Services
Service Areas
ADAS Calibration Checklist for Mercedes-Benz Slk-Class: Documentation, Verification, and Final Safety Checks
Identify Mercedes-Benz Slk-Class ADAS Systems and OEM Calibration Triggers
Before any ADAS procedure on a Mercedes-Benz Slk-Class, document two items: the systems present and the OEM conditions that mandate calibration. Confirm trim and ADAS package content using VIN/build data, then perform a comprehensive diagnostic scan that lists installed ADAS-related modules and configuration details. In practical terms, validate what controls lane functions (often a forward windshield camera), what controls adaptive cruise and forward collision functions (often front radar), and what supports blind spot or parking features (rear radar, ultrasonics, and additional cameras). Where build data and scan results conflict, defer to OEM service information. Align the calibration plan to the OEM trigger list for the work completed. On a Mercedes-Benz Slk-Class with a windshield-mounted camera, windshield replacement or camera bracket disturbance commonly requires recalibration because small changes in bracket angle, adhesive thickness, or glass curvature can shift aim. Additional triggers include camera/radar removal and installation, bracket or mounting-surface repair, module replacement or programming, wheel alignment or steering-angle resets, tire-size or ride-height changes, and DTCs indicating lost learned values. Connecting the exact trigger to the correct OEM workflow reduces failures, prevents comebacks, and protects Mercedes-Benz Slk-Class safety performance.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
On a Mercedes-Benz Slk-Class, the strongest calibration is the one you can substantiate. Start with a pre-scan to establish a baseline across key systems: camera and radar units, ABS/ESC, steering angle, and related body or gateway modules. Capturing DTCs and system status up front identifies pre-existing faults that can derail calibration and creates a clear before record. Document the repair context in auditable terms. Note the customer complaint and warning indicators, then record VIN, mileage, and the work performed. State why calibration is required: windshield replacement on a Mercedes-Benz Slk-Class with a camera bracket, camera/radar removal and installation, bumper or grille repairs near the radar, alignment or suspension changes, module replacement or programming, or a software update that resets learned values. Capture photos of the windshield and camera bracket, sensor mounting areas, and any damage, contamination, or aftermarket modifications that could affect sensor aim. Complete the packet for verification: attach the full pre-scan output (current, pending, and history codes plus freeze-frame data when available), record scan tool brand and software level, and note the intended routine (static, dynamic, or combined) and prerequisites. Bang AutoGlass works with all carriers when comprehensive coverage applies, and documentation helps reduce claim friction while supporting our lifetime workmanship warranty.
Vehicle Readiness Checklist for Mercedes-Benz Slk-Class: Tires, Alignment, Ride Height, and Sensor/Glass Prep
Successful ADAS calibration starts with putting the Mercedes-Benz Slk-Class into the condition the OEM assumes. Confirm tires and wheels are OEM size/spec, inflated to spec, matched side-to-side, and evenly worn. Rolling-radius or pressure differences can skew steering and speed calculations used for lane functions and adaptive cruise control. Verify alignment before calibration, focusing on toe, thrust angle, and steering angle sensor values; if alignment is out of range, results can be unreliable. Confirm ride height and loading. Remove excess cargo, keep normal operating weight, and meet any OEM fuel-level requirement. Address factors that change sensor geometry, such as lift/level kits, non-OEM wheel/tire packages, damaged suspension parts, or collision damage near sensor mounts. Prepare sensors and glass. On a Mercedes-Benz Slk-Class with a windshield camera, verify the bracket is secure, the correct windshield is installed, and the camera view zone is clean with no haze, residue, stickers, or tint artifacts. Confirm wipers and cowl fitment, ensure radar and ultrasonic sensors are seated and unobstructed, and remove accessories that block sightlines. A ready-to-calibrate Mercedes-Benz Slk-Class reduces failures and supports OEM-compliant results.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
OEM-compliant setup prevents ADAS calibration failures on a Mercedes-Benz Slk-Class. Measure level across the working footprint, including where targets will stand, and keep the area clean so stands do not settle. Set the vehicle reference by establishing centerline and thrust line, centering the steering wheel, and keeping the vehicle straight. Verify OEM-specified space so targets can be positioned at exact distances, offsets, and heights. Stabilize the environment. Avoid sunlight, windshield glare, flicker, deep shadows, rain, dust, and bay traffic that changes lighting. Select the correct OEM targets for the system being calibrated (camera, radar, surround-view) and inspect boards for fading, creases, or contamination. Confirm stands and measurement tools are accurate and locked down. Verify scan tool coverage for the Mercedes-Benz Slk-Class, select the correct routine for year and trim, and record tool and software versions on the work order. Maintain voltage with a battery maintainer. Follow OEM no-touch requirements during static routines: keep doors closed, avoid leaning on the vehicle, and do not enter the cabin unless directed. These disciplines deliver repeatable results and fewer comebacks at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Mercedes-Benz Slk-Class
Return-to-road verification for a Mercedes-Benz Slk-Class starts with proof. Run a post-scan as soon as calibration completes, confirm modules show success, clear any codes created during the routine, and re-scan to confirm no DTCs remain current or pending. Calibration attempts can leave failure or communication codes even when warning lamps turn off, so a clean, documented post-scan is required. Complete any OEM-directed dynamic calibration or validation drive. Follow the stated conditions for lane markings, speed range, duration, and weather or lighting limits. Use roads with clear lane lines and stable traffic flow so the learning cycle can finish. Confirm lane keeping and lane departure respond predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false trigger. Validate blind spot and rear cross-traffic alerts where equipped. If windshield work was performed on the Mercedes-Benz Slk-Class, include cure timing before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and at least one hour of safe drive-away time is recommended for adhesive cure before dynamic driving. Conclude by confirming the instrument cluster is clear. If warnings remain, recheck alignment, tire size, ride height, sensor mounts, and glass fitment, then repeat the OEM calibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Mercedes-Benz Slk-Class
Closeout records protect the driver and the claim after ADAS work on a Mercedes-Benz Slk-Class. Build a packet that can be reviewed later without context. Include the scan tool calibration report with VIN, date/time, routine identification, calibrated modules, and pass or fail outcome. Attach pre-scan and post-scan reports to document DTC status before and after service. Document prerequisites and setup with photos of sensor mounting points and the windshield or camera bracket area, plus images showing target placement when static calibration was performed. Include required measurements or alignment printouts. If the Mercedes-Benz Slk-Class required dynamic calibration or validation driving, record the OEM routine name, conditions met (speed band, duration), and confirmation that no ADAS warnings were present at completion. Log scan tool platform, software version, target or fixture set used, and battery maintainer usage for compliance and reimbursement. Provide the customer a copy with the invoice and guidance if a warning returns. Bang AutoGlass accepts all insurance companies when comprehensive coverage applies, and thorough documentation reduces back-and-forth while supporting our lifetime workmanship warranty. Retain the packet per policy for each Mercedes-Benz Slk-Class.
Services
Service Areas
ADAS Calibration Checklist for Mercedes-Benz Slk-Class: Documentation, Verification, and Final Safety Checks
Identify Mercedes-Benz Slk-Class ADAS Systems and OEM Calibration Triggers
Before any ADAS procedure on a Mercedes-Benz Slk-Class, document two items: the systems present and the OEM conditions that mandate calibration. Confirm trim and ADAS package content using VIN/build data, then perform a comprehensive diagnostic scan that lists installed ADAS-related modules and configuration details. In practical terms, validate what controls lane functions (often a forward windshield camera), what controls adaptive cruise and forward collision functions (often front radar), and what supports blind spot or parking features (rear radar, ultrasonics, and additional cameras). Where build data and scan results conflict, defer to OEM service information. Align the calibration plan to the OEM trigger list for the work completed. On a Mercedes-Benz Slk-Class with a windshield-mounted camera, windshield replacement or camera bracket disturbance commonly requires recalibration because small changes in bracket angle, adhesive thickness, or glass curvature can shift aim. Additional triggers include camera/radar removal and installation, bracket or mounting-surface repair, module replacement or programming, wheel alignment or steering-angle resets, tire-size or ride-height changes, and DTCs indicating lost learned values. Connecting the exact trigger to the correct OEM workflow reduces failures, prevents comebacks, and protects Mercedes-Benz Slk-Class safety performance.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
On a Mercedes-Benz Slk-Class, the strongest calibration is the one you can substantiate. Start with a pre-scan to establish a baseline across key systems: camera and radar units, ABS/ESC, steering angle, and related body or gateway modules. Capturing DTCs and system status up front identifies pre-existing faults that can derail calibration and creates a clear before record. Document the repair context in auditable terms. Note the customer complaint and warning indicators, then record VIN, mileage, and the work performed. State why calibration is required: windshield replacement on a Mercedes-Benz Slk-Class with a camera bracket, camera/radar removal and installation, bumper or grille repairs near the radar, alignment or suspension changes, module replacement or programming, or a software update that resets learned values. Capture photos of the windshield and camera bracket, sensor mounting areas, and any damage, contamination, or aftermarket modifications that could affect sensor aim. Complete the packet for verification: attach the full pre-scan output (current, pending, and history codes plus freeze-frame data when available), record scan tool brand and software level, and note the intended routine (static, dynamic, or combined) and prerequisites. Bang AutoGlass works with all carriers when comprehensive coverage applies, and documentation helps reduce claim friction while supporting our lifetime workmanship warranty.
Vehicle Readiness Checklist for Mercedes-Benz Slk-Class: Tires, Alignment, Ride Height, and Sensor/Glass Prep
Successful ADAS calibration starts with putting the Mercedes-Benz Slk-Class into the condition the OEM assumes. Confirm tires and wheels are OEM size/spec, inflated to spec, matched side-to-side, and evenly worn. Rolling-radius or pressure differences can skew steering and speed calculations used for lane functions and adaptive cruise control. Verify alignment before calibration, focusing on toe, thrust angle, and steering angle sensor values; if alignment is out of range, results can be unreliable. Confirm ride height and loading. Remove excess cargo, keep normal operating weight, and meet any OEM fuel-level requirement. Address factors that change sensor geometry, such as lift/level kits, non-OEM wheel/tire packages, damaged suspension parts, or collision damage near sensor mounts. Prepare sensors and glass. On a Mercedes-Benz Slk-Class with a windshield camera, verify the bracket is secure, the correct windshield is installed, and the camera view zone is clean with no haze, residue, stickers, or tint artifacts. Confirm wipers and cowl fitment, ensure radar and ultrasonic sensors are seated and unobstructed, and remove accessories that block sightlines. A ready-to-calibrate Mercedes-Benz Slk-Class reduces failures and supports OEM-compliant results.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
OEM-compliant setup prevents ADAS calibration failures on a Mercedes-Benz Slk-Class. Measure level across the working footprint, including where targets will stand, and keep the area clean so stands do not settle. Set the vehicle reference by establishing centerline and thrust line, centering the steering wheel, and keeping the vehicle straight. Verify OEM-specified space so targets can be positioned at exact distances, offsets, and heights. Stabilize the environment. Avoid sunlight, windshield glare, flicker, deep shadows, rain, dust, and bay traffic that changes lighting. Select the correct OEM targets for the system being calibrated (camera, radar, surround-view) and inspect boards for fading, creases, or contamination. Confirm stands and measurement tools are accurate and locked down. Verify scan tool coverage for the Mercedes-Benz Slk-Class, select the correct routine for year and trim, and record tool and software versions on the work order. Maintain voltage with a battery maintainer. Follow OEM no-touch requirements during static routines: keep doors closed, avoid leaning on the vehicle, and do not enter the cabin unless directed. These disciplines deliver repeatable results and fewer comebacks at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Mercedes-Benz Slk-Class
Return-to-road verification for a Mercedes-Benz Slk-Class starts with proof. Run a post-scan as soon as calibration completes, confirm modules show success, clear any codes created during the routine, and re-scan to confirm no DTCs remain current or pending. Calibration attempts can leave failure or communication codes even when warning lamps turn off, so a clean, documented post-scan is required. Complete any OEM-directed dynamic calibration or validation drive. Follow the stated conditions for lane markings, speed range, duration, and weather or lighting limits. Use roads with clear lane lines and stable traffic flow so the learning cycle can finish. Confirm lane keeping and lane departure respond predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false trigger. Validate blind spot and rear cross-traffic alerts where equipped. If windshield work was performed on the Mercedes-Benz Slk-Class, include cure timing before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and at least one hour of safe drive-away time is recommended for adhesive cure before dynamic driving. Conclude by confirming the instrument cluster is clear. If warnings remain, recheck alignment, tire size, ride height, sensor mounts, and glass fitment, then repeat the OEM calibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Mercedes-Benz Slk-Class
Closeout records protect the driver and the claim after ADAS work on a Mercedes-Benz Slk-Class. Build a packet that can be reviewed later without context. Include the scan tool calibration report with VIN, date/time, routine identification, calibrated modules, and pass or fail outcome. Attach pre-scan and post-scan reports to document DTC status before and after service. Document prerequisites and setup with photos of sensor mounting points and the windshield or camera bracket area, plus images showing target placement when static calibration was performed. Include required measurements or alignment printouts. If the Mercedes-Benz Slk-Class required dynamic calibration or validation driving, record the OEM routine name, conditions met (speed band, duration), and confirmation that no ADAS warnings were present at completion. Log scan tool platform, software version, target or fixture set used, and battery maintainer usage for compliance and reimbursement. Provide the customer a copy with the invoice and guidance if a warning returns. Bang AutoGlass accepts all insurance companies when comprehensive coverage applies, and thorough documentation reduces back-and-forth while supporting our lifetime workmanship warranty. Retain the packet per policy for each Mercedes-Benz Slk-Class.
Services
Service Areas
ADAS Calibration Checklist for Mercedes-Benz Slk-Class: Documentation, Verification, and Final Safety Checks
Identify Mercedes-Benz Slk-Class ADAS Systems and OEM Calibration Triggers
Before any ADAS procedure on a Mercedes-Benz Slk-Class, document two items: the systems present and the OEM conditions that mandate calibration. Confirm trim and ADAS package content using VIN/build data, then perform a comprehensive diagnostic scan that lists installed ADAS-related modules and configuration details. In practical terms, validate what controls lane functions (often a forward windshield camera), what controls adaptive cruise and forward collision functions (often front radar), and what supports blind spot or parking features (rear radar, ultrasonics, and additional cameras). Where build data and scan results conflict, defer to OEM service information. Align the calibration plan to the OEM trigger list for the work completed. On a Mercedes-Benz Slk-Class with a windshield-mounted camera, windshield replacement or camera bracket disturbance commonly requires recalibration because small changes in bracket angle, adhesive thickness, or glass curvature can shift aim. Additional triggers include camera/radar removal and installation, bracket or mounting-surface repair, module replacement or programming, wheel alignment or steering-angle resets, tire-size or ride-height changes, and DTCs indicating lost learned values. Connecting the exact trigger to the correct OEM workflow reduces failures, prevents comebacks, and protects Mercedes-Benz Slk-Class safety performance.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
On a Mercedes-Benz Slk-Class, the strongest calibration is the one you can substantiate. Start with a pre-scan to establish a baseline across key systems: camera and radar units, ABS/ESC, steering angle, and related body or gateway modules. Capturing DTCs and system status up front identifies pre-existing faults that can derail calibration and creates a clear before record. Document the repair context in auditable terms. Note the customer complaint and warning indicators, then record VIN, mileage, and the work performed. State why calibration is required: windshield replacement on a Mercedes-Benz Slk-Class with a camera bracket, camera/radar removal and installation, bumper or grille repairs near the radar, alignment or suspension changes, module replacement or programming, or a software update that resets learned values. Capture photos of the windshield and camera bracket, sensor mounting areas, and any damage, contamination, or aftermarket modifications that could affect sensor aim. Complete the packet for verification: attach the full pre-scan output (current, pending, and history codes plus freeze-frame data when available), record scan tool brand and software level, and note the intended routine (static, dynamic, or combined) and prerequisites. Bang AutoGlass works with all carriers when comprehensive coverage applies, and documentation helps reduce claim friction while supporting our lifetime workmanship warranty.
Vehicle Readiness Checklist for Mercedes-Benz Slk-Class: Tires, Alignment, Ride Height, and Sensor/Glass Prep
Successful ADAS calibration starts with putting the Mercedes-Benz Slk-Class into the condition the OEM assumes. Confirm tires and wheels are OEM size/spec, inflated to spec, matched side-to-side, and evenly worn. Rolling-radius or pressure differences can skew steering and speed calculations used for lane functions and adaptive cruise control. Verify alignment before calibration, focusing on toe, thrust angle, and steering angle sensor values; if alignment is out of range, results can be unreliable. Confirm ride height and loading. Remove excess cargo, keep normal operating weight, and meet any OEM fuel-level requirement. Address factors that change sensor geometry, such as lift/level kits, non-OEM wheel/tire packages, damaged suspension parts, or collision damage near sensor mounts. Prepare sensors and glass. On a Mercedes-Benz Slk-Class with a windshield camera, verify the bracket is secure, the correct windshield is installed, and the camera view zone is clean with no haze, residue, stickers, or tint artifacts. Confirm wipers and cowl fitment, ensure radar and ultrasonic sensors are seated and unobstructed, and remove accessories that block sightlines. A ready-to-calibrate Mercedes-Benz Slk-Class reduces failures and supports OEM-compliant results.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
OEM-compliant setup prevents ADAS calibration failures on a Mercedes-Benz Slk-Class. Measure level across the working footprint, including where targets will stand, and keep the area clean so stands do not settle. Set the vehicle reference by establishing centerline and thrust line, centering the steering wheel, and keeping the vehicle straight. Verify OEM-specified space so targets can be positioned at exact distances, offsets, and heights. Stabilize the environment. Avoid sunlight, windshield glare, flicker, deep shadows, rain, dust, and bay traffic that changes lighting. Select the correct OEM targets for the system being calibrated (camera, radar, surround-view) and inspect boards for fading, creases, or contamination. Confirm stands and measurement tools are accurate and locked down. Verify scan tool coverage for the Mercedes-Benz Slk-Class, select the correct routine for year and trim, and record tool and software versions on the work order. Maintain voltage with a battery maintainer. Follow OEM no-touch requirements during static routines: keep doors closed, avoid leaning on the vehicle, and do not enter the cabin unless directed. These disciplines deliver repeatable results and fewer comebacks at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Mercedes-Benz Slk-Class
Return-to-road verification for a Mercedes-Benz Slk-Class starts with proof. Run a post-scan as soon as calibration completes, confirm modules show success, clear any codes created during the routine, and re-scan to confirm no DTCs remain current or pending. Calibration attempts can leave failure or communication codes even when warning lamps turn off, so a clean, documented post-scan is required. Complete any OEM-directed dynamic calibration or validation drive. Follow the stated conditions for lane markings, speed range, duration, and weather or lighting limits. Use roads with clear lane lines and stable traffic flow so the learning cycle can finish. Confirm lane keeping and lane departure respond predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false trigger. Validate blind spot and rear cross-traffic alerts where equipped. If windshield work was performed on the Mercedes-Benz Slk-Class, include cure timing before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and at least one hour of safe drive-away time is recommended for adhesive cure before dynamic driving. Conclude by confirming the instrument cluster is clear. If warnings remain, recheck alignment, tire size, ride height, sensor mounts, and glass fitment, then repeat the OEM calibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Mercedes-Benz Slk-Class
Closeout records protect the driver and the claim after ADAS work on a Mercedes-Benz Slk-Class. Build a packet that can be reviewed later without context. Include the scan tool calibration report with VIN, date/time, routine identification, calibrated modules, and pass or fail outcome. Attach pre-scan and post-scan reports to document DTC status before and after service. Document prerequisites and setup with photos of sensor mounting points and the windshield or camera bracket area, plus images showing target placement when static calibration was performed. Include required measurements or alignment printouts. If the Mercedes-Benz Slk-Class required dynamic calibration or validation driving, record the OEM routine name, conditions met (speed band, duration), and confirmation that no ADAS warnings were present at completion. Log scan tool platform, software version, target or fixture set used, and battery maintainer usage for compliance and reimbursement. Provide the customer a copy with the invoice and guidance if a warning returns. Bang AutoGlass accepts all insurance companies when comprehensive coverage applies, and thorough documentation reduces back-and-forth while supporting our lifetime workmanship warranty. Retain the packet per policy for each Mercedes-Benz Slk-Class.
Enjoy More Relevant Blogs
OEM Calibration Requirements for Mercedes-Benz Slk-Class: How to Confirm What Must Be Calibrated
OEM calibration requirements for Mercedes-Benz Slk-Class: how to confirm what must be calibrated after repairs, what triggers recalibration, and what proof to ask for.
Pre- and Post-Calibration Scans for Mercedes-Benz Slk-Class: Proving Systems Are Set Correctly
Pre- and post-calibration scans for Mercedes-Benz Slk-Class: see why scans matter, what they verify, and how reports prove ADAS systems are set correctly after service.
ADAS Warning Lights on Mercedes-Benz Slk-Class: When Calibration Is the Fix and When It’s Not
ADAS warning lights on your Mercedes-Benz Slk-Class? Learn when calibration fixes lane assist or AEB issues, when it will not, and what to check next. Schedule help.
Do You Need ADAS Calibration for Mercedes-Benz Slk-Class After a Wheel Alignment, Suspension Work, or a Minor Collision?
Do you need ADAS calibration for a Mercedes-Benz Slk-Class after alignment, suspension work, or a minor collision? Signs, timelines, safety risks, and costs today.
How to Schedule ADAS Calibration for Mercedes-Benz Slk-Class After Windshield Replacement
Schedule ADAS calibration for Mercedes-Benz Slk-Class after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
Mobile ADAS Calibration for Mercedes-Benz Slk-Class: What to Expect On-Site and Why Setup Matters
Mobile ADAS calibration for Mercedes-Benz Slk-Class: what to expect on-site, space and lighting needs, and why setup and verification matter after repairs today.
How Much Does ADAS Calibration Cost for Mercedes-Benz Slk-Class? What Drives Pricing and What Insurance Typically Covers
How much does ADAS calibration cost for a Mercedes-Benz Slk-Class? Learn pricing drivers, camera vs radar needs, labor time, and what insurance typically covers.
Static vs Dynamic ADAS Calibration for Mercedes-Benz Slk-Class: What the Difference Means
Static vs dynamic ADAS calibration for Mercedes-Benz Slk-Class: key differences, when each is required, how long it takes, and what affects accuracy for safety.
Camera Calibration for Mercedes-Benz Slk-Class: Lane Assist and Forward Collision Accuracy Explained
Need camera calibration for your Mercedes-Benz Slk-Class? See how calibration affects lane assist and forward collision accuracy after windshield service or repairs.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm