on work for most Ford Ranger Raptor back glass replacements, followed by the required stationary set time before driving.
Urethane Cure Time for Ford Ranger Raptor Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Ford Ranger Raptor back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Ford Ranger Raptor rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Ford Ranger Raptor Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Rear glass replacement cure time on a Ford Ranger Raptor depends on how fast the urethane adhesive can reach Minimum/Safe Drive-Away Time (MDAT/SDAT). Those times vary by adhesive formula and by conditions during service—especially ambient temperature and relative humidity. In colder weather, moisture-cure polyurethane typically reacts more slowly, so the bond takes longer to build early strength. Very dry air can also slow curing because many urethanes rely on moisture in the air. Heat usually speeds cure, but extreme heat can shorten open/working time, giving the technician less time to seat the Ford Ranger Raptor back glass before the bead skins over. Adhesive choice matters: fast-cure and advanced-cure urethanes are designed to hit MDAT sooner within specific ranges, and specialized systems may be selected for very low temperatures. Vehicle design plays a role too. Larger rear windshields/back glass on SUVs and hatchbacks have longer bead paths and more leverage, so correct bead height, proper primers, and clean pinch-weld prep are critical for a consistent seal. Bang AutoGlass plans materials and process around real on-site conditions for your Ford Ranger Raptor, then provides a clear drive-away recommendation you can follow.
When Is It Safe to Drive After Ford Ranger Raptor Rear Glass Replacement? Practical Drive-Away Rules
The safest answer to “when can I drive?” after a Ford Ranger Raptor rear window replacement is: when the urethane has reached MDAT/SDAT for the product and conditions used. MDAT (Minimum Drive-Away Time) and SDAT (Safe Drive-Away Time) describe the minimum stationary window needed for the bond to handle normal driving forces. Because cure speed changes with temperature, humidity, and adhesive formula, timing should come from the urethane manufacturer’s specifications—not a generic estimate. Fast-cure urethanes may allow earlier drive-away in ideal ranges, but cold or very dry weather often extends the time needed to hit the same safety threshold; extreme heat can also alter working time. Practical rule: protect the install during its most vulnerable period. Bang AutoGlass requires at least 1 hour with your Ford Ranger Raptor parked after the back glass is set before driving—no moving it around and no short trips. After you start driving, keep it gentle the rest of the day: avoid rough roads, don’t slam doors or the liftgate, and postpone high-speed driving while the bond continues to mature. If insurance applies, rear glass replacement is typically a comprehensive claim, and our lifetime workmanship warranty supports the install long after service.
Ford Ranger Raptor Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
The best aftercare for a Ford Ranger Raptor rear window replacement is to minimize stress on the glass while the urethane finishes curing. Begin by following the drive-away time provided; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is present, leave it in place—tape helps stabilize the rear windshield/back glass and keep moldings seated as the adhesive sets. Many jobs do well with roughly 24 hours of tape, and up to 48 hours in some situations. For the first 1–2 days, skip automated car washes, power washers, and anything that directs pressurized water at the window edge. Also avoid abrupt cabin-pressure changes: close doors softly, don’t slam the liftgate, and avoid blasting HVAC at the glass perimeter. If you can, steer clear of uneven construction roads on day one, since body twist and vibration can load the new glass before the bond is fully mature. After your first drive or first rain, do a quick inspection for dampness, wind noise, or moisture around trim and the cargo area, and report concerns promptly. Protect the rear defroster grid by cleaning with a soft cloth and mild, non-abrasive cleaner—no scraping or harsh chemicals.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Ford Ranger Raptor? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Ford Ranger Raptor Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
A Ford Ranger Raptor rear glass replacement often seems to take longer than expected because the clock includes more than the swap itself. Even if a traditional shop can replace the back glass in 1–3 hours of labor, the overall timeline can grow due to part availability, paperwork, drop-off logistics, and the time required after installation before the vehicle should be driven. Technicians remove the damaged rear windshield/back glass, vacuum and clear fragments, prep the bonding surface, and then set the new rear window in fresh urethane with precise alignment so the seal is even. Bang AutoGlass makes the process easier by bringing mobile auto glass service to you. For most Ford Ranger Raptor rear window replacements, the hands-on work typically takes about 30–45 minutes. We then ask you to keep the vehicle parked for at least 1 hour so the urethane reaches a conservative safe drive-away baseline. Many customers schedule the service like an extended meeting, not an all-day errand. If you’re using insurance, rear glass replacement is usually processed under comprehensive coverage, and we can work with any carrier that provides it. Our lifetime workmanship warranty backs the installation for long-term peace of mind.
Ford Ranger Raptor Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
The install time for a Ford Ranger Raptor rear window replacement depends on completing each step efficiently without cutting corners. We start by protecting interior surfaces, removing trim and moldings, and disconnecting anything tied to the back glass, such as defroster tabs or an integrated antenna lead. If the rear window shattered, loose fragments are removed and the parcel shelf, cargo area, and vents are vacuumed so glass chips don’t linger. Next is surface preparation on the pinch weld: old urethane is cut back, the area is cleaned and decontaminated, and any rust is addressed so the new adhesive bonds consistently. Depending on the adhesive system, primer or activator is applied to promote adhesion and help prevent corrosion. Fresh automotive urethane is then laid in a continuous bead, and the new rear windshield/back glass is set with precise alignment so the perimeter seats evenly and the hatch or trunk closes correctly. We finish by reinstalling moldings, verifying defroster connector alignment, applying retention tape if needed, and performing a quick inspection to catch gaps that can lead to wind noise or leaks. At Bang AutoGlass, this workflow typically takes about 30–45 minutes of hands-on work for most Ford Ranger Raptor back glass replacements, followed by the required stationary set time before driving.
Urethane Cure Time for Ford Ranger Raptor Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Ford Ranger Raptor back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Ford Ranger Raptor rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Ford Ranger Raptor Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Rear glass replacement cure time on a Ford Ranger Raptor depends on how fast the urethane adhesive can reach Minimum/Safe Drive-Away Time (MDAT/SDAT). Those times vary by adhesive formula and by conditions during service—especially ambient temperature and relative humidity. In colder weather, moisture-cure polyurethane typically reacts more slowly, so the bond takes longer to build early strength. Very dry air can also slow curing because many urethanes rely on moisture in the air. Heat usually speeds cure, but extreme heat can shorten open/working time, giving the technician less time to seat the Ford Ranger Raptor back glass before the bead skins over. Adhesive choice matters: fast-cure and advanced-cure urethanes are designed to hit MDAT sooner within specific ranges, and specialized systems may be selected for very low temperatures. Vehicle design plays a role too. Larger rear windshields/back glass on SUVs and hatchbacks have longer bead paths and more leverage, so correct bead height, proper primers, and clean pinch-weld prep are critical for a consistent seal. Bang AutoGlass plans materials and process around real on-site conditions for your Ford Ranger Raptor, then provides a clear drive-away recommendation you can follow.
When Is It Safe to Drive After Ford Ranger Raptor Rear Glass Replacement? Practical Drive-Away Rules
The safest answer to “when can I drive?” after a Ford Ranger Raptor rear window replacement is: when the urethane has reached MDAT/SDAT for the product and conditions used. MDAT (Minimum Drive-Away Time) and SDAT (Safe Drive-Away Time) describe the minimum stationary window needed for the bond to handle normal driving forces. Because cure speed changes with temperature, humidity, and adhesive formula, timing should come from the urethane manufacturer’s specifications—not a generic estimate. Fast-cure urethanes may allow earlier drive-away in ideal ranges, but cold or very dry weather often extends the time needed to hit the same safety threshold; extreme heat can also alter working time. Practical rule: protect the install during its most vulnerable period. Bang AutoGlass requires at least 1 hour with your Ford Ranger Raptor parked after the back glass is set before driving—no moving it around and no short trips. After you start driving, keep it gentle the rest of the day: avoid rough roads, don’t slam doors or the liftgate, and postpone high-speed driving while the bond continues to mature. If insurance applies, rear glass replacement is typically a comprehensive claim, and our lifetime workmanship warranty supports the install long after service.
Ford Ranger Raptor Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
The best aftercare for a Ford Ranger Raptor rear window replacement is to minimize stress on the glass while the urethane finishes curing. Begin by following the drive-away time provided; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is present, leave it in place—tape helps stabilize the rear windshield/back glass and keep moldings seated as the adhesive sets. Many jobs do well with roughly 24 hours of tape, and up to 48 hours in some situations. For the first 1–2 days, skip automated car washes, power washers, and anything that directs pressurized water at the window edge. Also avoid abrupt cabin-pressure changes: close doors softly, don’t slam the liftgate, and avoid blasting HVAC at the glass perimeter. If you can, steer clear of uneven construction roads on day one, since body twist and vibration can load the new glass before the bond is fully mature. After your first drive or first rain, do a quick inspection for dampness, wind noise, or moisture around trim and the cargo area, and report concerns promptly. Protect the rear defroster grid by cleaning with a soft cloth and mild, non-abrasive cleaner—no scraping or harsh chemicals.
Enjoy More Relevant Blogs
Tempered vs Laminated Door Glass on Dodge Ram 2500 Regular Cab: What’s Used and Why It Matters
Tempered vs laminated door glass on Dodge Ram 2500 Regular Cab: what your vehicle uses, how it breaks, and what it means for replacement safety, cost, and cleanup.
How to Schedule ADAS Calibration for Ford F250 Super Duty Crew Cab After Windshield Replacement
Schedule ADAS calibration for Ford F250 Super Duty Crew Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
After a Break-In: Dodge Challenger Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Dodge Challenger, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Will Insurance Cover Door Glass Replacement for a Ford Focus RS? Claims Steps, Deductibles, and What to Document
Will insurance cover Ford Focus RS door glass replacement? Learn claim steps, deductibles, photos to document, and how to schedule fast repairs today.
ADAS After Windshield Replacement on Gmc Terrain: Calibration Basics and Safety Checks
ADAS after Gmc Terrain windshield replacement: calibration basics, common safety checks, and how to confirm cameras and sensors are working correctly.
How to Schedule Mobile Rear Glass Replacement for Gmc Rally Wagon 2500
Schedule mobile rear glass replacement for your Gmc Rally Wagon 2500 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Stop Leaks and Wind Noise: What Proper Dodge Durango Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Dodge Durango quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Tempered Safety Rear Glass Replacement for Gmc Canyon Crew Cab: Understanding DOT Markings and FMVSS 205
Need Gmc Canyon Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Post-Install Checks for Gmc Sierra (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Gmc Sierra (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Fast Scheduling Guide: Gmc Sierra 3500 Hd Extended Cab Windshield Replacement From Booking to Install
Book Gmc Sierra 3500 Hd Extended Cab windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm