Services
Service Areas
How to Schedule ADAS Calibration for Rolls-Royce Phantom After Windshield Replacement
Confirm Rolls-Royce Phantom ADAS Features and OEM Calibration Requirements Before You Book
Scheduling ADAS calibration for a Rolls-Royce Phantom should start with the OEM procedure for your VIN. After windshield replacement, many manufacturers require recalibration because the forward-facing camera behind the glass must be aimed to tight tolerances. That camera may support lane keep assist, lane departure warning, forward collision warning, automatic emergency braking, adaptive cruise control, traffic sign recognition, and intelligent high beams. Since the camera sees through the windshield, small changes in glass fitment, optical clarity, or camera seating can affect system accuracy. Before you book, confirm the method and prerequisites rather than assuming a one-size-fits-all service. Determine whether your Rolls-Royce Phantom needs static calibration with targets and measured setup, dynamic calibration with an OEM-defined drive cycle, or both. Verify whether pre-repair and post-repair scans are required, which modules will be checked for diagnostic trouble codes, and whether the OEM calls out target dimensions, centerline measurements, steering angle resets, or battery-voltage thresholds before calibration will start. Bang AutoGlass reviews the Rolls-Royce Phantom feature set, explains the calibration path in plain language, and schedules the correct workflow with your mobile glass service. You get next-day options, home or office appointments, coordination with any comprehensive insurance carrier, and a lifetime workmanship warranty.
When to Schedule Calibration After Windshield Replacement on Rolls-Royce Phantom: Timing and Dependencies
When planning ADAS calibration for your Rolls-Royce Phantom, focus on anything that changes the vehicle's reference angles. Calibration is most reliable when stance, alignment, and sensor mounting points are final, because the routine validates that the camera and related sensors are aimed correctly after the windshield has been replaced. Start with safe drive-away time. Mobile replacement typically takes 30-45 minutes, and adhesive requires at least one hour of cure time before the vehicle is safe to drive. After that, complete prerequisites that commonly delay or derail calibration: finish wheel alignment and any suspension or ride-height work first, confirm OE tire size with even pressures, verify the camera is seated on a solid bracket, and ensure battery voltage is stable. A diagnostic pre-scan helps identify faults in camera, radar (if equipped), steering, or related ADAS modules that can prevent the routine from starting or completing. Dynamic calibration adds a conditions requirement. OEM service drives may specify speed windows, road types, and clear lane markings, and they can fail in heavy rain, poor lighting, traffic interruptions, or faded striping. Once prerequisites are satisfied, book calibration immediately-often next day-so your Rolls-Royce Phantom spends minimal time with unverified ADAS.
Static vs Dynamic ADAS Calibration for Rolls-Royce Phantom: Choosing the Correct Method
For your Rolls-Royce Phantom, static versus dynamic ADAS calibration is dictated by the OEM, the VIN-specific routine, and what was disturbed during windshield replacement. Static calibration happens in a controlled bay: the vehicle is placed on a verified level surface, targets or reflectors are set at OEM-specified distances and angles, and a scan tool runs the routine and confirms the forward-facing camera (and any related sensors) is within tolerance. This measured setup is common when the OEM wants a repeatable baseline before road learning. Dynamic calibration is completed on the road. The scan tool initiates an OEM service drive, and the system learns by tracking lane markings and roadside features within defined speed ranges and a required distance or time. Some Rolls-Royce Phantom procedures require prerequisites such as alignment confirmation, steering angle resets, or even an initial static routine before the drive cycle will complete. Dynamic routines can be sensitive to rain, glare, traffic interruptions, and faded striping, so route selection and conditions matter. The right approach is to confirm the OEM method for your VIN and follow the workflow exactly. Bang AutoGlass explains what your Rolls-Royce Phantom requires and schedules the correct path after mobile glass service so ADAS features are restored and documented properly.
Pre-Calibration Checklist: Pre-Scan, Vehicle Setup, and Environment Requirements
ADAS calibration is only as accurate as the setup, so a tight pre-calibration checklist for your Rolls-Royce Phantom matters. Start with a diagnostic pre-scan to record diagnostic trouble codes (DTCs) and confirm key modules are communicating: forward-facing camera, radar (if equipped), steering/ABS, and body control. This baseline flags issues that can prevent windshield camera calibration from completing. Next, confirm the windshield replacement is ready for recalibration. Our mobile windshield replacement usually takes 30–45 minutes, then we require at least one hour of adhesive cure time before safe drive-away. That window also helps stabilize the camera bracket. Verify the camera is seated square, the bracket is secure, and the glass is spotless in the camera viewing area. Reinstall the mirror, wipers, trim, and rain/light sensors correctly so nothing blocks the lens. Finally, return the vehicle to OEM baseline: verify OE tire size, equalize tire pressures, remove heavy cargo, and confirm normal ride height. If alignment or suspension work is needed on your Rolls-Royce Phantom, do it first. For static calibration, use level ground, consistent lighting, and OEM target distances. For dynamic, plan a route with clear lane markings. Bang AutoGlass can verify prerequisites and schedule calibration.
What Happens During Calibration on Rolls-Royce Phantom: Targets, Road Procedures, and Verification Steps
During ADAS calibration on your Rolls-Royce Phantom, the technician re-establishes the camera and sensor reference after windshield replacement so driver-assistance features interpret the road correctly. The visit starts by connecting an OEM-level scan tool, confirming the VIN-based procedure, and resolving any diagnostic trouble codes (DTCs) that could block calibration. Preconditions are checked because they affect results: tire pressure, ride height, steering angle center, and stable battery voltage. For static ADAS calibration, the Rolls-Royce Phantom is positioned on verified level ground and targets/reflectors are placed at OEM-specified distances, heights, and angles. The technician measures from the vehicle centerline or thrust line, centers the steering, and controls lighting to reduce glare and false reads. The scan tool then runs the routine and records pass/fail for the forward-facing camera (and any related systems). For dynamic calibration, the scan tool initiates a drive cycle and the vehicle is driven on an OEM-defined route. Completion typically requires clear lane markings, a specific speed window, and steady conditions; if criteria are not met, the routine will not finish. Calibration ends with verification: a post-scan confirms status, confirms DTCs are cleared, and documents results. Bang AutoGlass provides documentation for your records.
Documentation to Request: Pre/Post Scan Reports and Calibration Results for Rolls-Royce Phantom
After windshield replacement and ADAS calibration on a Rolls-Royce Phantom, paperwork matters for safety and traceability. Ask for three items, starting with a pre-repair scan report. This captures diagnostic trouble codes (DTCs) that existed before service and helps separate pre-existing issues from anything found during the repair. The companion post-repair scan confirms which codes cleared and whether any modules still show faults. Second, request the calibration completion report. Depending on the tooling, it may be labeled a calibration certificate, recalibration report, or scan tool printout. It should include the VIN, date, and the specific systems calibrated, most commonly the forward-facing camera on your Rolls-Royce Phantom and sometimes radar or other driver-assist functions. The report should state whether the procedure was static, dynamic, or a combined workflow and should clearly indicate successful completion. Third, ask for repair order notes referencing the OEM procedure and the prerequisites verified. Inputs like tire pressure, ride height, alignment status, camera bracket condition, and battery voltage affect calibration validity. If your provider can supply photos of the target layout or screenshots showing completion status, keep them with your records. Bang AutoGlass provides scan documentation, next-day mobile service, and a lifetime workmanship warranty.
Services
Service Areas
How to Schedule ADAS Calibration for Rolls-Royce Phantom After Windshield Replacement
Confirm Rolls-Royce Phantom ADAS Features and OEM Calibration Requirements Before You Book
Scheduling ADAS calibration for a Rolls-Royce Phantom should start with the OEM procedure for your VIN. After windshield replacement, many manufacturers require recalibration because the forward-facing camera behind the glass must be aimed to tight tolerances. That camera may support lane keep assist, lane departure warning, forward collision warning, automatic emergency braking, adaptive cruise control, traffic sign recognition, and intelligent high beams. Since the camera sees through the windshield, small changes in glass fitment, optical clarity, or camera seating can affect system accuracy. Before you book, confirm the method and prerequisites rather than assuming a one-size-fits-all service. Determine whether your Rolls-Royce Phantom needs static calibration with targets and measured setup, dynamic calibration with an OEM-defined drive cycle, or both. Verify whether pre-repair and post-repair scans are required, which modules will be checked for diagnostic trouble codes, and whether the OEM calls out target dimensions, centerline measurements, steering angle resets, or battery-voltage thresholds before calibration will start. Bang AutoGlass reviews the Rolls-Royce Phantom feature set, explains the calibration path in plain language, and schedules the correct workflow with your mobile glass service. You get next-day options, home or office appointments, coordination with any comprehensive insurance carrier, and a lifetime workmanship warranty.
When to Schedule Calibration After Windshield Replacement on Rolls-Royce Phantom: Timing and Dependencies
When planning ADAS calibration for your Rolls-Royce Phantom, focus on anything that changes the vehicle's reference angles. Calibration is most reliable when stance, alignment, and sensor mounting points are final, because the routine validates that the camera and related sensors are aimed correctly after the windshield has been replaced. Start with safe drive-away time. Mobile replacement typically takes 30-45 minutes, and adhesive requires at least one hour of cure time before the vehicle is safe to drive. After that, complete prerequisites that commonly delay or derail calibration: finish wheel alignment and any suspension or ride-height work first, confirm OE tire size with even pressures, verify the camera is seated on a solid bracket, and ensure battery voltage is stable. A diagnostic pre-scan helps identify faults in camera, radar (if equipped), steering, or related ADAS modules that can prevent the routine from starting or completing. Dynamic calibration adds a conditions requirement. OEM service drives may specify speed windows, road types, and clear lane markings, and they can fail in heavy rain, poor lighting, traffic interruptions, or faded striping. Once prerequisites are satisfied, book calibration immediately-often next day-so your Rolls-Royce Phantom spends minimal time with unverified ADAS.
Static vs Dynamic ADAS Calibration for Rolls-Royce Phantom: Choosing the Correct Method
For your Rolls-Royce Phantom, static versus dynamic ADAS calibration is dictated by the OEM, the VIN-specific routine, and what was disturbed during windshield replacement. Static calibration happens in a controlled bay: the vehicle is placed on a verified level surface, targets or reflectors are set at OEM-specified distances and angles, and a scan tool runs the routine and confirms the forward-facing camera (and any related sensors) is within tolerance. This measured setup is common when the OEM wants a repeatable baseline before road learning. Dynamic calibration is completed on the road. The scan tool initiates an OEM service drive, and the system learns by tracking lane markings and roadside features within defined speed ranges and a required distance or time. Some Rolls-Royce Phantom procedures require prerequisites such as alignment confirmation, steering angle resets, or even an initial static routine before the drive cycle will complete. Dynamic routines can be sensitive to rain, glare, traffic interruptions, and faded striping, so route selection and conditions matter. The right approach is to confirm the OEM method for your VIN and follow the workflow exactly. Bang AutoGlass explains what your Rolls-Royce Phantom requires and schedules the correct path after mobile glass service so ADAS features are restored and documented properly.
Pre-Calibration Checklist: Pre-Scan, Vehicle Setup, and Environment Requirements
ADAS calibration is only as accurate as the setup, so a tight pre-calibration checklist for your Rolls-Royce Phantom matters. Start with a diagnostic pre-scan to record diagnostic trouble codes (DTCs) and confirm key modules are communicating: forward-facing camera, radar (if equipped), steering/ABS, and body control. This baseline flags issues that can prevent windshield camera calibration from completing. Next, confirm the windshield replacement is ready for recalibration. Our mobile windshield replacement usually takes 30–45 minutes, then we require at least one hour of adhesive cure time before safe drive-away. That window also helps stabilize the camera bracket. Verify the camera is seated square, the bracket is secure, and the glass is spotless in the camera viewing area. Reinstall the mirror, wipers, trim, and rain/light sensors correctly so nothing blocks the lens. Finally, return the vehicle to OEM baseline: verify OE tire size, equalize tire pressures, remove heavy cargo, and confirm normal ride height. If alignment or suspension work is needed on your Rolls-Royce Phantom, do it first. For static calibration, use level ground, consistent lighting, and OEM target distances. For dynamic, plan a route with clear lane markings. Bang AutoGlass can verify prerequisites and schedule calibration.
What Happens During Calibration on Rolls-Royce Phantom: Targets, Road Procedures, and Verification Steps
During ADAS calibration on your Rolls-Royce Phantom, the technician re-establishes the camera and sensor reference after windshield replacement so driver-assistance features interpret the road correctly. The visit starts by connecting an OEM-level scan tool, confirming the VIN-based procedure, and resolving any diagnostic trouble codes (DTCs) that could block calibration. Preconditions are checked because they affect results: tire pressure, ride height, steering angle center, and stable battery voltage. For static ADAS calibration, the Rolls-Royce Phantom is positioned on verified level ground and targets/reflectors are placed at OEM-specified distances, heights, and angles. The technician measures from the vehicle centerline or thrust line, centers the steering, and controls lighting to reduce glare and false reads. The scan tool then runs the routine and records pass/fail for the forward-facing camera (and any related systems). For dynamic calibration, the scan tool initiates a drive cycle and the vehicle is driven on an OEM-defined route. Completion typically requires clear lane markings, a specific speed window, and steady conditions; if criteria are not met, the routine will not finish. Calibration ends with verification: a post-scan confirms status, confirms DTCs are cleared, and documents results. Bang AutoGlass provides documentation for your records.
Documentation to Request: Pre/Post Scan Reports and Calibration Results for Rolls-Royce Phantom
After windshield replacement and ADAS calibration on a Rolls-Royce Phantom, paperwork matters for safety and traceability. Ask for three items, starting with a pre-repair scan report. This captures diagnostic trouble codes (DTCs) that existed before service and helps separate pre-existing issues from anything found during the repair. The companion post-repair scan confirms which codes cleared and whether any modules still show faults. Second, request the calibration completion report. Depending on the tooling, it may be labeled a calibration certificate, recalibration report, or scan tool printout. It should include the VIN, date, and the specific systems calibrated, most commonly the forward-facing camera on your Rolls-Royce Phantom and sometimes radar or other driver-assist functions. The report should state whether the procedure was static, dynamic, or a combined workflow and should clearly indicate successful completion. Third, ask for repair order notes referencing the OEM procedure and the prerequisites verified. Inputs like tire pressure, ride height, alignment status, camera bracket condition, and battery voltage affect calibration validity. If your provider can supply photos of the target layout or screenshots showing completion status, keep them with your records. Bang AutoGlass provides scan documentation, next-day mobile service, and a lifetime workmanship warranty.
Services
Service Areas
How to Schedule ADAS Calibration for Rolls-Royce Phantom After Windshield Replacement
Confirm Rolls-Royce Phantom ADAS Features and OEM Calibration Requirements Before You Book
Scheduling ADAS calibration for a Rolls-Royce Phantom should start with the OEM procedure for your VIN. After windshield replacement, many manufacturers require recalibration because the forward-facing camera behind the glass must be aimed to tight tolerances. That camera may support lane keep assist, lane departure warning, forward collision warning, automatic emergency braking, adaptive cruise control, traffic sign recognition, and intelligent high beams. Since the camera sees through the windshield, small changes in glass fitment, optical clarity, or camera seating can affect system accuracy. Before you book, confirm the method and prerequisites rather than assuming a one-size-fits-all service. Determine whether your Rolls-Royce Phantom needs static calibration with targets and measured setup, dynamic calibration with an OEM-defined drive cycle, or both. Verify whether pre-repair and post-repair scans are required, which modules will be checked for diagnostic trouble codes, and whether the OEM calls out target dimensions, centerline measurements, steering angle resets, or battery-voltage thresholds before calibration will start. Bang AutoGlass reviews the Rolls-Royce Phantom feature set, explains the calibration path in plain language, and schedules the correct workflow with your mobile glass service. You get next-day options, home or office appointments, coordination with any comprehensive insurance carrier, and a lifetime workmanship warranty.
When to Schedule Calibration After Windshield Replacement on Rolls-Royce Phantom: Timing and Dependencies
When planning ADAS calibration for your Rolls-Royce Phantom, focus on anything that changes the vehicle's reference angles. Calibration is most reliable when stance, alignment, and sensor mounting points are final, because the routine validates that the camera and related sensors are aimed correctly after the windshield has been replaced. Start with safe drive-away time. Mobile replacement typically takes 30-45 minutes, and adhesive requires at least one hour of cure time before the vehicle is safe to drive. After that, complete prerequisites that commonly delay or derail calibration: finish wheel alignment and any suspension or ride-height work first, confirm OE tire size with even pressures, verify the camera is seated on a solid bracket, and ensure battery voltage is stable. A diagnostic pre-scan helps identify faults in camera, radar (if equipped), steering, or related ADAS modules that can prevent the routine from starting or completing. Dynamic calibration adds a conditions requirement. OEM service drives may specify speed windows, road types, and clear lane markings, and they can fail in heavy rain, poor lighting, traffic interruptions, or faded striping. Once prerequisites are satisfied, book calibration immediately-often next day-so your Rolls-Royce Phantom spends minimal time with unverified ADAS.
Static vs Dynamic ADAS Calibration for Rolls-Royce Phantom: Choosing the Correct Method
For your Rolls-Royce Phantom, static versus dynamic ADAS calibration is dictated by the OEM, the VIN-specific routine, and what was disturbed during windshield replacement. Static calibration happens in a controlled bay: the vehicle is placed on a verified level surface, targets or reflectors are set at OEM-specified distances and angles, and a scan tool runs the routine and confirms the forward-facing camera (and any related sensors) is within tolerance. This measured setup is common when the OEM wants a repeatable baseline before road learning. Dynamic calibration is completed on the road. The scan tool initiates an OEM service drive, and the system learns by tracking lane markings and roadside features within defined speed ranges and a required distance or time. Some Rolls-Royce Phantom procedures require prerequisites such as alignment confirmation, steering angle resets, or even an initial static routine before the drive cycle will complete. Dynamic routines can be sensitive to rain, glare, traffic interruptions, and faded striping, so route selection and conditions matter. The right approach is to confirm the OEM method for your VIN and follow the workflow exactly. Bang AutoGlass explains what your Rolls-Royce Phantom requires and schedules the correct path after mobile glass service so ADAS features are restored and documented properly.
Pre-Calibration Checklist: Pre-Scan, Vehicle Setup, and Environment Requirements
ADAS calibration is only as accurate as the setup, so a tight pre-calibration checklist for your Rolls-Royce Phantom matters. Start with a diagnostic pre-scan to record diagnostic trouble codes (DTCs) and confirm key modules are communicating: forward-facing camera, radar (if equipped), steering/ABS, and body control. This baseline flags issues that can prevent windshield camera calibration from completing. Next, confirm the windshield replacement is ready for recalibration. Our mobile windshield replacement usually takes 30–45 minutes, then we require at least one hour of adhesive cure time before safe drive-away. That window also helps stabilize the camera bracket. Verify the camera is seated square, the bracket is secure, and the glass is spotless in the camera viewing area. Reinstall the mirror, wipers, trim, and rain/light sensors correctly so nothing blocks the lens. Finally, return the vehicle to OEM baseline: verify OE tire size, equalize tire pressures, remove heavy cargo, and confirm normal ride height. If alignment or suspension work is needed on your Rolls-Royce Phantom, do it first. For static calibration, use level ground, consistent lighting, and OEM target distances. For dynamic, plan a route with clear lane markings. Bang AutoGlass can verify prerequisites and schedule calibration.
What Happens During Calibration on Rolls-Royce Phantom: Targets, Road Procedures, and Verification Steps
During ADAS calibration on your Rolls-Royce Phantom, the technician re-establishes the camera and sensor reference after windshield replacement so driver-assistance features interpret the road correctly. The visit starts by connecting an OEM-level scan tool, confirming the VIN-based procedure, and resolving any diagnostic trouble codes (DTCs) that could block calibration. Preconditions are checked because they affect results: tire pressure, ride height, steering angle center, and stable battery voltage. For static ADAS calibration, the Rolls-Royce Phantom is positioned on verified level ground and targets/reflectors are placed at OEM-specified distances, heights, and angles. The technician measures from the vehicle centerline or thrust line, centers the steering, and controls lighting to reduce glare and false reads. The scan tool then runs the routine and records pass/fail for the forward-facing camera (and any related systems). For dynamic calibration, the scan tool initiates a drive cycle and the vehicle is driven on an OEM-defined route. Completion typically requires clear lane markings, a specific speed window, and steady conditions; if criteria are not met, the routine will not finish. Calibration ends with verification: a post-scan confirms status, confirms DTCs are cleared, and documents results. Bang AutoGlass provides documentation for your records.
Documentation to Request: Pre/Post Scan Reports and Calibration Results for Rolls-Royce Phantom
After windshield replacement and ADAS calibration on a Rolls-Royce Phantom, paperwork matters for safety and traceability. Ask for three items, starting with a pre-repair scan report. This captures diagnostic trouble codes (DTCs) that existed before service and helps separate pre-existing issues from anything found during the repair. The companion post-repair scan confirms which codes cleared and whether any modules still show faults. Second, request the calibration completion report. Depending on the tooling, it may be labeled a calibration certificate, recalibration report, or scan tool printout. It should include the VIN, date, and the specific systems calibrated, most commonly the forward-facing camera on your Rolls-Royce Phantom and sometimes radar or other driver-assist functions. The report should state whether the procedure was static, dynamic, or a combined workflow and should clearly indicate successful completion. Third, ask for repair order notes referencing the OEM procedure and the prerequisites verified. Inputs like tire pressure, ride height, alignment status, camera bracket condition, and battery voltage affect calibration validity. If your provider can supply photos of the target layout or screenshots showing completion status, keep them with your records. Bang AutoGlass provides scan documentation, next-day mobile service, and a lifetime workmanship warranty.
Enjoy More Relevant Blogs
Pre- and Post-Calibration Scans for Rolls-Royce Phantom: Proving Systems Are Set Correctly
Pre- and post-calibration scans for Rolls-Royce Phantom: see why scans matter, what they verify, and how reports prove ADAS systems are set correctly after service.
Camera Calibration for Rolls-Royce Phantom: Lane Assist and Forward Collision Accuracy Explained
Need camera calibration for your Rolls-Royce Phantom? See how calibration affects lane assist and forward collision accuracy after windshield service or repairs.
ADAS Warning Lights on Rolls-Royce Phantom: When Calibration Is the Fix and When It’s Not
ADAS warning lights on your Rolls-Royce Phantom? Learn when calibration fixes lane assist or AEB issues, when it will not, and what to check next. Schedule help.
ADAS Calibration Checklist for Rolls-Royce Phantom: Documentation, Verification, and Final Safety Checks
ADAS calibration checklist for Rolls-Royce Phantom: documentation to request, scans to verify, and safety checks that confirm cameras and sensors are set right.
OEM Calibration Requirements for Rolls-Royce Phantom: How to Confirm What Must Be Calibrated
OEM calibration requirements for Rolls-Royce Phantom: how to confirm what must be calibrated after repairs, what triggers recalibration, and what proof to ask for.
Static vs Dynamic ADAS Calibration for Rolls-Royce Phantom: What the Difference Means
Static vs dynamic ADAS calibration for Rolls-Royce Phantom: key differences, when each is required, how long it takes, and what affects accuracy for safety.
How Much Does ADAS Calibration Cost for Rolls-Royce Phantom? What Drives Pricing and What Insurance Typically Covers
How much does ADAS calibration cost for a Rolls-Royce Phantom? Learn pricing drivers, camera vs radar needs, labor time, and what insurance typically covers.
Do You Need ADAS Calibration for Rolls-Royce Phantom After a Wheel Alignment, Suspension Work, or a Minor Collision?
Do you need ADAS calibration for a Rolls-Royce Phantom after alignment, suspension work, or a minor collision? Signs, timelines, safety risks, and costs today.
Mobile ADAS Calibration for Rolls-Royce Phantom: What to Expect On-Site and Why Setup Matters
Mobile ADAS calibration for Rolls-Royce Phantom: what to expect on-site, space and lighting needs, and why setup and verification matter after repairs today.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm