Services
Service Areas
Urethane Bonding for Mercedes-Benz Amg C-Class Sunroof Glass Replacement: Why Adhesive Quality Matters
What Urethane Does in Mercedes-Benz Amg C-Class Sunroof Glass Replacement: Sealing, Strength, and Vibration Control
In a Mercedes-Benz Amg C-Class, the urethane bond is what makes a sunroof glass replacement behave like a factory roof component, not an add-on. Automotive urethane is a direct-glazing polyurethane adhesive engineered to seal, retain, and dampen vibration in one system. When the bead is applied evenly and compressed correctly, it forms a continuous perimeter barrier that blocks water paths that can stain the headliner, damage trim, and create lingering odors. Once cured, urethane provides high retention strength while staying flexible, so the glass remains positioned as the body flexes and the roof opening moves through temperature swings. That elasticity also reduces NVH, helping prevent squeaks, rattles, and wind whistle when the glass is seated flush and evenly supported. Bang AutoGlass follows OEM-style bonding practices for Mercedes-Benz Amg C-Class sunroof glass replacement so the roof system stays sealed and quiet over time. We bring mobile service to your home or workplace, often with next-day availability. Most replacements take about 30 to 45 minutes onsite, and we recommend at least one hour of adhesive set time before safe drive-away. Every replacement is backed by our lifetime workmanship warranty.
Choosing Adhesive Quality: Direct-Glazing Formulas, Crash-Test Performance, and Freshness Controls
Adhesive quality is the difference between a quick install and a Mercedes-Benz Amg C-Class sunroof glass replacement that remains dry, quiet, and securely retained. Urethane is a family of one-component, moisture-cure polyurethane formulas engineered for direct-glazing, and not every cartridge performs the same. Viscosity affects whether the bead holds its profile for proper glass height, open time controls the window to set the glass before wet-out drops, and cure behavior determines when safe handling strength develops. High-quality direct-glazing urethane is designed to wet out on the glass frit and prepared body surfaces, hold bead geometry, and cure into a strong-yet-flexible bond line that tolerates vibration and thermal cycling. Performance depends on using the full system, which is why pros follow the product data sheet for approved cleaners, primer or activator compatibility, flash times, and drive-away guidance. Fresh inventory matters because urethane has a shelf life; degraded or poorly stored product can cure inconsistently and increase the risk of edge lift or water tracking. At Bang AutoGlass, we rotate stock, verify expiration, and document lot details for every Mercedes-Benz Amg C-Class job. We also work with all comprehensive insurance carriers and offer convenient mobile scheduling when available.
Surface Prep That Makes the Bond: Cleaning, Pinchweld Protection, and Primer/Activator Steps
Surface preparation is where most sunroof leaks and wind-noise issues are either prevented or unintentionally built into the job. For Mercedes-Benz Amg C-Class sunroof glass replacement, we cover the interior, remove the damaged glass, and clear all fragments so nothing ends up in tracks, drains, or the perimeter bonding channel. Next we evaluate the pinchweld (roof bonding flange). Rather than scraping to bare metal, we typically trim the existing urethane to an even, stable base; that uniform foundation improves bead control and supports the correct glass height. If we find scratches through paint, exposed metal, or corrosion, we protect the area immediately so rust does not spread under the new bond line. Then we complete chemical prep with approved cleaners and lint-free wipes to remove dust and oils, and we avoid touching prepped surfaces. Based on the urethane system, we apply the specified activator and or primer to the glass frit and required body areas and allow proper flash time. Finally, we dry-fit and confirm alignment so the new Mercedes-Benz Amg C-Class sunroof glass seats flush and compresses evenly for a consistent seal. This preparation-first workflow supports the lifetime workmanship warranty we provide.
Bead Design and Application for Mercedes-Benz Amg C-Class: Open Time, Bead Height, and Proper Tooling
Bead design determines whether a Mercedes-Benz Amg C-Class sunroof glass replacement behaves like an OEM install or becomes a leak and wind-noise issue. The urethane bead must be continuous and matched to the factory footprint so it can seal water out, hold the glass at the correct height, and absorb vibration. Timing is critical: once urethane is dispensed it begins to skin, and setting the glass outside the adhesive open time can reduce wet-out and adhesion. At Bang AutoGlass, we stage the job so dry-fit checks, alignment points, and trim interfaces are confirmed before dispensing. Then we lay the bead and set the glass promptly and squarely. Professional tooling matters: a high-thrust gun and a notched nozzle help create a stable V-bead that stays consistent through corners and transitions instead of slumping or thinning. Bead height is a balance. Too little height can leave thin spots and micro-gaps that become leaks; too much can prevent proper seating, cause excessive squeeze-out, or push moldings out of position. After placement, the glass is lowered in a controlled motion and pressed evenly-no rocking or smearing-so the bond line contacts uniformly without trapping air. The outcome is a sealed, flush Mercedes-Benz Amg C-Class sunroof glass replacement built to resist water intrusion, wind whistle, and vibration over time.
Cure Time and Safe-Use Timing: Temperature/Humidity Effects and Minimum Drive-Away Guidance
Urethane doesn't "finish" when the glass is set; it keeps curing as it absorbs moisture from the air, and temperature and humidity shape that curve. For a Mercedes-Benz Amg C-Class sunroof glass replacement, warm and humid conditions generally help the adhesive reach early handling strength sooner, while cold weather or very dry air can slow the process. Different direct-glazing urethanes have different safe drive-away ratings, so follow the product data sheet (PDS) for the exact adhesive and conditions at the job site. Protecting the bond early is key: the bead is still developing internal strength during the first hours, even if the edges feel firm. For most Mercedes-Benz Amg C-Class installations, a minimum one-hour set period before normal driving is a reasonable baseline, but in cold, windy, or unusually dry conditions, adding extra time reduces risk. During the initial cure window, close doors gently, avoid rough roads and aggressive highway speeds when possible, and skip automatic or high-pressure washes for at least 48 hours. These steps help the perimeter seal stay intact, reduce wind-whistle risk, and allow the urethane to reach the flexibility and strength it was engineered to provide. Bang AutoGlass will give job-specific guidance at your appointment.
Post-Bond Quality Checks on Mercedes-Benz Amg C-Class: Leak Testing, Wind Noise, Flush Fit, and Documentation
After the urethane is applied and the glass is set, quality control confirms your Mercedes-Benz Amg C-Class sunroof glass replacement will stay dry, quiet, and visually correct. We begin with alignment: the glass should sit flush with the roof surface, with even spacing and consistent perimeter compression. Small errors can create wind noise, stress the bond line, or open micro-gaps, so we check corners, transitions, and trim interfaces before the vehicle leaves. When conditions allow, we validate sealing performance with a controlled perimeter water check and look for any sign of moisture migration into the headliner, pillars, or interior trim. We also evaluate common non-bond contributors that mimic bonding failures-blocked drains, debris in channels, or damaged weather components-and call out anything we see so you're not chasing the wrong fix. For wind-noise prevention, we confirm continuous bead contact, clean edges, and moldings seated without distortion. To close out, Bang AutoGlass provides documentation and care guidance (safe drive-away timing, wash restrictions during early cure) plus warranty details. If insurance is involved, we can note claim information for your records, and our lifetime workmanship warranty backs the installation long after your Mercedes-Benz Amg C-Class replacement.
Services
Service Areas
Urethane Bonding for Mercedes-Benz Amg C-Class Sunroof Glass Replacement: Why Adhesive Quality Matters
What Urethane Does in Mercedes-Benz Amg C-Class Sunroof Glass Replacement: Sealing, Strength, and Vibration Control
In a Mercedes-Benz Amg C-Class, the urethane bond is what makes a sunroof glass replacement behave like a factory roof component, not an add-on. Automotive urethane is a direct-glazing polyurethane adhesive engineered to seal, retain, and dampen vibration in one system. When the bead is applied evenly and compressed correctly, it forms a continuous perimeter barrier that blocks water paths that can stain the headliner, damage trim, and create lingering odors. Once cured, urethane provides high retention strength while staying flexible, so the glass remains positioned as the body flexes and the roof opening moves through temperature swings. That elasticity also reduces NVH, helping prevent squeaks, rattles, and wind whistle when the glass is seated flush and evenly supported. Bang AutoGlass follows OEM-style bonding practices for Mercedes-Benz Amg C-Class sunroof glass replacement so the roof system stays sealed and quiet over time. We bring mobile service to your home or workplace, often with next-day availability. Most replacements take about 30 to 45 minutes onsite, and we recommend at least one hour of adhesive set time before safe drive-away. Every replacement is backed by our lifetime workmanship warranty.
Choosing Adhesive Quality: Direct-Glazing Formulas, Crash-Test Performance, and Freshness Controls
Adhesive quality is the difference between a quick install and a Mercedes-Benz Amg C-Class sunroof glass replacement that remains dry, quiet, and securely retained. Urethane is a family of one-component, moisture-cure polyurethane formulas engineered for direct-glazing, and not every cartridge performs the same. Viscosity affects whether the bead holds its profile for proper glass height, open time controls the window to set the glass before wet-out drops, and cure behavior determines when safe handling strength develops. High-quality direct-glazing urethane is designed to wet out on the glass frit and prepared body surfaces, hold bead geometry, and cure into a strong-yet-flexible bond line that tolerates vibration and thermal cycling. Performance depends on using the full system, which is why pros follow the product data sheet for approved cleaners, primer or activator compatibility, flash times, and drive-away guidance. Fresh inventory matters because urethane has a shelf life; degraded or poorly stored product can cure inconsistently and increase the risk of edge lift or water tracking. At Bang AutoGlass, we rotate stock, verify expiration, and document lot details for every Mercedes-Benz Amg C-Class job. We also work with all comprehensive insurance carriers and offer convenient mobile scheduling when available.
Surface Prep That Makes the Bond: Cleaning, Pinchweld Protection, and Primer/Activator Steps
Surface preparation is where most sunroof leaks and wind-noise issues are either prevented or unintentionally built into the job. For Mercedes-Benz Amg C-Class sunroof glass replacement, we cover the interior, remove the damaged glass, and clear all fragments so nothing ends up in tracks, drains, or the perimeter bonding channel. Next we evaluate the pinchweld (roof bonding flange). Rather than scraping to bare metal, we typically trim the existing urethane to an even, stable base; that uniform foundation improves bead control and supports the correct glass height. If we find scratches through paint, exposed metal, or corrosion, we protect the area immediately so rust does not spread under the new bond line. Then we complete chemical prep with approved cleaners and lint-free wipes to remove dust and oils, and we avoid touching prepped surfaces. Based on the urethane system, we apply the specified activator and or primer to the glass frit and required body areas and allow proper flash time. Finally, we dry-fit and confirm alignment so the new Mercedes-Benz Amg C-Class sunroof glass seats flush and compresses evenly for a consistent seal. This preparation-first workflow supports the lifetime workmanship warranty we provide.
Bead Design and Application for Mercedes-Benz Amg C-Class: Open Time, Bead Height, and Proper Tooling
Bead design determines whether a Mercedes-Benz Amg C-Class sunroof glass replacement behaves like an OEM install or becomes a leak and wind-noise issue. The urethane bead must be continuous and matched to the factory footprint so it can seal water out, hold the glass at the correct height, and absorb vibration. Timing is critical: once urethane is dispensed it begins to skin, and setting the glass outside the adhesive open time can reduce wet-out and adhesion. At Bang AutoGlass, we stage the job so dry-fit checks, alignment points, and trim interfaces are confirmed before dispensing. Then we lay the bead and set the glass promptly and squarely. Professional tooling matters: a high-thrust gun and a notched nozzle help create a stable V-bead that stays consistent through corners and transitions instead of slumping or thinning. Bead height is a balance. Too little height can leave thin spots and micro-gaps that become leaks; too much can prevent proper seating, cause excessive squeeze-out, or push moldings out of position. After placement, the glass is lowered in a controlled motion and pressed evenly-no rocking or smearing-so the bond line contacts uniformly without trapping air. The outcome is a sealed, flush Mercedes-Benz Amg C-Class sunroof glass replacement built to resist water intrusion, wind whistle, and vibration over time.
Cure Time and Safe-Use Timing: Temperature/Humidity Effects and Minimum Drive-Away Guidance
Urethane doesn't "finish" when the glass is set; it keeps curing as it absorbs moisture from the air, and temperature and humidity shape that curve. For a Mercedes-Benz Amg C-Class sunroof glass replacement, warm and humid conditions generally help the adhesive reach early handling strength sooner, while cold weather or very dry air can slow the process. Different direct-glazing urethanes have different safe drive-away ratings, so follow the product data sheet (PDS) for the exact adhesive and conditions at the job site. Protecting the bond early is key: the bead is still developing internal strength during the first hours, even if the edges feel firm. For most Mercedes-Benz Amg C-Class installations, a minimum one-hour set period before normal driving is a reasonable baseline, but in cold, windy, or unusually dry conditions, adding extra time reduces risk. During the initial cure window, close doors gently, avoid rough roads and aggressive highway speeds when possible, and skip automatic or high-pressure washes for at least 48 hours. These steps help the perimeter seal stay intact, reduce wind-whistle risk, and allow the urethane to reach the flexibility and strength it was engineered to provide. Bang AutoGlass will give job-specific guidance at your appointment.
Post-Bond Quality Checks on Mercedes-Benz Amg C-Class: Leak Testing, Wind Noise, Flush Fit, and Documentation
After the urethane is applied and the glass is set, quality control confirms your Mercedes-Benz Amg C-Class sunroof glass replacement will stay dry, quiet, and visually correct. We begin with alignment: the glass should sit flush with the roof surface, with even spacing and consistent perimeter compression. Small errors can create wind noise, stress the bond line, or open micro-gaps, so we check corners, transitions, and trim interfaces before the vehicle leaves. When conditions allow, we validate sealing performance with a controlled perimeter water check and look for any sign of moisture migration into the headliner, pillars, or interior trim. We also evaluate common non-bond contributors that mimic bonding failures-blocked drains, debris in channels, or damaged weather components-and call out anything we see so you're not chasing the wrong fix. For wind-noise prevention, we confirm continuous bead contact, clean edges, and moldings seated without distortion. To close out, Bang AutoGlass provides documentation and care guidance (safe drive-away timing, wash restrictions during early cure) plus warranty details. If insurance is involved, we can note claim information for your records, and our lifetime workmanship warranty backs the installation long after your Mercedes-Benz Amg C-Class replacement.
Services
Service Areas
Urethane Bonding for Mercedes-Benz Amg C-Class Sunroof Glass Replacement: Why Adhesive Quality Matters
What Urethane Does in Mercedes-Benz Amg C-Class Sunroof Glass Replacement: Sealing, Strength, and Vibration Control
In a Mercedes-Benz Amg C-Class, the urethane bond is what makes a sunroof glass replacement behave like a factory roof component, not an add-on. Automotive urethane is a direct-glazing polyurethane adhesive engineered to seal, retain, and dampen vibration in one system. When the bead is applied evenly and compressed correctly, it forms a continuous perimeter barrier that blocks water paths that can stain the headliner, damage trim, and create lingering odors. Once cured, urethane provides high retention strength while staying flexible, so the glass remains positioned as the body flexes and the roof opening moves through temperature swings. That elasticity also reduces NVH, helping prevent squeaks, rattles, and wind whistle when the glass is seated flush and evenly supported. Bang AutoGlass follows OEM-style bonding practices for Mercedes-Benz Amg C-Class sunroof glass replacement so the roof system stays sealed and quiet over time. We bring mobile service to your home or workplace, often with next-day availability. Most replacements take about 30 to 45 minutes onsite, and we recommend at least one hour of adhesive set time before safe drive-away. Every replacement is backed by our lifetime workmanship warranty.
Choosing Adhesive Quality: Direct-Glazing Formulas, Crash-Test Performance, and Freshness Controls
Adhesive quality is the difference between a quick install and a Mercedes-Benz Amg C-Class sunroof glass replacement that remains dry, quiet, and securely retained. Urethane is a family of one-component, moisture-cure polyurethane formulas engineered for direct-glazing, and not every cartridge performs the same. Viscosity affects whether the bead holds its profile for proper glass height, open time controls the window to set the glass before wet-out drops, and cure behavior determines when safe handling strength develops. High-quality direct-glazing urethane is designed to wet out on the glass frit and prepared body surfaces, hold bead geometry, and cure into a strong-yet-flexible bond line that tolerates vibration and thermal cycling. Performance depends on using the full system, which is why pros follow the product data sheet for approved cleaners, primer or activator compatibility, flash times, and drive-away guidance. Fresh inventory matters because urethane has a shelf life; degraded or poorly stored product can cure inconsistently and increase the risk of edge lift or water tracking. At Bang AutoGlass, we rotate stock, verify expiration, and document lot details for every Mercedes-Benz Amg C-Class job. We also work with all comprehensive insurance carriers and offer convenient mobile scheduling when available.
Surface Prep That Makes the Bond: Cleaning, Pinchweld Protection, and Primer/Activator Steps
Surface preparation is where most sunroof leaks and wind-noise issues are either prevented or unintentionally built into the job. For Mercedes-Benz Amg C-Class sunroof glass replacement, we cover the interior, remove the damaged glass, and clear all fragments so nothing ends up in tracks, drains, or the perimeter bonding channel. Next we evaluate the pinchweld (roof bonding flange). Rather than scraping to bare metal, we typically trim the existing urethane to an even, stable base; that uniform foundation improves bead control and supports the correct glass height. If we find scratches through paint, exposed metal, or corrosion, we protect the area immediately so rust does not spread under the new bond line. Then we complete chemical prep with approved cleaners and lint-free wipes to remove dust and oils, and we avoid touching prepped surfaces. Based on the urethane system, we apply the specified activator and or primer to the glass frit and required body areas and allow proper flash time. Finally, we dry-fit and confirm alignment so the new Mercedes-Benz Amg C-Class sunroof glass seats flush and compresses evenly for a consistent seal. This preparation-first workflow supports the lifetime workmanship warranty we provide.
Bead Design and Application for Mercedes-Benz Amg C-Class: Open Time, Bead Height, and Proper Tooling
Bead design determines whether a Mercedes-Benz Amg C-Class sunroof glass replacement behaves like an OEM install or becomes a leak and wind-noise issue. The urethane bead must be continuous and matched to the factory footprint so it can seal water out, hold the glass at the correct height, and absorb vibration. Timing is critical: once urethane is dispensed it begins to skin, and setting the glass outside the adhesive open time can reduce wet-out and adhesion. At Bang AutoGlass, we stage the job so dry-fit checks, alignment points, and trim interfaces are confirmed before dispensing. Then we lay the bead and set the glass promptly and squarely. Professional tooling matters: a high-thrust gun and a notched nozzle help create a stable V-bead that stays consistent through corners and transitions instead of slumping or thinning. Bead height is a balance. Too little height can leave thin spots and micro-gaps that become leaks; too much can prevent proper seating, cause excessive squeeze-out, or push moldings out of position. After placement, the glass is lowered in a controlled motion and pressed evenly-no rocking or smearing-so the bond line contacts uniformly without trapping air. The outcome is a sealed, flush Mercedes-Benz Amg C-Class sunroof glass replacement built to resist water intrusion, wind whistle, and vibration over time.
Cure Time and Safe-Use Timing: Temperature/Humidity Effects and Minimum Drive-Away Guidance
Urethane doesn't "finish" when the glass is set; it keeps curing as it absorbs moisture from the air, and temperature and humidity shape that curve. For a Mercedes-Benz Amg C-Class sunroof glass replacement, warm and humid conditions generally help the adhesive reach early handling strength sooner, while cold weather or very dry air can slow the process. Different direct-glazing urethanes have different safe drive-away ratings, so follow the product data sheet (PDS) for the exact adhesive and conditions at the job site. Protecting the bond early is key: the bead is still developing internal strength during the first hours, even if the edges feel firm. For most Mercedes-Benz Amg C-Class installations, a minimum one-hour set period before normal driving is a reasonable baseline, but in cold, windy, or unusually dry conditions, adding extra time reduces risk. During the initial cure window, close doors gently, avoid rough roads and aggressive highway speeds when possible, and skip automatic or high-pressure washes for at least 48 hours. These steps help the perimeter seal stay intact, reduce wind-whistle risk, and allow the urethane to reach the flexibility and strength it was engineered to provide. Bang AutoGlass will give job-specific guidance at your appointment.
Post-Bond Quality Checks on Mercedes-Benz Amg C-Class: Leak Testing, Wind Noise, Flush Fit, and Documentation
After the urethane is applied and the glass is set, quality control confirms your Mercedes-Benz Amg C-Class sunroof glass replacement will stay dry, quiet, and visually correct. We begin with alignment: the glass should sit flush with the roof surface, with even spacing and consistent perimeter compression. Small errors can create wind noise, stress the bond line, or open micro-gaps, so we check corners, transitions, and trim interfaces before the vehicle leaves. When conditions allow, we validate sealing performance with a controlled perimeter water check and look for any sign of moisture migration into the headliner, pillars, or interior trim. We also evaluate common non-bond contributors that mimic bonding failures-blocked drains, debris in channels, or damaged weather components-and call out anything we see so you're not chasing the wrong fix. For wind-noise prevention, we confirm continuous bead contact, clean edges, and moldings seated without distortion. To close out, Bang AutoGlass provides documentation and care guidance (safe drive-away timing, wash restrictions during early cure) plus warranty details. If insurance is involved, we can note claim information for your records, and our lifetime workmanship warranty backs the installation long after your Mercedes-Benz Amg C-Class replacement.
Enjoy More Relevant Blogs
How to Schedule Mobile Sunroof Glass Replacement for Mercedes-Benz Amg C-Class
Schedule mobile sunroof glass replacement for Mercedes-Benz Amg C-Class: what info to share, photos to take, timing, and what to expect on-site—avoid delays today.
How Much Does Mercedes-Benz Amg C-Class Sunroof Glass Replacement Cost? OEM vs Aftermarket, Labor Factors, and Estimate Tips
Mercedes-Benz Amg C-Class sunroof glass replacement cost: price drivers, OEM vs aftermarket options, labor factors, and tips for an accurate estimate—compare now.
OEM-Quality Sunroof Glass Replacement for Mercedes-Benz Amg C-Class: DOT Markings and FMVSS 205 Explained
OEM-quality sunroof glass replacement for Mercedes-Benz Amg C-Class: understand DOT markings and FMVSS 205, plus fit checks that help prevent leaks—get it done right.
Sunroof Leak on Mercedes-Benz Amg C-Class: Drain Fix vs Sunroof Glass Replacement Decision Guide
Sunroof leak on Mercedes-Benz Amg C-Class? Compare drain fixes vs sunroof glass replacement, warning signs, and the best next step to stop water damage fast today.
Sunroof vs Moonroof on Mercedes-Benz Amg C-Class: How to Order the Correct Roof Glass Replacement
Sunroof vs moonroof on Mercedes-Benz Amg C-Class: learn the differences, how to confirm your roof type, and order the correct replacement glass to avoid fit and leaks.
Wind Noise After Sunroof Glass Replacement on Mercedes-Benz Amg C-Class: Seal, Fit, and Alignment Checklist
Wind noise after Mercedes-Benz Amg C-Class sunroof glass replacement? Check seal fit, alignment, and hardware so the roof closes tight and stays quiet at speed daily.
Will My Comprehensive Policy Cover Mercedes-Benz Amg C-Class Sunroof Glass Replacement? Claim Steps, Photos to Take, and Deductible Basics
Will comprehensive insurance cover Mercedes-Benz Amg C-Class sunroof glass replacement? See claim steps, photos to take, deductible basics, and tips before filing.
After Breakage: Mercedes-Benz Amg C-Class Sunroof Glass Replacement Cleanup, Weather Protection, and Next Steps
After breakage on a Mercedes-Benz Amg C-Class sunroof, follow safe cleanup steps, protect the interior from weather, and know what to expect with replacement next.
Panoramic Sunroof Glass Replacement for Mercedes-Benz Amg C-Class: Install Steps and Safe Drive-Away Timing
Panoramic sunroof glass replacement for Mercedes-Benz Amg C-Class: walk through install steps, cure-time rules, and safe drive-away timing so you avoid leaks. Book now.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm