Services
Service Areas
How Long After Mercedes-Benz Amg Gle Coupe Quarter Panel Glass Replacement Can You Drive or Wash the Car? Urethane Cure-Time Rules
How Long After Mercedes-Benz Amg Gle Coupe Quarter Glass Replacement Can You Drive? Safe Drive-Away Time Explained
For a Mercedes-Benz Amg Gle Coupe quarter glass replacement, most customers want a simple rule on driving and washing. Shops use safe drive-away time (SDAT) to answer the driving part: it is when the urethane has enough initial strength to hold the quarter panel glass during normal driving and pressure changes from closing doors. SDAT depends on urethane chemistry, glass size, bead thickness, and temperature and humidity at installation. Bang AutoGlass typically completes the on-site work in 30 to 45 minutes, then requires a minimum 1-hour wait before you drive. After that hour, you can drive, but keep forces low for the rest of the day: smooth starts and stops, fewer potholes, and gentle door closes. To protect the fresh seal, avoid automatic car washes and do not aim a pressure washer at the quarter window for at least 24 hours. If you have a long commute, uneven roads, or cold and dry weather, add extra time whenever you can. These habits reduce issues like wind noise, water leaks, or slight glass movement before the bond gains higher strength. Bang AutoGlass is mobile, can often come next day, works with all insurance companies when comprehensive coverage applies, and backs installs with a lifetime workmanship warranty.
Mercedes-Benz Amg Gle Coupe Quarter Panel Glass Adhesive Cure Time: Urethane Types and What “Fully Cured” Really Means
Quarter panel glass replacement depends less on the glass itself and more on the adhesive system that bonds it to the body. Most reputable shops use one-part, moisture-cure polyurethane (urethane) because it delivers a strong, flexible bond and a watertight seal. Urethane does not dry like paint; it cures through a chemical reaction that uses moisture in the air. The bead typically skins on the outside first, then cures inward over time. That is why product sheets list two timeframes: minimum drive-away time (SDAT or MDAT) and full cure. Minimum drive-away time is the earliest point the bond has enough strength for normal driving; full cure is when the entire bead has developed consistent strength through its thickness, commonly 24 to 48 hours in typical conditions and longer in cool, dry weather. Fast-cure or high-modulus urethanes can reach SDAT sooner, while standard-cure systems build strength more gradually. For your Mercedes-Benz Amg Gle Coupe, the quarter glass may feel solid quickly, but the adhesive is still curing. Bang AutoGlass requires at least 1 hour before driving and recommends avoiding car washes and direct pressure on the seal for the first day to help keep the quarter panel glass seated and quiet long term.
What Changes Mercedes-Benz Amg Gle Coupe Quarter Glass Cure Time: Temperature, Humidity, Vehicle Movement, and Adhesive Bead Size
Cure time after a Mercedes-Benz Amg Gle Coupe quarter panel glass install is shaped by the environment and by how the vehicle is handled right after the glass is set. Temperature is first. If the air is cool or the body opening is cold to the touch, urethane builds strength more slowly; warmer conditions help, although direct sun can shorten working time for the technician. Humidity is the other major lever. One-part polyurethane urethane needs moisture to cure, so very low humidity can stretch the schedule, while higher humidity tends to accelerate the reaction. Next is movement: rough roads, steep driveway twists, and repeated door slams flex the body opening and create pressure changes that can stress a fresh bond line. Those stresses can translate into wind noise or a water leak path later. Finally, bead geometry matters. A thicker bead or a design that requires more build-up takes longer to cure through than a thin, uniform bead, which is why timing can vary even between similar Mercedes-Benz Amg Gle Coupe trims. Plan accordingly: after Bang AutoGlass finishes the replacement (typically 30 to 45 minutes), wait at least 1 hour before driving, keep the rest of the day low-stress, and avoid automatic washes or pressure washing along the seal for at least 24 hours.
When Can You Wash a Mercedes-Benz Amg Gle Coupe After Quarter Glass Replacement? Car Wash and Pressure-Water Rules
Washing a Mercedes-Benz Amg Gle Coupe after quarter panel glass replacement is about protecting a seal that is still curing. Urethane can reach minimum strength for driving fairly quickly, but “drivable” isn’t “fully cured.” Over the first 24–48 hours, the adhesive bead continues to harden and the perimeter is most vulnerable to focused water pressure. Delay automatic car washes for 1–2 days. Brush and touchless systems can direct high-pressure water at the quarter glass edge and along moldings. If that pressure hits the seam too soon, it can stress the bond line, push water where it shouldn’t go, or lift trim slightly—leading to leaks, wind noise, or rattles later. If your Mercedes-Benz Amg Gle Coupe needs cleaning sooner, choose a gentle hand wash. Keep the stream indirect, avoid blasting the perimeter, and skip pressure washers and underbody wands that spray upward toward the quarter glass seam. Avoid aggressive chemicals or edge-detailing tools until cure time is complete. Bang AutoGlass requires at least 1 hour before driving; for washing, next-day to two-day care is the safer play to preserve a tight, quiet seal.
Mercedes-Benz Amg Gle Coupe Quarter Glass Aftercare Checklist: Tape, Windows, Doors, and Leak-Test Timing
After your Mercedes-Benz Amg Gle Coupe quarter glass replacement, the first 24–48 hours are when aftercare matters most. Leave any retention tape in place for at least 24 hours (or as your technician directs) so the quarter panel glass stays aligned while the urethane cures. Manage cabin pressure: close doors gently, avoid repeated slams, and if possible keep a window cracked slightly on day one. Limit body flex by avoiding potholes, rough roads, steep driveway twists, and heavy vibration. Don’t pick at molding or trim, and don’t add DIY silicone—extra sealant can trap moisture and make professional corrections harder. For washing and leak checks, don’t soak the perimeter right away. Keep high-pressure water off the glass edge for 24–48 hours. After that window, do a controlled recheck: look for uneven gaps, listen for a whistle at highway speeds, and inspect interior trim for moisture after rain. If anything seems off, contact Bang AutoGlass. We’re mobile (often as soon as next day), work with all insurance companies when comprehensive coverage applies, and back installs with a lifetime workmanship warranty.
Avoid Leaks and Wind Noise on Mercedes-Benz Amg Gle Coupe Quarter Glass: Common Mistakes, Warranty Tips, and When to Recheck
To keep your Mercedes-Benz Amg Gle Coupe quarter glass tight and quiet, protect the urethane seal line during the cure window. For the first day or two, avoid rough-road impacts, steep driveway twisting, removing retention tape early, and repeated door slams that spike cabin pressure. Hold off on automatic washes and keep high-pressure water away from the quarter glass seam until at least 24–48 hours have passed. Fit-and-finish details matter, too. Slight misalignment, trim that isn’t fully seated, or an uneven urethane bead can create micro-gaps that show up as a whistle at highway speed or a drip after rain. Addressing symptoms early helps prevent damp trim, mildew, corrosion, and interior damage. After the cure window, inspect the perimeter for lifted molding and uneven gaps, then take a short highway drive to listen for air leakage. After your first gentle wash, verify there’s no moisture behind interior panels near the quarter glass opening. If anything is questionable, contact Bang AutoGlass. We provide mobile service (often next day), a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Services
Service Areas
How Long After Mercedes-Benz Amg Gle Coupe Quarter Panel Glass Replacement Can You Drive or Wash the Car? Urethane Cure-Time Rules
How Long After Mercedes-Benz Amg Gle Coupe Quarter Glass Replacement Can You Drive? Safe Drive-Away Time Explained
For a Mercedes-Benz Amg Gle Coupe quarter glass replacement, most customers want a simple rule on driving and washing. Shops use safe drive-away time (SDAT) to answer the driving part: it is when the urethane has enough initial strength to hold the quarter panel glass during normal driving and pressure changes from closing doors. SDAT depends on urethane chemistry, glass size, bead thickness, and temperature and humidity at installation. Bang AutoGlass typically completes the on-site work in 30 to 45 minutes, then requires a minimum 1-hour wait before you drive. After that hour, you can drive, but keep forces low for the rest of the day: smooth starts and stops, fewer potholes, and gentle door closes. To protect the fresh seal, avoid automatic car washes and do not aim a pressure washer at the quarter window for at least 24 hours. If you have a long commute, uneven roads, or cold and dry weather, add extra time whenever you can. These habits reduce issues like wind noise, water leaks, or slight glass movement before the bond gains higher strength. Bang AutoGlass is mobile, can often come next day, works with all insurance companies when comprehensive coverage applies, and backs installs with a lifetime workmanship warranty.
Mercedes-Benz Amg Gle Coupe Quarter Panel Glass Adhesive Cure Time: Urethane Types and What “Fully Cured” Really Means
Quarter panel glass replacement depends less on the glass itself and more on the adhesive system that bonds it to the body. Most reputable shops use one-part, moisture-cure polyurethane (urethane) because it delivers a strong, flexible bond and a watertight seal. Urethane does not dry like paint; it cures through a chemical reaction that uses moisture in the air. The bead typically skins on the outside first, then cures inward over time. That is why product sheets list two timeframes: minimum drive-away time (SDAT or MDAT) and full cure. Minimum drive-away time is the earliest point the bond has enough strength for normal driving; full cure is when the entire bead has developed consistent strength through its thickness, commonly 24 to 48 hours in typical conditions and longer in cool, dry weather. Fast-cure or high-modulus urethanes can reach SDAT sooner, while standard-cure systems build strength more gradually. For your Mercedes-Benz Amg Gle Coupe, the quarter glass may feel solid quickly, but the adhesive is still curing. Bang AutoGlass requires at least 1 hour before driving and recommends avoiding car washes and direct pressure on the seal for the first day to help keep the quarter panel glass seated and quiet long term.
What Changes Mercedes-Benz Amg Gle Coupe Quarter Glass Cure Time: Temperature, Humidity, Vehicle Movement, and Adhesive Bead Size
Cure time after a Mercedes-Benz Amg Gle Coupe quarter panel glass install is shaped by the environment and by how the vehicle is handled right after the glass is set. Temperature is first. If the air is cool or the body opening is cold to the touch, urethane builds strength more slowly; warmer conditions help, although direct sun can shorten working time for the technician. Humidity is the other major lever. One-part polyurethane urethane needs moisture to cure, so very low humidity can stretch the schedule, while higher humidity tends to accelerate the reaction. Next is movement: rough roads, steep driveway twists, and repeated door slams flex the body opening and create pressure changes that can stress a fresh bond line. Those stresses can translate into wind noise or a water leak path later. Finally, bead geometry matters. A thicker bead or a design that requires more build-up takes longer to cure through than a thin, uniform bead, which is why timing can vary even between similar Mercedes-Benz Amg Gle Coupe trims. Plan accordingly: after Bang AutoGlass finishes the replacement (typically 30 to 45 minutes), wait at least 1 hour before driving, keep the rest of the day low-stress, and avoid automatic washes or pressure washing along the seal for at least 24 hours.
When Can You Wash a Mercedes-Benz Amg Gle Coupe After Quarter Glass Replacement? Car Wash and Pressure-Water Rules
Washing a Mercedes-Benz Amg Gle Coupe after quarter panel glass replacement is about protecting a seal that is still curing. Urethane can reach minimum strength for driving fairly quickly, but “drivable” isn’t “fully cured.” Over the first 24–48 hours, the adhesive bead continues to harden and the perimeter is most vulnerable to focused water pressure. Delay automatic car washes for 1–2 days. Brush and touchless systems can direct high-pressure water at the quarter glass edge and along moldings. If that pressure hits the seam too soon, it can stress the bond line, push water where it shouldn’t go, or lift trim slightly—leading to leaks, wind noise, or rattles later. If your Mercedes-Benz Amg Gle Coupe needs cleaning sooner, choose a gentle hand wash. Keep the stream indirect, avoid blasting the perimeter, and skip pressure washers and underbody wands that spray upward toward the quarter glass seam. Avoid aggressive chemicals or edge-detailing tools until cure time is complete. Bang AutoGlass requires at least 1 hour before driving; for washing, next-day to two-day care is the safer play to preserve a tight, quiet seal.
Mercedes-Benz Amg Gle Coupe Quarter Glass Aftercare Checklist: Tape, Windows, Doors, and Leak-Test Timing
After your Mercedes-Benz Amg Gle Coupe quarter glass replacement, the first 24–48 hours are when aftercare matters most. Leave any retention tape in place for at least 24 hours (or as your technician directs) so the quarter panel glass stays aligned while the urethane cures. Manage cabin pressure: close doors gently, avoid repeated slams, and if possible keep a window cracked slightly on day one. Limit body flex by avoiding potholes, rough roads, steep driveway twists, and heavy vibration. Don’t pick at molding or trim, and don’t add DIY silicone—extra sealant can trap moisture and make professional corrections harder. For washing and leak checks, don’t soak the perimeter right away. Keep high-pressure water off the glass edge for 24–48 hours. After that window, do a controlled recheck: look for uneven gaps, listen for a whistle at highway speeds, and inspect interior trim for moisture after rain. If anything seems off, contact Bang AutoGlass. We’re mobile (often as soon as next day), work with all insurance companies when comprehensive coverage applies, and back installs with a lifetime workmanship warranty.
Avoid Leaks and Wind Noise on Mercedes-Benz Amg Gle Coupe Quarter Glass: Common Mistakes, Warranty Tips, and When to Recheck
To keep your Mercedes-Benz Amg Gle Coupe quarter glass tight and quiet, protect the urethane seal line during the cure window. For the first day or two, avoid rough-road impacts, steep driveway twisting, removing retention tape early, and repeated door slams that spike cabin pressure. Hold off on automatic washes and keep high-pressure water away from the quarter glass seam until at least 24–48 hours have passed. Fit-and-finish details matter, too. Slight misalignment, trim that isn’t fully seated, or an uneven urethane bead can create micro-gaps that show up as a whistle at highway speed or a drip after rain. Addressing symptoms early helps prevent damp trim, mildew, corrosion, and interior damage. After the cure window, inspect the perimeter for lifted molding and uneven gaps, then take a short highway drive to listen for air leakage. After your first gentle wash, verify there’s no moisture behind interior panels near the quarter glass opening. If anything is questionable, contact Bang AutoGlass. We provide mobile service (often next day), a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Services
Service Areas
How Long After Mercedes-Benz Amg Gle Coupe Quarter Panel Glass Replacement Can You Drive or Wash the Car? Urethane Cure-Time Rules
How Long After Mercedes-Benz Amg Gle Coupe Quarter Glass Replacement Can You Drive? Safe Drive-Away Time Explained
For a Mercedes-Benz Amg Gle Coupe quarter glass replacement, most customers want a simple rule on driving and washing. Shops use safe drive-away time (SDAT) to answer the driving part: it is when the urethane has enough initial strength to hold the quarter panel glass during normal driving and pressure changes from closing doors. SDAT depends on urethane chemistry, glass size, bead thickness, and temperature and humidity at installation. Bang AutoGlass typically completes the on-site work in 30 to 45 minutes, then requires a minimum 1-hour wait before you drive. After that hour, you can drive, but keep forces low for the rest of the day: smooth starts and stops, fewer potholes, and gentle door closes. To protect the fresh seal, avoid automatic car washes and do not aim a pressure washer at the quarter window for at least 24 hours. If you have a long commute, uneven roads, or cold and dry weather, add extra time whenever you can. These habits reduce issues like wind noise, water leaks, or slight glass movement before the bond gains higher strength. Bang AutoGlass is mobile, can often come next day, works with all insurance companies when comprehensive coverage applies, and backs installs with a lifetime workmanship warranty.
Mercedes-Benz Amg Gle Coupe Quarter Panel Glass Adhesive Cure Time: Urethane Types and What “Fully Cured” Really Means
Quarter panel glass replacement depends less on the glass itself and more on the adhesive system that bonds it to the body. Most reputable shops use one-part, moisture-cure polyurethane (urethane) because it delivers a strong, flexible bond and a watertight seal. Urethane does not dry like paint; it cures through a chemical reaction that uses moisture in the air. The bead typically skins on the outside first, then cures inward over time. That is why product sheets list two timeframes: minimum drive-away time (SDAT or MDAT) and full cure. Minimum drive-away time is the earliest point the bond has enough strength for normal driving; full cure is when the entire bead has developed consistent strength through its thickness, commonly 24 to 48 hours in typical conditions and longer in cool, dry weather. Fast-cure or high-modulus urethanes can reach SDAT sooner, while standard-cure systems build strength more gradually. For your Mercedes-Benz Amg Gle Coupe, the quarter glass may feel solid quickly, but the adhesive is still curing. Bang AutoGlass requires at least 1 hour before driving and recommends avoiding car washes and direct pressure on the seal for the first day to help keep the quarter panel glass seated and quiet long term.
What Changes Mercedes-Benz Amg Gle Coupe Quarter Glass Cure Time: Temperature, Humidity, Vehicle Movement, and Adhesive Bead Size
Cure time after a Mercedes-Benz Amg Gle Coupe quarter panel glass install is shaped by the environment and by how the vehicle is handled right after the glass is set. Temperature is first. If the air is cool or the body opening is cold to the touch, urethane builds strength more slowly; warmer conditions help, although direct sun can shorten working time for the technician. Humidity is the other major lever. One-part polyurethane urethane needs moisture to cure, so very low humidity can stretch the schedule, while higher humidity tends to accelerate the reaction. Next is movement: rough roads, steep driveway twists, and repeated door slams flex the body opening and create pressure changes that can stress a fresh bond line. Those stresses can translate into wind noise or a water leak path later. Finally, bead geometry matters. A thicker bead or a design that requires more build-up takes longer to cure through than a thin, uniform bead, which is why timing can vary even between similar Mercedes-Benz Amg Gle Coupe trims. Plan accordingly: after Bang AutoGlass finishes the replacement (typically 30 to 45 minutes), wait at least 1 hour before driving, keep the rest of the day low-stress, and avoid automatic washes or pressure washing along the seal for at least 24 hours.
When Can You Wash a Mercedes-Benz Amg Gle Coupe After Quarter Glass Replacement? Car Wash and Pressure-Water Rules
Washing a Mercedes-Benz Amg Gle Coupe after quarter panel glass replacement is about protecting a seal that is still curing. Urethane can reach minimum strength for driving fairly quickly, but “drivable” isn’t “fully cured.” Over the first 24–48 hours, the adhesive bead continues to harden and the perimeter is most vulnerable to focused water pressure. Delay automatic car washes for 1–2 days. Brush and touchless systems can direct high-pressure water at the quarter glass edge and along moldings. If that pressure hits the seam too soon, it can stress the bond line, push water where it shouldn’t go, or lift trim slightly—leading to leaks, wind noise, or rattles later. If your Mercedes-Benz Amg Gle Coupe needs cleaning sooner, choose a gentle hand wash. Keep the stream indirect, avoid blasting the perimeter, and skip pressure washers and underbody wands that spray upward toward the quarter glass seam. Avoid aggressive chemicals or edge-detailing tools until cure time is complete. Bang AutoGlass requires at least 1 hour before driving; for washing, next-day to two-day care is the safer play to preserve a tight, quiet seal.
Mercedes-Benz Amg Gle Coupe Quarter Glass Aftercare Checklist: Tape, Windows, Doors, and Leak-Test Timing
After your Mercedes-Benz Amg Gle Coupe quarter glass replacement, the first 24–48 hours are when aftercare matters most. Leave any retention tape in place for at least 24 hours (or as your technician directs) so the quarter panel glass stays aligned while the urethane cures. Manage cabin pressure: close doors gently, avoid repeated slams, and if possible keep a window cracked slightly on day one. Limit body flex by avoiding potholes, rough roads, steep driveway twists, and heavy vibration. Don’t pick at molding or trim, and don’t add DIY silicone—extra sealant can trap moisture and make professional corrections harder. For washing and leak checks, don’t soak the perimeter right away. Keep high-pressure water off the glass edge for 24–48 hours. After that window, do a controlled recheck: look for uneven gaps, listen for a whistle at highway speeds, and inspect interior trim for moisture after rain. If anything seems off, contact Bang AutoGlass. We’re mobile (often as soon as next day), work with all insurance companies when comprehensive coverage applies, and back installs with a lifetime workmanship warranty.
Avoid Leaks and Wind Noise on Mercedes-Benz Amg Gle Coupe Quarter Glass: Common Mistakes, Warranty Tips, and When to Recheck
To keep your Mercedes-Benz Amg Gle Coupe quarter glass tight and quiet, protect the urethane seal line during the cure window. For the first day or two, avoid rough-road impacts, steep driveway twisting, removing retention tape early, and repeated door slams that spike cabin pressure. Hold off on automatic washes and keep high-pressure water away from the quarter glass seam until at least 24–48 hours have passed. Fit-and-finish details matter, too. Slight misalignment, trim that isn’t fully seated, or an uneven urethane bead can create micro-gaps that show up as a whistle at highway speed or a drip after rain. Addressing symptoms early helps prevent damp trim, mildew, corrosion, and interior damage. After the cure window, inspect the perimeter for lifted molding and uneven gaps, then take a short highway drive to listen for air leakage. After your first gentle wash, verify there’s no moisture behind interior panels near the quarter glass opening. If anything is questionable, contact Bang AutoGlass. We provide mobile service (often next day), a lifetime workmanship warranty, and we work with all insurance companies when comprehensive coverage applies.
Enjoy More Relevant Blogs
OEM-Quality Quarter Glass Replacement for Mercedes-Benz Amg Gle Coupe: Fit, Trim, and Weather-Seal Checklist
OEM-quality quarter glass replacement for Mercedes-Benz Amg Gle Coupe: fit, trim, and weather-seal checklist for correct install, leak prevention, and clean finish.
How to Schedule Mobile Quarter Glass Replacement for Mercedes-Benz Amg Gle Coupe
Need mobile quarter glass replacement for Mercedes-Benz Amg Gle Coupe? Follow our scheduling checklist, photos to take, timing, and on-site tips to restore security.
Quarter Window Replacement for Mercedes-Benz Amg Gle Coupe: Step-by-Step From Cleanup to Drive-Away Time
Quarter window replacement for Mercedes-Benz Amg Gle Coupe: step-by-step from cleanup to install, urethane cure time, and safe drive-away and wash timing guide today.
Safety Standards Explained: DOT Markings and FMVSS 205 for Mercedes-Benz Amg Gle Coupe Quarter Glass Replacement
DOT markings and FMVSS 205 explained for Mercedes-Benz Amg Gle Coupe quarter glass replacement—how to verify safety markings and choose compliant OEM-quality glass.
Fixed Quarter Window vs Vent Glass on Mercedes-Benz Amg Gle Coupe: Ordering the Correct Replacement
Fixed quarter window vs vent glass on Mercedes-Benz Amg Gle Coupe: how to identify yours and order the correct replacement for fit, sealing, and safety—read this now.
How Much Does Mercedes-Benz Amg Gle Coupe Quarter Panel Glass Replacement Cost? Insurance Deductibles, Estimates, and Ways to Save
Cost to replace Mercedes-Benz Amg Gle Coupe quarter panel glass: key price factors, OEM vs aftermarket options, insurance deductibles, estimates, and smart ways to save.
After a Break-In: Mercedes-Benz Amg Gle Coupe Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Mercedes-Benz Amg Gle Coupe, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Tint & Privacy Glass Match Guide: Mercedes-Benz Amg Gle Coupe Quarter Glass Replacement Done Right
Tint and privacy match guide for Mercedes-Benz Amg Gle Coupe quarter glass replacement—how to match shade, markings, and fit so the new glass looks factory-perfect.
Stop Leaks and Wind Noise: What Proper Mercedes-Benz Amg Gle Coupe Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Mercedes-Benz Amg Gle Coupe quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm