Services
Service Areas
OEM-Quality Sunroof Glass Replacement for Pontiac Trans Sport: DOT Markings and FMVSS 205 Explained
What FMVSS 205 Means for Pontiac Trans Sport Sunroof and Panoramic Roof Glass
FMVSS 205 is the U.S. compliance baseline for automotive safety glazing, including sunroof and panoramic roof glass. The regulation (49 CFR 571.205) incorporates ANSI/SAE Z26.1 for performance categories and the etched certification marks required on compliant glass. For your Pontiac Trans Sport, the goal is straightforward: replacement roof glass should provide clear optics, tolerate heat and weather exposure, and break in a controlled, safety-focused manner. For OEM-quality Pontiac Trans Sport roof-glass replacement, match the factory build and markings—not appearance alone. The correct panel should match the original construction (tempered or laminated), carry the proper AS rating for roof placement, and include a valid DOT code plus the other FMVSS 205/ANSI Z26.1 identifiers. When those details align, you are more likely to match thickness, tint tone, and edge finish so the roof system seals and operates properly. Bang AutoGlass photographs your existing stamp, verifies AS classification and construction, and sources an FMVSS-compliant OEM-quality match before scheduling mobile installation. Many jobs finish in 30–45 minutes; allow about one hour of cure time where bonding applies. We back our work with a lifetime workmanship warranty and coordinate with insurance when comprehensive coverage applies.
How to Read the Sunroof Glass Stamp: DOT Symbol, Manufacturer Code, and Required Marks
The stamp etched into your Pontiac Trans Sport sunroof or panoramic roof glass functions as its compliance label. Knowing what it means helps you verify you are comparing like-for-like parts and strengthens documentation for a claim. Start with the “DOT” marking. Under FMVSS 205, prime glazing manufacturers add DOT plus a manufacturer number assigned by NHTSA, linking the panel to the company that certified it as U.S. motor-vehicle safety glazing. Then confirm the AS classification (AS1, AS2, AS3, etc.) from ANSI/SAE Z26.1. These codes align with tested performance requirements and allowable installation locations. Windshields are often AS1, while Pontiac Trans Sport roof panels are commonly AS2 or AS3 depending on factory tint and design. Many stamps also call out construction—“TEMPERED” or “LAMINATED”—and may include a logo, an “M” model code, production date/batch symbols, and indicators for coatings or privacy tint. You might also see international approvals like an “E” mark with “43R” (UNECE R43). That can be legitimate, but the replacement should still match your original DOT/AS details, tint cues, and construction. Bang AutoGlass photographs the stamp, verifies the markings, and sources an OEM-quality match through mobile service.
AS Ratings and Safety Glazing Types: What the Markings Indicate for Roof Glass
On your Pontiac Trans Sport, the “AS” code etched on the sunroof or panoramic roof glass is the safety-glazing classification from ANSI/SAE Z26.1, which FMVSS 205 incorporates. AS codes indicate the performance category the glass was tested to and where it is intended to be installed. AS1 is typically used for windshields because it aligns with stricter optical and light-transmission requirements, while roof glass is commonly marked AS2 or AS3 based on vehicle design and factory tint. The stamp also identifies construction. Tempered safety glass is heat-treated and usually fractures into many small pieces to reduce sharp shards. Laminated safety glass uses an interlayer that helps retain fragments; depending on the build, it can improve retention, reduce noise, and support UV or solar-control features. Because roof systems vary by trim and model year, OEM-quality Pontiac Trans Sport roof-glass replacement means matching the original construction and markings, not guessing. Why it matters: AS rating, tint category, and glass type affect glare, heat rejection, break behavior, and overall compliance. Bang AutoGlass verifies the AS code and whether the panel is tempered or laminated, then sources an OEM-quality, FMVSS 205-compliant match for your Pontiac Trans Sport sunroof or panoramic roof replacement.
OEM-Quality Match for Pontiac Trans Sport: Tint, Coatings, Hardware, and Sensor Compatibility
Getting an OEM-quality match for Pontiac Trans Sport roof glass is about more than "it fits." Sunroof glass replacement and panoramic roof glass replacement should match factory curvature, thickness, and safety-glazing construction, plus the details that affect comfort and appearance: tint tone, UV filtration, and solar-control coatings that manage infrared heat and glare. When those specs are off, the roof can look two-tone, show mild distortion, or feel noticeably hotter in direct sun. Edge engineering matters too. The ceramic frit band and dot matrix create a consistent bonding surface, protect urethane from UV, and hide the bond line for a clean OEM finish. Many panels also include encapsulation, brackets, locating tabs, and seals that set panel height so the tilt/slide mechanism and sunshade track operate smoothly. Some Pontiac Trans Sport configurations add printed antenna elements or embedded features that must be matched. At Bang AutoGlass, we verify the glass stamp and DOT markings, and we confirm the panel is certified to FMVSS 205 where applicable. Then we source a verified OEM-quality match for your Pontiac Trans Sport and install it via fully mobile service, often as soon as next day, backed by a lifetime workmanship warranty.
Installation Standards That Protect the Result: Bond Prep, Adhesive Choice, and AGRSS Best Practices
The difference between installed and installed correctly is process control. For Pontiac Trans Sport sunroof and panoramic roof glass, installation standards prevent leaks, wind noise, rattles, and premature seal failure. A high-quality panel still depends on correct removal technique, meticulous surface preparation, and the adhesive or mechanical retention method specified for the roof system. We protect the cabin, remove the damaged panel safely, and inspect the aperture, seals, and mounting points so the replacement can sit at the proper OEM height. Surface prep is mandatory. The bond area must be clean, dry, and free of oils, glass dust, and residue that reduce adhesion. Where urethane bonding is used, old urethane is managed to a uniform, stable base as appropriate, and any bare metal or corrosion is treated so the adhesive has a reliable substrate. When required, we apply the correct activator and primer sequence to ensure compatible chemical bonding and UV protection at the bond line. Adhesive handling matters too; automotive urethanes cure predictably only when used per spec. AGRSS provides a benchmark for safe removal, proper prep, adhesive handling, and verification. Bang AutoGlass follows these best practices on every mobile roof-glass job and provides aftercare guidance, including recommended cure time before drive-away, often at least one hour when bonding applies.
Post-Install Verification: Fit, Leak/Wind Noise Checks, and Documentation for Pontiac Trans Sport
Verification is what separates a quick glass swap from a reliable Pontiac Trans Sport sunroof or panoramic roof repair. After installation, we confirm the panel sits at the correct OEM height and perimeter gaps are uniform. Seals should compress evenly, and trim should sit cleanly without lifting, pinching, or misalignment. We recheck mounts, locating tabs, and fasteners so the glass is not under torsional stress and surrounding components are not forced out of position. We then run the roof system through its full operating range, including vent, open, close, and any express functions, plus sunshade movement where equipped. Many roof modules require initialization after service so the motor establishes end stops and anti-pinch parameters; skipping this can cause hesitation, reversing, or a roof that will not fully close. We verify normal operation and listen for abnormal noise that can indicate misalignment or seal interference. To prevent leaks and callbacks, we perform a controlled water test to confirm water routes into the tray and exits through the drains rather than entering the cabin or pooling at corners. We then share aftercare guidance, recommended cure time where bonding applies, and warranty details. Bang AutoGlass supports the work with a lifetime workmanship warranty and can coordinate with insurance when comprehensive coverage applies.
Services
Service Areas
OEM-Quality Sunroof Glass Replacement for Pontiac Trans Sport: DOT Markings and FMVSS 205 Explained
What FMVSS 205 Means for Pontiac Trans Sport Sunroof and Panoramic Roof Glass
FMVSS 205 is the U.S. compliance baseline for automotive safety glazing, including sunroof and panoramic roof glass. The regulation (49 CFR 571.205) incorporates ANSI/SAE Z26.1 for performance categories and the etched certification marks required on compliant glass. For your Pontiac Trans Sport, the goal is straightforward: replacement roof glass should provide clear optics, tolerate heat and weather exposure, and break in a controlled, safety-focused manner. For OEM-quality Pontiac Trans Sport roof-glass replacement, match the factory build and markings—not appearance alone. The correct panel should match the original construction (tempered or laminated), carry the proper AS rating for roof placement, and include a valid DOT code plus the other FMVSS 205/ANSI Z26.1 identifiers. When those details align, you are more likely to match thickness, tint tone, and edge finish so the roof system seals and operates properly. Bang AutoGlass photographs your existing stamp, verifies AS classification and construction, and sources an FMVSS-compliant OEM-quality match before scheduling mobile installation. Many jobs finish in 30–45 minutes; allow about one hour of cure time where bonding applies. We back our work with a lifetime workmanship warranty and coordinate with insurance when comprehensive coverage applies.
How to Read the Sunroof Glass Stamp: DOT Symbol, Manufacturer Code, and Required Marks
The stamp etched into your Pontiac Trans Sport sunroof or panoramic roof glass functions as its compliance label. Knowing what it means helps you verify you are comparing like-for-like parts and strengthens documentation for a claim. Start with the “DOT” marking. Under FMVSS 205, prime glazing manufacturers add DOT plus a manufacturer number assigned by NHTSA, linking the panel to the company that certified it as U.S. motor-vehicle safety glazing. Then confirm the AS classification (AS1, AS2, AS3, etc.) from ANSI/SAE Z26.1. These codes align with tested performance requirements and allowable installation locations. Windshields are often AS1, while Pontiac Trans Sport roof panels are commonly AS2 or AS3 depending on factory tint and design. Many stamps also call out construction—“TEMPERED” or “LAMINATED”—and may include a logo, an “M” model code, production date/batch symbols, and indicators for coatings or privacy tint. You might also see international approvals like an “E” mark with “43R” (UNECE R43). That can be legitimate, but the replacement should still match your original DOT/AS details, tint cues, and construction. Bang AutoGlass photographs the stamp, verifies the markings, and sources an OEM-quality match through mobile service.
AS Ratings and Safety Glazing Types: What the Markings Indicate for Roof Glass
On your Pontiac Trans Sport, the “AS” code etched on the sunroof or panoramic roof glass is the safety-glazing classification from ANSI/SAE Z26.1, which FMVSS 205 incorporates. AS codes indicate the performance category the glass was tested to and where it is intended to be installed. AS1 is typically used for windshields because it aligns with stricter optical and light-transmission requirements, while roof glass is commonly marked AS2 or AS3 based on vehicle design and factory tint. The stamp also identifies construction. Tempered safety glass is heat-treated and usually fractures into many small pieces to reduce sharp shards. Laminated safety glass uses an interlayer that helps retain fragments; depending on the build, it can improve retention, reduce noise, and support UV or solar-control features. Because roof systems vary by trim and model year, OEM-quality Pontiac Trans Sport roof-glass replacement means matching the original construction and markings, not guessing. Why it matters: AS rating, tint category, and glass type affect glare, heat rejection, break behavior, and overall compliance. Bang AutoGlass verifies the AS code and whether the panel is tempered or laminated, then sources an OEM-quality, FMVSS 205-compliant match for your Pontiac Trans Sport sunroof or panoramic roof replacement.
OEM-Quality Match for Pontiac Trans Sport: Tint, Coatings, Hardware, and Sensor Compatibility
Getting an OEM-quality match for Pontiac Trans Sport roof glass is about more than "it fits." Sunroof glass replacement and panoramic roof glass replacement should match factory curvature, thickness, and safety-glazing construction, plus the details that affect comfort and appearance: tint tone, UV filtration, and solar-control coatings that manage infrared heat and glare. When those specs are off, the roof can look two-tone, show mild distortion, or feel noticeably hotter in direct sun. Edge engineering matters too. The ceramic frit band and dot matrix create a consistent bonding surface, protect urethane from UV, and hide the bond line for a clean OEM finish. Many panels also include encapsulation, brackets, locating tabs, and seals that set panel height so the tilt/slide mechanism and sunshade track operate smoothly. Some Pontiac Trans Sport configurations add printed antenna elements or embedded features that must be matched. At Bang AutoGlass, we verify the glass stamp and DOT markings, and we confirm the panel is certified to FMVSS 205 where applicable. Then we source a verified OEM-quality match for your Pontiac Trans Sport and install it via fully mobile service, often as soon as next day, backed by a lifetime workmanship warranty.
Installation Standards That Protect the Result: Bond Prep, Adhesive Choice, and AGRSS Best Practices
The difference between installed and installed correctly is process control. For Pontiac Trans Sport sunroof and panoramic roof glass, installation standards prevent leaks, wind noise, rattles, and premature seal failure. A high-quality panel still depends on correct removal technique, meticulous surface preparation, and the adhesive or mechanical retention method specified for the roof system. We protect the cabin, remove the damaged panel safely, and inspect the aperture, seals, and mounting points so the replacement can sit at the proper OEM height. Surface prep is mandatory. The bond area must be clean, dry, and free of oils, glass dust, and residue that reduce adhesion. Where urethane bonding is used, old urethane is managed to a uniform, stable base as appropriate, and any bare metal or corrosion is treated so the adhesive has a reliable substrate. When required, we apply the correct activator and primer sequence to ensure compatible chemical bonding and UV protection at the bond line. Adhesive handling matters too; automotive urethanes cure predictably only when used per spec. AGRSS provides a benchmark for safe removal, proper prep, adhesive handling, and verification. Bang AutoGlass follows these best practices on every mobile roof-glass job and provides aftercare guidance, including recommended cure time before drive-away, often at least one hour when bonding applies.
Post-Install Verification: Fit, Leak/Wind Noise Checks, and Documentation for Pontiac Trans Sport
Verification is what separates a quick glass swap from a reliable Pontiac Trans Sport sunroof or panoramic roof repair. After installation, we confirm the panel sits at the correct OEM height and perimeter gaps are uniform. Seals should compress evenly, and trim should sit cleanly without lifting, pinching, or misalignment. We recheck mounts, locating tabs, and fasteners so the glass is not under torsional stress and surrounding components are not forced out of position. We then run the roof system through its full operating range, including vent, open, close, and any express functions, plus sunshade movement where equipped. Many roof modules require initialization after service so the motor establishes end stops and anti-pinch parameters; skipping this can cause hesitation, reversing, or a roof that will not fully close. We verify normal operation and listen for abnormal noise that can indicate misalignment or seal interference. To prevent leaks and callbacks, we perform a controlled water test to confirm water routes into the tray and exits through the drains rather than entering the cabin or pooling at corners. We then share aftercare guidance, recommended cure time where bonding applies, and warranty details. Bang AutoGlass supports the work with a lifetime workmanship warranty and can coordinate with insurance when comprehensive coverage applies.
Services
Service Areas
OEM-Quality Sunroof Glass Replacement for Pontiac Trans Sport: DOT Markings and FMVSS 205 Explained
What FMVSS 205 Means for Pontiac Trans Sport Sunroof and Panoramic Roof Glass
FMVSS 205 is the U.S. compliance baseline for automotive safety glazing, including sunroof and panoramic roof glass. The regulation (49 CFR 571.205) incorporates ANSI/SAE Z26.1 for performance categories and the etched certification marks required on compliant glass. For your Pontiac Trans Sport, the goal is straightforward: replacement roof glass should provide clear optics, tolerate heat and weather exposure, and break in a controlled, safety-focused manner. For OEM-quality Pontiac Trans Sport roof-glass replacement, match the factory build and markings—not appearance alone. The correct panel should match the original construction (tempered or laminated), carry the proper AS rating for roof placement, and include a valid DOT code plus the other FMVSS 205/ANSI Z26.1 identifiers. When those details align, you are more likely to match thickness, tint tone, and edge finish so the roof system seals and operates properly. Bang AutoGlass photographs your existing stamp, verifies AS classification and construction, and sources an FMVSS-compliant OEM-quality match before scheduling mobile installation. Many jobs finish in 30–45 minutes; allow about one hour of cure time where bonding applies. We back our work with a lifetime workmanship warranty and coordinate with insurance when comprehensive coverage applies.
How to Read the Sunroof Glass Stamp: DOT Symbol, Manufacturer Code, and Required Marks
The stamp etched into your Pontiac Trans Sport sunroof or panoramic roof glass functions as its compliance label. Knowing what it means helps you verify you are comparing like-for-like parts and strengthens documentation for a claim. Start with the “DOT” marking. Under FMVSS 205, prime glazing manufacturers add DOT plus a manufacturer number assigned by NHTSA, linking the panel to the company that certified it as U.S. motor-vehicle safety glazing. Then confirm the AS classification (AS1, AS2, AS3, etc.) from ANSI/SAE Z26.1. These codes align with tested performance requirements and allowable installation locations. Windshields are often AS1, while Pontiac Trans Sport roof panels are commonly AS2 or AS3 depending on factory tint and design. Many stamps also call out construction—“TEMPERED” or “LAMINATED”—and may include a logo, an “M” model code, production date/batch symbols, and indicators for coatings or privacy tint. You might also see international approvals like an “E” mark with “43R” (UNECE R43). That can be legitimate, but the replacement should still match your original DOT/AS details, tint cues, and construction. Bang AutoGlass photographs the stamp, verifies the markings, and sources an OEM-quality match through mobile service.
AS Ratings and Safety Glazing Types: What the Markings Indicate for Roof Glass
On your Pontiac Trans Sport, the “AS” code etched on the sunroof or panoramic roof glass is the safety-glazing classification from ANSI/SAE Z26.1, which FMVSS 205 incorporates. AS codes indicate the performance category the glass was tested to and where it is intended to be installed. AS1 is typically used for windshields because it aligns with stricter optical and light-transmission requirements, while roof glass is commonly marked AS2 or AS3 based on vehicle design and factory tint. The stamp also identifies construction. Tempered safety glass is heat-treated and usually fractures into many small pieces to reduce sharp shards. Laminated safety glass uses an interlayer that helps retain fragments; depending on the build, it can improve retention, reduce noise, and support UV or solar-control features. Because roof systems vary by trim and model year, OEM-quality Pontiac Trans Sport roof-glass replacement means matching the original construction and markings, not guessing. Why it matters: AS rating, tint category, and glass type affect glare, heat rejection, break behavior, and overall compliance. Bang AutoGlass verifies the AS code and whether the panel is tempered or laminated, then sources an OEM-quality, FMVSS 205-compliant match for your Pontiac Trans Sport sunroof or panoramic roof replacement.
OEM-Quality Match for Pontiac Trans Sport: Tint, Coatings, Hardware, and Sensor Compatibility
Getting an OEM-quality match for Pontiac Trans Sport roof glass is about more than "it fits." Sunroof glass replacement and panoramic roof glass replacement should match factory curvature, thickness, and safety-glazing construction, plus the details that affect comfort and appearance: tint tone, UV filtration, and solar-control coatings that manage infrared heat and glare. When those specs are off, the roof can look two-tone, show mild distortion, or feel noticeably hotter in direct sun. Edge engineering matters too. The ceramic frit band and dot matrix create a consistent bonding surface, protect urethane from UV, and hide the bond line for a clean OEM finish. Many panels also include encapsulation, brackets, locating tabs, and seals that set panel height so the tilt/slide mechanism and sunshade track operate smoothly. Some Pontiac Trans Sport configurations add printed antenna elements or embedded features that must be matched. At Bang AutoGlass, we verify the glass stamp and DOT markings, and we confirm the panel is certified to FMVSS 205 where applicable. Then we source a verified OEM-quality match for your Pontiac Trans Sport and install it via fully mobile service, often as soon as next day, backed by a lifetime workmanship warranty.
Installation Standards That Protect the Result: Bond Prep, Adhesive Choice, and AGRSS Best Practices
The difference between installed and installed correctly is process control. For Pontiac Trans Sport sunroof and panoramic roof glass, installation standards prevent leaks, wind noise, rattles, and premature seal failure. A high-quality panel still depends on correct removal technique, meticulous surface preparation, and the adhesive or mechanical retention method specified for the roof system. We protect the cabin, remove the damaged panel safely, and inspect the aperture, seals, and mounting points so the replacement can sit at the proper OEM height. Surface prep is mandatory. The bond area must be clean, dry, and free of oils, glass dust, and residue that reduce adhesion. Where urethane bonding is used, old urethane is managed to a uniform, stable base as appropriate, and any bare metal or corrosion is treated so the adhesive has a reliable substrate. When required, we apply the correct activator and primer sequence to ensure compatible chemical bonding and UV protection at the bond line. Adhesive handling matters too; automotive urethanes cure predictably only when used per spec. AGRSS provides a benchmark for safe removal, proper prep, adhesive handling, and verification. Bang AutoGlass follows these best practices on every mobile roof-glass job and provides aftercare guidance, including recommended cure time before drive-away, often at least one hour when bonding applies.
Post-Install Verification: Fit, Leak/Wind Noise Checks, and Documentation for Pontiac Trans Sport
Verification is what separates a quick glass swap from a reliable Pontiac Trans Sport sunroof or panoramic roof repair. After installation, we confirm the panel sits at the correct OEM height and perimeter gaps are uniform. Seals should compress evenly, and trim should sit cleanly without lifting, pinching, or misalignment. We recheck mounts, locating tabs, and fasteners so the glass is not under torsional stress and surrounding components are not forced out of position. We then run the roof system through its full operating range, including vent, open, close, and any express functions, plus sunshade movement where equipped. Many roof modules require initialization after service so the motor establishes end stops and anti-pinch parameters; skipping this can cause hesitation, reversing, or a roof that will not fully close. We verify normal operation and listen for abnormal noise that can indicate misalignment or seal interference. To prevent leaks and callbacks, we perform a controlled water test to confirm water routes into the tray and exits through the drains rather than entering the cabin or pooling at corners. We then share aftercare guidance, recommended cure time where bonding applies, and warranty details. Bang AutoGlass supports the work with a lifetime workmanship warranty and can coordinate with insurance when comprehensive coverage applies.
Enjoy More Relevant Blogs
Sunroof vs Moonroof on Pontiac Trans Sport: How to Order the Correct Roof Glass Replacement
Sunroof vs moonroof on Pontiac Trans Sport: learn the differences, how to confirm your roof type, and order the correct replacement glass to avoid fit and leaks.
Will My Comprehensive Policy Cover Pontiac Trans Sport Sunroof Glass Replacement? Claim Steps, Photos to Take, and Deductible Basics
Will comprehensive insurance cover Pontiac Trans Sport sunroof glass replacement? See claim steps, photos to take, deductible basics, and tips before filing.
How to Schedule Mobile Sunroof Glass Replacement for Pontiac Trans Sport
Schedule mobile sunroof glass replacement for Pontiac Trans Sport: what info to share, photos to take, timing, and what to expect on-site—avoid delays today.
Urethane Bonding for Pontiac Trans Sport Sunroof Glass Replacement: Why Adhesive Quality Matters
Urethane bonding for Pontiac Trans Sport sunroof glass replacement: why adhesive quality matters for safety, leaks, and long-term durability after install.
After Breakage: Pontiac Trans Sport Sunroof Glass Replacement Cleanup, Weather Protection, and Next Steps
After breakage on a Pontiac Trans Sport sunroof, follow safe cleanup steps, protect the interior from weather, and know what to expect with replacement next.
Sunroof Leak on Pontiac Trans Sport: Drain Fix vs Sunroof Glass Replacement Decision Guide
Sunroof leak on Pontiac Trans Sport? Compare drain fixes vs sunroof glass replacement, warning signs, and the best next step to stop water damage fast today.
Wind Noise After Sunroof Glass Replacement on Pontiac Trans Sport: Seal, Fit, and Alignment Checklist
Wind noise after Pontiac Trans Sport sunroof glass replacement? Check seal fit, alignment, and hardware so the roof closes tight and stays quiet at speed daily.
Panoramic Sunroof Glass Replacement for Pontiac Trans Sport: Install Steps and Safe Drive-Away Timing
Panoramic sunroof glass replacement for Pontiac Trans Sport: walk through install steps, cure-time rules, and safe drive-away timing so you avoid leaks. Book now.
How Much Does Pontiac Trans Sport Sunroof Glass Replacement Cost? OEM vs Aftermarket, Labor Factors, and Estimate Tips
Pontiac Trans Sport sunroof glass replacement cost: price drivers, OEM vs aftermarket options, labor factors, and tips for an accurate estimate—compare now.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm