Services
Service Areas
ADAS Calibration Checklist for Gmc Yukon XL Denali: Documentation, Verification, and Final Safety Checks
Identify Gmc Yukon XL Denali ADAS Systems and OEM Calibration Triggers
Calibrating ADAS on a Gmc Yukon XL Denali starts by confirming which driver-assist features are installed and which OEM events require calibration. Decode the VIN and verify trim and option packages, then run a full diagnostic scan that lists ADAS modules and sensor configurations. Common components include a windshield forward camera for lane functions, front radar for adaptive cruise and emergency braking, rear corner radar for blind spot monitoring, and park-assist ultrasonics or surround-view cameras. If the equipment list is unclear, verify it in OEM service information so no static or dynamic routine is missed. Next, match the repair to the OEM trigger list. Windshield replacement on a Gmc Yukon XL Denali with a bonded camera bracket often requires camera calibration because glass fit, bracket position, or camera R&I can change aim. Other triggers include sensor R&I, bracket repairs, module replacement or programming, wheel alignment, tire-size or ride-height changes, and DTCs indicating an adaptation or basic setting is needed. The checklist goal is to map each Gmc Yukon XL Denali system to the exact OEM workflow, then verify results so safety features operate as designed.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Pre-calibration documentation makes ADAS work on a Gmc Yukon XL Denali verifiable, insurer-ready, and aligned to OEM guidance. Start with a pre-repair diagnostic scan to capture the DTC baseline across camera and radar modules, ABS/ESC, steering angle, and related body or gateway systems. Then plan for a post-scan to confirm all modules return to normal status after repair. Build a clear narrative that connects the baseline to the calibration trigger. Record the customer concern, VIN, and mileage, then document the work performed: windshield replacement on a Gmc Yukon XL Denali with a camera bracket, camera or radar removal and installation, bumper/grille repairs near the radar, alignment or suspension changes, module replacement, or software updates. Add photos of the windshield, camera bracket, and sensor mounts, plus any damage or aftermarket parts that could affect aim. Package the evidence for review: save the full pre-scan report (current, pending, and history codes when available), freeze-frame data, and scan tool platform/software version, and note whether the OEM calls for static, dynamic, or combined calibration. Bang AutoGlass works with all carriers when comprehensive coverage applies, and complete documentation helps reduce claim delays and supports our lifetime workmanship warranty.
Vehicle Readiness Checklist for Gmc Yukon XL Denali: Tires, Alignment, Ride Height, and Sensor/Glass Prep
A reliable calibration depends on vehicle readiness. For a Gmc Yukon XL Denali, confirm tires are OEM-approved, matched side-to-side, evenly worn, and inflated to spec. Wrong tire size, low pressure, or uneven tread changes rolling radius and steering calculations and can distort lane keeping and adaptive cruise behavior. Verify wheel alignment is within OEM specifications before calibrating; toe, thrust angle, and steering angle sensor values influence how cameras and radar interpret the lane. Next, confirm ride height and loading. Remove heavy cargo, keep the spare tire in place, and maintain normal operating weight; many OEM procedures also specify a minimum fuel level. Aftermarket lifts/levels, non-OEM wheel packages, damaged springs, or unresolved collision damage are common go/no-go issues because they change sensor geometry. Finish with sensor and glass preparation. If the Gmc Yukon XL Denali uses a windshield-mounted camera, inspect the bracket, verify the correct windshield and attachments, and keep the camera view area clean and dry with no stickers, haze, tint artifacts, or residue. Confirm wiper and cowl fitment, ensure radar sensors are seated and unobstructed, and remove anything that blocks sightlines. At Bang AutoGlass, windshield replacement typically takes 30-45 minutes; allow at least one hour of safe drive-away time before dynamic calibration driving.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
OEM-compliant setup prevents ADAS calibration failures on a Gmc Yukon XL Denali. Measure level across the working footprint, including where targets will stand, and keep the area clean so stands do not settle. Set the vehicle reference by establishing centerline and thrust line, centering the steering wheel, and keeping the vehicle straight. Verify OEM-specified space so targets can be positioned at exact distances, offsets, and heights. Stabilize the environment. Avoid sunlight, windshield glare, flicker, deep shadows, rain, dust, and bay traffic that changes lighting. Select the correct OEM targets for the system being calibrated (camera, radar, surround-view) and inspect boards for fading, creases, or contamination. Confirm stands and measurement tools are accurate and locked down. Verify scan tool coverage for the Gmc Yukon XL Denali, select the correct routine for year and trim, and record tool and software versions on the work order. Maintain voltage with a battery maintainer. Follow OEM no-touch requirements during static routines: keep doors closed, avoid leaning on the vehicle, and do not enter the cabin unless directed. These disciplines deliver repeatable results and fewer comebacks at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Gmc Yukon XL Denali
For a Gmc Yukon XL Denali, verification links completion to performance. Start with a post-repair scan as soon as the routine ends. Review camera and radar module status, clear any setup codes, and re-scan to confirm no DTCs remain current or pending. Failed-attempt or communication codes may not illuminate the dash, yet OEM and insurer processes often expect documented post-scan proof. Perform any OEM-directed road validation. If dynamic calibration is required, meet the conditions for roadway type, lane-marking quality, speed band, and minimum duration, and avoid weather or lighting restrictions that invalidate learning. Use a route with consistent lane lines and safe traffic flow. Confirm lane keeping and lane departure behave predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false warn. Validate blind spot and rear cross-traffic alerts where equipped. After windshield work on a Gmc Yukon XL Denali, allow cure time before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and the adhesive needs at least one hour of safe drive-away time before dynamic driving. Finish by confirming the cluster is clear. If warnings persist, recheck alignment, tire spec, ride height, sensor mounting, and glass fitment, then follow the OEM troubleshooting and recalibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Gmc Yukon XL Denali
Closeout records protect the driver and the claim after ADAS work on a Gmc Yukon XL Denali. Build a packet that can be reviewed later without context. Include the scan tool calibration report with VIN, date/time, routine identification, calibrated modules, and pass or fail outcome. Attach pre-scan and post-scan reports to document DTC status before and after service. Document prerequisites and setup with photos of sensor mounting points and the windshield or camera bracket area, plus images showing target placement when static calibration was performed. Include required measurements or alignment printouts. If the Gmc Yukon XL Denali required dynamic calibration or validation driving, record the OEM routine name, conditions met (speed band, duration), and confirmation that no ADAS warnings were present at completion. Log scan tool platform, software version, target or fixture set used, and battery maintainer usage for compliance and reimbursement. Provide the customer a copy with the invoice and guidance if a warning returns. Bang AutoGlass accepts all insurance companies when comprehensive coverage applies, and thorough documentation reduces back-and-forth while supporting our lifetime workmanship warranty. Retain the packet per policy for each Gmc Yukon XL Denali.
Services
Service Areas
ADAS Calibration Checklist for Gmc Yukon XL Denali: Documentation, Verification, and Final Safety Checks
Identify Gmc Yukon XL Denali ADAS Systems and OEM Calibration Triggers
Calibrating ADAS on a Gmc Yukon XL Denali starts by confirming which driver-assist features are installed and which OEM events require calibration. Decode the VIN and verify trim and option packages, then run a full diagnostic scan that lists ADAS modules and sensor configurations. Common components include a windshield forward camera for lane functions, front radar for adaptive cruise and emergency braking, rear corner radar for blind spot monitoring, and park-assist ultrasonics or surround-view cameras. If the equipment list is unclear, verify it in OEM service information so no static or dynamic routine is missed. Next, match the repair to the OEM trigger list. Windshield replacement on a Gmc Yukon XL Denali with a bonded camera bracket often requires camera calibration because glass fit, bracket position, or camera R&I can change aim. Other triggers include sensor R&I, bracket repairs, module replacement or programming, wheel alignment, tire-size or ride-height changes, and DTCs indicating an adaptation or basic setting is needed. The checklist goal is to map each Gmc Yukon XL Denali system to the exact OEM workflow, then verify results so safety features operate as designed.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Pre-calibration documentation makes ADAS work on a Gmc Yukon XL Denali verifiable, insurer-ready, and aligned to OEM guidance. Start with a pre-repair diagnostic scan to capture the DTC baseline across camera and radar modules, ABS/ESC, steering angle, and related body or gateway systems. Then plan for a post-scan to confirm all modules return to normal status after repair. Build a clear narrative that connects the baseline to the calibration trigger. Record the customer concern, VIN, and mileage, then document the work performed: windshield replacement on a Gmc Yukon XL Denali with a camera bracket, camera or radar removal and installation, bumper/grille repairs near the radar, alignment or suspension changes, module replacement, or software updates. Add photos of the windshield, camera bracket, and sensor mounts, plus any damage or aftermarket parts that could affect aim. Package the evidence for review: save the full pre-scan report (current, pending, and history codes when available), freeze-frame data, and scan tool platform/software version, and note whether the OEM calls for static, dynamic, or combined calibration. Bang AutoGlass works with all carriers when comprehensive coverage applies, and complete documentation helps reduce claim delays and supports our lifetime workmanship warranty.
Vehicle Readiness Checklist for Gmc Yukon XL Denali: Tires, Alignment, Ride Height, and Sensor/Glass Prep
A reliable calibration depends on vehicle readiness. For a Gmc Yukon XL Denali, confirm tires are OEM-approved, matched side-to-side, evenly worn, and inflated to spec. Wrong tire size, low pressure, or uneven tread changes rolling radius and steering calculations and can distort lane keeping and adaptive cruise behavior. Verify wheel alignment is within OEM specifications before calibrating; toe, thrust angle, and steering angle sensor values influence how cameras and radar interpret the lane. Next, confirm ride height and loading. Remove heavy cargo, keep the spare tire in place, and maintain normal operating weight; many OEM procedures also specify a minimum fuel level. Aftermarket lifts/levels, non-OEM wheel packages, damaged springs, or unresolved collision damage are common go/no-go issues because they change sensor geometry. Finish with sensor and glass preparation. If the Gmc Yukon XL Denali uses a windshield-mounted camera, inspect the bracket, verify the correct windshield and attachments, and keep the camera view area clean and dry with no stickers, haze, tint artifacts, or residue. Confirm wiper and cowl fitment, ensure radar sensors are seated and unobstructed, and remove anything that blocks sightlines. At Bang AutoGlass, windshield replacement typically takes 30-45 minutes; allow at least one hour of safe drive-away time before dynamic calibration driving.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
OEM-compliant setup prevents ADAS calibration failures on a Gmc Yukon XL Denali. Measure level across the working footprint, including where targets will stand, and keep the area clean so stands do not settle. Set the vehicle reference by establishing centerline and thrust line, centering the steering wheel, and keeping the vehicle straight. Verify OEM-specified space so targets can be positioned at exact distances, offsets, and heights. Stabilize the environment. Avoid sunlight, windshield glare, flicker, deep shadows, rain, dust, and bay traffic that changes lighting. Select the correct OEM targets for the system being calibrated (camera, radar, surround-view) and inspect boards for fading, creases, or contamination. Confirm stands and measurement tools are accurate and locked down. Verify scan tool coverage for the Gmc Yukon XL Denali, select the correct routine for year and trim, and record tool and software versions on the work order. Maintain voltage with a battery maintainer. Follow OEM no-touch requirements during static routines: keep doors closed, avoid leaning on the vehicle, and do not enter the cabin unless directed. These disciplines deliver repeatable results and fewer comebacks at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Gmc Yukon XL Denali
For a Gmc Yukon XL Denali, verification links completion to performance. Start with a post-repair scan as soon as the routine ends. Review camera and radar module status, clear any setup codes, and re-scan to confirm no DTCs remain current or pending. Failed-attempt or communication codes may not illuminate the dash, yet OEM and insurer processes often expect documented post-scan proof. Perform any OEM-directed road validation. If dynamic calibration is required, meet the conditions for roadway type, lane-marking quality, speed band, and minimum duration, and avoid weather or lighting restrictions that invalidate learning. Use a route with consistent lane lines and safe traffic flow. Confirm lane keeping and lane departure behave predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false warn. Validate blind spot and rear cross-traffic alerts where equipped. After windshield work on a Gmc Yukon XL Denali, allow cure time before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and the adhesive needs at least one hour of safe drive-away time before dynamic driving. Finish by confirming the cluster is clear. If warnings persist, recheck alignment, tire spec, ride height, sensor mounting, and glass fitment, then follow the OEM troubleshooting and recalibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Gmc Yukon XL Denali
Closeout records protect the driver and the claim after ADAS work on a Gmc Yukon XL Denali. Build a packet that can be reviewed later without context. Include the scan tool calibration report with VIN, date/time, routine identification, calibrated modules, and pass or fail outcome. Attach pre-scan and post-scan reports to document DTC status before and after service. Document prerequisites and setup with photos of sensor mounting points and the windshield or camera bracket area, plus images showing target placement when static calibration was performed. Include required measurements or alignment printouts. If the Gmc Yukon XL Denali required dynamic calibration or validation driving, record the OEM routine name, conditions met (speed band, duration), and confirmation that no ADAS warnings were present at completion. Log scan tool platform, software version, target or fixture set used, and battery maintainer usage for compliance and reimbursement. Provide the customer a copy with the invoice and guidance if a warning returns. Bang AutoGlass accepts all insurance companies when comprehensive coverage applies, and thorough documentation reduces back-and-forth while supporting our lifetime workmanship warranty. Retain the packet per policy for each Gmc Yukon XL Denali.
Services
Service Areas
ADAS Calibration Checklist for Gmc Yukon XL Denali: Documentation, Verification, and Final Safety Checks
Identify Gmc Yukon XL Denali ADAS Systems and OEM Calibration Triggers
Calibrating ADAS on a Gmc Yukon XL Denali starts by confirming which driver-assist features are installed and which OEM events require calibration. Decode the VIN and verify trim and option packages, then run a full diagnostic scan that lists ADAS modules and sensor configurations. Common components include a windshield forward camera for lane functions, front radar for adaptive cruise and emergency braking, rear corner radar for blind spot monitoring, and park-assist ultrasonics or surround-view cameras. If the equipment list is unclear, verify it in OEM service information so no static or dynamic routine is missed. Next, match the repair to the OEM trigger list. Windshield replacement on a Gmc Yukon XL Denali with a bonded camera bracket often requires camera calibration because glass fit, bracket position, or camera R&I can change aim. Other triggers include sensor R&I, bracket repairs, module replacement or programming, wheel alignment, tire-size or ride-height changes, and DTCs indicating an adaptation or basic setting is needed. The checklist goal is to map each Gmc Yukon XL Denali system to the exact OEM workflow, then verify results so safety features operate as designed.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Pre-calibration documentation makes ADAS work on a Gmc Yukon XL Denali verifiable, insurer-ready, and aligned to OEM guidance. Start with a pre-repair diagnostic scan to capture the DTC baseline across camera and radar modules, ABS/ESC, steering angle, and related body or gateway systems. Then plan for a post-scan to confirm all modules return to normal status after repair. Build a clear narrative that connects the baseline to the calibration trigger. Record the customer concern, VIN, and mileage, then document the work performed: windshield replacement on a Gmc Yukon XL Denali with a camera bracket, camera or radar removal and installation, bumper/grille repairs near the radar, alignment or suspension changes, module replacement, or software updates. Add photos of the windshield, camera bracket, and sensor mounts, plus any damage or aftermarket parts that could affect aim. Package the evidence for review: save the full pre-scan report (current, pending, and history codes when available), freeze-frame data, and scan tool platform/software version, and note whether the OEM calls for static, dynamic, or combined calibration. Bang AutoGlass works with all carriers when comprehensive coverage applies, and complete documentation helps reduce claim delays and supports our lifetime workmanship warranty.
Vehicle Readiness Checklist for Gmc Yukon XL Denali: Tires, Alignment, Ride Height, and Sensor/Glass Prep
A reliable calibration depends on vehicle readiness. For a Gmc Yukon XL Denali, confirm tires are OEM-approved, matched side-to-side, evenly worn, and inflated to spec. Wrong tire size, low pressure, or uneven tread changes rolling radius and steering calculations and can distort lane keeping and adaptive cruise behavior. Verify wheel alignment is within OEM specifications before calibrating; toe, thrust angle, and steering angle sensor values influence how cameras and radar interpret the lane. Next, confirm ride height and loading. Remove heavy cargo, keep the spare tire in place, and maintain normal operating weight; many OEM procedures also specify a minimum fuel level. Aftermarket lifts/levels, non-OEM wheel packages, damaged springs, or unresolved collision damage are common go/no-go issues because they change sensor geometry. Finish with sensor and glass preparation. If the Gmc Yukon XL Denali uses a windshield-mounted camera, inspect the bracket, verify the correct windshield and attachments, and keep the camera view area clean and dry with no stickers, haze, tint artifacts, or residue. Confirm wiper and cowl fitment, ensure radar sensors are seated and unobstructed, and remove anything that blocks sightlines. At Bang AutoGlass, windshield replacement typically takes 30-45 minutes; allow at least one hour of safe drive-away time before dynamic calibration driving.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
OEM-compliant setup prevents ADAS calibration failures on a Gmc Yukon XL Denali. Measure level across the working footprint, including where targets will stand, and keep the area clean so stands do not settle. Set the vehicle reference by establishing centerline and thrust line, centering the steering wheel, and keeping the vehicle straight. Verify OEM-specified space so targets can be positioned at exact distances, offsets, and heights. Stabilize the environment. Avoid sunlight, windshield glare, flicker, deep shadows, rain, dust, and bay traffic that changes lighting. Select the correct OEM targets for the system being calibrated (camera, radar, surround-view) and inspect boards for fading, creases, or contamination. Confirm stands and measurement tools are accurate and locked down. Verify scan tool coverage for the Gmc Yukon XL Denali, select the correct routine for year and trim, and record tool and software versions on the work order. Maintain voltage with a battery maintainer. Follow OEM no-touch requirements during static routines: keep doors closed, avoid leaning on the vehicle, and do not enter the cabin unless directed. These disciplines deliver repeatable results and fewer comebacks at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Gmc Yukon XL Denali
For a Gmc Yukon XL Denali, verification links completion to performance. Start with a post-repair scan as soon as the routine ends. Review camera and radar module status, clear any setup codes, and re-scan to confirm no DTCs remain current or pending. Failed-attempt or communication codes may not illuminate the dash, yet OEM and insurer processes often expect documented post-scan proof. Perform any OEM-directed road validation. If dynamic calibration is required, meet the conditions for roadway type, lane-marking quality, speed band, and minimum duration, and avoid weather or lighting restrictions that invalidate learning. Use a route with consistent lane lines and safe traffic flow. Confirm lane keeping and lane departure behave predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false warn. Validate blind spot and rear cross-traffic alerts where equipped. After windshield work on a Gmc Yukon XL Denali, allow cure time before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and the adhesive needs at least one hour of safe drive-away time before dynamic driving. Finish by confirming the cluster is clear. If warnings persist, recheck alignment, tire spec, ride height, sensor mounting, and glass fitment, then follow the OEM troubleshooting and recalibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Gmc Yukon XL Denali
Closeout records protect the driver and the claim after ADAS work on a Gmc Yukon XL Denali. Build a packet that can be reviewed later without context. Include the scan tool calibration report with VIN, date/time, routine identification, calibrated modules, and pass or fail outcome. Attach pre-scan and post-scan reports to document DTC status before and after service. Document prerequisites and setup with photos of sensor mounting points and the windshield or camera bracket area, plus images showing target placement when static calibration was performed. Include required measurements or alignment printouts. If the Gmc Yukon XL Denali required dynamic calibration or validation driving, record the OEM routine name, conditions met (speed band, duration), and confirmation that no ADAS warnings were present at completion. Log scan tool platform, software version, target or fixture set used, and battery maintainer usage for compliance and reimbursement. Provide the customer a copy with the invoice and guidance if a warning returns. Bang AutoGlass accepts all insurance companies when comprehensive coverage applies, and thorough documentation reduces back-and-forth while supporting our lifetime workmanship warranty. Retain the packet per policy for each Gmc Yukon XL Denali.
Enjoy More Relevant Blogs
Tempered vs Laminated Door Glass on Dodge Ram 2500 Regular Cab: What’s Used and Why It Matters
Tempered vs laminated door glass on Dodge Ram 2500 Regular Cab: what your vehicle uses, how it breaks, and what it means for replacement safety, cost, and cleanup.
How to Schedule ADAS Calibration for Ford F250 Super Duty Crew Cab After Windshield Replacement
Schedule ADAS calibration for Ford F250 Super Duty Crew Cab after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
After a Break-In: Dodge Challenger Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Dodge Challenger, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Will Insurance Cover Door Glass Replacement for a Ford Focus RS? Claims Steps, Deductibles, and What to Document
Will insurance cover Ford Focus RS door glass replacement? Learn claim steps, deductibles, photos to document, and how to schedule fast repairs today.
ADAS After Windshield Replacement on Gmc Terrain: Calibration Basics and Safety Checks
ADAS after Gmc Terrain windshield replacement: calibration basics, common safety checks, and how to confirm cameras and sensors are working correctly.
How to Schedule Mobile Rear Glass Replacement for Gmc Rally Wagon 2500
Schedule mobile rear glass replacement for your Gmc Rally Wagon 2500 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Stop Leaks and Wind Noise: What Proper Dodge Durango Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Dodge Durango quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Tempered Safety Rear Glass Replacement for Gmc Canyon Crew Cab: Understanding DOT Markings and FMVSS 205
Need Gmc Canyon Crew Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Post-Install Checks for Gmc Sierra (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Gmc Sierra (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Fast Scheduling Guide: Gmc Sierra 3500 Hd Extended Cab Windshield Replacement From Booking to Install
Book Gmc Sierra 3500 Hd Extended Cab windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm