Services
Service Areas
ADAS After Windshield Replacement on Mercedes-Benz Glb: Calibration Basics and Safety Checks
Why ADAS Calibration Matters After Windshield Replacement on Mercedes-Benz Glb
After windshield replacement on a Mercedes-Benz Glb, ADAS calibration is about restoring factory camera aim, not simply clearing warning lights. Modern windshields have specific curvature and a defined viewing area, and the forward camera is mounted to the glass with precise alignment. Changing the glass can introduce small variations in mount position, bracket fit, or urethane cure height that shift the camera perspective. Because the camera helps your Mercedes-Benz Glb judge lane position, closing speed, and object location, even a slight shift can change how driver-assist systems respond. Drivers may notice frequent lane departure alerts, twitchy lane keeping, or adaptive cruise control that behaves inconsistently, and forward collision warning or automatic emergency braking may react later than intended. That is why OEM guidance commonly calls for recalibration when the windshield-mounted camera is disturbed. Bang AutoGlass structures the repair around safety and documentation: mobile windshield replacement can be scheduled as soon as next day, most installs take 30 to 45 minutes, and we require at least one hour of safe-drive time for adhesive cure before calibration driving. If your Mercedes-Benz Glb needs calibration, we explain the requirement, help coordinate the correct method, and provide written records, with acceptance of all insurance companies under comprehensive coverage and a lifetime workmanship warranty.
Which Mercedes-Benz Glb Systems Can Be Affected: Camera-Based ADAS Features and Safety Functions
When customers ask which Mercedes-Benz Glb systems can be affected by windshield replacement, we focus on camera-based ADAS because a single forward-facing camera can support multiple features. Common camera-driven functions include lane departure warning, lane keeping assist, lane centering, forward collision warning, automatic emergency braking, following distance monitoring, traffic sign recognition, and automatic high beams. Depending on year and trim, the same module may also support pedestrian or cyclist detection and collision avoidance steering support. Even when radar or ultrasonic sensors are present, many vehicles use sensor fusion, blending inputs, so the camera still helps confirm lanes and classify objects ahead. Because ADAS equipment varies by model year and trim, technicians should verify configuration by VIN, scan for related fault codes, and follow the OEM calibration requirement for the exact repair operation. At Bang AutoGlass, we confirm what ADAS features your Mercedes-Benz Glb is equipped with, inspect the camera mount and trim during replacement, and help coordinate any required windshield camera calibration so safety functions return to factory-level performance. We also review post-install warning indicators, advise on safe-drive time, and keep calibration records with the repair file for easier claims handling.
Static vs Dynamic ADAS Calibration for Mercedes-Benz Glb: When Each Method Applies
Static versus dynamic ADAS calibration describes how the Mercedes-Benz Glb windshield camera is returned to OEM specifications after new glass is installed. Static calibration is performed in a controlled environment using OEM targets, precise measurements, and a diagnostic scan tool. The setup must meet specification, including a level surface, correct target distance and height, centered steering wheel, proper tire pressure, correct ride height, and stable lighting. Dynamic calibration is completed through a prescribed drive cycle, with scan equipment connected while the Mercedes-Benz Glb is driven on clearly marked roads within the required speed range and time window. Weather, visibility, and lane quality matter because the camera needs consistent cues to learn lanes and reference points. Some vehicles require one method, some require both, and others need additional initialization or fault clearing, so guessing is risky. After calibration, a final scan and basic road test help confirm the system is free of related codes and operating normally. Bang AutoGlass completes mobile windshield replacement in about 30 to 45 minutes, requires at least one hour of safe-drive time for urethane cure, and then helps coordinate the correct calibration with verification documentation when available.
Pre-Calibration Requirements: Pre-Scan, DTC Review, and Vehicle Setup Checks
For ADAS calibration on a Mercedes-Benz Glb, the vehicle must match OEM prerequisites or the routine can fail or deliver poor accuracy. We begin with a pre-repair scan (pre-scan) to record module status and capture diagnostic trouble codes (DTCs) that may not illuminate the dash. Stored faults in the forward camera, steering angle, ABS/ESC, or radar-related modules can interrupt calibration after windshield replacement, and the scan helps separate pre-existing issues from repair-related ones. Next, we set the Mercedes-Benz Glb to the required calibration state: correct tire pressure, matching tire sizes, proper ride height, and no alignment or suspension concerns that could tilt camera aim. We control loading by clearing excess cargo and following any OEM fuel-level or weight requirements. Then we verify installation details that affect camera vision: correct windshield type, secure bracket integrity, and a clean camera zone with no haze, stickers, residue, or distortion. Static calibrations demand a level surface and exact target placement; dynamic calibrations require roads with clear lane markings and safe conditions. Bang AutoGlass is mobile, so we can replace your windshield at home or work, often next day. Most installs take 30 to 45 minutes, and we require at least one hour of safe-drive time for adhesive cure before any drive cycle or calibration.
Post-Calibration Safety Checks: Post-Scan Verification, Test Drive, and Documentation
For a Mercedes-Benz Glb, calibration is not the finish line; verified performance is. The post-calibration process starts with a post-scan to confirm the routine recorded as complete and to check for any remaining or newly triggered diagnostic trouble codes (DTCs) in the forward camera and supporting systems such as steering angle and ABS/ESC. The objective is to avoid latent faults that degrade lane guidance, warnings, or braking support. Next, we confirm the camera zone is clean and unobstructed, with no haze, residue, or stickers that can confuse image processing. Interior trim and the camera cover must fit correctly to limit glare, moisture, or vibration. We verify wipers, washer spray pattern, and defroster performance because the camera can only operate as designed if the windshield stays clear. When the OEM requires dynamic calibration, technicians complete the specified drive cycle and validate consistent behavior for lane departure warning, lane keeping assist, adaptive cruise control, and automatic emergency braking on that Mercedes-Benz Glb. Keep pre-scan and post-scan results plus calibration documentation for insurers and your records. Bang AutoGlass provides mobile replacement in 30 to 45 minutes with at least one hour of safe-drive time for adhesive cure, accepts comprehensive insurance, and includes a lifetime workmanship warranty.
OEM-Specific Procedures on Mercedes-Benz Glb: Why Calibration Steps Can Differ by Manufacturer
ADAS procedures are not universal, and Mercedes-Benz Glb calibration steps can vary by manufacturer, model year, and trim. Some OEMs require only static calibration with targets and precise measurements, others require a dynamic calibration drive cycle, and many require both. Acceptable tolerances can include target shape and distance, lighting conditions, floor levelness, steering angle setup, and vehicle loading (fuel level, cargo removal, or specified weight). OEM guidance also covers parts and materials. Automakers often note that windshield optical quality in the camera zone, camera bracket geometry, and specified adhesives can affect how the forward-facing camera reads lane lines and objects. Using the wrong glass, a distorted viewing area, or a compromised mount can lead to inconsistent responses in lane keeping assist, adaptive cruise control, automatic emergency braking, or traffic sign recognition. Many vehicles will not complete calibration if related DTCs, aim errors, alignment issues, or tire-size mismatches are present. At Bang AutoGlass, we do not guess. We verify ADAS equipment for your Mercedes-Benz Glb, reference VIN-specific OEM procedures, and coordinate the correct calibration method and documentation. You still get mobile, often next-day service, typical replacement time of 30 to 45 minutes, at least one hour of safe-drive time for adhesive cure, acceptance of comprehensive insurance, and a lifetime workmanship warranty.
Services
Service Areas
ADAS After Windshield Replacement on Mercedes-Benz Glb: Calibration Basics and Safety Checks
Why ADAS Calibration Matters After Windshield Replacement on Mercedes-Benz Glb
After windshield replacement on a Mercedes-Benz Glb, ADAS calibration is about restoring factory camera aim, not simply clearing warning lights. Modern windshields have specific curvature and a defined viewing area, and the forward camera is mounted to the glass with precise alignment. Changing the glass can introduce small variations in mount position, bracket fit, or urethane cure height that shift the camera perspective. Because the camera helps your Mercedes-Benz Glb judge lane position, closing speed, and object location, even a slight shift can change how driver-assist systems respond. Drivers may notice frequent lane departure alerts, twitchy lane keeping, or adaptive cruise control that behaves inconsistently, and forward collision warning or automatic emergency braking may react later than intended. That is why OEM guidance commonly calls for recalibration when the windshield-mounted camera is disturbed. Bang AutoGlass structures the repair around safety and documentation: mobile windshield replacement can be scheduled as soon as next day, most installs take 30 to 45 minutes, and we require at least one hour of safe-drive time for adhesive cure before calibration driving. If your Mercedes-Benz Glb needs calibration, we explain the requirement, help coordinate the correct method, and provide written records, with acceptance of all insurance companies under comprehensive coverage and a lifetime workmanship warranty.
Which Mercedes-Benz Glb Systems Can Be Affected: Camera-Based ADAS Features and Safety Functions
When customers ask which Mercedes-Benz Glb systems can be affected by windshield replacement, we focus on camera-based ADAS because a single forward-facing camera can support multiple features. Common camera-driven functions include lane departure warning, lane keeping assist, lane centering, forward collision warning, automatic emergency braking, following distance monitoring, traffic sign recognition, and automatic high beams. Depending on year and trim, the same module may also support pedestrian or cyclist detection and collision avoidance steering support. Even when radar or ultrasonic sensors are present, many vehicles use sensor fusion, blending inputs, so the camera still helps confirm lanes and classify objects ahead. Because ADAS equipment varies by model year and trim, technicians should verify configuration by VIN, scan for related fault codes, and follow the OEM calibration requirement for the exact repair operation. At Bang AutoGlass, we confirm what ADAS features your Mercedes-Benz Glb is equipped with, inspect the camera mount and trim during replacement, and help coordinate any required windshield camera calibration so safety functions return to factory-level performance. We also review post-install warning indicators, advise on safe-drive time, and keep calibration records with the repair file for easier claims handling.
Static vs Dynamic ADAS Calibration for Mercedes-Benz Glb: When Each Method Applies
Static versus dynamic ADAS calibration describes how the Mercedes-Benz Glb windshield camera is returned to OEM specifications after new glass is installed. Static calibration is performed in a controlled environment using OEM targets, precise measurements, and a diagnostic scan tool. The setup must meet specification, including a level surface, correct target distance and height, centered steering wheel, proper tire pressure, correct ride height, and stable lighting. Dynamic calibration is completed through a prescribed drive cycle, with scan equipment connected while the Mercedes-Benz Glb is driven on clearly marked roads within the required speed range and time window. Weather, visibility, and lane quality matter because the camera needs consistent cues to learn lanes and reference points. Some vehicles require one method, some require both, and others need additional initialization or fault clearing, so guessing is risky. After calibration, a final scan and basic road test help confirm the system is free of related codes and operating normally. Bang AutoGlass completes mobile windshield replacement in about 30 to 45 minutes, requires at least one hour of safe-drive time for urethane cure, and then helps coordinate the correct calibration with verification documentation when available.
Pre-Calibration Requirements: Pre-Scan, DTC Review, and Vehicle Setup Checks
For ADAS calibration on a Mercedes-Benz Glb, the vehicle must match OEM prerequisites or the routine can fail or deliver poor accuracy. We begin with a pre-repair scan (pre-scan) to record module status and capture diagnostic trouble codes (DTCs) that may not illuminate the dash. Stored faults in the forward camera, steering angle, ABS/ESC, or radar-related modules can interrupt calibration after windshield replacement, and the scan helps separate pre-existing issues from repair-related ones. Next, we set the Mercedes-Benz Glb to the required calibration state: correct tire pressure, matching tire sizes, proper ride height, and no alignment or suspension concerns that could tilt camera aim. We control loading by clearing excess cargo and following any OEM fuel-level or weight requirements. Then we verify installation details that affect camera vision: correct windshield type, secure bracket integrity, and a clean camera zone with no haze, stickers, residue, or distortion. Static calibrations demand a level surface and exact target placement; dynamic calibrations require roads with clear lane markings and safe conditions. Bang AutoGlass is mobile, so we can replace your windshield at home or work, often next day. Most installs take 30 to 45 minutes, and we require at least one hour of safe-drive time for adhesive cure before any drive cycle or calibration.
Post-Calibration Safety Checks: Post-Scan Verification, Test Drive, and Documentation
For a Mercedes-Benz Glb, calibration is not the finish line; verified performance is. The post-calibration process starts with a post-scan to confirm the routine recorded as complete and to check for any remaining or newly triggered diagnostic trouble codes (DTCs) in the forward camera and supporting systems such as steering angle and ABS/ESC. The objective is to avoid latent faults that degrade lane guidance, warnings, or braking support. Next, we confirm the camera zone is clean and unobstructed, with no haze, residue, or stickers that can confuse image processing. Interior trim and the camera cover must fit correctly to limit glare, moisture, or vibration. We verify wipers, washer spray pattern, and defroster performance because the camera can only operate as designed if the windshield stays clear. When the OEM requires dynamic calibration, technicians complete the specified drive cycle and validate consistent behavior for lane departure warning, lane keeping assist, adaptive cruise control, and automatic emergency braking on that Mercedes-Benz Glb. Keep pre-scan and post-scan results plus calibration documentation for insurers and your records. Bang AutoGlass provides mobile replacement in 30 to 45 minutes with at least one hour of safe-drive time for adhesive cure, accepts comprehensive insurance, and includes a lifetime workmanship warranty.
OEM-Specific Procedures on Mercedes-Benz Glb: Why Calibration Steps Can Differ by Manufacturer
ADAS procedures are not universal, and Mercedes-Benz Glb calibration steps can vary by manufacturer, model year, and trim. Some OEMs require only static calibration with targets and precise measurements, others require a dynamic calibration drive cycle, and many require both. Acceptable tolerances can include target shape and distance, lighting conditions, floor levelness, steering angle setup, and vehicle loading (fuel level, cargo removal, or specified weight). OEM guidance also covers parts and materials. Automakers often note that windshield optical quality in the camera zone, camera bracket geometry, and specified adhesives can affect how the forward-facing camera reads lane lines and objects. Using the wrong glass, a distorted viewing area, or a compromised mount can lead to inconsistent responses in lane keeping assist, adaptive cruise control, automatic emergency braking, or traffic sign recognition. Many vehicles will not complete calibration if related DTCs, aim errors, alignment issues, or tire-size mismatches are present. At Bang AutoGlass, we do not guess. We verify ADAS equipment for your Mercedes-Benz Glb, reference VIN-specific OEM procedures, and coordinate the correct calibration method and documentation. You still get mobile, often next-day service, typical replacement time of 30 to 45 minutes, at least one hour of safe-drive time for adhesive cure, acceptance of comprehensive insurance, and a lifetime workmanship warranty.
Services
Service Areas
ADAS After Windshield Replacement on Mercedes-Benz Glb: Calibration Basics and Safety Checks
Why ADAS Calibration Matters After Windshield Replacement on Mercedes-Benz Glb
After windshield replacement on a Mercedes-Benz Glb, ADAS calibration is about restoring factory camera aim, not simply clearing warning lights. Modern windshields have specific curvature and a defined viewing area, and the forward camera is mounted to the glass with precise alignment. Changing the glass can introduce small variations in mount position, bracket fit, or urethane cure height that shift the camera perspective. Because the camera helps your Mercedes-Benz Glb judge lane position, closing speed, and object location, even a slight shift can change how driver-assist systems respond. Drivers may notice frequent lane departure alerts, twitchy lane keeping, or adaptive cruise control that behaves inconsistently, and forward collision warning or automatic emergency braking may react later than intended. That is why OEM guidance commonly calls for recalibration when the windshield-mounted camera is disturbed. Bang AutoGlass structures the repair around safety and documentation: mobile windshield replacement can be scheduled as soon as next day, most installs take 30 to 45 minutes, and we require at least one hour of safe-drive time for adhesive cure before calibration driving. If your Mercedes-Benz Glb needs calibration, we explain the requirement, help coordinate the correct method, and provide written records, with acceptance of all insurance companies under comprehensive coverage and a lifetime workmanship warranty.
Which Mercedes-Benz Glb Systems Can Be Affected: Camera-Based ADAS Features and Safety Functions
When customers ask which Mercedes-Benz Glb systems can be affected by windshield replacement, we focus on camera-based ADAS because a single forward-facing camera can support multiple features. Common camera-driven functions include lane departure warning, lane keeping assist, lane centering, forward collision warning, automatic emergency braking, following distance monitoring, traffic sign recognition, and automatic high beams. Depending on year and trim, the same module may also support pedestrian or cyclist detection and collision avoidance steering support. Even when radar or ultrasonic sensors are present, many vehicles use sensor fusion, blending inputs, so the camera still helps confirm lanes and classify objects ahead. Because ADAS equipment varies by model year and trim, technicians should verify configuration by VIN, scan for related fault codes, and follow the OEM calibration requirement for the exact repair operation. At Bang AutoGlass, we confirm what ADAS features your Mercedes-Benz Glb is equipped with, inspect the camera mount and trim during replacement, and help coordinate any required windshield camera calibration so safety functions return to factory-level performance. We also review post-install warning indicators, advise on safe-drive time, and keep calibration records with the repair file for easier claims handling.
Static vs Dynamic ADAS Calibration for Mercedes-Benz Glb: When Each Method Applies
Static versus dynamic ADAS calibration describes how the Mercedes-Benz Glb windshield camera is returned to OEM specifications after new glass is installed. Static calibration is performed in a controlled environment using OEM targets, precise measurements, and a diagnostic scan tool. The setup must meet specification, including a level surface, correct target distance and height, centered steering wheel, proper tire pressure, correct ride height, and stable lighting. Dynamic calibration is completed through a prescribed drive cycle, with scan equipment connected while the Mercedes-Benz Glb is driven on clearly marked roads within the required speed range and time window. Weather, visibility, and lane quality matter because the camera needs consistent cues to learn lanes and reference points. Some vehicles require one method, some require both, and others need additional initialization or fault clearing, so guessing is risky. After calibration, a final scan and basic road test help confirm the system is free of related codes and operating normally. Bang AutoGlass completes mobile windshield replacement in about 30 to 45 minutes, requires at least one hour of safe-drive time for urethane cure, and then helps coordinate the correct calibration with verification documentation when available.
Pre-Calibration Requirements: Pre-Scan, DTC Review, and Vehicle Setup Checks
For ADAS calibration on a Mercedes-Benz Glb, the vehicle must match OEM prerequisites or the routine can fail or deliver poor accuracy. We begin with a pre-repair scan (pre-scan) to record module status and capture diagnostic trouble codes (DTCs) that may not illuminate the dash. Stored faults in the forward camera, steering angle, ABS/ESC, or radar-related modules can interrupt calibration after windshield replacement, and the scan helps separate pre-existing issues from repair-related ones. Next, we set the Mercedes-Benz Glb to the required calibration state: correct tire pressure, matching tire sizes, proper ride height, and no alignment or suspension concerns that could tilt camera aim. We control loading by clearing excess cargo and following any OEM fuel-level or weight requirements. Then we verify installation details that affect camera vision: correct windshield type, secure bracket integrity, and a clean camera zone with no haze, stickers, residue, or distortion. Static calibrations demand a level surface and exact target placement; dynamic calibrations require roads with clear lane markings and safe conditions. Bang AutoGlass is mobile, so we can replace your windshield at home or work, often next day. Most installs take 30 to 45 minutes, and we require at least one hour of safe-drive time for adhesive cure before any drive cycle or calibration.
Post-Calibration Safety Checks: Post-Scan Verification, Test Drive, and Documentation
For a Mercedes-Benz Glb, calibration is not the finish line; verified performance is. The post-calibration process starts with a post-scan to confirm the routine recorded as complete and to check for any remaining or newly triggered diagnostic trouble codes (DTCs) in the forward camera and supporting systems such as steering angle and ABS/ESC. The objective is to avoid latent faults that degrade lane guidance, warnings, or braking support. Next, we confirm the camera zone is clean and unobstructed, with no haze, residue, or stickers that can confuse image processing. Interior trim and the camera cover must fit correctly to limit glare, moisture, or vibration. We verify wipers, washer spray pattern, and defroster performance because the camera can only operate as designed if the windshield stays clear. When the OEM requires dynamic calibration, technicians complete the specified drive cycle and validate consistent behavior for lane departure warning, lane keeping assist, adaptive cruise control, and automatic emergency braking on that Mercedes-Benz Glb. Keep pre-scan and post-scan results plus calibration documentation for insurers and your records. Bang AutoGlass provides mobile replacement in 30 to 45 minutes with at least one hour of safe-drive time for adhesive cure, accepts comprehensive insurance, and includes a lifetime workmanship warranty.
OEM-Specific Procedures on Mercedes-Benz Glb: Why Calibration Steps Can Differ by Manufacturer
ADAS procedures are not universal, and Mercedes-Benz Glb calibration steps can vary by manufacturer, model year, and trim. Some OEMs require only static calibration with targets and precise measurements, others require a dynamic calibration drive cycle, and many require both. Acceptable tolerances can include target shape and distance, lighting conditions, floor levelness, steering angle setup, and vehicle loading (fuel level, cargo removal, or specified weight). OEM guidance also covers parts and materials. Automakers often note that windshield optical quality in the camera zone, camera bracket geometry, and specified adhesives can affect how the forward-facing camera reads lane lines and objects. Using the wrong glass, a distorted viewing area, or a compromised mount can lead to inconsistent responses in lane keeping assist, adaptive cruise control, automatic emergency braking, or traffic sign recognition. Many vehicles will not complete calibration if related DTCs, aim errors, alignment issues, or tire-size mismatches are present. At Bang AutoGlass, we do not guess. We verify ADAS equipment for your Mercedes-Benz Glb, reference VIN-specific OEM procedures, and coordinate the correct calibration method and documentation. You still get mobile, often next-day service, typical replacement time of 30 to 45 minutes, at least one hour of safe-drive time for adhesive cure, acceptance of comprehensive insurance, and a lifetime workmanship warranty.
Enjoy More Relevant Blogs
OEM-Quality Windshield Replacement for Mercedes-Benz Glb: What “Correct Fit” Really Means
OEM-quality windshield replacement for Mercedes-Benz Glb: what correct fit means for moldings and sensors, how it is verified, and why it helps prevent leaks.
How Much Does Windshield Replacement Cost for Mercedes-Benz Glb? Price Drivers, ADAS, and Glass Type
How much does windshield replacement cost for Mercedes-Benz Glb? See ADAS and glass-type price drivers, OEM options, and ways to save—get a quote fast today.
How to Schedule Mobile Windshield Replacement for Mercedes-Benz Glb
Schedule mobile windshield replacement for Mercedes-Benz Glb: quick checklist, what to prepare, where we can work, and how long install and cure take same-day.
Pre-Appointment Checklist: Preparing Mercedes-Benz Glb for Mobile Windshield Replacement
Pre-appointment checklist for Mercedes-Benz Glb mobile windshield replacement: parking and power needs, photos to take, and what to remove for faster install.
Aftercare Essentials: Mercedes-Benz Glb Windshield Replacement Cure Time, Cleaning, and Do’s/Don’ts
Aftercare for Mercedes-Benz Glb windshield replacement: urethane cure time, safe drive-away, cleaning tips, and do's and don'ts to avoid leaks in 48 hours.
Does Insurance Cover Windshield Replacement for Mercedes-Benz Glb? Deductibles, Claim Steps, and What to Ask
Does insurance cover windshield replacement for Mercedes-Benz Glb? Understand deductibles, claim steps, and questions to ask before booking—file with confidence.
Mobile vs In-Shop: The Best Windshield Replacement Option for Mercedes-Benz Glb
Mercedes-Benz Glb windshield replacement: mobile vs in-shop. Compare convenience, site conditions, timing, and quality checks to pick the best option for you.
Repair or Replace? A Practical Windshield Damage Decision Guide for Mercedes-Benz Glb
Repair or replace Mercedes-Benz Glb windshield damage? Use this guide for chip size, crack location, safety limits, cost factors, and when to book service.
Fast Scheduling Guide: Mercedes-Benz Glb Windshield Replacement From Booking to Install
Book Mercedes-Benz Glb windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm