Services
Service Areas
How to Schedule ADAS Calibration for Ford Ranger Raptor After Windshield Replacement
Confirm Ford Ranger Raptor ADAS Features and OEM Calibration Requirements Before You Book
Scheduling ADAS calibration for a Ford Ranger Raptor should start with the OEM procedure for your VIN. After windshield replacement, many manufacturers require recalibration because the forward-facing camera behind the glass must be aimed to tight tolerances. That camera may support lane keep assist, lane departure warning, forward collision warning, automatic emergency braking, adaptive cruise control, traffic sign recognition, and intelligent high beams. Since the camera sees through the windshield, small changes in glass fitment, optical clarity, or camera seating can affect system accuracy. Before you book, confirm the method and prerequisites rather than assuming a one-size-fits-all service. Determine whether your Ford Ranger Raptor needs static calibration with targets and measured setup, dynamic calibration with an OEM-defined drive cycle, or both. Verify whether pre-repair and post-repair scans are required, which modules will be checked for diagnostic trouble codes, and whether the OEM calls out target dimensions, centerline measurements, steering angle resets, or battery-voltage thresholds before calibration will start. Bang AutoGlass reviews the Ford Ranger Raptor feature set, explains the calibration path in plain language, and schedules the correct workflow with your mobile glass service. You get next-day options, home or office appointments, coordination with any comprehensive insurance carrier, and a lifetime workmanship warranty.
When to Schedule Calibration After Windshield Replacement on Ford Ranger Raptor: Timing and Dependencies
Most drivers ask one thing: when should ADAS calibration be scheduled after a Ford Ranger Raptor windshield replacement? Best practice is to calibrate as soon as the vehicle is safely drivable and the prerequisites that affect sensor geometry are complete, because ADAS functions cannot be confidently verified until calibration finishes successfully. Start with safe drive-away time. Mobile windshield replacement typically takes 30-45 minutes, and the adhesive needs at least one hour of cure time before the vehicle is considered safe to drive. After that window, address dependencies that commonly cause inaccurate results or a failed routine: wheel alignment and thrust angle, suspension or ride-height work, correct tire size with evenly set pressures, a secure and undamaged windshield camera bracket, stable battery voltage, and no active diagnostic trouble codes in camera, radar (if equipped), steering, or parking-assist modules. If alignment or suspension work is planned, complete it first, then calibrate. If your Ford Ranger Raptor needs dynamic calibration, expect an OEM-defined service drive with specific speeds, road types, and clear lane markings, and avoid heavy rain or low light. We recommend booking the first available calibration appointment after replacement, often next day, to minimize time with unverified ADAS.
Static vs Dynamic ADAS Calibration for Ford Ranger Raptor: Choosing the Correct Method
On a Ford Ranger Raptor, the choice between static and dynamic ADAS calibration is set by the OEM routine for your VIN, not by preference. Static calibration is performed in a controlled environment. Technicians verify a level surface, position target boards or reflectors at specified distances, heights, and angles, and run the calibration sequence through the scan tool. Because the setup is measured and repeatable, static routines are commonly required for forward-facing camera calibration when tight tolerances matter. Dynamic calibration is completed while driving. The scan tool starts an OEM service drive, and the system learns using real-world lane markings and roadside features. Many Ford Ranger Raptor procedures require specific speed ranges and a minimum distance or time, and some also require prerequisites such as alignment confirmation, steering angle calibration, or a static routine before the drive cycle will finish. Dynamic completion can be sensitive to rain, glare, traffic interruptions, or faded striping, so route planning matters. To get it right, confirm OEM guidance by VIN and follow the scan tool workflow. Bang AutoGlass explains whether your Ford Ranger Raptor needs static, dynamic, or both, and schedules the correct path after mobile glass service.
Pre-Calibration Checklist: Pre-Scan, Vehicle Setup, and Environment Requirements
ADAS calibration is only as accurate as the setup, so a tight pre-calibration checklist for your Ford Ranger Raptor matters. Start with a diagnostic pre-scan to record diagnostic trouble codes (DTCs) and confirm key modules are communicating: forward-facing camera, radar (if equipped), steering/ABS, and body control. This baseline flags issues that can prevent windshield camera calibration from completing. Next, confirm the windshield replacement is ready for recalibration. Our mobile windshield replacement usually takes 30–45 minutes, then we require at least one hour of adhesive cure time before safe drive-away. That window also helps stabilize the camera bracket. Verify the camera is seated square, the bracket is secure, and the glass is spotless in the camera viewing area. Reinstall the mirror, wipers, trim, and rain/light sensors correctly so nothing blocks the lens. Finally, return the vehicle to OEM baseline: verify OE tire size, equalize tire pressures, remove heavy cargo, and confirm normal ride height. If alignment or suspension work is needed on your Ford Ranger Raptor, do it first. For static calibration, use level ground, consistent lighting, and OEM target distances. For dynamic, plan a route with clear lane markings. Bang AutoGlass can verify prerequisites and schedule calibration.
What Happens During Calibration on Ford Ranger Raptor: Targets, Road Procedures, and Verification Steps
During ADAS calibration on your Ford Ranger Raptor, the technician re-establishes the camera and sensor reference after windshield replacement so driver-assistance features interpret the road correctly. The visit starts by connecting an OEM-level scan tool, confirming the VIN-based procedure, and resolving any diagnostic trouble codes (DTCs) that could block calibration. Preconditions are checked because they affect results: tire pressure, ride height, steering angle center, and stable battery voltage. For static ADAS calibration, the Ford Ranger Raptor is positioned on verified level ground and targets/reflectors are placed at OEM-specified distances, heights, and angles. The technician measures from the vehicle centerline or thrust line, centers the steering, and controls lighting to reduce glare and false reads. The scan tool then runs the routine and records pass/fail for the forward-facing camera (and any related systems). For dynamic calibration, the scan tool initiates a drive cycle and the vehicle is driven on an OEM-defined route. Completion typically requires clear lane markings, a specific speed window, and steady conditions; if criteria are not met, the routine will not finish. Calibration ends with verification: a post-scan confirms status, confirms DTCs are cleared, and documents results. Bang AutoGlass provides documentation for your records.
Documentation to Request: Pre/Post Scan Reports and Calibration Results for Ford Ranger Raptor
After windshield replacement and ADAS calibration on a Ford Ranger Raptor, paperwork matters for safety and traceability. Ask for three items, starting with a pre-repair scan report. This captures diagnostic trouble codes (DTCs) that existed before service and helps separate pre-existing issues from anything found during the repair. The companion post-repair scan confirms which codes cleared and whether any modules still show faults. Second, request the calibration completion report. Depending on the tooling, it may be labeled a calibration certificate, recalibration report, or scan tool printout. It should include the VIN, date, and the specific systems calibrated, most commonly the forward-facing camera on your Ford Ranger Raptor and sometimes radar or other driver-assist functions. The report should state whether the procedure was static, dynamic, or a combined workflow and should clearly indicate successful completion. Third, ask for repair order notes referencing the OEM procedure and the prerequisites verified. Inputs like tire pressure, ride height, alignment status, camera bracket condition, and battery voltage affect calibration validity. If your provider can supply photos of the target layout or screenshots showing completion status, keep them with your records. Bang AutoGlass provides scan documentation, next-day mobile service, and a lifetime workmanship warranty.
Services
Service Areas
How to Schedule ADAS Calibration for Ford Ranger Raptor After Windshield Replacement
Confirm Ford Ranger Raptor ADAS Features and OEM Calibration Requirements Before You Book
Scheduling ADAS calibration for a Ford Ranger Raptor should start with the OEM procedure for your VIN. After windshield replacement, many manufacturers require recalibration because the forward-facing camera behind the glass must be aimed to tight tolerances. That camera may support lane keep assist, lane departure warning, forward collision warning, automatic emergency braking, adaptive cruise control, traffic sign recognition, and intelligent high beams. Since the camera sees through the windshield, small changes in glass fitment, optical clarity, or camera seating can affect system accuracy. Before you book, confirm the method and prerequisites rather than assuming a one-size-fits-all service. Determine whether your Ford Ranger Raptor needs static calibration with targets and measured setup, dynamic calibration with an OEM-defined drive cycle, or both. Verify whether pre-repair and post-repair scans are required, which modules will be checked for diagnostic trouble codes, and whether the OEM calls out target dimensions, centerline measurements, steering angle resets, or battery-voltage thresholds before calibration will start. Bang AutoGlass reviews the Ford Ranger Raptor feature set, explains the calibration path in plain language, and schedules the correct workflow with your mobile glass service. You get next-day options, home or office appointments, coordination with any comprehensive insurance carrier, and a lifetime workmanship warranty.
When to Schedule Calibration After Windshield Replacement on Ford Ranger Raptor: Timing and Dependencies
Most drivers ask one thing: when should ADAS calibration be scheduled after a Ford Ranger Raptor windshield replacement? Best practice is to calibrate as soon as the vehicle is safely drivable and the prerequisites that affect sensor geometry are complete, because ADAS functions cannot be confidently verified until calibration finishes successfully. Start with safe drive-away time. Mobile windshield replacement typically takes 30-45 minutes, and the adhesive needs at least one hour of cure time before the vehicle is considered safe to drive. After that window, address dependencies that commonly cause inaccurate results or a failed routine: wheel alignment and thrust angle, suspension or ride-height work, correct tire size with evenly set pressures, a secure and undamaged windshield camera bracket, stable battery voltage, and no active diagnostic trouble codes in camera, radar (if equipped), steering, or parking-assist modules. If alignment or suspension work is planned, complete it first, then calibrate. If your Ford Ranger Raptor needs dynamic calibration, expect an OEM-defined service drive with specific speeds, road types, and clear lane markings, and avoid heavy rain or low light. We recommend booking the first available calibration appointment after replacement, often next day, to minimize time with unverified ADAS.
Static vs Dynamic ADAS Calibration for Ford Ranger Raptor: Choosing the Correct Method
On a Ford Ranger Raptor, the choice between static and dynamic ADAS calibration is set by the OEM routine for your VIN, not by preference. Static calibration is performed in a controlled environment. Technicians verify a level surface, position target boards or reflectors at specified distances, heights, and angles, and run the calibration sequence through the scan tool. Because the setup is measured and repeatable, static routines are commonly required for forward-facing camera calibration when tight tolerances matter. Dynamic calibration is completed while driving. The scan tool starts an OEM service drive, and the system learns using real-world lane markings and roadside features. Many Ford Ranger Raptor procedures require specific speed ranges and a minimum distance or time, and some also require prerequisites such as alignment confirmation, steering angle calibration, or a static routine before the drive cycle will finish. Dynamic completion can be sensitive to rain, glare, traffic interruptions, or faded striping, so route planning matters. To get it right, confirm OEM guidance by VIN and follow the scan tool workflow. Bang AutoGlass explains whether your Ford Ranger Raptor needs static, dynamic, or both, and schedules the correct path after mobile glass service.
Pre-Calibration Checklist: Pre-Scan, Vehicle Setup, and Environment Requirements
ADAS calibration is only as accurate as the setup, so a tight pre-calibration checklist for your Ford Ranger Raptor matters. Start with a diagnostic pre-scan to record diagnostic trouble codes (DTCs) and confirm key modules are communicating: forward-facing camera, radar (if equipped), steering/ABS, and body control. This baseline flags issues that can prevent windshield camera calibration from completing. Next, confirm the windshield replacement is ready for recalibration. Our mobile windshield replacement usually takes 30–45 minutes, then we require at least one hour of adhesive cure time before safe drive-away. That window also helps stabilize the camera bracket. Verify the camera is seated square, the bracket is secure, and the glass is spotless in the camera viewing area. Reinstall the mirror, wipers, trim, and rain/light sensors correctly so nothing blocks the lens. Finally, return the vehicle to OEM baseline: verify OE tire size, equalize tire pressures, remove heavy cargo, and confirm normal ride height. If alignment or suspension work is needed on your Ford Ranger Raptor, do it first. For static calibration, use level ground, consistent lighting, and OEM target distances. For dynamic, plan a route with clear lane markings. Bang AutoGlass can verify prerequisites and schedule calibration.
What Happens During Calibration on Ford Ranger Raptor: Targets, Road Procedures, and Verification Steps
During ADAS calibration on your Ford Ranger Raptor, the technician re-establishes the camera and sensor reference after windshield replacement so driver-assistance features interpret the road correctly. The visit starts by connecting an OEM-level scan tool, confirming the VIN-based procedure, and resolving any diagnostic trouble codes (DTCs) that could block calibration. Preconditions are checked because they affect results: tire pressure, ride height, steering angle center, and stable battery voltage. For static ADAS calibration, the Ford Ranger Raptor is positioned on verified level ground and targets/reflectors are placed at OEM-specified distances, heights, and angles. The technician measures from the vehicle centerline or thrust line, centers the steering, and controls lighting to reduce glare and false reads. The scan tool then runs the routine and records pass/fail for the forward-facing camera (and any related systems). For dynamic calibration, the scan tool initiates a drive cycle and the vehicle is driven on an OEM-defined route. Completion typically requires clear lane markings, a specific speed window, and steady conditions; if criteria are not met, the routine will not finish. Calibration ends with verification: a post-scan confirms status, confirms DTCs are cleared, and documents results. Bang AutoGlass provides documentation for your records.
Documentation to Request: Pre/Post Scan Reports and Calibration Results for Ford Ranger Raptor
After windshield replacement and ADAS calibration on a Ford Ranger Raptor, paperwork matters for safety and traceability. Ask for three items, starting with a pre-repair scan report. This captures diagnostic trouble codes (DTCs) that existed before service and helps separate pre-existing issues from anything found during the repair. The companion post-repair scan confirms which codes cleared and whether any modules still show faults. Second, request the calibration completion report. Depending on the tooling, it may be labeled a calibration certificate, recalibration report, or scan tool printout. It should include the VIN, date, and the specific systems calibrated, most commonly the forward-facing camera on your Ford Ranger Raptor and sometimes radar or other driver-assist functions. The report should state whether the procedure was static, dynamic, or a combined workflow and should clearly indicate successful completion. Third, ask for repair order notes referencing the OEM procedure and the prerequisites verified. Inputs like tire pressure, ride height, alignment status, camera bracket condition, and battery voltage affect calibration validity. If your provider can supply photos of the target layout or screenshots showing completion status, keep them with your records. Bang AutoGlass provides scan documentation, next-day mobile service, and a lifetime workmanship warranty.
Services
Service Areas
How to Schedule ADAS Calibration for Ford Ranger Raptor After Windshield Replacement
Confirm Ford Ranger Raptor ADAS Features and OEM Calibration Requirements Before You Book
Scheduling ADAS calibration for a Ford Ranger Raptor should start with the OEM procedure for your VIN. After windshield replacement, many manufacturers require recalibration because the forward-facing camera behind the glass must be aimed to tight tolerances. That camera may support lane keep assist, lane departure warning, forward collision warning, automatic emergency braking, adaptive cruise control, traffic sign recognition, and intelligent high beams. Since the camera sees through the windshield, small changes in glass fitment, optical clarity, or camera seating can affect system accuracy. Before you book, confirm the method and prerequisites rather than assuming a one-size-fits-all service. Determine whether your Ford Ranger Raptor needs static calibration with targets and measured setup, dynamic calibration with an OEM-defined drive cycle, or both. Verify whether pre-repair and post-repair scans are required, which modules will be checked for diagnostic trouble codes, and whether the OEM calls out target dimensions, centerline measurements, steering angle resets, or battery-voltage thresholds before calibration will start. Bang AutoGlass reviews the Ford Ranger Raptor feature set, explains the calibration path in plain language, and schedules the correct workflow with your mobile glass service. You get next-day options, home or office appointments, coordination with any comprehensive insurance carrier, and a lifetime workmanship warranty.
When to Schedule Calibration After Windshield Replacement on Ford Ranger Raptor: Timing and Dependencies
Most drivers ask one thing: when should ADAS calibration be scheduled after a Ford Ranger Raptor windshield replacement? Best practice is to calibrate as soon as the vehicle is safely drivable and the prerequisites that affect sensor geometry are complete, because ADAS functions cannot be confidently verified until calibration finishes successfully. Start with safe drive-away time. Mobile windshield replacement typically takes 30-45 minutes, and the adhesive needs at least one hour of cure time before the vehicle is considered safe to drive. After that window, address dependencies that commonly cause inaccurate results or a failed routine: wheel alignment and thrust angle, suspension or ride-height work, correct tire size with evenly set pressures, a secure and undamaged windshield camera bracket, stable battery voltage, and no active diagnostic trouble codes in camera, radar (if equipped), steering, or parking-assist modules. If alignment or suspension work is planned, complete it first, then calibrate. If your Ford Ranger Raptor needs dynamic calibration, expect an OEM-defined service drive with specific speeds, road types, and clear lane markings, and avoid heavy rain or low light. We recommend booking the first available calibration appointment after replacement, often next day, to minimize time with unverified ADAS.
Static vs Dynamic ADAS Calibration for Ford Ranger Raptor: Choosing the Correct Method
On a Ford Ranger Raptor, the choice between static and dynamic ADAS calibration is set by the OEM routine for your VIN, not by preference. Static calibration is performed in a controlled environment. Technicians verify a level surface, position target boards or reflectors at specified distances, heights, and angles, and run the calibration sequence through the scan tool. Because the setup is measured and repeatable, static routines are commonly required for forward-facing camera calibration when tight tolerances matter. Dynamic calibration is completed while driving. The scan tool starts an OEM service drive, and the system learns using real-world lane markings and roadside features. Many Ford Ranger Raptor procedures require specific speed ranges and a minimum distance or time, and some also require prerequisites such as alignment confirmation, steering angle calibration, or a static routine before the drive cycle will finish. Dynamic completion can be sensitive to rain, glare, traffic interruptions, or faded striping, so route planning matters. To get it right, confirm OEM guidance by VIN and follow the scan tool workflow. Bang AutoGlass explains whether your Ford Ranger Raptor needs static, dynamic, or both, and schedules the correct path after mobile glass service.
Pre-Calibration Checklist: Pre-Scan, Vehicle Setup, and Environment Requirements
ADAS calibration is only as accurate as the setup, so a tight pre-calibration checklist for your Ford Ranger Raptor matters. Start with a diagnostic pre-scan to record diagnostic trouble codes (DTCs) and confirm key modules are communicating: forward-facing camera, radar (if equipped), steering/ABS, and body control. This baseline flags issues that can prevent windshield camera calibration from completing. Next, confirm the windshield replacement is ready for recalibration. Our mobile windshield replacement usually takes 30–45 minutes, then we require at least one hour of adhesive cure time before safe drive-away. That window also helps stabilize the camera bracket. Verify the camera is seated square, the bracket is secure, and the glass is spotless in the camera viewing area. Reinstall the mirror, wipers, trim, and rain/light sensors correctly so nothing blocks the lens. Finally, return the vehicle to OEM baseline: verify OE tire size, equalize tire pressures, remove heavy cargo, and confirm normal ride height. If alignment or suspension work is needed on your Ford Ranger Raptor, do it first. For static calibration, use level ground, consistent lighting, and OEM target distances. For dynamic, plan a route with clear lane markings. Bang AutoGlass can verify prerequisites and schedule calibration.
What Happens During Calibration on Ford Ranger Raptor: Targets, Road Procedures, and Verification Steps
During ADAS calibration on your Ford Ranger Raptor, the technician re-establishes the camera and sensor reference after windshield replacement so driver-assistance features interpret the road correctly. The visit starts by connecting an OEM-level scan tool, confirming the VIN-based procedure, and resolving any diagnostic trouble codes (DTCs) that could block calibration. Preconditions are checked because they affect results: tire pressure, ride height, steering angle center, and stable battery voltage. For static ADAS calibration, the Ford Ranger Raptor is positioned on verified level ground and targets/reflectors are placed at OEM-specified distances, heights, and angles. The technician measures from the vehicle centerline or thrust line, centers the steering, and controls lighting to reduce glare and false reads. The scan tool then runs the routine and records pass/fail for the forward-facing camera (and any related systems). For dynamic calibration, the scan tool initiates a drive cycle and the vehicle is driven on an OEM-defined route. Completion typically requires clear lane markings, a specific speed window, and steady conditions; if criteria are not met, the routine will not finish. Calibration ends with verification: a post-scan confirms status, confirms DTCs are cleared, and documents results. Bang AutoGlass provides documentation for your records.
Documentation to Request: Pre/Post Scan Reports and Calibration Results for Ford Ranger Raptor
After windshield replacement and ADAS calibration on a Ford Ranger Raptor, paperwork matters for safety and traceability. Ask for three items, starting with a pre-repair scan report. This captures diagnostic trouble codes (DTCs) that existed before service and helps separate pre-existing issues from anything found during the repair. The companion post-repair scan confirms which codes cleared and whether any modules still show faults. Second, request the calibration completion report. Depending on the tooling, it may be labeled a calibration certificate, recalibration report, or scan tool printout. It should include the VIN, date, and the specific systems calibrated, most commonly the forward-facing camera on your Ford Ranger Raptor and sometimes radar or other driver-assist functions. The report should state whether the procedure was static, dynamic, or a combined workflow and should clearly indicate successful completion. Third, ask for repair order notes referencing the OEM procedure and the prerequisites verified. Inputs like tire pressure, ride height, alignment status, camera bracket condition, and battery voltage affect calibration validity. If your provider can supply photos of the target layout or screenshots showing completion status, keep them with your records. Bang AutoGlass provides scan documentation, next-day mobile service, and a lifetime workmanship warranty.
Enjoy More Relevant Blogs
Tempered vs Laminated Door Glass on Dodge Ram 2500 Regular Cab: What’s Used and Why It Matters
Tempered vs laminated door glass on Dodge Ram 2500 Regular Cab: what your vehicle uses, how it breaks, and what it means for replacement safety, cost, and cleanup.
How to Schedule ADAS Calibration for Ford F250 Super Duty Crew Cab After Windshield Replacement
Schedule ADAS calibration for Ford F250 Super Duty Crew Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
After a Break-In: Dodge Challenger Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Dodge Challenger, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Will Insurance Cover Door Glass Replacement for a Ford Focus RS? Claims Steps, Deductibles, and What to Document
Will insurance cover Ford Focus RS door glass replacement? Learn claim steps, deductibles, photos to document, and how to schedule fast repairs today.
ADAS After Windshield Replacement on Gmc Terrain: Calibration Basics and Safety Checks
ADAS after Gmc Terrain windshield replacement: calibration basics, common safety checks, and how to confirm cameras and sensors are working correctly.
How to Schedule Mobile Rear Glass Replacement for Gmc Rally Wagon 2500
Schedule mobile rear glass replacement for your Gmc Rally Wagon 2500 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Stop Leaks and Wind Noise: What Proper Dodge Durango Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Dodge Durango quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Tempered Safety Rear Glass Replacement for Gmc Canyon Crew Cab: Understanding DOT Markings and FMVSS 205
Need Gmc Canyon Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Post-Install Checks for Gmc Sierra (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Gmc Sierra (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Fast Scheduling Guide: Gmc Sierra 3500 Hd Extended Cab Windshield Replacement From Booking to Install
Book Gmc Sierra 3500 Hd Extended Cab windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm