Services
Service Areas
How Long Does Rear Glass Replacement Take on Mazda Mazdaspeed6? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Mazda Mazdaspeed6 Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
A Mazda Mazdaspeed6 rear glass replacement often seems to take longer than expected because the clock includes more than the swap itself. Even if a traditional shop can replace the back glass in 1–3 hours of labor, the overall timeline can grow due to part availability, paperwork, drop-off logistics, and the time required after installation before the vehicle should be driven. Technicians remove the damaged rear windshield/back glass, vacuum and clear fragments, prep the bonding surface, and then set the new rear window in fresh urethane with precise alignment so the seal is even. Bang AutoGlass makes the process easier by bringing mobile auto glass service to you. For most Mazda Mazdaspeed6 rear window replacements, the hands-on work typically takes about 30–45 minutes. We then ask you to keep the vehicle parked for at least 1 hour so the urethane reaches a conservative safe drive-away baseline. Many customers schedule the service like an extended meeting, not an all-day errand. If you’re using insurance, rear glass replacement is usually processed under comprehensive coverage, and we can work with any carrier that provides it. Our lifetime workmanship warranty backs the installation for long-term peace of mind.
Mazda Mazdaspeed6 Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
A Mazda Mazdaspeed6 rear glass replacement is fast only when the technician follows a disciplined process. We begin by protecting the interior and gaining access: trim, moldings, and any fasteners are removed, and defroster or antenna connections to the back glass are identified and disconnected. If the window broke, we remove loose shards and vacuum the rear deck/cargo area and vents to limit leftover glass chips. The critical step is pinch-weld preparation. Old urethane is trimmed to the correct height, the surface is cleaned and decontaminated, and any corrosion is treated so the new bead bonds evenly. When the adhesive system calls for it, primer/activator is applied to improve adhesion and reduce rust risk. Fresh automotive urethane is applied in a continuous bead, then the new rear windshield/back glass is set and aligned so the perimeter seats uniformly. Final work includes reinstalling moldings, reconnecting the defroster, using retention tape if required, and inspecting for obvious gaps that can cause leaks or wind noise. At Bang AutoGlass, most Mazda Mazdaspeed6 back glass installs take about 30–45 minutes of hands-on work, followed by the required stationary set time before you drive.
Urethane Cure Time for Mazda Mazdaspeed6 Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Mazda Mazdaspeed6 back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Mazda Mazdaspeed6 rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Mazda Mazdaspeed6 Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Rear glass replacement cure time on a Mazda Mazdaspeed6 depends on how fast the urethane adhesive can reach Minimum/Safe Drive-Away Time (MDAT/SDAT). Those times vary by adhesive formula and by conditions during service—especially ambient temperature and relative humidity. In colder weather, moisture-cure polyurethane typically reacts more slowly, so the bond takes longer to build early strength. Very dry air can also slow curing because many urethanes rely on moisture in the air. Heat usually speeds cure, but extreme heat can shorten open/working time, giving the technician less time to seat the Mazda Mazdaspeed6 back glass before the bead skins over. Adhesive choice matters: fast-cure and advanced-cure urethanes are designed to hit MDAT sooner within specific ranges, and specialized systems may be selected for very low temperatures. Vehicle design plays a role too. Larger rear windshields/back glass on SUVs and hatchbacks have longer bead paths and more leverage, so correct bead height, proper primers, and clean pinch-weld prep are critical for a consistent seal. Bang AutoGlass plans materials and process around real on-site conditions for your Mazda Mazdaspeed6, then provides a clear drive-away recommendation you can follow.
When Is It Safe to Drive After Mazda Mazdaspeed6 Rear Glass Replacement? Practical Drive-Away Rules
The safest answer to “when can I drive?” after a Mazda Mazdaspeed6 rear window replacement is: when the urethane has reached MDAT/SDAT for the product and conditions used. MDAT (Minimum Drive-Away Time) and SDAT (Safe Drive-Away Time) describe the minimum stationary window needed for the bond to handle normal driving forces. Because cure speed changes with temperature, humidity, and adhesive formula, timing should come from the urethane manufacturer’s specifications—not a generic estimate. Fast-cure urethanes may allow earlier drive-away in ideal ranges, but cold or very dry weather often extends the time needed to hit the same safety threshold; extreme heat can also alter working time. Practical rule: protect the install during its most vulnerable period. Bang AutoGlass requires at least 1 hour with your Mazda Mazdaspeed6 parked after the back glass is set before driving—no moving it around and no short trips. After you start driving, keep it gentle the rest of the day: avoid rough roads, don’t slam doors or the liftgate, and postpone high-speed driving while the bond continues to mature. If insurance applies, rear glass replacement is typically a comprehensive claim, and our lifetime workmanship warranty supports the install long after service.
Mazda Mazdaspeed6 Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
The best aftercare for a Mazda Mazdaspeed6 rear window replacement is to minimize stress on the glass while the urethane finishes curing. Begin by following the drive-away time provided; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is present, leave it in place—tape helps stabilize the rear windshield/back glass and keep moldings seated as the adhesive sets. Many jobs do well with roughly 24 hours of tape, and up to 48 hours in some situations. For the first 1–2 days, skip automated car washes, power washers, and anything that directs pressurized water at the window edge. Also avoid abrupt cabin-pressure changes: close doors softly, don’t slam the liftgate, and avoid blasting HVAC at the glass perimeter. If you can, steer clear of uneven construction roads on day one, since body twist and vibration can load the new glass before the bond is fully mature. After your first drive or first rain, do a quick inspection for dampness, wind noise, or moisture around trim and the cargo area, and report concerns promptly. Protect the rear defroster grid by cleaning with a soft cloth and mild, non-abrasive cleaner—no scraping or harsh chemicals.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Mazda Mazdaspeed6? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Mazda Mazdaspeed6 Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
A Mazda Mazdaspeed6 rear glass replacement often seems to take longer than expected because the clock includes more than the swap itself. Even if a traditional shop can replace the back glass in 1–3 hours of labor, the overall timeline can grow due to part availability, paperwork, drop-off logistics, and the time required after installation before the vehicle should be driven. Technicians remove the damaged rear windshield/back glass, vacuum and clear fragments, prep the bonding surface, and then set the new rear window in fresh urethane with precise alignment so the seal is even. Bang AutoGlass makes the process easier by bringing mobile auto glass service to you. For most Mazda Mazdaspeed6 rear window replacements, the hands-on work typically takes about 30–45 minutes. We then ask you to keep the vehicle parked for at least 1 hour so the urethane reaches a conservative safe drive-away baseline. Many customers schedule the service like an extended meeting, not an all-day errand. If you’re using insurance, rear glass replacement is usually processed under comprehensive coverage, and we can work with any carrier that provides it. Our lifetime workmanship warranty backs the installation for long-term peace of mind.
Mazda Mazdaspeed6 Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
A Mazda Mazdaspeed6 rear glass replacement is fast only when the technician follows a disciplined process. We begin by protecting the interior and gaining access: trim, moldings, and any fasteners are removed, and defroster or antenna connections to the back glass are identified and disconnected. If the window broke, we remove loose shards and vacuum the rear deck/cargo area and vents to limit leftover glass chips. The critical step is pinch-weld preparation. Old urethane is trimmed to the correct height, the surface is cleaned and decontaminated, and any corrosion is treated so the new bead bonds evenly. When the adhesive system calls for it, primer/activator is applied to improve adhesion and reduce rust risk. Fresh automotive urethane is applied in a continuous bead, then the new rear windshield/back glass is set and aligned so the perimeter seats uniformly. Final work includes reinstalling moldings, reconnecting the defroster, using retention tape if required, and inspecting for obvious gaps that can cause leaks or wind noise. At Bang AutoGlass, most Mazda Mazdaspeed6 back glass installs take about 30–45 minutes of hands-on work, followed by the required stationary set time before you drive.
Urethane Cure Time for Mazda Mazdaspeed6 Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Mazda Mazdaspeed6 back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Mazda Mazdaspeed6 rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Mazda Mazdaspeed6 Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Rear glass replacement cure time on a Mazda Mazdaspeed6 depends on how fast the urethane adhesive can reach Minimum/Safe Drive-Away Time (MDAT/SDAT). Those times vary by adhesive formula and by conditions during service—especially ambient temperature and relative humidity. In colder weather, moisture-cure polyurethane typically reacts more slowly, so the bond takes longer to build early strength. Very dry air can also slow curing because many urethanes rely on moisture in the air. Heat usually speeds cure, but extreme heat can shorten open/working time, giving the technician less time to seat the Mazda Mazdaspeed6 back glass before the bead skins over. Adhesive choice matters: fast-cure and advanced-cure urethanes are designed to hit MDAT sooner within specific ranges, and specialized systems may be selected for very low temperatures. Vehicle design plays a role too. Larger rear windshields/back glass on SUVs and hatchbacks have longer bead paths and more leverage, so correct bead height, proper primers, and clean pinch-weld prep are critical for a consistent seal. Bang AutoGlass plans materials and process around real on-site conditions for your Mazda Mazdaspeed6, then provides a clear drive-away recommendation you can follow.
When Is It Safe to Drive After Mazda Mazdaspeed6 Rear Glass Replacement? Practical Drive-Away Rules
The safest answer to “when can I drive?” after a Mazda Mazdaspeed6 rear window replacement is: when the urethane has reached MDAT/SDAT for the product and conditions used. MDAT (Minimum Drive-Away Time) and SDAT (Safe Drive-Away Time) describe the minimum stationary window needed for the bond to handle normal driving forces. Because cure speed changes with temperature, humidity, and adhesive formula, timing should come from the urethane manufacturer’s specifications—not a generic estimate. Fast-cure urethanes may allow earlier drive-away in ideal ranges, but cold or very dry weather often extends the time needed to hit the same safety threshold; extreme heat can also alter working time. Practical rule: protect the install during its most vulnerable period. Bang AutoGlass requires at least 1 hour with your Mazda Mazdaspeed6 parked after the back glass is set before driving—no moving it around and no short trips. After you start driving, keep it gentle the rest of the day: avoid rough roads, don’t slam doors or the liftgate, and postpone high-speed driving while the bond continues to mature. If insurance applies, rear glass replacement is typically a comprehensive claim, and our lifetime workmanship warranty supports the install long after service.
Mazda Mazdaspeed6 Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
The best aftercare for a Mazda Mazdaspeed6 rear window replacement is to minimize stress on the glass while the urethane finishes curing. Begin by following the drive-away time provided; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is present, leave it in place—tape helps stabilize the rear windshield/back glass and keep moldings seated as the adhesive sets. Many jobs do well with roughly 24 hours of tape, and up to 48 hours in some situations. For the first 1–2 days, skip automated car washes, power washers, and anything that directs pressurized water at the window edge. Also avoid abrupt cabin-pressure changes: close doors softly, don’t slam the liftgate, and avoid blasting HVAC at the glass perimeter. If you can, steer clear of uneven construction roads on day one, since body twist and vibration can load the new glass before the bond is fully mature. After your first drive or first rain, do a quick inspection for dampness, wind noise, or moisture around trim and the cargo area, and report concerns promptly. Protect the rear defroster grid by cleaning with a soft cloth and mild, non-abrasive cleaner—no scraping or harsh chemicals.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Mazda Mazdaspeed6? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Mazda Mazdaspeed6 Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
A Mazda Mazdaspeed6 rear glass replacement often seems to take longer than expected because the clock includes more than the swap itself. Even if a traditional shop can replace the back glass in 1–3 hours of labor, the overall timeline can grow due to part availability, paperwork, drop-off logistics, and the time required after installation before the vehicle should be driven. Technicians remove the damaged rear windshield/back glass, vacuum and clear fragments, prep the bonding surface, and then set the new rear window in fresh urethane with precise alignment so the seal is even. Bang AutoGlass makes the process easier by bringing mobile auto glass service to you. For most Mazda Mazdaspeed6 rear window replacements, the hands-on work typically takes about 30–45 minutes. We then ask you to keep the vehicle parked for at least 1 hour so the urethane reaches a conservative safe drive-away baseline. Many customers schedule the service like an extended meeting, not an all-day errand. If you’re using insurance, rear glass replacement is usually processed under comprehensive coverage, and we can work with any carrier that provides it. Our lifetime workmanship warranty backs the installation for long-term peace of mind.
Mazda Mazdaspeed6 Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
A Mazda Mazdaspeed6 rear glass replacement is fast only when the technician follows a disciplined process. We begin by protecting the interior and gaining access: trim, moldings, and any fasteners are removed, and defroster or antenna connections to the back glass are identified and disconnected. If the window broke, we remove loose shards and vacuum the rear deck/cargo area and vents to limit leftover glass chips. The critical step is pinch-weld preparation. Old urethane is trimmed to the correct height, the surface is cleaned and decontaminated, and any corrosion is treated so the new bead bonds evenly. When the adhesive system calls for it, primer/activator is applied to improve adhesion and reduce rust risk. Fresh automotive urethane is applied in a continuous bead, then the new rear windshield/back glass is set and aligned so the perimeter seats uniformly. Final work includes reinstalling moldings, reconnecting the defroster, using retention tape if required, and inspecting for obvious gaps that can cause leaks or wind noise. At Bang AutoGlass, most Mazda Mazdaspeed6 back glass installs take about 30–45 minutes of hands-on work, followed by the required stationary set time before you drive.
Urethane Cure Time for Mazda Mazdaspeed6 Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Mazda Mazdaspeed6 back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Mazda Mazdaspeed6 rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Mazda Mazdaspeed6 Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Rear glass replacement cure time on a Mazda Mazdaspeed6 depends on how fast the urethane adhesive can reach Minimum/Safe Drive-Away Time (MDAT/SDAT). Those times vary by adhesive formula and by conditions during service—especially ambient temperature and relative humidity. In colder weather, moisture-cure polyurethane typically reacts more slowly, so the bond takes longer to build early strength. Very dry air can also slow curing because many urethanes rely on moisture in the air. Heat usually speeds cure, but extreme heat can shorten open/working time, giving the technician less time to seat the Mazda Mazdaspeed6 back glass before the bead skins over. Adhesive choice matters: fast-cure and advanced-cure urethanes are designed to hit MDAT sooner within specific ranges, and specialized systems may be selected for very low temperatures. Vehicle design plays a role too. Larger rear windshields/back glass on SUVs and hatchbacks have longer bead paths and more leverage, so correct bead height, proper primers, and clean pinch-weld prep are critical for a consistent seal. Bang AutoGlass plans materials and process around real on-site conditions for your Mazda Mazdaspeed6, then provides a clear drive-away recommendation you can follow.
When Is It Safe to Drive After Mazda Mazdaspeed6 Rear Glass Replacement? Practical Drive-Away Rules
The safest answer to “when can I drive?” after a Mazda Mazdaspeed6 rear window replacement is: when the urethane has reached MDAT/SDAT for the product and conditions used. MDAT (Minimum Drive-Away Time) and SDAT (Safe Drive-Away Time) describe the minimum stationary window needed for the bond to handle normal driving forces. Because cure speed changes with temperature, humidity, and adhesive formula, timing should come from the urethane manufacturer’s specifications—not a generic estimate. Fast-cure urethanes may allow earlier drive-away in ideal ranges, but cold or very dry weather often extends the time needed to hit the same safety threshold; extreme heat can also alter working time. Practical rule: protect the install during its most vulnerable period. Bang AutoGlass requires at least 1 hour with your Mazda Mazdaspeed6 parked after the back glass is set before driving—no moving it around and no short trips. After you start driving, keep it gentle the rest of the day: avoid rough roads, don’t slam doors or the liftgate, and postpone high-speed driving while the bond continues to mature. If insurance applies, rear glass replacement is typically a comprehensive claim, and our lifetime workmanship warranty supports the install long after service.
Mazda Mazdaspeed6 Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
The best aftercare for a Mazda Mazdaspeed6 rear window replacement is to minimize stress on the glass while the urethane finishes curing. Begin by following the drive-away time provided; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is present, leave it in place—tape helps stabilize the rear windshield/back glass and keep moldings seated as the adhesive sets. Many jobs do well with roughly 24 hours of tape, and up to 48 hours in some situations. For the first 1–2 days, skip automated car washes, power washers, and anything that directs pressurized water at the window edge. Also avoid abrupt cabin-pressure changes: close doors softly, don’t slam the liftgate, and avoid blasting HVAC at the glass perimeter. If you can, steer clear of uneven construction roads on day one, since body twist and vibration can load the new glass before the bond is fully mature. After your first drive or first rain, do a quick inspection for dampness, wind noise, or moisture around trim and the cargo area, and report concerns promptly. Protect the rear defroster grid by cleaning with a soft cloth and mild, non-abrasive cleaner—no scraping or harsh chemicals.
Enjoy More Relevant Blogs
Shattered Back Window on Mazda Mazdaspeed6: A Step-by-Step Rear Glass Replacement Plan
Shattered back window on Mazda Mazdaspeed6? Follow a step-by-step rear glass replacement plan, cleanup tips, defroster notes, cure time, and drive-away rules.
Back Glass Replacement on Mazda Mazdaspeed6: Defroster Tabs, Antenna Lines, and Connector Reattachment Basics
Back glass replacement on Mazda Mazdaspeed6: defroster tabs, antenna lines, and connectors explained, plus install tips to avoid damage and rework safely.
Tempered Safety Rear Glass Replacement for Mazda Mazdaspeed6: Understanding DOT Markings and FMVSS 205
Need Mazda Mazdaspeed6 rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
OEM-Quality Rear Glass Replacement for Mazda Mazdaspeed6: Defroster Grid and Tint-Match Checklist
OEM-quality rear glass replacement for Mazda Mazdaspeed6: defroster grid and tint-match checklist, plus install tips to avoid callbacks—schedule service.
Post-Install Checks for Mazda Mazdaspeed6: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Mazda Mazdaspeed6: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Rear Glass Replacement for Mazda Mazdaspeed6: What to Expect During Install and Aftercare
Rear glass replacement for Mazda Mazdaspeed6: what happens during install, defroster and tint considerations, cure time, and aftercare to prevent leaks long-term.
Rear Defroster Not Working on Mazda Mazdaspeed6? When Rear Glass Replacement Makes More Sense Than Repair
Rear defroster not working on your Mazda Mazdaspeed6? Learn common causes, when repair fails, and when rear glass replacement is the smarter fix for winter.
How Much Does Rear Glass Replacement Cost for Mazda Mazdaspeed6? Pricing Factors, OEM vs Aftermarket, and Insurance Deductibles
Estimate Mazda Mazdaspeed6 rear glass replacement cost. Compare OEM vs aftermarket, labor factors, insurance deductibles, and ways to save. Request a quote.
How to Schedule Mobile Rear Glass Replacement for Mazda Mazdaspeed6
Schedule mobile rear glass replacement for your Mazda Mazdaspeed6 in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm