Services
Service Areas
How Long Does Rear Glass Replacement Take on Mercedes-Benz G-Class? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Mercedes-Benz G-Class Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
A Mercedes-Benz G-Class rear glass replacement often seems to take longer than expected because the clock includes more than the swap itself. Even if a traditional shop can replace the back glass in 1–3 hours of labor, the overall timeline can grow due to part availability, paperwork, drop-off logistics, and the time required after installation before the vehicle should be driven. Technicians remove the damaged rear windshield/back glass, vacuum and clear fragments, prep the bonding surface, and then set the new rear window in fresh urethane with precise alignment so the seal is even. Bang AutoGlass makes the process easier by bringing mobile auto glass service to you. For most Mercedes-Benz G-Class rear window replacements, the hands-on work typically takes about 30–45 minutes. We then ask you to keep the vehicle parked for at least 1 hour so the urethane reaches a conservative safe drive-away baseline. Many customers schedule the service like an extended meeting, not an all-day errand. If you’re using insurance, rear glass replacement is usually processed under comprehensive coverage, and we can work with any carrier that provides it. Our lifetime workmanship warranty backs the installation for long-term peace of mind.
Mercedes-Benz G-Class Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
Rear window replacement on a Mercedes-Benz G-Class is a controlled procedure, and install time reflects all the steps around the glass. After staging the work area, we remove the necessary interior and exterior trim and disconnect components that interface with the back glass, including defroster connections and, on some vehicles, an antenna lead. If the rear window is broken, careful cleanup comes first: shards are removed, then small fragments are vacuumed from the rear deck, cargo area, and crevices so you’re not finding glass later. Next we prep the pinch weld by trimming old urethane, cleaning and decontaminating the surface, and addressing any rust that could compromise sealing. Where required by the adhesive system, we apply primer/activator per manufacturer instructions. We then apply a uniform bead of automotive urethane and set the new rear windshield/back glass with correct positioning so it seats evenly around the perimeter. Trim is reinstalled, the defroster is reconnected and verified, and a final inspection checks molding alignment and visible gaps that can lead to leaks or wind noise. Bang AutoGlass keeps these steps efficient on-site; most Mercedes-Benz G-Class back glass installs take about 30–45 minutes of hands-on work, then the vehicle must remain parked for the required urethane set time before driving.
Urethane Cure Time for Mercedes-Benz G-Class Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Mercedes-Benz G-Class back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Mercedes-Benz G-Class rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Mercedes-Benz G-Class Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Cure time for a Mercedes-Benz G-Class rear window replacement isn’t a single fixed number. The urethane must reach its minimum bond threshold (MDAT/SDAT) before the vehicle should be driven, and that threshold shifts with the adhesive system and the environment. Cooler temperatures generally slow moisture-cure chemistry, and low humidity can slow it further because the urethane needs ambient moisture to build strength. Warm conditions often help cure faster, but very hot, dry days can reduce open time and change how the bead handles during installation. That’s why adhesive selection matters: fast-cure urethanes are formulated to hit drive-away targets sooner within defined ranges, while conventional products may require longer stationary time; specialty systems may be chosen when temperatures are extremely low. The size and shape of the glass also influences outcomes. Bigger rear windshields/back glass—common on hatchbacks and SUVs—have more surface area and leverage, so consistent bead height, correct primers, and meticulous pinch-weld preparation are essential for even compression and sealing. Rust, old urethane high spots, oils, or dust can undermine adhesion and demand extra prep. Bang AutoGlass evaluates conditions on site for your Mercedes-Benz G-Class, chooses the right materials, and gives you a simple, vehicle-specific drive-away plan.
When Is It Safe to Drive After Mercedes-Benz G-Class Rear Glass Replacement? Practical Drive-Away Rules
Safe drive-away after a Mercedes-Benz G-Class rear glass replacement is determined by MDAT/SDAT—the minimum time the urethane must sit undisturbed to reach enough early strength for normal driving. Those times are not universal. They depend on the exact urethane product and on temperature and humidity during the install, so reputable technicians reference the adhesive manufacturer’s product data sheet instead of guessing. Under favorable conditions, some fast-cure systems can reach drive-away strength sooner, but cold or dry weather often extends the required wait; extreme heat can also alter working time and cure performance. For scheduling, treat the first hour as protected time. Bang AutoGlass requires at least 1 hour with your Mercedes-Benz G-Class parked after the back glass is installed before it is safe to drive. Don’t move it around a lot, don’t “creep it forward,” and don’t run quick errands. Once you’re cleared, take it easy for the rest of the day: avoid potholes and rough roads, close doors and the liftgate gently, and skip high-speed driving until the bond continues to mature. Insurance claims for rear window replacement are typically comprehensive, and every job is covered by our lifetime workmanship warranty.
Mercedes-Benz G-Class Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
To keep your Mercedes-Benz G-Class rear glass replacement sealed long-term, protect the bond during the first day or two. Start by honoring the stationary period you were given; Bang AutoGlass requires at least 1 hour before driving. If you notice retention tape across the rear windshield/back glass, leave it alone—it helps prevent small shifts and supports molding alignment while the urethane sets. Many installs benefit from keeping tape on about 24 hours, and sometimes up to 48 hours depending on conditions. For the next 24–48 hours, avoid high-pressure car washes, power washing, or blasting the edges of the glass with a hose. Pressurized water, detergents, and stiff brushes can disrupt a seal that hasn’t fully cured. Be mindful of cabin pressure too: close doors softly and avoid slamming the liftgate, since pressure spikes can stress fresh urethane. If possible, avoid rough construction roads and heavy vibration on day one. After the first rain or your first drive, check for dampness near trim, the headliner edge, or the cargo area, and report issues quickly. Finally, protect the rear defroster lines by cleaning with a soft microfiber cloth and non-abrasive cleaner—no razors or scouring pads.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Mercedes-Benz G-Class? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Mercedes-Benz G-Class Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
A Mercedes-Benz G-Class rear glass replacement often seems to take longer than expected because the clock includes more than the swap itself. Even if a traditional shop can replace the back glass in 1–3 hours of labor, the overall timeline can grow due to part availability, paperwork, drop-off logistics, and the time required after installation before the vehicle should be driven. Technicians remove the damaged rear windshield/back glass, vacuum and clear fragments, prep the bonding surface, and then set the new rear window in fresh urethane with precise alignment so the seal is even. Bang AutoGlass makes the process easier by bringing mobile auto glass service to you. For most Mercedes-Benz G-Class rear window replacements, the hands-on work typically takes about 30–45 minutes. We then ask you to keep the vehicle parked for at least 1 hour so the urethane reaches a conservative safe drive-away baseline. Many customers schedule the service like an extended meeting, not an all-day errand. If you’re using insurance, rear glass replacement is usually processed under comprehensive coverage, and we can work with any carrier that provides it. Our lifetime workmanship warranty backs the installation for long-term peace of mind.
Mercedes-Benz G-Class Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
Rear window replacement on a Mercedes-Benz G-Class is a controlled procedure, and install time reflects all the steps around the glass. After staging the work area, we remove the necessary interior and exterior trim and disconnect components that interface with the back glass, including defroster connections and, on some vehicles, an antenna lead. If the rear window is broken, careful cleanup comes first: shards are removed, then small fragments are vacuumed from the rear deck, cargo area, and crevices so you’re not finding glass later. Next we prep the pinch weld by trimming old urethane, cleaning and decontaminating the surface, and addressing any rust that could compromise sealing. Where required by the adhesive system, we apply primer/activator per manufacturer instructions. We then apply a uniform bead of automotive urethane and set the new rear windshield/back glass with correct positioning so it seats evenly around the perimeter. Trim is reinstalled, the defroster is reconnected and verified, and a final inspection checks molding alignment and visible gaps that can lead to leaks or wind noise. Bang AutoGlass keeps these steps efficient on-site; most Mercedes-Benz G-Class back glass installs take about 30–45 minutes of hands-on work, then the vehicle must remain parked for the required urethane set time before driving.
Urethane Cure Time for Mercedes-Benz G-Class Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Mercedes-Benz G-Class back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Mercedes-Benz G-Class rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Mercedes-Benz G-Class Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Cure time for a Mercedes-Benz G-Class rear window replacement isn’t a single fixed number. The urethane must reach its minimum bond threshold (MDAT/SDAT) before the vehicle should be driven, and that threshold shifts with the adhesive system and the environment. Cooler temperatures generally slow moisture-cure chemistry, and low humidity can slow it further because the urethane needs ambient moisture to build strength. Warm conditions often help cure faster, but very hot, dry days can reduce open time and change how the bead handles during installation. That’s why adhesive selection matters: fast-cure urethanes are formulated to hit drive-away targets sooner within defined ranges, while conventional products may require longer stationary time; specialty systems may be chosen when temperatures are extremely low. The size and shape of the glass also influences outcomes. Bigger rear windshields/back glass—common on hatchbacks and SUVs—have more surface area and leverage, so consistent bead height, correct primers, and meticulous pinch-weld preparation are essential for even compression and sealing. Rust, old urethane high spots, oils, or dust can undermine adhesion and demand extra prep. Bang AutoGlass evaluates conditions on site for your Mercedes-Benz G-Class, chooses the right materials, and gives you a simple, vehicle-specific drive-away plan.
When Is It Safe to Drive After Mercedes-Benz G-Class Rear Glass Replacement? Practical Drive-Away Rules
Safe drive-away after a Mercedes-Benz G-Class rear glass replacement is determined by MDAT/SDAT—the minimum time the urethane must sit undisturbed to reach enough early strength for normal driving. Those times are not universal. They depend on the exact urethane product and on temperature and humidity during the install, so reputable technicians reference the adhesive manufacturer’s product data sheet instead of guessing. Under favorable conditions, some fast-cure systems can reach drive-away strength sooner, but cold or dry weather often extends the required wait; extreme heat can also alter working time and cure performance. For scheduling, treat the first hour as protected time. Bang AutoGlass requires at least 1 hour with your Mercedes-Benz G-Class parked after the back glass is installed before it is safe to drive. Don’t move it around a lot, don’t “creep it forward,” and don’t run quick errands. Once you’re cleared, take it easy for the rest of the day: avoid potholes and rough roads, close doors and the liftgate gently, and skip high-speed driving until the bond continues to mature. Insurance claims for rear window replacement are typically comprehensive, and every job is covered by our lifetime workmanship warranty.
Mercedes-Benz G-Class Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
To keep your Mercedes-Benz G-Class rear glass replacement sealed long-term, protect the bond during the first day or two. Start by honoring the stationary period you were given; Bang AutoGlass requires at least 1 hour before driving. If you notice retention tape across the rear windshield/back glass, leave it alone—it helps prevent small shifts and supports molding alignment while the urethane sets. Many installs benefit from keeping tape on about 24 hours, and sometimes up to 48 hours depending on conditions. For the next 24–48 hours, avoid high-pressure car washes, power washing, or blasting the edges of the glass with a hose. Pressurized water, detergents, and stiff brushes can disrupt a seal that hasn’t fully cured. Be mindful of cabin pressure too: close doors softly and avoid slamming the liftgate, since pressure spikes can stress fresh urethane. If possible, avoid rough construction roads and heavy vibration on day one. After the first rain or your first drive, check for dampness near trim, the headliner edge, or the cargo area, and report issues quickly. Finally, protect the rear defroster lines by cleaning with a soft microfiber cloth and non-abrasive cleaner—no razors or scouring pads.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Mercedes-Benz G-Class? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Mercedes-Benz G-Class Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
A Mercedes-Benz G-Class rear glass replacement often seems to take longer than expected because the clock includes more than the swap itself. Even if a traditional shop can replace the back glass in 1–3 hours of labor, the overall timeline can grow due to part availability, paperwork, drop-off logistics, and the time required after installation before the vehicle should be driven. Technicians remove the damaged rear windshield/back glass, vacuum and clear fragments, prep the bonding surface, and then set the new rear window in fresh urethane with precise alignment so the seal is even. Bang AutoGlass makes the process easier by bringing mobile auto glass service to you. For most Mercedes-Benz G-Class rear window replacements, the hands-on work typically takes about 30–45 minutes. We then ask you to keep the vehicle parked for at least 1 hour so the urethane reaches a conservative safe drive-away baseline. Many customers schedule the service like an extended meeting, not an all-day errand. If you’re using insurance, rear glass replacement is usually processed under comprehensive coverage, and we can work with any carrier that provides it. Our lifetime workmanship warranty backs the installation for long-term peace of mind.
Mercedes-Benz G-Class Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
Rear window replacement on a Mercedes-Benz G-Class is a controlled procedure, and install time reflects all the steps around the glass. After staging the work area, we remove the necessary interior and exterior trim and disconnect components that interface with the back glass, including defroster connections and, on some vehicles, an antenna lead. If the rear window is broken, careful cleanup comes first: shards are removed, then small fragments are vacuumed from the rear deck, cargo area, and crevices so you’re not finding glass later. Next we prep the pinch weld by trimming old urethane, cleaning and decontaminating the surface, and addressing any rust that could compromise sealing. Where required by the adhesive system, we apply primer/activator per manufacturer instructions. We then apply a uniform bead of automotive urethane and set the new rear windshield/back glass with correct positioning so it seats evenly around the perimeter. Trim is reinstalled, the defroster is reconnected and verified, and a final inspection checks molding alignment and visible gaps that can lead to leaks or wind noise. Bang AutoGlass keeps these steps efficient on-site; most Mercedes-Benz G-Class back glass installs take about 30–45 minutes of hands-on work, then the vehicle must remain parked for the required urethane set time before driving.
Urethane Cure Time for Mercedes-Benz G-Class Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Mercedes-Benz G-Class back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Mercedes-Benz G-Class rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Mercedes-Benz G-Class Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Cure time for a Mercedes-Benz G-Class rear window replacement isn’t a single fixed number. The urethane must reach its minimum bond threshold (MDAT/SDAT) before the vehicle should be driven, and that threshold shifts with the adhesive system and the environment. Cooler temperatures generally slow moisture-cure chemistry, and low humidity can slow it further because the urethane needs ambient moisture to build strength. Warm conditions often help cure faster, but very hot, dry days can reduce open time and change how the bead handles during installation. That’s why adhesive selection matters: fast-cure urethanes are formulated to hit drive-away targets sooner within defined ranges, while conventional products may require longer stationary time; specialty systems may be chosen when temperatures are extremely low. The size and shape of the glass also influences outcomes. Bigger rear windshields/back glass—common on hatchbacks and SUVs—have more surface area and leverage, so consistent bead height, correct primers, and meticulous pinch-weld preparation are essential for even compression and sealing. Rust, old urethane high spots, oils, or dust can undermine adhesion and demand extra prep. Bang AutoGlass evaluates conditions on site for your Mercedes-Benz G-Class, chooses the right materials, and gives you a simple, vehicle-specific drive-away plan.
When Is It Safe to Drive After Mercedes-Benz G-Class Rear Glass Replacement? Practical Drive-Away Rules
Safe drive-away after a Mercedes-Benz G-Class rear glass replacement is determined by MDAT/SDAT—the minimum time the urethane must sit undisturbed to reach enough early strength for normal driving. Those times are not universal. They depend on the exact urethane product and on temperature and humidity during the install, so reputable technicians reference the adhesive manufacturer’s product data sheet instead of guessing. Under favorable conditions, some fast-cure systems can reach drive-away strength sooner, but cold or dry weather often extends the required wait; extreme heat can also alter working time and cure performance. For scheduling, treat the first hour as protected time. Bang AutoGlass requires at least 1 hour with your Mercedes-Benz G-Class parked after the back glass is installed before it is safe to drive. Don’t move it around a lot, don’t “creep it forward,” and don’t run quick errands. Once you’re cleared, take it easy for the rest of the day: avoid potholes and rough roads, close doors and the liftgate gently, and skip high-speed driving until the bond continues to mature. Insurance claims for rear window replacement are typically comprehensive, and every job is covered by our lifetime workmanship warranty.
Mercedes-Benz G-Class Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
To keep your Mercedes-Benz G-Class rear glass replacement sealed long-term, protect the bond during the first day or two. Start by honoring the stationary period you were given; Bang AutoGlass requires at least 1 hour before driving. If you notice retention tape across the rear windshield/back glass, leave it alone—it helps prevent small shifts and supports molding alignment while the urethane sets. Many installs benefit from keeping tape on about 24 hours, and sometimes up to 48 hours depending on conditions. For the next 24–48 hours, avoid high-pressure car washes, power washing, or blasting the edges of the glass with a hose. Pressurized water, detergents, and stiff brushes can disrupt a seal that hasn’t fully cured. Be mindful of cabin pressure too: close doors softly and avoid slamming the liftgate, since pressure spikes can stress fresh urethane. If possible, avoid rough construction roads and heavy vibration on day one. After the first rain or your first drive, check for dampness near trim, the headliner edge, or the cargo area, and report issues quickly. Finally, protect the rear defroster lines by cleaning with a soft microfiber cloth and non-abrasive cleaner—no razors or scouring pads.
Enjoy More Relevant Blogs
Back Glass Replacement on Mercedes-Benz G-Class: Defroster Tabs, Antenna Lines, and Connector Reattachment Basics
Back glass replacement on Mercedes-Benz G-Class: defroster tabs, antenna lines, and connectors explained, plus install tips to avoid damage and rework safely.
Post-Install Checks for Mercedes-Benz G-Class: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Mercedes-Benz G-Class: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
How to Schedule Mobile Rear Glass Replacement for Mercedes-Benz G-Class
Schedule mobile rear glass replacement for your Mercedes-Benz G-Class in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
OEM-Quality Rear Glass Replacement for Mercedes-Benz G-Class: Defroster Grid and Tint-Match Checklist
OEM-quality rear glass replacement for Mercedes-Benz G-Class: defroster grid and tint-match checklist, plus install tips to avoid callbacks—schedule service.
Tempered Safety Rear Glass Replacement for Mercedes-Benz G-Class: Understanding DOT Markings and FMVSS 205
Need Mercedes-Benz G-Class rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Rear Defroster Not Working on Mercedes-Benz G-Class? When Rear Glass Replacement Makes More Sense Than Repair
Rear defroster not working on your Mercedes-Benz G-Class? Learn common causes, when repair fails, and when rear glass replacement is the smarter fix for winter.
Shattered Back Window on Mercedes-Benz G-Class: A Step-by-Step Rear Glass Replacement Plan
Shattered back window on Mercedes-Benz G-Class? Follow a step-by-step rear glass replacement plan, cleanup tips, defroster notes, cure time, and drive-away rules.
How Much Does Rear Glass Replacement Cost for Mercedes-Benz G-Class? Pricing Factors, OEM vs Aftermarket, and Insurance Deductibles
Estimate Mercedes-Benz G-Class rear glass replacement cost. Compare OEM vs aftermarket, labor factors, insurance deductibles, and ways to save. Request a quote.
Rear Glass Replacement for Mercedes-Benz G-Class: What to Expect During Install and Aftercare
Rear glass replacement for Mercedes-Benz G-Class: what happens during install, defroster and tint considerations, cure time, and aftercare to prevent leaks long-term.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm