Services
Service Areas
Urethane Bonding for Mercedes-Benz 300 Sd Sunroof Glass Replacement: Why Adhesive Quality Matters
What Urethane Does in Mercedes-Benz 300 Sd Sunroof Glass Replacement: Sealing, Strength, and Vibration Control
In a Mercedes-Benz 300 Sd, the urethane bond is what makes a sunroof glass replacement behave like a factory roof component, not an add-on. Automotive urethane is a direct-glazing polyurethane adhesive engineered to seal, retain, and dampen vibration in one system. When the bead is applied evenly and compressed correctly, it forms a continuous perimeter barrier that blocks water paths that can stain the headliner, damage trim, and create lingering odors. Once cured, urethane provides high retention strength while staying flexible, so the glass remains positioned as the body flexes and the roof opening moves through temperature swings. That elasticity also reduces NVH, helping prevent squeaks, rattles, and wind whistle when the glass is seated flush and evenly supported. Bang AutoGlass follows OEM-style bonding practices for Mercedes-Benz 300 Sd sunroof glass replacement so the roof system stays sealed and quiet over time. We bring mobile service to your home or workplace, often with next-day availability. Most replacements take about 30 to 45 minutes onsite, and we recommend at least one hour of adhesive set time before safe drive-away. Every replacement is backed by our lifetime workmanship warranty.
Choosing Adhesive Quality: Direct-Glazing Formulas, Crash-Test Performance, and Freshness Controls
For long-term results, the adhesive system matters as much as the glass in a Mercedes-Benz 300 Sd sunroof glass replacement. Direct-glazing urethanes are moisture-cure polyurethanes formulated to bond stationary automotive glass, and different products are tuned for different targets. Some emphasize bead stability to support a flush fit, others provide longer open time for precise placement, and others develop early handling strength faster under specific temperature and humidity conditions. Those differences show up as real-world performance: leak resistance, wind-noise control, and retention through vibration and thermal cycling. Quality also depends on verification and process control. Professional technicians follow the product data sheet for surface preparation, approved cleaners, primer or activator compatibility, flash times, and safe drive-away guidance. Freshness is essential because urethane has a shelf life; degraded inventory or improper storage can change cure behavior and reduce adhesion, raising the odds of edge separation or future water tracking. At Bang AutoGlass, we manage inventory carefully, confirm expiration dates, and record cartridge lot information for traceability on every Mercedes-Benz 300 Sd installation. If you are filing a claim, we work with all comprehensive insurance carriers and can often schedule mobile service as soon as next day.
Surface Prep That Makes the Bond: Cleaning, Pinchweld Protection, and Primer/Activator Steps
A durable urethane bond starts with disciplined preparation, because contamination and damaged bonding surfaces are common causes of leaks, wind whistle, and premature edge failure. On a Mercedes-Benz 300 Sd sunroof glass replacement, we safeguard the cabin, remove the broken glass, and clean meticulously so chips do not end up in tracks, drain channels, or the perimeter bonding area. Next, we inspect the roof pinchweld and bonding channel. Instead of scraping to bare metal, we typically trim the existing urethane to an even, stable base; that uniform foundation improves bead control and helps maintain the correct glass height. If paint is compromised or metal is exposed, we treat it promptly to prevent corrosion from creeping under the new bond line. After the surfaces are sound, we complete chemical prep with approved cleaners and lint-free wipes, and we avoid touching prepped zones. Based on the urethane system, we apply the correct activator and or primer to the glass frit and required body areas and allow the manufacturer's flash time. Before final set, we verify alignment so the new Mercedes-Benz 300 Sd sunroof glass seats flush and compresses evenly around the perimeter. This workflow supports leak prevention and the lifetime workmanship warranty we provide.
Bead Design and Application for Mercedes-Benz 300 Sd: Open Time, Bead Height, and Proper Tooling
Bead design determines whether a Mercedes-Benz 300 Sd sunroof glass replacement behaves like an OEM install or becomes a leak and wind-noise issue. The urethane bead must be continuous and matched to the factory footprint so it can seal water out, hold the glass at the correct height, and absorb vibration. Timing is critical: once urethane is dispensed it begins to skin, and setting the glass outside the adhesive open time can reduce wet-out and adhesion. At Bang AutoGlass, we stage the job so dry-fit checks, alignment points, and trim interfaces are confirmed before dispensing. Then we lay the bead and set the glass promptly and squarely. Professional tooling matters: a high-thrust gun and a notched nozzle help create a stable V-bead that stays consistent through corners and transitions instead of slumping or thinning. Bead height is a balance. Too little height can leave thin spots and micro-gaps that become leaks; too much can prevent proper seating, cause excessive squeeze-out, or push moldings out of position. After placement, the glass is lowered in a controlled motion and pressed evenly-no rocking or smearing-so the bond line contacts uniformly without trapping air. The outcome is a sealed, flush Mercedes-Benz 300 Sd sunroof glass replacement built to resist water intrusion, wind whistle, and vibration over time.
Cure Time and Safe-Use Timing: Temperature/Humidity Effects and Minimum Drive-Away Guidance
Cure time is what allows urethane to develop the strength and elasticity that keeps your Mercedes-Benz 300 Sd sunroof glass sealed and secure. Most auto-glass urethanes are one-component, moisture-cure polyurethanes, so temperature and humidity directly affect how quickly handling strength builds: warm, moderately humid conditions typically speed cure, while cold weather or very dry air slows it. Because products vary, safe drive-away time should follow the adhesive's product data sheet-not guesswork. At Bang AutoGlass, most Mercedes-Benz 300 Sd sunroof glass replacements take about 30-45 minutes onsite, and we recommend a minimum one-hour set period before normal driving. In extreme weather (very cold mornings, high heat, or rapidly changing humidity), we may advise extra set time and will give job-specific guidance at the appointment. During the initial cure window, avoid slamming doors (pressure changes can stress a fresh bond), and skip automatic or high-pressure washes for at least 48 hours so water and airflow don't challenge the perimeter seal. If possible, park covered and avoid rough roads immediately after service to minimize vibration while the bond is still building strength. We're fully mobile, can often schedule as soon as next day, and we work with comprehensive insurance carriers.
Post-Bond Quality Checks on Mercedes-Benz 300 Sd: Leak Testing, Wind Noise, Flush Fit, and Documentation
After the urethane is applied and the glass is set, quality control confirms your Mercedes-Benz 300 Sd sunroof glass replacement will stay dry, quiet, and visually correct. We begin with alignment: the glass should sit flush with the roof surface, with even spacing and consistent perimeter compression. Small errors can create wind noise, stress the bond line, or open micro-gaps, so we check corners, transitions, and trim interfaces before the vehicle leaves. When conditions allow, we validate sealing performance with a controlled perimeter water check and look for any sign of moisture migration into the headliner, pillars, or interior trim. We also evaluate common non-bond contributors that mimic bonding failures-blocked drains, debris in channels, or damaged weather components-and call out anything we see so you're not chasing the wrong fix. For wind-noise prevention, we confirm continuous bead contact, clean edges, and moldings seated without distortion. To close out, Bang AutoGlass provides documentation and care guidance (safe drive-away timing, wash restrictions during early cure) plus warranty details. If insurance is involved, we can note claim information for your records, and our lifetime workmanship warranty backs the installation long after your Mercedes-Benz 300 Sd replacement.
Services
Service Areas
Urethane Bonding for Mercedes-Benz 300 Sd Sunroof Glass Replacement: Why Adhesive Quality Matters
What Urethane Does in Mercedes-Benz 300 Sd Sunroof Glass Replacement: Sealing, Strength, and Vibration Control
In a Mercedes-Benz 300 Sd, the urethane bond is what makes a sunroof glass replacement behave like a factory roof component, not an add-on. Automotive urethane is a direct-glazing polyurethane adhesive engineered to seal, retain, and dampen vibration in one system. When the bead is applied evenly and compressed correctly, it forms a continuous perimeter barrier that blocks water paths that can stain the headliner, damage trim, and create lingering odors. Once cured, urethane provides high retention strength while staying flexible, so the glass remains positioned as the body flexes and the roof opening moves through temperature swings. That elasticity also reduces NVH, helping prevent squeaks, rattles, and wind whistle when the glass is seated flush and evenly supported. Bang AutoGlass follows OEM-style bonding practices for Mercedes-Benz 300 Sd sunroof glass replacement so the roof system stays sealed and quiet over time. We bring mobile service to your home or workplace, often with next-day availability. Most replacements take about 30 to 45 minutes onsite, and we recommend at least one hour of adhesive set time before safe drive-away. Every replacement is backed by our lifetime workmanship warranty.
Choosing Adhesive Quality: Direct-Glazing Formulas, Crash-Test Performance, and Freshness Controls
For long-term results, the adhesive system matters as much as the glass in a Mercedes-Benz 300 Sd sunroof glass replacement. Direct-glazing urethanes are moisture-cure polyurethanes formulated to bond stationary automotive glass, and different products are tuned for different targets. Some emphasize bead stability to support a flush fit, others provide longer open time for precise placement, and others develop early handling strength faster under specific temperature and humidity conditions. Those differences show up as real-world performance: leak resistance, wind-noise control, and retention through vibration and thermal cycling. Quality also depends on verification and process control. Professional technicians follow the product data sheet for surface preparation, approved cleaners, primer or activator compatibility, flash times, and safe drive-away guidance. Freshness is essential because urethane has a shelf life; degraded inventory or improper storage can change cure behavior and reduce adhesion, raising the odds of edge separation or future water tracking. At Bang AutoGlass, we manage inventory carefully, confirm expiration dates, and record cartridge lot information for traceability on every Mercedes-Benz 300 Sd installation. If you are filing a claim, we work with all comprehensive insurance carriers and can often schedule mobile service as soon as next day.
Surface Prep That Makes the Bond: Cleaning, Pinchweld Protection, and Primer/Activator Steps
A durable urethane bond starts with disciplined preparation, because contamination and damaged bonding surfaces are common causes of leaks, wind whistle, and premature edge failure. On a Mercedes-Benz 300 Sd sunroof glass replacement, we safeguard the cabin, remove the broken glass, and clean meticulously so chips do not end up in tracks, drain channels, or the perimeter bonding area. Next, we inspect the roof pinchweld and bonding channel. Instead of scraping to bare metal, we typically trim the existing urethane to an even, stable base; that uniform foundation improves bead control and helps maintain the correct glass height. If paint is compromised or metal is exposed, we treat it promptly to prevent corrosion from creeping under the new bond line. After the surfaces are sound, we complete chemical prep with approved cleaners and lint-free wipes, and we avoid touching prepped zones. Based on the urethane system, we apply the correct activator and or primer to the glass frit and required body areas and allow the manufacturer's flash time. Before final set, we verify alignment so the new Mercedes-Benz 300 Sd sunroof glass seats flush and compresses evenly around the perimeter. This workflow supports leak prevention and the lifetime workmanship warranty we provide.
Bead Design and Application for Mercedes-Benz 300 Sd: Open Time, Bead Height, and Proper Tooling
Bead design determines whether a Mercedes-Benz 300 Sd sunroof glass replacement behaves like an OEM install or becomes a leak and wind-noise issue. The urethane bead must be continuous and matched to the factory footprint so it can seal water out, hold the glass at the correct height, and absorb vibration. Timing is critical: once urethane is dispensed it begins to skin, and setting the glass outside the adhesive open time can reduce wet-out and adhesion. At Bang AutoGlass, we stage the job so dry-fit checks, alignment points, and trim interfaces are confirmed before dispensing. Then we lay the bead and set the glass promptly and squarely. Professional tooling matters: a high-thrust gun and a notched nozzle help create a stable V-bead that stays consistent through corners and transitions instead of slumping or thinning. Bead height is a balance. Too little height can leave thin spots and micro-gaps that become leaks; too much can prevent proper seating, cause excessive squeeze-out, or push moldings out of position. After placement, the glass is lowered in a controlled motion and pressed evenly-no rocking or smearing-so the bond line contacts uniformly without trapping air. The outcome is a sealed, flush Mercedes-Benz 300 Sd sunroof glass replacement built to resist water intrusion, wind whistle, and vibration over time.
Cure Time and Safe-Use Timing: Temperature/Humidity Effects and Minimum Drive-Away Guidance
Cure time is what allows urethane to develop the strength and elasticity that keeps your Mercedes-Benz 300 Sd sunroof glass sealed and secure. Most auto-glass urethanes are one-component, moisture-cure polyurethanes, so temperature and humidity directly affect how quickly handling strength builds: warm, moderately humid conditions typically speed cure, while cold weather or very dry air slows it. Because products vary, safe drive-away time should follow the adhesive's product data sheet-not guesswork. At Bang AutoGlass, most Mercedes-Benz 300 Sd sunroof glass replacements take about 30-45 minutes onsite, and we recommend a minimum one-hour set period before normal driving. In extreme weather (very cold mornings, high heat, or rapidly changing humidity), we may advise extra set time and will give job-specific guidance at the appointment. During the initial cure window, avoid slamming doors (pressure changes can stress a fresh bond), and skip automatic or high-pressure washes for at least 48 hours so water and airflow don't challenge the perimeter seal. If possible, park covered and avoid rough roads immediately after service to minimize vibration while the bond is still building strength. We're fully mobile, can often schedule as soon as next day, and we work with comprehensive insurance carriers.
Post-Bond Quality Checks on Mercedes-Benz 300 Sd: Leak Testing, Wind Noise, Flush Fit, and Documentation
After the urethane is applied and the glass is set, quality control confirms your Mercedes-Benz 300 Sd sunroof glass replacement will stay dry, quiet, and visually correct. We begin with alignment: the glass should sit flush with the roof surface, with even spacing and consistent perimeter compression. Small errors can create wind noise, stress the bond line, or open micro-gaps, so we check corners, transitions, and trim interfaces before the vehicle leaves. When conditions allow, we validate sealing performance with a controlled perimeter water check and look for any sign of moisture migration into the headliner, pillars, or interior trim. We also evaluate common non-bond contributors that mimic bonding failures-blocked drains, debris in channels, or damaged weather components-and call out anything we see so you're not chasing the wrong fix. For wind-noise prevention, we confirm continuous bead contact, clean edges, and moldings seated without distortion. To close out, Bang AutoGlass provides documentation and care guidance (safe drive-away timing, wash restrictions during early cure) plus warranty details. If insurance is involved, we can note claim information for your records, and our lifetime workmanship warranty backs the installation long after your Mercedes-Benz 300 Sd replacement.
Services
Service Areas
Urethane Bonding for Mercedes-Benz 300 Sd Sunroof Glass Replacement: Why Adhesive Quality Matters
What Urethane Does in Mercedes-Benz 300 Sd Sunroof Glass Replacement: Sealing, Strength, and Vibration Control
In a Mercedes-Benz 300 Sd, the urethane bond is what makes a sunroof glass replacement behave like a factory roof component, not an add-on. Automotive urethane is a direct-glazing polyurethane adhesive engineered to seal, retain, and dampen vibration in one system. When the bead is applied evenly and compressed correctly, it forms a continuous perimeter barrier that blocks water paths that can stain the headliner, damage trim, and create lingering odors. Once cured, urethane provides high retention strength while staying flexible, so the glass remains positioned as the body flexes and the roof opening moves through temperature swings. That elasticity also reduces NVH, helping prevent squeaks, rattles, and wind whistle when the glass is seated flush and evenly supported. Bang AutoGlass follows OEM-style bonding practices for Mercedes-Benz 300 Sd sunroof glass replacement so the roof system stays sealed and quiet over time. We bring mobile service to your home or workplace, often with next-day availability. Most replacements take about 30 to 45 minutes onsite, and we recommend at least one hour of adhesive set time before safe drive-away. Every replacement is backed by our lifetime workmanship warranty.
Choosing Adhesive Quality: Direct-Glazing Formulas, Crash-Test Performance, and Freshness Controls
For long-term results, the adhesive system matters as much as the glass in a Mercedes-Benz 300 Sd sunroof glass replacement. Direct-glazing urethanes are moisture-cure polyurethanes formulated to bond stationary automotive glass, and different products are tuned for different targets. Some emphasize bead stability to support a flush fit, others provide longer open time for precise placement, and others develop early handling strength faster under specific temperature and humidity conditions. Those differences show up as real-world performance: leak resistance, wind-noise control, and retention through vibration and thermal cycling. Quality also depends on verification and process control. Professional technicians follow the product data sheet for surface preparation, approved cleaners, primer or activator compatibility, flash times, and safe drive-away guidance. Freshness is essential because urethane has a shelf life; degraded inventory or improper storage can change cure behavior and reduce adhesion, raising the odds of edge separation or future water tracking. At Bang AutoGlass, we manage inventory carefully, confirm expiration dates, and record cartridge lot information for traceability on every Mercedes-Benz 300 Sd installation. If you are filing a claim, we work with all comprehensive insurance carriers and can often schedule mobile service as soon as next day.
Surface Prep That Makes the Bond: Cleaning, Pinchweld Protection, and Primer/Activator Steps
A durable urethane bond starts with disciplined preparation, because contamination and damaged bonding surfaces are common causes of leaks, wind whistle, and premature edge failure. On a Mercedes-Benz 300 Sd sunroof glass replacement, we safeguard the cabin, remove the broken glass, and clean meticulously so chips do not end up in tracks, drain channels, or the perimeter bonding area. Next, we inspect the roof pinchweld and bonding channel. Instead of scraping to bare metal, we typically trim the existing urethane to an even, stable base; that uniform foundation improves bead control and helps maintain the correct glass height. If paint is compromised or metal is exposed, we treat it promptly to prevent corrosion from creeping under the new bond line. After the surfaces are sound, we complete chemical prep with approved cleaners and lint-free wipes, and we avoid touching prepped zones. Based on the urethane system, we apply the correct activator and or primer to the glass frit and required body areas and allow the manufacturer's flash time. Before final set, we verify alignment so the new Mercedes-Benz 300 Sd sunroof glass seats flush and compresses evenly around the perimeter. This workflow supports leak prevention and the lifetime workmanship warranty we provide.
Bead Design and Application for Mercedes-Benz 300 Sd: Open Time, Bead Height, and Proper Tooling
Bead design determines whether a Mercedes-Benz 300 Sd sunroof glass replacement behaves like an OEM install or becomes a leak and wind-noise issue. The urethane bead must be continuous and matched to the factory footprint so it can seal water out, hold the glass at the correct height, and absorb vibration. Timing is critical: once urethane is dispensed it begins to skin, and setting the glass outside the adhesive open time can reduce wet-out and adhesion. At Bang AutoGlass, we stage the job so dry-fit checks, alignment points, and trim interfaces are confirmed before dispensing. Then we lay the bead and set the glass promptly and squarely. Professional tooling matters: a high-thrust gun and a notched nozzle help create a stable V-bead that stays consistent through corners and transitions instead of slumping or thinning. Bead height is a balance. Too little height can leave thin spots and micro-gaps that become leaks; too much can prevent proper seating, cause excessive squeeze-out, or push moldings out of position. After placement, the glass is lowered in a controlled motion and pressed evenly-no rocking or smearing-so the bond line contacts uniformly without trapping air. The outcome is a sealed, flush Mercedes-Benz 300 Sd sunroof glass replacement built to resist water intrusion, wind whistle, and vibration over time.
Cure Time and Safe-Use Timing: Temperature/Humidity Effects and Minimum Drive-Away Guidance
Cure time is what allows urethane to develop the strength and elasticity that keeps your Mercedes-Benz 300 Sd sunroof glass sealed and secure. Most auto-glass urethanes are one-component, moisture-cure polyurethanes, so temperature and humidity directly affect how quickly handling strength builds: warm, moderately humid conditions typically speed cure, while cold weather or very dry air slows it. Because products vary, safe drive-away time should follow the adhesive's product data sheet-not guesswork. At Bang AutoGlass, most Mercedes-Benz 300 Sd sunroof glass replacements take about 30-45 minutes onsite, and we recommend a minimum one-hour set period before normal driving. In extreme weather (very cold mornings, high heat, or rapidly changing humidity), we may advise extra set time and will give job-specific guidance at the appointment. During the initial cure window, avoid slamming doors (pressure changes can stress a fresh bond), and skip automatic or high-pressure washes for at least 48 hours so water and airflow don't challenge the perimeter seal. If possible, park covered and avoid rough roads immediately after service to minimize vibration while the bond is still building strength. We're fully mobile, can often schedule as soon as next day, and we work with comprehensive insurance carriers.
Post-Bond Quality Checks on Mercedes-Benz 300 Sd: Leak Testing, Wind Noise, Flush Fit, and Documentation
After the urethane is applied and the glass is set, quality control confirms your Mercedes-Benz 300 Sd sunroof glass replacement will stay dry, quiet, and visually correct. We begin with alignment: the glass should sit flush with the roof surface, with even spacing and consistent perimeter compression. Small errors can create wind noise, stress the bond line, or open micro-gaps, so we check corners, transitions, and trim interfaces before the vehicle leaves. When conditions allow, we validate sealing performance with a controlled perimeter water check and look for any sign of moisture migration into the headliner, pillars, or interior trim. We also evaluate common non-bond contributors that mimic bonding failures-blocked drains, debris in channels, or damaged weather components-and call out anything we see so you're not chasing the wrong fix. For wind-noise prevention, we confirm continuous bead contact, clean edges, and moldings seated without distortion. To close out, Bang AutoGlass provides documentation and care guidance (safe drive-away timing, wash restrictions during early cure) plus warranty details. If insurance is involved, we can note claim information for your records, and our lifetime workmanship warranty backs the installation long after your Mercedes-Benz 300 Sd replacement.
Enjoy More Relevant Blogs
Wind Noise After Sunroof Glass Replacement on Mercedes-Benz 300 Sd: Seal, Fit, and Alignment Checklist
Wind noise after Mercedes-Benz 300 Sd sunroof glass replacement? Check seal fit, alignment, and hardware so the roof closes tight and stays quiet at speed daily.
Panoramic Sunroof Glass Replacement for Mercedes-Benz 300 Sd: Install Steps and Safe Drive-Away Timing
Panoramic sunroof glass replacement for Mercedes-Benz 300 Sd: walk through install steps, cure-time rules, and safe drive-away timing so you avoid leaks. Book now.
Will My Comprehensive Policy Cover Mercedes-Benz 300 Sd Sunroof Glass Replacement? Claim Steps, Photos to Take, and Deductible Basics
Will comprehensive insurance cover Mercedes-Benz 300 Sd sunroof glass replacement? See claim steps, photos to take, deductible basics, and tips before filing.
After Breakage: Mercedes-Benz 300 Sd Sunroof Glass Replacement Cleanup, Weather Protection, and Next Steps
After breakage on a Mercedes-Benz 300 Sd sunroof, follow safe cleanup steps, protect the interior from weather, and know what to expect with replacement next.
How to Schedule Mobile Sunroof Glass Replacement for Mercedes-Benz 300 Sd
Schedule mobile sunroof glass replacement for Mercedes-Benz 300 Sd: what info to share, photos to take, timing, and what to expect on-site—avoid delays today.
Sunroof Leak on Mercedes-Benz 300 Sd: Drain Fix vs Sunroof Glass Replacement Decision Guide
Sunroof leak on Mercedes-Benz 300 Sd? Compare drain fixes vs sunroof glass replacement, warning signs, and the best next step to stop water damage fast today.
Sunroof vs Moonroof on Mercedes-Benz 300 Sd: How to Order the Correct Roof Glass Replacement
Sunroof vs moonroof on Mercedes-Benz 300 Sd: learn the differences, how to confirm your roof type, and order the correct replacement glass to avoid fit and leaks.
How Much Does Mercedes-Benz 300 Sd Sunroof Glass Replacement Cost? OEM vs Aftermarket, Labor Factors, and Estimate Tips
Mercedes-Benz 300 Sd sunroof glass replacement cost: price drivers, OEM vs aftermarket options, labor factors, and tips for an accurate estimate—compare now.
OEM-Quality Sunroof Glass Replacement for Mercedes-Benz 300 Sd: DOT Markings and FMVSS 205 Explained
OEM-quality sunroof glass replacement for Mercedes-Benz 300 Sd: understand DOT markings and FMVSS 205, plus fit checks that help prevent leaks—get it done right.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm