Services
Service Areas
Urethane Bonding for Gmc Yukon Xl 2500 Sunroof Glass Replacement: Why Adhesive Quality Matters
What Urethane Does in Gmc Yukon Xl 2500 Sunroof Glass Replacement: Sealing, Strength, and Vibration Control
In a Gmc Yukon Xl 2500, the urethane bond is what makes a sunroof glass replacement behave like a factory roof component, not an add-on. Automotive urethane is a direct-glazing polyurethane adhesive engineered to seal, retain, and dampen vibration in one system. When the bead is applied evenly and compressed correctly, it forms a continuous perimeter barrier that blocks water paths that can stain the headliner, damage trim, and create lingering odors. Once cured, urethane provides high retention strength while staying flexible, so the glass remains positioned as the body flexes and the roof opening moves through temperature swings. That elasticity also reduces NVH, helping prevent squeaks, rattles, and wind whistle when the glass is seated flush and evenly supported. Bang AutoGlass follows OEM-style bonding practices for Gmc Yukon Xl 2500 sunroof glass replacement so the roof system stays sealed and quiet over time. We bring mobile service to your home or workplace, often with next-day availability. Most replacements take about 30 to 45 minutes onsite, and we recommend at least one hour of adhesive set time before safe drive-away. Every replacement is backed by our lifetime workmanship warranty.
Choosing Adhesive Quality: Direct-Glazing Formulas, Crash-Test Performance, and Freshness Controls
Adhesive quality is a major separator between a "looks fine today" install and a long-lasting Gmc Yukon Xl 2500 sunroof glass replacement that stays quiet and dry. Urethane is not one generic glue; it is a family of one-component, moisture-cure polyurethanes engineered for direct-glazing automotive glass. Key properties drive results: viscosity helps the bead hold shape for consistent glass height, open or skin time sets the workable window before wet-out drops, and cure speed controls when the bond reaches handling strength. A true direct-glazing urethane is built to wet out on the glass frit and prepared metal, maintain bead geometry, and cure into a strong-yet-flexible bond line that tolerates heat cycles, vibration, and body movement. Shops should follow the product data sheet so cleaners, primers or activators, and flash times match the adhesive system, and drive-away timing fits the day's temperature and humidity. Freshness matters because urethane has a shelf life; expired or poorly stored cartridges can cure unpredictably and raise the risk of edge lift or water tracking. At Bang AutoGlass, we verify expiration dates, rotate inventory, and record batch or lot information for every Gmc Yukon Xl 2500 job. If you are using insurance, we accept all comprehensive carriers and keep it convenient with mobile service when available.
Surface Prep That Makes the Bond: Cleaning, Pinchweld Protection, and Primer/Activator Steps
Surface preparation is where most sunroof leaks and wind-noise issues are either prevented or unintentionally built into the job. For Gmc Yukon Xl 2500 sunroof glass replacement, we cover the interior, remove the damaged glass, and clear all fragments so nothing ends up in tracks, drains, or the perimeter bonding channel. Next we evaluate the pinchweld (roof bonding flange). Rather than scraping to bare metal, we typically trim the existing urethane to an even, stable base; that uniform foundation improves bead control and supports the correct glass height. If we find scratches through paint, exposed metal, or corrosion, we protect the area immediately so rust does not spread under the new bond line. Then we complete chemical prep with approved cleaners and lint-free wipes to remove dust and oils, and we avoid touching prepped surfaces. Based on the urethane system, we apply the specified activator and or primer to the glass frit and required body areas and allow proper flash time. Finally, we dry-fit and confirm alignment so the new Gmc Yukon Xl 2500 sunroof glass seats flush and compresses evenly for a consistent seal. This preparation-first workflow supports the lifetime workmanship warranty we provide.
Bead Design and Application for Gmc Yukon Xl 2500: Open Time, Bead Height, and Proper Tooling
Bead design determines whether a Gmc Yukon Xl 2500 sunroof glass replacement behaves like an OEM install or becomes a leak and wind-noise issue. The urethane bead must be continuous and matched to the factory footprint so it can seal water out, hold the glass at the correct height, and absorb vibration. Timing is critical: once urethane is dispensed it begins to skin, and setting the glass outside the adhesive open time can reduce wet-out and adhesion. At Bang AutoGlass, we stage the job so dry-fit checks, alignment points, and trim interfaces are confirmed before dispensing. Then we lay the bead and set the glass promptly and squarely. Professional tooling matters: a high-thrust gun and a notched nozzle help create a stable V-bead that stays consistent through corners and transitions instead of slumping or thinning. Bead height is a balance. Too little height can leave thin spots and micro-gaps that become leaks; too much can prevent proper seating, cause excessive squeeze-out, or push moldings out of position. After placement, the glass is lowered in a controlled motion and pressed evenly-no rocking or smearing-so the bond line contacts uniformly without trapping air. The outcome is a sealed, flush Gmc Yukon Xl 2500 sunroof glass replacement built to resist water intrusion, wind whistle, and vibration over time.
Cure Time and Safe-Use Timing: Temperature/Humidity Effects and Minimum Drive-Away Guidance
Urethane doesn't "finish" when the glass is set; it keeps curing as it absorbs moisture from the air, and temperature and humidity shape that curve. For a Gmc Yukon Xl 2500 sunroof glass replacement, warm and humid conditions generally help the adhesive reach early handling strength sooner, while cold weather or very dry air can slow the process. Different direct-glazing urethanes have different safe drive-away ratings, so follow the product data sheet (PDS) for the exact adhesive and conditions at the job site. Protecting the bond early is key: the bead is still developing internal strength during the first hours, even if the edges feel firm. For most Gmc Yukon Xl 2500 installations, a minimum one-hour set period before normal driving is a reasonable baseline, but in cold, windy, or unusually dry conditions, adding extra time reduces risk. During the initial cure window, close doors gently, avoid rough roads and aggressive highway speeds when possible, and skip automatic or high-pressure washes for at least 48 hours. These steps help the perimeter seal stay intact, reduce wind-whistle risk, and allow the urethane to reach the flexibility and strength it was engineered to provide. Bang AutoGlass will give job-specific guidance at your appointment.
Post-Bond Quality Checks on Gmc Yukon Xl 2500: Leak Testing, Wind Noise, Flush Fit, and Documentation
A Gmc Yukon Xl 2500 sunroof glass replacement is complete only after quality checks confirm the bond is sealed, quiet, and visually correct. First we verify flush fit and alignment across the roofline: consistent reveal gaps, even corner height, and uniform compression on the urethane bead so you don't get high spots, low corners, rattles, or wind whistle. We also confirm trims, moldings, and any encapsulated edges are reinstalled cleanly and aren't lifting, pinching, or interfering with drainage paths. Next we focus on leak prevention. When conditions allow, we run a controlled water test around the perimeter and check for moisture tracking into the headliner, pillars, or interior trim. We also look for common "sunroof leak" contributors that aren't the bond itself, such as debris in channels or restricted drains, and we flag anything visible so the root cause gets addressed. For wind-noise control, we confirm continuous bead contact, clean edges, and a uniform seat that prevents whistles at highway speeds. Finally, we document the work and set expectations: after-install notes, care instructions (including safe drive-away timing), and warranty coverage. Bang AutoGlass backs installations with a lifetime workmanship warranty and makes comprehensive insurance claims straightforward when applicable.
Services
Service Areas
Urethane Bonding for Gmc Yukon Xl 2500 Sunroof Glass Replacement: Why Adhesive Quality Matters
What Urethane Does in Gmc Yukon Xl 2500 Sunroof Glass Replacement: Sealing, Strength, and Vibration Control
In a Gmc Yukon Xl 2500, the urethane bond is what makes a sunroof glass replacement behave like a factory roof component, not an add-on. Automotive urethane is a direct-glazing polyurethane adhesive engineered to seal, retain, and dampen vibration in one system. When the bead is applied evenly and compressed correctly, it forms a continuous perimeter barrier that blocks water paths that can stain the headliner, damage trim, and create lingering odors. Once cured, urethane provides high retention strength while staying flexible, so the glass remains positioned as the body flexes and the roof opening moves through temperature swings. That elasticity also reduces NVH, helping prevent squeaks, rattles, and wind whistle when the glass is seated flush and evenly supported. Bang AutoGlass follows OEM-style bonding practices for Gmc Yukon Xl 2500 sunroof glass replacement so the roof system stays sealed and quiet over time. We bring mobile service to your home or workplace, often with next-day availability. Most replacements take about 30 to 45 minutes onsite, and we recommend at least one hour of adhesive set time before safe drive-away. Every replacement is backed by our lifetime workmanship warranty.
Choosing Adhesive Quality: Direct-Glazing Formulas, Crash-Test Performance, and Freshness Controls
Adhesive quality is a major separator between a "looks fine today" install and a long-lasting Gmc Yukon Xl 2500 sunroof glass replacement that stays quiet and dry. Urethane is not one generic glue; it is a family of one-component, moisture-cure polyurethanes engineered for direct-glazing automotive glass. Key properties drive results: viscosity helps the bead hold shape for consistent glass height, open or skin time sets the workable window before wet-out drops, and cure speed controls when the bond reaches handling strength. A true direct-glazing urethane is built to wet out on the glass frit and prepared metal, maintain bead geometry, and cure into a strong-yet-flexible bond line that tolerates heat cycles, vibration, and body movement. Shops should follow the product data sheet so cleaners, primers or activators, and flash times match the adhesive system, and drive-away timing fits the day's temperature and humidity. Freshness matters because urethane has a shelf life; expired or poorly stored cartridges can cure unpredictably and raise the risk of edge lift or water tracking. At Bang AutoGlass, we verify expiration dates, rotate inventory, and record batch or lot information for every Gmc Yukon Xl 2500 job. If you are using insurance, we accept all comprehensive carriers and keep it convenient with mobile service when available.
Surface Prep That Makes the Bond: Cleaning, Pinchweld Protection, and Primer/Activator Steps
Surface preparation is where most sunroof leaks and wind-noise issues are either prevented or unintentionally built into the job. For Gmc Yukon Xl 2500 sunroof glass replacement, we cover the interior, remove the damaged glass, and clear all fragments so nothing ends up in tracks, drains, or the perimeter bonding channel. Next we evaluate the pinchweld (roof bonding flange). Rather than scraping to bare metal, we typically trim the existing urethane to an even, stable base; that uniform foundation improves bead control and supports the correct glass height. If we find scratches through paint, exposed metal, or corrosion, we protect the area immediately so rust does not spread under the new bond line. Then we complete chemical prep with approved cleaners and lint-free wipes to remove dust and oils, and we avoid touching prepped surfaces. Based on the urethane system, we apply the specified activator and or primer to the glass frit and required body areas and allow proper flash time. Finally, we dry-fit and confirm alignment so the new Gmc Yukon Xl 2500 sunroof glass seats flush and compresses evenly for a consistent seal. This preparation-first workflow supports the lifetime workmanship warranty we provide.
Bead Design and Application for Gmc Yukon Xl 2500: Open Time, Bead Height, and Proper Tooling
Bead design determines whether a Gmc Yukon Xl 2500 sunroof glass replacement behaves like an OEM install or becomes a leak and wind-noise issue. The urethane bead must be continuous and matched to the factory footprint so it can seal water out, hold the glass at the correct height, and absorb vibration. Timing is critical: once urethane is dispensed it begins to skin, and setting the glass outside the adhesive open time can reduce wet-out and adhesion. At Bang AutoGlass, we stage the job so dry-fit checks, alignment points, and trim interfaces are confirmed before dispensing. Then we lay the bead and set the glass promptly and squarely. Professional tooling matters: a high-thrust gun and a notched nozzle help create a stable V-bead that stays consistent through corners and transitions instead of slumping or thinning. Bead height is a balance. Too little height can leave thin spots and micro-gaps that become leaks; too much can prevent proper seating, cause excessive squeeze-out, or push moldings out of position. After placement, the glass is lowered in a controlled motion and pressed evenly-no rocking or smearing-so the bond line contacts uniformly without trapping air. The outcome is a sealed, flush Gmc Yukon Xl 2500 sunroof glass replacement built to resist water intrusion, wind whistle, and vibration over time.
Cure Time and Safe-Use Timing: Temperature/Humidity Effects and Minimum Drive-Away Guidance
Urethane doesn't "finish" when the glass is set; it keeps curing as it absorbs moisture from the air, and temperature and humidity shape that curve. For a Gmc Yukon Xl 2500 sunroof glass replacement, warm and humid conditions generally help the adhesive reach early handling strength sooner, while cold weather or very dry air can slow the process. Different direct-glazing urethanes have different safe drive-away ratings, so follow the product data sheet (PDS) for the exact adhesive and conditions at the job site. Protecting the bond early is key: the bead is still developing internal strength during the first hours, even if the edges feel firm. For most Gmc Yukon Xl 2500 installations, a minimum one-hour set period before normal driving is a reasonable baseline, but in cold, windy, or unusually dry conditions, adding extra time reduces risk. During the initial cure window, close doors gently, avoid rough roads and aggressive highway speeds when possible, and skip automatic or high-pressure washes for at least 48 hours. These steps help the perimeter seal stay intact, reduce wind-whistle risk, and allow the urethane to reach the flexibility and strength it was engineered to provide. Bang AutoGlass will give job-specific guidance at your appointment.
Post-Bond Quality Checks on Gmc Yukon Xl 2500: Leak Testing, Wind Noise, Flush Fit, and Documentation
A Gmc Yukon Xl 2500 sunroof glass replacement is complete only after quality checks confirm the bond is sealed, quiet, and visually correct. First we verify flush fit and alignment across the roofline: consistent reveal gaps, even corner height, and uniform compression on the urethane bead so you don't get high spots, low corners, rattles, or wind whistle. We also confirm trims, moldings, and any encapsulated edges are reinstalled cleanly and aren't lifting, pinching, or interfering with drainage paths. Next we focus on leak prevention. When conditions allow, we run a controlled water test around the perimeter and check for moisture tracking into the headliner, pillars, or interior trim. We also look for common "sunroof leak" contributors that aren't the bond itself, such as debris in channels or restricted drains, and we flag anything visible so the root cause gets addressed. For wind-noise control, we confirm continuous bead contact, clean edges, and a uniform seat that prevents whistles at highway speeds. Finally, we document the work and set expectations: after-install notes, care instructions (including safe drive-away timing), and warranty coverage. Bang AutoGlass backs installations with a lifetime workmanship warranty and makes comprehensive insurance claims straightforward when applicable.
Services
Service Areas
Urethane Bonding for Gmc Yukon Xl 2500 Sunroof Glass Replacement: Why Adhesive Quality Matters
What Urethane Does in Gmc Yukon Xl 2500 Sunroof Glass Replacement: Sealing, Strength, and Vibration Control
In a Gmc Yukon Xl 2500, the urethane bond is what makes a sunroof glass replacement behave like a factory roof component, not an add-on. Automotive urethane is a direct-glazing polyurethane adhesive engineered to seal, retain, and dampen vibration in one system. When the bead is applied evenly and compressed correctly, it forms a continuous perimeter barrier that blocks water paths that can stain the headliner, damage trim, and create lingering odors. Once cured, urethane provides high retention strength while staying flexible, so the glass remains positioned as the body flexes and the roof opening moves through temperature swings. That elasticity also reduces NVH, helping prevent squeaks, rattles, and wind whistle when the glass is seated flush and evenly supported. Bang AutoGlass follows OEM-style bonding practices for Gmc Yukon Xl 2500 sunroof glass replacement so the roof system stays sealed and quiet over time. We bring mobile service to your home or workplace, often with next-day availability. Most replacements take about 30 to 45 minutes onsite, and we recommend at least one hour of adhesive set time before safe drive-away. Every replacement is backed by our lifetime workmanship warranty.
Choosing Adhesive Quality: Direct-Glazing Formulas, Crash-Test Performance, and Freshness Controls
Adhesive quality is a major separator between a "looks fine today" install and a long-lasting Gmc Yukon Xl 2500 sunroof glass replacement that stays quiet and dry. Urethane is not one generic glue; it is a family of one-component, moisture-cure polyurethanes engineered for direct-glazing automotive glass. Key properties drive results: viscosity helps the bead hold shape for consistent glass height, open or skin time sets the workable window before wet-out drops, and cure speed controls when the bond reaches handling strength. A true direct-glazing urethane is built to wet out on the glass frit and prepared metal, maintain bead geometry, and cure into a strong-yet-flexible bond line that tolerates heat cycles, vibration, and body movement. Shops should follow the product data sheet so cleaners, primers or activators, and flash times match the adhesive system, and drive-away timing fits the day's temperature and humidity. Freshness matters because urethane has a shelf life; expired or poorly stored cartridges can cure unpredictably and raise the risk of edge lift or water tracking. At Bang AutoGlass, we verify expiration dates, rotate inventory, and record batch or lot information for every Gmc Yukon Xl 2500 job. If you are using insurance, we accept all comprehensive carriers and keep it convenient with mobile service when available.
Surface Prep That Makes the Bond: Cleaning, Pinchweld Protection, and Primer/Activator Steps
Surface preparation is where most sunroof leaks and wind-noise issues are either prevented or unintentionally built into the job. For Gmc Yukon Xl 2500 sunroof glass replacement, we cover the interior, remove the damaged glass, and clear all fragments so nothing ends up in tracks, drains, or the perimeter bonding channel. Next we evaluate the pinchweld (roof bonding flange). Rather than scraping to bare metal, we typically trim the existing urethane to an even, stable base; that uniform foundation improves bead control and supports the correct glass height. If we find scratches through paint, exposed metal, or corrosion, we protect the area immediately so rust does not spread under the new bond line. Then we complete chemical prep with approved cleaners and lint-free wipes to remove dust and oils, and we avoid touching prepped surfaces. Based on the urethane system, we apply the specified activator and or primer to the glass frit and required body areas and allow proper flash time. Finally, we dry-fit and confirm alignment so the new Gmc Yukon Xl 2500 sunroof glass seats flush and compresses evenly for a consistent seal. This preparation-first workflow supports the lifetime workmanship warranty we provide.
Bead Design and Application for Gmc Yukon Xl 2500: Open Time, Bead Height, and Proper Tooling
Bead design determines whether a Gmc Yukon Xl 2500 sunroof glass replacement behaves like an OEM install or becomes a leak and wind-noise issue. The urethane bead must be continuous and matched to the factory footprint so it can seal water out, hold the glass at the correct height, and absorb vibration. Timing is critical: once urethane is dispensed it begins to skin, and setting the glass outside the adhesive open time can reduce wet-out and adhesion. At Bang AutoGlass, we stage the job so dry-fit checks, alignment points, and trim interfaces are confirmed before dispensing. Then we lay the bead and set the glass promptly and squarely. Professional tooling matters: a high-thrust gun and a notched nozzle help create a stable V-bead that stays consistent through corners and transitions instead of slumping or thinning. Bead height is a balance. Too little height can leave thin spots and micro-gaps that become leaks; too much can prevent proper seating, cause excessive squeeze-out, or push moldings out of position. After placement, the glass is lowered in a controlled motion and pressed evenly-no rocking or smearing-so the bond line contacts uniformly without trapping air. The outcome is a sealed, flush Gmc Yukon Xl 2500 sunroof glass replacement built to resist water intrusion, wind whistle, and vibration over time.
Cure Time and Safe-Use Timing: Temperature/Humidity Effects and Minimum Drive-Away Guidance
Urethane doesn't "finish" when the glass is set; it keeps curing as it absorbs moisture from the air, and temperature and humidity shape that curve. For a Gmc Yukon Xl 2500 sunroof glass replacement, warm and humid conditions generally help the adhesive reach early handling strength sooner, while cold weather or very dry air can slow the process. Different direct-glazing urethanes have different safe drive-away ratings, so follow the product data sheet (PDS) for the exact adhesive and conditions at the job site. Protecting the bond early is key: the bead is still developing internal strength during the first hours, even if the edges feel firm. For most Gmc Yukon Xl 2500 installations, a minimum one-hour set period before normal driving is a reasonable baseline, but in cold, windy, or unusually dry conditions, adding extra time reduces risk. During the initial cure window, close doors gently, avoid rough roads and aggressive highway speeds when possible, and skip automatic or high-pressure washes for at least 48 hours. These steps help the perimeter seal stay intact, reduce wind-whistle risk, and allow the urethane to reach the flexibility and strength it was engineered to provide. Bang AutoGlass will give job-specific guidance at your appointment.
Post-Bond Quality Checks on Gmc Yukon Xl 2500: Leak Testing, Wind Noise, Flush Fit, and Documentation
A Gmc Yukon Xl 2500 sunroof glass replacement is complete only after quality checks confirm the bond is sealed, quiet, and visually correct. First we verify flush fit and alignment across the roofline: consistent reveal gaps, even corner height, and uniform compression on the urethane bead so you don't get high spots, low corners, rattles, or wind whistle. We also confirm trims, moldings, and any encapsulated edges are reinstalled cleanly and aren't lifting, pinching, or interfering with drainage paths. Next we focus on leak prevention. When conditions allow, we run a controlled water test around the perimeter and check for moisture tracking into the headliner, pillars, or interior trim. We also look for common "sunroof leak" contributors that aren't the bond itself, such as debris in channels or restricted drains, and we flag anything visible so the root cause gets addressed. For wind-noise control, we confirm continuous bead contact, clean edges, and a uniform seat that prevents whistles at highway speeds. Finally, we document the work and set expectations: after-install notes, care instructions (including safe drive-away timing), and warranty coverage. Bang AutoGlass backs installations with a lifetime workmanship warranty and makes comprehensive insurance claims straightforward when applicable.
Enjoy More Relevant Blogs
Tempered vs Laminated Door Glass on Dodge Ram 2500 Regular Cab: What’s Used and Why It Matters
Tempered vs laminated door glass on Dodge Ram 2500 Regular Cab: what your vehicle uses, how it breaks, and what it means for replacement safety, cost, and cleanup.
How to Schedule ADAS Calibration for Ford F250 Super Duty Crew Cab After Windshield Replacement
Schedule ADAS calibration for Ford F250 Super Duty Crew Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
After a Break-In: Dodge Challenger Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Dodge Challenger, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Will Insurance Cover Door Glass Replacement for a Ford Focus RS? Claims Steps, Deductibles, and What to Document
Will insurance cover Ford Focus RS door glass replacement? Learn claim steps, deductibles, photos to document, and how to schedule fast repairs today.
ADAS After Windshield Replacement on Gmc Terrain: Calibration Basics and Safety Checks
ADAS after Gmc Terrain windshield replacement: calibration basics, common safety checks, and how to confirm cameras and sensors are working correctly.
How to Schedule Mobile Rear Glass Replacement for Gmc Rally Wagon 2500
Schedule mobile rear glass replacement for your Gmc Rally Wagon 2500 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Stop Leaks and Wind Noise: What Proper Dodge Durango Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Dodge Durango quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Tempered Safety Rear Glass Replacement for Gmc Canyon Crew Cab: Understanding DOT Markings and FMVSS 205
Need Gmc Canyon Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Post-Install Checks for Gmc Sierra (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Gmc Sierra (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Fast Scheduling Guide: Gmc Sierra 3500 Hd Extended Cab Windshield Replacement From Booking to Install
Book Gmc Sierra 3500 Hd Extended Cab windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm