Services
Service Areas
ADAS After Windshield Replacement on Mitsubishi Airtrek: Calibration Basics and Safety Checks
Why ADAS Calibration Matters After Windshield Replacement on Mitsubishi Airtrek
On many late-model Mitsubishi Airtrek vehicles, the windshield is an engineered part of the Advanced Driver Assistance Systems (ADAS) package, not just a sheet of glass. A forward-facing camera looks through a defined viewing area and is mounted to the windshield within tight OEM tolerances. After windshield replacement, small differences in glass seating, camera bracket fit, urethane bead height, or the optical properties of the new windshield can shift the camera field of view. That shift can change how your Mitsubishi Airtrek reads lane markings, vehicles, and pedestrians, which is why OEM procedures commonly require windshield camera calibration after glass removal. Skipping calibration can lead to false lane departure alerts, inconsistent lane keeping, adaptive cruise control spacing errors, or automatic emergency braking that reacts late. Bang AutoGlass prioritizes safety and convenience: we offer mobile windshield replacement as soon as next day, with most installations taking 30 to 45 minutes plus at least one hour of safe-drive time for adhesive cure. If your Mitsubishi Airtrek has a windshield camera, we explain calibration needs up front, help coordinate the correct method, and provide documentation for you and your insurer. We accept all insurance companies when you have comprehensive coverage and include a lifetime workmanship warranty.
Which Mitsubishi Airtrek Systems Can Be Affected: Camera-Based ADAS Features and Safety Functions
A single forward-facing camera on a Mitsubishi Airtrek can power several ADAS features at once, so windshield work can influence systems that seem unrelated. Camera-driven functions often include lane departure warning, lane keeping assist, lane centering, forward collision warning, and automatic emergency braking. Many trims also use the camera for following distance monitoring, traffic sign recognition, intelligent high beams, and pedestrian or cyclist alerts. Some Mitsubishi Airtrek configurations add rain or light sensors and other modules near the mirror area, which can affect wiper and headlight automation after reassembly. Even when radar or ultrasonic sensors are present, sensor fusion blends radar range with camera classification and lane context, so a camera that is slightly out of spec can change overall system decisions. Because ADAS packages vary, technicians should verify equipment by VIN and confirm the OEM calibration requirement for the exact repair operation. At Bang AutoGlass, we verify what ADAS features your Mitsubishi Airtrek has, inspect the camera mount and related hardware during replacement, and help coordinate any required windshield camera calibration to restore consistent, factory-level performance. We also confirm mirror-area modules and camera covers are reinstalled to OEM fit and finish before calibration.
Static vs Dynamic ADAS Calibration for Mitsubishi Airtrek: When Each Method Applies
After windshield replacement, ADAS calibration on a Mitsubishi Airtrek typically falls into two categories: static and dynamic. Static calibration is performed in a controlled bay using OEM targets and precise measurements, with a scan tool initiating the routine. The vehicle must be set up exactly as specified, including level floor, correct target distance and height, centered steering wheel, proper tire pressure, correct ride height, and stable lighting. Dynamic calibration is completed through a prescribed road drive. With diagnostic equipment connected, a technician drives the Mitsubishi Airtrek on clearly marked roads within the defined speed range and time window so the camera can learn lane lines, signage, and real-world visual cues. Weather, visibility, and lane quality affect completion and confidence. Some vehicles require one method, others require both, and some need additional initialization or fault clearing. Bang AutoGlass completes mobile windshield replacement in about 30 to 45 minutes, requires at least one hour of safe-drive time for urethane cure, and then helps coordinate the correct calibration, providing verification documentation when available for your records and insurer. After calibration, a final scan and basic road test help confirm the ADAS system is operating normally and free of related codes.
Pre-Calibration Requirements: Pre-Scan, DTC Review, and Vehicle Setup Checks
Before any ADAS calibration on a Mitsubishi Airtrek, the setup drives the outcome. We start with a pre-repair diagnostic scan (pre-scan) to document baseline condition, capture active/stored/pending diagnostic trouble codes (DTCs), and flag issues that can block calibration even when no warning light is on. After replacement, we confirm the vehicle is in an OEM-ready state and that any pre-existing faults are identified before calibration begins. OEM checks then focus on vehicle stance and visibility. The Mitsubishi Airtrek should be at correct ride height with proper tire pressure, matching tire sizes, and no alignment, steering, or suspension concerns that could change camera aim. Excess cargo and uneven loading can shift attitude, so we keep the cabin and trunk clear. We also inspect the camera mount/bracket, verify the correct windshield type, and ensure the camera viewing zone is clean and distortion-free. Static calibration requires a level surface and precise target placement; dynamic calibration requires safe roads with clear lane markings. Bang AutoGlass provides mobile windshield replacement at home or work, often next day. Most installs take 30 to 45 minutes, and we require at least one hour of safe-drive time for adhesive cure before any road procedure or calibration drive.
Post-Calibration Safety Checks: Post-Scan Verification, Test Drive, and Documentation
For a Mitsubishi Airtrek, calibration is not the finish line; verified performance is. The post-calibration process starts with a post-scan to confirm the routine recorded as complete and to check for any remaining or newly triggered diagnostic trouble codes (DTCs) in the forward camera and supporting systems such as steering angle and ABS/ESC. The objective is to avoid latent faults that degrade lane guidance, warnings, or braking support. Next, we confirm the camera zone is clean and unobstructed, with no haze, residue, or stickers that can confuse image processing. Interior trim and the camera cover must fit correctly to limit glare, moisture, or vibration. We verify wipers, washer spray pattern, and defroster performance because the camera can only operate as designed if the windshield stays clear. When the OEM requires dynamic calibration, technicians complete the specified drive cycle and validate consistent behavior for lane departure warning, lane keeping assist, adaptive cruise control, and automatic emergency braking on that Mitsubishi Airtrek. Keep pre-scan and post-scan results plus calibration documentation for insurers and your records. Bang AutoGlass provides mobile replacement in 30 to 45 minutes with at least one hour of safe-drive time for adhesive cure, accepts comprehensive insurance, and includes a lifetime workmanship warranty.
OEM-Specific Procedures on Mitsubishi Airtrek: Why Calibration Steps Can Differ by Manufacturer
ADAS procedures are not universal, and Mitsubishi Airtrek calibration steps can vary by manufacturer, model year, and trim. Some OEMs require only static calibration with targets and precise measurements, others require a dynamic calibration drive cycle, and many require both. Acceptable tolerances can include target shape and distance, lighting conditions, floor levelness, steering angle setup, and vehicle loading (fuel level, cargo removal, or specified weight). OEM guidance also covers parts and materials. Automakers often note that windshield optical quality in the camera zone, camera bracket geometry, and specified adhesives can affect how the forward-facing camera reads lane lines and objects. Using the wrong glass, a distorted viewing area, or a compromised mount can lead to inconsistent responses in lane keeping assist, adaptive cruise control, automatic emergency braking, or traffic sign recognition. Many vehicles will not complete calibration if related DTCs, aim errors, alignment issues, or tire-size mismatches are present. At Bang AutoGlass, we do not guess. We verify ADAS equipment for your Mitsubishi Airtrek, reference VIN-specific OEM procedures, and coordinate the correct calibration method and documentation. You still get mobile, often next-day service, typical replacement time of 30 to 45 minutes, at least one hour of safe-drive time for adhesive cure, acceptance of comprehensive insurance, and a lifetime workmanship warranty.
Services
Service Areas
ADAS After Windshield Replacement on Mitsubishi Airtrek: Calibration Basics and Safety Checks
Why ADAS Calibration Matters After Windshield Replacement on Mitsubishi Airtrek
On many late-model Mitsubishi Airtrek vehicles, the windshield is an engineered part of the Advanced Driver Assistance Systems (ADAS) package, not just a sheet of glass. A forward-facing camera looks through a defined viewing area and is mounted to the windshield within tight OEM tolerances. After windshield replacement, small differences in glass seating, camera bracket fit, urethane bead height, or the optical properties of the new windshield can shift the camera field of view. That shift can change how your Mitsubishi Airtrek reads lane markings, vehicles, and pedestrians, which is why OEM procedures commonly require windshield camera calibration after glass removal. Skipping calibration can lead to false lane departure alerts, inconsistent lane keeping, adaptive cruise control spacing errors, or automatic emergency braking that reacts late. Bang AutoGlass prioritizes safety and convenience: we offer mobile windshield replacement as soon as next day, with most installations taking 30 to 45 minutes plus at least one hour of safe-drive time for adhesive cure. If your Mitsubishi Airtrek has a windshield camera, we explain calibration needs up front, help coordinate the correct method, and provide documentation for you and your insurer. We accept all insurance companies when you have comprehensive coverage and include a lifetime workmanship warranty.
Which Mitsubishi Airtrek Systems Can Be Affected: Camera-Based ADAS Features and Safety Functions
A single forward-facing camera on a Mitsubishi Airtrek can power several ADAS features at once, so windshield work can influence systems that seem unrelated. Camera-driven functions often include lane departure warning, lane keeping assist, lane centering, forward collision warning, and automatic emergency braking. Many trims also use the camera for following distance monitoring, traffic sign recognition, intelligent high beams, and pedestrian or cyclist alerts. Some Mitsubishi Airtrek configurations add rain or light sensors and other modules near the mirror area, which can affect wiper and headlight automation after reassembly. Even when radar or ultrasonic sensors are present, sensor fusion blends radar range with camera classification and lane context, so a camera that is slightly out of spec can change overall system decisions. Because ADAS packages vary, technicians should verify equipment by VIN and confirm the OEM calibration requirement for the exact repair operation. At Bang AutoGlass, we verify what ADAS features your Mitsubishi Airtrek has, inspect the camera mount and related hardware during replacement, and help coordinate any required windshield camera calibration to restore consistent, factory-level performance. We also confirm mirror-area modules and camera covers are reinstalled to OEM fit and finish before calibration.
Static vs Dynamic ADAS Calibration for Mitsubishi Airtrek: When Each Method Applies
After windshield replacement, ADAS calibration on a Mitsubishi Airtrek typically falls into two categories: static and dynamic. Static calibration is performed in a controlled bay using OEM targets and precise measurements, with a scan tool initiating the routine. The vehicle must be set up exactly as specified, including level floor, correct target distance and height, centered steering wheel, proper tire pressure, correct ride height, and stable lighting. Dynamic calibration is completed through a prescribed road drive. With diagnostic equipment connected, a technician drives the Mitsubishi Airtrek on clearly marked roads within the defined speed range and time window so the camera can learn lane lines, signage, and real-world visual cues. Weather, visibility, and lane quality affect completion and confidence. Some vehicles require one method, others require both, and some need additional initialization or fault clearing. Bang AutoGlass completes mobile windshield replacement in about 30 to 45 minutes, requires at least one hour of safe-drive time for urethane cure, and then helps coordinate the correct calibration, providing verification documentation when available for your records and insurer. After calibration, a final scan and basic road test help confirm the ADAS system is operating normally and free of related codes.
Pre-Calibration Requirements: Pre-Scan, DTC Review, and Vehicle Setup Checks
Before any ADAS calibration on a Mitsubishi Airtrek, the setup drives the outcome. We start with a pre-repair diagnostic scan (pre-scan) to document baseline condition, capture active/stored/pending diagnostic trouble codes (DTCs), and flag issues that can block calibration even when no warning light is on. After replacement, we confirm the vehicle is in an OEM-ready state and that any pre-existing faults are identified before calibration begins. OEM checks then focus on vehicle stance and visibility. The Mitsubishi Airtrek should be at correct ride height with proper tire pressure, matching tire sizes, and no alignment, steering, or suspension concerns that could change camera aim. Excess cargo and uneven loading can shift attitude, so we keep the cabin and trunk clear. We also inspect the camera mount/bracket, verify the correct windshield type, and ensure the camera viewing zone is clean and distortion-free. Static calibration requires a level surface and precise target placement; dynamic calibration requires safe roads with clear lane markings. Bang AutoGlass provides mobile windshield replacement at home or work, often next day. Most installs take 30 to 45 minutes, and we require at least one hour of safe-drive time for adhesive cure before any road procedure or calibration drive.
Post-Calibration Safety Checks: Post-Scan Verification, Test Drive, and Documentation
For a Mitsubishi Airtrek, calibration is not the finish line; verified performance is. The post-calibration process starts with a post-scan to confirm the routine recorded as complete and to check for any remaining or newly triggered diagnostic trouble codes (DTCs) in the forward camera and supporting systems such as steering angle and ABS/ESC. The objective is to avoid latent faults that degrade lane guidance, warnings, or braking support. Next, we confirm the camera zone is clean and unobstructed, with no haze, residue, or stickers that can confuse image processing. Interior trim and the camera cover must fit correctly to limit glare, moisture, or vibration. We verify wipers, washer spray pattern, and defroster performance because the camera can only operate as designed if the windshield stays clear. When the OEM requires dynamic calibration, technicians complete the specified drive cycle and validate consistent behavior for lane departure warning, lane keeping assist, adaptive cruise control, and automatic emergency braking on that Mitsubishi Airtrek. Keep pre-scan and post-scan results plus calibration documentation for insurers and your records. Bang AutoGlass provides mobile replacement in 30 to 45 minutes with at least one hour of safe-drive time for adhesive cure, accepts comprehensive insurance, and includes a lifetime workmanship warranty.
OEM-Specific Procedures on Mitsubishi Airtrek: Why Calibration Steps Can Differ by Manufacturer
ADAS procedures are not universal, and Mitsubishi Airtrek calibration steps can vary by manufacturer, model year, and trim. Some OEMs require only static calibration with targets and precise measurements, others require a dynamic calibration drive cycle, and many require both. Acceptable tolerances can include target shape and distance, lighting conditions, floor levelness, steering angle setup, and vehicle loading (fuel level, cargo removal, or specified weight). OEM guidance also covers parts and materials. Automakers often note that windshield optical quality in the camera zone, camera bracket geometry, and specified adhesives can affect how the forward-facing camera reads lane lines and objects. Using the wrong glass, a distorted viewing area, or a compromised mount can lead to inconsistent responses in lane keeping assist, adaptive cruise control, automatic emergency braking, or traffic sign recognition. Many vehicles will not complete calibration if related DTCs, aim errors, alignment issues, or tire-size mismatches are present. At Bang AutoGlass, we do not guess. We verify ADAS equipment for your Mitsubishi Airtrek, reference VIN-specific OEM procedures, and coordinate the correct calibration method and documentation. You still get mobile, often next-day service, typical replacement time of 30 to 45 minutes, at least one hour of safe-drive time for adhesive cure, acceptance of comprehensive insurance, and a lifetime workmanship warranty.
Services
Service Areas
ADAS After Windshield Replacement on Mitsubishi Airtrek: Calibration Basics and Safety Checks
Why ADAS Calibration Matters After Windshield Replacement on Mitsubishi Airtrek
On many late-model Mitsubishi Airtrek vehicles, the windshield is an engineered part of the Advanced Driver Assistance Systems (ADAS) package, not just a sheet of glass. A forward-facing camera looks through a defined viewing area and is mounted to the windshield within tight OEM tolerances. After windshield replacement, small differences in glass seating, camera bracket fit, urethane bead height, or the optical properties of the new windshield can shift the camera field of view. That shift can change how your Mitsubishi Airtrek reads lane markings, vehicles, and pedestrians, which is why OEM procedures commonly require windshield camera calibration after glass removal. Skipping calibration can lead to false lane departure alerts, inconsistent lane keeping, adaptive cruise control spacing errors, or automatic emergency braking that reacts late. Bang AutoGlass prioritizes safety and convenience: we offer mobile windshield replacement as soon as next day, with most installations taking 30 to 45 minutes plus at least one hour of safe-drive time for adhesive cure. If your Mitsubishi Airtrek has a windshield camera, we explain calibration needs up front, help coordinate the correct method, and provide documentation for you and your insurer. We accept all insurance companies when you have comprehensive coverage and include a lifetime workmanship warranty.
Which Mitsubishi Airtrek Systems Can Be Affected: Camera-Based ADAS Features and Safety Functions
A single forward-facing camera on a Mitsubishi Airtrek can power several ADAS features at once, so windshield work can influence systems that seem unrelated. Camera-driven functions often include lane departure warning, lane keeping assist, lane centering, forward collision warning, and automatic emergency braking. Many trims also use the camera for following distance monitoring, traffic sign recognition, intelligent high beams, and pedestrian or cyclist alerts. Some Mitsubishi Airtrek configurations add rain or light sensors and other modules near the mirror area, which can affect wiper and headlight automation after reassembly. Even when radar or ultrasonic sensors are present, sensor fusion blends radar range with camera classification and lane context, so a camera that is slightly out of spec can change overall system decisions. Because ADAS packages vary, technicians should verify equipment by VIN and confirm the OEM calibration requirement for the exact repair operation. At Bang AutoGlass, we verify what ADAS features your Mitsubishi Airtrek has, inspect the camera mount and related hardware during replacement, and help coordinate any required windshield camera calibration to restore consistent, factory-level performance. We also confirm mirror-area modules and camera covers are reinstalled to OEM fit and finish before calibration.
Static vs Dynamic ADAS Calibration for Mitsubishi Airtrek: When Each Method Applies
After windshield replacement, ADAS calibration on a Mitsubishi Airtrek typically falls into two categories: static and dynamic. Static calibration is performed in a controlled bay using OEM targets and precise measurements, with a scan tool initiating the routine. The vehicle must be set up exactly as specified, including level floor, correct target distance and height, centered steering wheel, proper tire pressure, correct ride height, and stable lighting. Dynamic calibration is completed through a prescribed road drive. With diagnostic equipment connected, a technician drives the Mitsubishi Airtrek on clearly marked roads within the defined speed range and time window so the camera can learn lane lines, signage, and real-world visual cues. Weather, visibility, and lane quality affect completion and confidence. Some vehicles require one method, others require both, and some need additional initialization or fault clearing. Bang AutoGlass completes mobile windshield replacement in about 30 to 45 minutes, requires at least one hour of safe-drive time for urethane cure, and then helps coordinate the correct calibration, providing verification documentation when available for your records and insurer. After calibration, a final scan and basic road test help confirm the ADAS system is operating normally and free of related codes.
Pre-Calibration Requirements: Pre-Scan, DTC Review, and Vehicle Setup Checks
Before any ADAS calibration on a Mitsubishi Airtrek, the setup drives the outcome. We start with a pre-repair diagnostic scan (pre-scan) to document baseline condition, capture active/stored/pending diagnostic trouble codes (DTCs), and flag issues that can block calibration even when no warning light is on. After replacement, we confirm the vehicle is in an OEM-ready state and that any pre-existing faults are identified before calibration begins. OEM checks then focus on vehicle stance and visibility. The Mitsubishi Airtrek should be at correct ride height with proper tire pressure, matching tire sizes, and no alignment, steering, or suspension concerns that could change camera aim. Excess cargo and uneven loading can shift attitude, so we keep the cabin and trunk clear. We also inspect the camera mount/bracket, verify the correct windshield type, and ensure the camera viewing zone is clean and distortion-free. Static calibration requires a level surface and precise target placement; dynamic calibration requires safe roads with clear lane markings. Bang AutoGlass provides mobile windshield replacement at home or work, often next day. Most installs take 30 to 45 minutes, and we require at least one hour of safe-drive time for adhesive cure before any road procedure or calibration drive.
Post-Calibration Safety Checks: Post-Scan Verification, Test Drive, and Documentation
For a Mitsubishi Airtrek, calibration is not the finish line; verified performance is. The post-calibration process starts with a post-scan to confirm the routine recorded as complete and to check for any remaining or newly triggered diagnostic trouble codes (DTCs) in the forward camera and supporting systems such as steering angle and ABS/ESC. The objective is to avoid latent faults that degrade lane guidance, warnings, or braking support. Next, we confirm the camera zone is clean and unobstructed, with no haze, residue, or stickers that can confuse image processing. Interior trim and the camera cover must fit correctly to limit glare, moisture, or vibration. We verify wipers, washer spray pattern, and defroster performance because the camera can only operate as designed if the windshield stays clear. When the OEM requires dynamic calibration, technicians complete the specified drive cycle and validate consistent behavior for lane departure warning, lane keeping assist, adaptive cruise control, and automatic emergency braking on that Mitsubishi Airtrek. Keep pre-scan and post-scan results plus calibration documentation for insurers and your records. Bang AutoGlass provides mobile replacement in 30 to 45 minutes with at least one hour of safe-drive time for adhesive cure, accepts comprehensive insurance, and includes a lifetime workmanship warranty.
OEM-Specific Procedures on Mitsubishi Airtrek: Why Calibration Steps Can Differ by Manufacturer
ADAS procedures are not universal, and Mitsubishi Airtrek calibration steps can vary by manufacturer, model year, and trim. Some OEMs require only static calibration with targets and precise measurements, others require a dynamic calibration drive cycle, and many require both. Acceptable tolerances can include target shape and distance, lighting conditions, floor levelness, steering angle setup, and vehicle loading (fuel level, cargo removal, or specified weight). OEM guidance also covers parts and materials. Automakers often note that windshield optical quality in the camera zone, camera bracket geometry, and specified adhesives can affect how the forward-facing camera reads lane lines and objects. Using the wrong glass, a distorted viewing area, or a compromised mount can lead to inconsistent responses in lane keeping assist, adaptive cruise control, automatic emergency braking, or traffic sign recognition. Many vehicles will not complete calibration if related DTCs, aim errors, alignment issues, or tire-size mismatches are present. At Bang AutoGlass, we do not guess. We verify ADAS equipment for your Mitsubishi Airtrek, reference VIN-specific OEM procedures, and coordinate the correct calibration method and documentation. You still get mobile, often next-day service, typical replacement time of 30 to 45 minutes, at least one hour of safe-drive time for adhesive cure, acceptance of comprehensive insurance, and a lifetime workmanship warranty.
Enjoy More Relevant Blogs
Repair or Replace? A Practical Windshield Damage Decision Guide for Mitsubishi Airtrek
Repair or replace Mitsubishi Airtrek windshield damage? Use this guide for chip size, crack location, safety limits, cost factors, and when to book service.
Does Insurance Cover Windshield Replacement for Mitsubishi Airtrek? Deductibles, Claim Steps, and What to Ask
Does insurance cover windshield replacement for Mitsubishi Airtrek? Understand deductibles, claim steps, and questions to ask before booking—file with confidence.
How Much Does Windshield Replacement Cost for Mitsubishi Airtrek? Price Drivers, ADAS, and Glass Type
How much does windshield replacement cost for Mitsubishi Airtrek? See ADAS and glass-type price drivers, OEM options, and ways to save—get a quote fast today.
OEM-Quality Windshield Replacement for Mitsubishi Airtrek: What “Correct Fit” Really Means
OEM-quality windshield replacement for Mitsubishi Airtrek: what correct fit means for moldings and sensors, how it is verified, and why it helps prevent leaks.
Aftercare Essentials: Mitsubishi Airtrek Windshield Replacement Cure Time, Cleaning, and Do’s/Don’ts
Aftercare for Mitsubishi Airtrek windshield replacement: urethane cure time, safe drive-away, cleaning tips, and do's and don'ts to avoid leaks in 48 hours.
Mobile vs In-Shop: The Best Windshield Replacement Option for Mitsubishi Airtrek
Mitsubishi Airtrek windshield replacement: mobile vs in-shop. Compare convenience, site conditions, timing, and quality checks to pick the best option for you.
Fast Scheduling Guide: Mitsubishi Airtrek Windshield Replacement From Booking to Install
Book Mitsubishi Airtrek windshield replacement fast. See scheduling steps, what to prep, install timing, and when you can safely drive away. Get a quote today.
Pre-Appointment Checklist: Preparing Mitsubishi Airtrek for Mobile Windshield Replacement
Pre-appointment checklist for Mitsubishi Airtrek mobile windshield replacement: parking and power needs, photos to take, and what to remove for faster install.
How to Schedule Mobile Windshield Replacement for Mitsubishi Airtrek
Schedule mobile windshield replacement for Mitsubishi Airtrek: quick checklist, what to prepare, where we can work, and how long install and cure take same-day.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm