Services
Service Areas
ADAS Calibration Checklist for Mercedes-Benz Amg Glc: Documentation, Verification, and Final Safety Checks
Identify Mercedes-Benz Amg Glc ADAS Systems and OEM Calibration Triggers
Calibrating ADAS on a Mercedes-Benz Amg Glc starts by confirming which driver-assist features are installed and which OEM events require calibration. Decode the VIN and verify trim and option packages, then run a full diagnostic scan that lists ADAS modules and sensor configurations. Common components include a windshield forward camera for lane functions, front radar for adaptive cruise and emergency braking, rear corner radar for blind spot monitoring, and park-assist ultrasonics or surround-view cameras. If the equipment list is unclear, verify it in OEM service information so no static or dynamic routine is missed. Next, match the repair to the OEM trigger list. Windshield replacement on a Mercedes-Benz Amg Glc with a bonded camera bracket often requires camera calibration because glass fit, bracket position, or camera R&I can change aim. Other triggers include sensor R&I, bracket repairs, module replacement or programming, wheel alignment, tire-size or ride-height changes, and DTCs indicating an adaptation or basic setting is needed. The checklist goal is to map each Mercedes-Benz Amg Glc system to the exact OEM workflow, then verify results so safety features operate as designed.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Pre-calibration documentation makes ADAS work on a Mercedes-Benz Amg Glc verifiable, insurer-ready, and aligned to OEM guidance. Start with a pre-repair diagnostic scan to capture the DTC baseline across camera and radar modules, ABS/ESC, steering angle, and related body or gateway systems. Then plan for a post-scan to confirm all modules return to normal status after repair. Build a clear narrative that connects the baseline to the calibration trigger. Record the customer concern, VIN, and mileage, then document the work performed: windshield replacement on a Mercedes-Benz Amg Glc with a camera bracket, camera or radar removal and installation, bumper/grille repairs near the radar, alignment or suspension changes, module replacement, or software updates. Add photos of the windshield, camera bracket, and sensor mounts, plus any damage or aftermarket parts that could affect aim. Package the evidence for review: save the full pre-scan report (current, pending, and history codes when available), freeze-frame data, and scan tool platform/software version, and note whether the OEM calls for static, dynamic, or combined calibration. Bang AutoGlass works with all carriers when comprehensive coverage applies, and complete documentation helps reduce claim delays and supports our lifetime workmanship warranty.
Vehicle Readiness Checklist for Mercedes-Benz Amg Glc: Tires, Alignment, Ride Height, and Sensor/Glass Prep
A reliable calibration depends on vehicle readiness. For a Mercedes-Benz Amg Glc, confirm tires are OEM-approved, matched side-to-side, evenly worn, and inflated to spec. Wrong tire size, low pressure, or uneven tread changes rolling radius and steering calculations and can distort lane keeping and adaptive cruise behavior. Verify wheel alignment is within OEM specifications before calibrating; toe, thrust angle, and steering angle sensor values influence how cameras and radar interpret the lane. Next, confirm ride height and loading. Remove heavy cargo, keep the spare tire in place, and maintain normal operating weight; many OEM procedures also specify a minimum fuel level. Aftermarket lifts/levels, non-OEM wheel packages, damaged springs, or unresolved collision damage are common go/no-go issues because they change sensor geometry. Finish with sensor and glass preparation. If the Mercedes-Benz Amg Glc uses a windshield-mounted camera, inspect the bracket, verify the correct windshield and attachments, and keep the camera view area clean and dry with no stickers, haze, tint artifacts, or residue. Confirm wiper and cowl fitment, ensure radar sensors are seated and unobstructed, and remove anything that blocks sightlines. At Bang AutoGlass, windshield replacement typically takes 30-45 minutes; allow at least one hour of safe drive-away time before dynamic calibration driving.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
OEM-compliant setup prevents ADAS calibration failures on a Mercedes-Benz Amg Glc. Measure level across the working footprint, including where targets will stand, and keep the area clean so stands do not settle. Set the vehicle reference by establishing centerline and thrust line, centering the steering wheel, and keeping the vehicle straight. Verify OEM-specified space so targets can be positioned at exact distances, offsets, and heights. Stabilize the environment. Avoid sunlight, windshield glare, flicker, deep shadows, rain, dust, and bay traffic that changes lighting. Select the correct OEM targets for the system being calibrated (camera, radar, surround-view) and inspect boards for fading, creases, or contamination. Confirm stands and measurement tools are accurate and locked down. Verify scan tool coverage for the Mercedes-Benz Amg Glc, select the correct routine for year and trim, and record tool and software versions on the work order. Maintain voltage with a battery maintainer. Follow OEM no-touch requirements during static routines: keep doors closed, avoid leaning on the vehicle, and do not enter the cabin unless directed. These disciplines deliver repeatable results and fewer comebacks at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Mercedes-Benz Amg Glc
For a Mercedes-Benz Amg Glc, verification links completion to performance. Start with a post-repair scan as soon as the routine ends. Review camera and radar module status, clear any setup codes, and re-scan to confirm no DTCs remain current or pending. Failed-attempt or communication codes may not illuminate the dash, yet OEM and insurer processes often expect documented post-scan proof. Perform any OEM-directed road validation. If dynamic calibration is required, meet the conditions for roadway type, lane-marking quality, speed band, and minimum duration, and avoid weather or lighting restrictions that invalidate learning. Use a route with consistent lane lines and safe traffic flow. Confirm lane keeping and lane departure behave predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false warn. Validate blind spot and rear cross-traffic alerts where equipped. After windshield work on a Mercedes-Benz Amg Glc, allow cure time before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and the adhesive needs at least one hour of safe drive-away time before dynamic driving. Finish by confirming the cluster is clear. If warnings persist, recheck alignment, tire spec, ride height, sensor mounting, and glass fitment, then follow the OEM troubleshooting and recalibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Mercedes-Benz Amg Glc
Closeout records protect the driver and the claim after ADAS work on a Mercedes-Benz Amg Glc. Build a packet that can be reviewed later without context. Include the scan tool calibration report with VIN, date/time, routine identification, calibrated modules, and pass or fail outcome. Attach pre-scan and post-scan reports to document DTC status before and after service. Document prerequisites and setup with photos of sensor mounting points and the windshield or camera bracket area, plus images showing target placement when static calibration was performed. Include required measurements or alignment printouts. If the Mercedes-Benz Amg Glc required dynamic calibration or validation driving, record the OEM routine name, conditions met (speed band, duration), and confirmation that no ADAS warnings were present at completion. Log scan tool platform, software version, target or fixture set used, and battery maintainer usage for compliance and reimbursement. Provide the customer a copy with the invoice and guidance if a warning returns. Bang AutoGlass accepts all insurance companies when comprehensive coverage applies, and thorough documentation reduces back-and-forth while supporting our lifetime workmanship warranty. Retain the packet per policy for each Mercedes-Benz Amg Glc.
Services
Service Areas
ADAS Calibration Checklist for Mercedes-Benz Amg Glc: Documentation, Verification, and Final Safety Checks
Identify Mercedes-Benz Amg Glc ADAS Systems and OEM Calibration Triggers
Calibrating ADAS on a Mercedes-Benz Amg Glc starts by confirming which driver-assist features are installed and which OEM events require calibration. Decode the VIN and verify trim and option packages, then run a full diagnostic scan that lists ADAS modules and sensor configurations. Common components include a windshield forward camera for lane functions, front radar for adaptive cruise and emergency braking, rear corner radar for blind spot monitoring, and park-assist ultrasonics or surround-view cameras. If the equipment list is unclear, verify it in OEM service information so no static or dynamic routine is missed. Next, match the repair to the OEM trigger list. Windshield replacement on a Mercedes-Benz Amg Glc with a bonded camera bracket often requires camera calibration because glass fit, bracket position, or camera R&I can change aim. Other triggers include sensor R&I, bracket repairs, module replacement or programming, wheel alignment, tire-size or ride-height changes, and DTCs indicating an adaptation or basic setting is needed. The checklist goal is to map each Mercedes-Benz Amg Glc system to the exact OEM workflow, then verify results so safety features operate as designed.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Pre-calibration documentation makes ADAS work on a Mercedes-Benz Amg Glc verifiable, insurer-ready, and aligned to OEM guidance. Start with a pre-repair diagnostic scan to capture the DTC baseline across camera and radar modules, ABS/ESC, steering angle, and related body or gateway systems. Then plan for a post-scan to confirm all modules return to normal status after repair. Build a clear narrative that connects the baseline to the calibration trigger. Record the customer concern, VIN, and mileage, then document the work performed: windshield replacement on a Mercedes-Benz Amg Glc with a camera bracket, camera or radar removal and installation, bumper/grille repairs near the radar, alignment or suspension changes, module replacement, or software updates. Add photos of the windshield, camera bracket, and sensor mounts, plus any damage or aftermarket parts that could affect aim. Package the evidence for review: save the full pre-scan report (current, pending, and history codes when available), freeze-frame data, and scan tool platform/software version, and note whether the OEM calls for static, dynamic, or combined calibration. Bang AutoGlass works with all carriers when comprehensive coverage applies, and complete documentation helps reduce claim delays and supports our lifetime workmanship warranty.
Vehicle Readiness Checklist for Mercedes-Benz Amg Glc: Tires, Alignment, Ride Height, and Sensor/Glass Prep
A reliable calibration depends on vehicle readiness. For a Mercedes-Benz Amg Glc, confirm tires are OEM-approved, matched side-to-side, evenly worn, and inflated to spec. Wrong tire size, low pressure, or uneven tread changes rolling radius and steering calculations and can distort lane keeping and adaptive cruise behavior. Verify wheel alignment is within OEM specifications before calibrating; toe, thrust angle, and steering angle sensor values influence how cameras and radar interpret the lane. Next, confirm ride height and loading. Remove heavy cargo, keep the spare tire in place, and maintain normal operating weight; many OEM procedures also specify a minimum fuel level. Aftermarket lifts/levels, non-OEM wheel packages, damaged springs, or unresolved collision damage are common go/no-go issues because they change sensor geometry. Finish with sensor and glass preparation. If the Mercedes-Benz Amg Glc uses a windshield-mounted camera, inspect the bracket, verify the correct windshield and attachments, and keep the camera view area clean and dry with no stickers, haze, tint artifacts, or residue. Confirm wiper and cowl fitment, ensure radar sensors are seated and unobstructed, and remove anything that blocks sightlines. At Bang AutoGlass, windshield replacement typically takes 30-45 minutes; allow at least one hour of safe drive-away time before dynamic calibration driving.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
OEM-compliant setup prevents ADAS calibration failures on a Mercedes-Benz Amg Glc. Measure level across the working footprint, including where targets will stand, and keep the area clean so stands do not settle. Set the vehicle reference by establishing centerline and thrust line, centering the steering wheel, and keeping the vehicle straight. Verify OEM-specified space so targets can be positioned at exact distances, offsets, and heights. Stabilize the environment. Avoid sunlight, windshield glare, flicker, deep shadows, rain, dust, and bay traffic that changes lighting. Select the correct OEM targets for the system being calibrated (camera, radar, surround-view) and inspect boards for fading, creases, or contamination. Confirm stands and measurement tools are accurate and locked down. Verify scan tool coverage for the Mercedes-Benz Amg Glc, select the correct routine for year and trim, and record tool and software versions on the work order. Maintain voltage with a battery maintainer. Follow OEM no-touch requirements during static routines: keep doors closed, avoid leaning on the vehicle, and do not enter the cabin unless directed. These disciplines deliver repeatable results and fewer comebacks at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Mercedes-Benz Amg Glc
For a Mercedes-Benz Amg Glc, verification links completion to performance. Start with a post-repair scan as soon as the routine ends. Review camera and radar module status, clear any setup codes, and re-scan to confirm no DTCs remain current or pending. Failed-attempt or communication codes may not illuminate the dash, yet OEM and insurer processes often expect documented post-scan proof. Perform any OEM-directed road validation. If dynamic calibration is required, meet the conditions for roadway type, lane-marking quality, speed band, and minimum duration, and avoid weather or lighting restrictions that invalidate learning. Use a route with consistent lane lines and safe traffic flow. Confirm lane keeping and lane departure behave predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false warn. Validate blind spot and rear cross-traffic alerts where equipped. After windshield work on a Mercedes-Benz Amg Glc, allow cure time before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and the adhesive needs at least one hour of safe drive-away time before dynamic driving. Finish by confirming the cluster is clear. If warnings persist, recheck alignment, tire spec, ride height, sensor mounting, and glass fitment, then follow the OEM troubleshooting and recalibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Mercedes-Benz Amg Glc
Closeout records protect the driver and the claim after ADAS work on a Mercedes-Benz Amg Glc. Build a packet that can be reviewed later without context. Include the scan tool calibration report with VIN, date/time, routine identification, calibrated modules, and pass or fail outcome. Attach pre-scan and post-scan reports to document DTC status before and after service. Document prerequisites and setup with photos of sensor mounting points and the windshield or camera bracket area, plus images showing target placement when static calibration was performed. Include required measurements or alignment printouts. If the Mercedes-Benz Amg Glc required dynamic calibration or validation driving, record the OEM routine name, conditions met (speed band, duration), and confirmation that no ADAS warnings were present at completion. Log scan tool platform, software version, target or fixture set used, and battery maintainer usage for compliance and reimbursement. Provide the customer a copy with the invoice and guidance if a warning returns. Bang AutoGlass accepts all insurance companies when comprehensive coverage applies, and thorough documentation reduces back-and-forth while supporting our lifetime workmanship warranty. Retain the packet per policy for each Mercedes-Benz Amg Glc.
Services
Service Areas
ADAS Calibration Checklist for Mercedes-Benz Amg Glc: Documentation, Verification, and Final Safety Checks
Identify Mercedes-Benz Amg Glc ADAS Systems and OEM Calibration Triggers
Calibrating ADAS on a Mercedes-Benz Amg Glc starts by confirming which driver-assist features are installed and which OEM events require calibration. Decode the VIN and verify trim and option packages, then run a full diagnostic scan that lists ADAS modules and sensor configurations. Common components include a windshield forward camera for lane functions, front radar for adaptive cruise and emergency braking, rear corner radar for blind spot monitoring, and park-assist ultrasonics or surround-view cameras. If the equipment list is unclear, verify it in OEM service information so no static or dynamic routine is missed. Next, match the repair to the OEM trigger list. Windshield replacement on a Mercedes-Benz Amg Glc with a bonded camera bracket often requires camera calibration because glass fit, bracket position, or camera R&I can change aim. Other triggers include sensor R&I, bracket repairs, module replacement or programming, wheel alignment, tire-size or ride-height changes, and DTCs indicating an adaptation or basic setting is needed. The checklist goal is to map each Mercedes-Benz Amg Glc system to the exact OEM workflow, then verify results so safety features operate as designed.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Pre-calibration documentation makes ADAS work on a Mercedes-Benz Amg Glc verifiable, insurer-ready, and aligned to OEM guidance. Start with a pre-repair diagnostic scan to capture the DTC baseline across camera and radar modules, ABS/ESC, steering angle, and related body or gateway systems. Then plan for a post-scan to confirm all modules return to normal status after repair. Build a clear narrative that connects the baseline to the calibration trigger. Record the customer concern, VIN, and mileage, then document the work performed: windshield replacement on a Mercedes-Benz Amg Glc with a camera bracket, camera or radar removal and installation, bumper/grille repairs near the radar, alignment or suspension changes, module replacement, or software updates. Add photos of the windshield, camera bracket, and sensor mounts, plus any damage or aftermarket parts that could affect aim. Package the evidence for review: save the full pre-scan report (current, pending, and history codes when available), freeze-frame data, and scan tool platform/software version, and note whether the OEM calls for static, dynamic, or combined calibration. Bang AutoGlass works with all carriers when comprehensive coverage applies, and complete documentation helps reduce claim delays and supports our lifetime workmanship warranty.
Vehicle Readiness Checklist for Mercedes-Benz Amg Glc: Tires, Alignment, Ride Height, and Sensor/Glass Prep
A reliable calibration depends on vehicle readiness. For a Mercedes-Benz Amg Glc, confirm tires are OEM-approved, matched side-to-side, evenly worn, and inflated to spec. Wrong tire size, low pressure, or uneven tread changes rolling radius and steering calculations and can distort lane keeping and adaptive cruise behavior. Verify wheel alignment is within OEM specifications before calibrating; toe, thrust angle, and steering angle sensor values influence how cameras and radar interpret the lane. Next, confirm ride height and loading. Remove heavy cargo, keep the spare tire in place, and maintain normal operating weight; many OEM procedures also specify a minimum fuel level. Aftermarket lifts/levels, non-OEM wheel packages, damaged springs, or unresolved collision damage are common go/no-go issues because they change sensor geometry. Finish with sensor and glass preparation. If the Mercedes-Benz Amg Glc uses a windshield-mounted camera, inspect the bracket, verify the correct windshield and attachments, and keep the camera view area clean and dry with no stickers, haze, tint artifacts, or residue. Confirm wiper and cowl fitment, ensure radar sensors are seated and unobstructed, and remove anything that blocks sightlines. At Bang AutoGlass, windshield replacement typically takes 30-45 minutes; allow at least one hour of safe drive-away time before dynamic calibration driving.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
OEM-compliant setup prevents ADAS calibration failures on a Mercedes-Benz Amg Glc. Measure level across the working footprint, including where targets will stand, and keep the area clean so stands do not settle. Set the vehicle reference by establishing centerline and thrust line, centering the steering wheel, and keeping the vehicle straight. Verify OEM-specified space so targets can be positioned at exact distances, offsets, and heights. Stabilize the environment. Avoid sunlight, windshield glare, flicker, deep shadows, rain, dust, and bay traffic that changes lighting. Select the correct OEM targets for the system being calibrated (camera, radar, surround-view) and inspect boards for fading, creases, or contamination. Confirm stands and measurement tools are accurate and locked down. Verify scan tool coverage for the Mercedes-Benz Amg Glc, select the correct routine for year and trim, and record tool and software versions on the work order. Maintain voltage with a battery maintainer. Follow OEM no-touch requirements during static routines: keep doors closed, avoid leaning on the vehicle, and do not enter the cabin unless directed. These disciplines deliver repeatable results and fewer comebacks at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Mercedes-Benz Amg Glc
For a Mercedes-Benz Amg Glc, verification links completion to performance. Start with a post-repair scan as soon as the routine ends. Review camera and radar module status, clear any setup codes, and re-scan to confirm no DTCs remain current or pending. Failed-attempt or communication codes may not illuminate the dash, yet OEM and insurer processes often expect documented post-scan proof. Perform any OEM-directed road validation. If dynamic calibration is required, meet the conditions for roadway type, lane-marking quality, speed band, and minimum duration, and avoid weather or lighting restrictions that invalidate learning. Use a route with consistent lane lines and safe traffic flow. Confirm lane keeping and lane departure behave predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false warn. Validate blind spot and rear cross-traffic alerts where equipped. After windshield work on a Mercedes-Benz Amg Glc, allow cure time before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and the adhesive needs at least one hour of safe drive-away time before dynamic driving. Finish by confirming the cluster is clear. If warnings persist, recheck alignment, tire spec, ride height, sensor mounting, and glass fitment, then follow the OEM troubleshooting and recalibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Mercedes-Benz Amg Glc
Closeout records protect the driver and the claim after ADAS work on a Mercedes-Benz Amg Glc. Build a packet that can be reviewed later without context. Include the scan tool calibration report with VIN, date/time, routine identification, calibrated modules, and pass or fail outcome. Attach pre-scan and post-scan reports to document DTC status before and after service. Document prerequisites and setup with photos of sensor mounting points and the windshield or camera bracket area, plus images showing target placement when static calibration was performed. Include required measurements or alignment printouts. If the Mercedes-Benz Amg Glc required dynamic calibration or validation driving, record the OEM routine name, conditions met (speed band, duration), and confirmation that no ADAS warnings were present at completion. Log scan tool platform, software version, target or fixture set used, and battery maintainer usage for compliance and reimbursement. Provide the customer a copy with the invoice and guidance if a warning returns. Bang AutoGlass accepts all insurance companies when comprehensive coverage applies, and thorough documentation reduces back-and-forth while supporting our lifetime workmanship warranty. Retain the packet per policy for each Mercedes-Benz Amg Glc.
Enjoy More Relevant Blogs
Mobile ADAS Calibration for Mercedes-Benz Amg Glc: What to Expect On-Site and Why Setup Matters
Mobile ADAS calibration for Mercedes-Benz Amg Glc: what to expect on-site, space and lighting needs, and why setup and verification matter after repairs today.
ADAS Warning Lights on Mercedes-Benz Amg Glc: When Calibration Is the Fix and When It’s Not
ADAS warning lights on your Mercedes-Benz Amg Glc? Learn when calibration fixes lane assist or AEB issues, when it will not, and what to check next. Schedule help.
How to Schedule ADAS Calibration for Mercedes-Benz Amg Glc After Windshield Replacement
Schedule ADAS calibration for Mercedes-Benz Amg Glc after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
Pre- and Post-Calibration Scans for Mercedes-Benz Amg Glc: Proving Systems Are Set Correctly
Pre- and post-calibration scans for Mercedes-Benz Amg Glc: see why scans matter, what they verify, and how reports prove ADAS systems are set correctly after service.
Do You Need ADAS Calibration for Mercedes-Benz Amg Glc After a Wheel Alignment, Suspension Work, or a Minor Collision?
Do you need ADAS calibration for a Mercedes-Benz Amg Glc after alignment, suspension work, or a minor collision? Signs, timelines, safety risks, and costs today.
Static vs Dynamic ADAS Calibration for Mercedes-Benz Amg Glc: What the Difference Means
Static vs dynamic ADAS calibration for Mercedes-Benz Amg Glc: key differences, when each is required, how long it takes, and what affects accuracy for safety.
Camera Calibration for Mercedes-Benz Amg Glc: Lane Assist and Forward Collision Accuracy Explained
Need camera calibration for your Mercedes-Benz Amg Glc? See how calibration affects lane assist and forward collision accuracy after windshield service or repairs.
How Much Does ADAS Calibration Cost for Mercedes-Benz Amg Glc? What Drives Pricing and What Insurance Typically Covers
How much does ADAS calibration cost for a Mercedes-Benz Amg Glc? Learn pricing drivers, camera vs radar needs, labor time, and what insurance typically covers.
OEM Calibration Requirements for Mercedes-Benz Amg Glc: How to Confirm What Must Be Calibrated
OEM calibration requirements for Mercedes-Benz Amg Glc: how to confirm what must be calibrated after repairs, what triggers recalibration, and what proof to ask for.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm