Services
Service Areas
Safety Standards Explained: DOT Markings and FMVSS 205 for Toyota Rav4 Prime Quarter Glass Replacement
FMVSS 205 and ANSI/SAE Z26.1 for Toyota Rav4 Prime Quarter Glass: What the Standard Covers
Replacing Toyota Rav4 Prime quarter glass isn't just a fitment job. FMVSS 205 sets the safety bar. FMVSS 205 (49 CFR 571.205) is the federal glazing standard and it incorporates ANSI/SAE Z26.1, which defines safety-glazing "items," test methods, and the AS classifications stamped on the glass. That is why compliant replacement quarter glass carries a DOT mark plus an appropriate AS rating. The goal is to reduce injuries from impact with glazing, maintain the transparency needed for visibility, and help limit occupant ejection through windows in a crash. For quarter windows, the takeaway is simple: the replacement must be the correct type of safety glass and the correct classification for that vehicle location-not merely the right shape. FMVSS 205 also applies to aftermarket parts; replacement glazing is expected to meet the applicable requirements for the glazing being replaced. Bang AutoGlass uses a practical checklist for Toyota Rav4 Prime quarter glass replacement: verify DOT/AS markings, match tint and sightlines, and install cleanly to restore factory fit. Most mobile quarter glass installs take about 30-45 minutes once work begins, and we recommend at least 1 hour of safe drive-away time for adhesive curing, supported by our lifetime workmanship warranty.
Reading the Quarter Glass Stamp: DOT Symbol, Manufacturer Code, and Required Markings
A quick validation step for a Toyota Rav4 Prime quarter glass replacement is checking the stamp, the etched or laser-applied markings on the glass. Because FMVSS 205 incorporates ANSI/SAE Z26.1, prime glazing manufacturers self-certify compliance by adding specific identifiers. Look for "DOT" followed by a manufacturer code mark assigned by NHTSA, plus the manufacturer's name/trademark and other required information. The DOT code is a traceability link to the registered prime glazing manufacturer, not an official approval seal. Then verify the AS designation-often AS2 or AS3 on quarter windows-which indicates the safety-glazing class and the locations where that glass is intended to be used. Many stamps also show an "M" number or model code to differentiate constructions such as privacy tint, thickness, or solar coatings, and may state "Tempered" or "Laminated." These details matter: if the AS class or construction is wrong for that window position, the part can be effectively noncompliant even if it fits the opening. During mobile Toyota Rav4 Prime quarter glass replacement, Bang AutoGlass checks the new stamp and, when possible, compares it to the original so the replacement matches the intended tint/build and carries the expected DOT/AS markings for OEM or aftermarket glass.
AS Ratings and Safety Glazing Types: What Quarter Glass Is Typically Made From
AS ratings on Toyota Rav4 Prime quarter glass indicate the safety-glazing class, and the DOT mark identifies the manufacturer that self-certifies the glass under FMVSS 205. Because FMVSS 205 incorporates ANSI/SAE Z26.1, each AS class maps to a defined glazing item and tests for impact behavior, strength, and optical quality. Light transmittance is one key factor: glazing considered "requisite for driving visibility" is commonly discussed as needing at least 70% transmission. NHTSA has historically treated passenger cars broadly here, including rear quarter windows, while some trucks and MPVs may have different allowances for rearward side glazing based on vehicle classification. Most quarter windows are tempered safety glass, selected because it fractures into small pieces to reduce injury risk. Laminated side glass can also be used, but only when correctly classified and marked for that location. Tint is where AS labels become practical: AS2 generally aligns with higher light transmission, while AS3 typically indicates darker, privacy-style glazing used in permitted rearward positions. The correct Toyota Rav4 Prime quarter glass replacement matches the factory stamp and tint so the window looks right and remains FMVSS 205-aligned. Bang AutoGlass verifies DOT/AS markings before installation.
Aftermarket Replacement Requirements: What Must Comply for Toyota Rav4 Prime Quarter Glass
Aftermarket Toyota Rav4 Prime quarter glass can be a solid option, but the safety rules don’t change. FMVSS 205 (49 CFR 571.205) requires replacement glazing to meet the same requirements that applied to the original glazing, and those requirements tie to ANSI/SAE Z26.1. Z26.1 defines safety-glazing tests, markings, and AS classifications that limit where each glass type may be used. The goal is straightforward: install quarter glass with the correct AS class for that location and the markings that support certification. Focus on three basics: construction/performance, correct AS rating, and proper marking. The glass should carry Z26.1 markings, including the AS designation and the manufacturer’s distinctive trademark/designation. Many pieces also show the DOT symbol and an NHTSA manufacturer code mark for traceability. If the glass was cut or distributed by an intermediate party, the finished part still needs compliant marking or labeling so certification responsibility is clear. Common problems are the wrong AS designation, the wrong tint variant, or incomplete markings. Bang AutoGlass checks these details during mobile Toyota Rav4 Prime quarter glass replacement. We can often schedule next day, most installs take 30–45 minutes, and we recommend at least 1 hour of safe drive-away time. With comprehensive coverage, we work with all insurance companies and include a lifetime workmanship warranty.
Verifying the Correct Replacement: Markings, Tint Match, and Visual Distortion Checks
For Toyota Rav4 Prime quarter glass replacement, verify the part like a technician. Start with the stamp: confirm the DOT symbol and manufacturer code, match the AS rating to the original glass, and compare any model/designation (“M”) numbers that signal the correct construction and tint variant. Visibility requirements matter. FMVSS 205/ANSI Z26.1 apply a 70% light-transmittance rule to glazing “requisite for driving visibility,” and NHTSA has treated passenger-car rear quarter windows as requisite, so matching the original stamp and tint level matters. Next, check finish details that affect both bonding and appearance: privacy tint shade, any solar/UV coatings, and the ceramic frit/black border that hides urethane and helps protect the bond line. A mismatch can look obvious from outside and can also change what you see during shoulder checks at night. Before final acceptance, do a quick optical check. Look through the glass from multiple angles and scan straight references (parking lot stripes, building edges) for waviness, ripples, or double images. Quarter glass isn’t a windshield, but clarity still supports safe lane changes and blind-spot awareness. Bang AutoGlass includes these checks in our mobile install so your Toyota Rav4 Prime quarter window glass replacement fits, matches, and looks clear.
Documentation and Quality Controls: What to Keep After Toyota Rav4 Prime Quarter Glass Replacement
After your Toyota Rav4 Prime quarter glass replacement, keep documentation to protect your warranty and any future insurance or compliance questions. Save an itemized invoice with the vehicle details, the glass replaced, and the service date, plus the warranty terms. For traceability, take a clear photo of the installed stamp showing the DOT marking, AS designation, and any model/designation number. If insurance is involved, keep the claim number and any authorization or adjuster notes; we work with all insurance companies as long as your policy includes comprehensive coverage. Quality controls matter as much as paperwork. A professional process includes confirming the correct markings and tint, preparing bonding surfaces properly, using the correct urethane system, and completing a final inspection for fit, leaks, wind noise, and clean trim lines. We also communicate safe drive-away time: most quarter glass jobs take about 30–45 minutes once work begins, and we recommend at least 1 hour before driving so the adhesive can cure. Keep Bang AutoGlass contact information with your records. Every installation is backed by a lifetime workmanship warranty, and organized documentation makes any follow-up service, resale questions, or claim support fast and simple.
Services
Service Areas
Safety Standards Explained: DOT Markings and FMVSS 205 for Toyota Rav4 Prime Quarter Glass Replacement
FMVSS 205 and ANSI/SAE Z26.1 for Toyota Rav4 Prime Quarter Glass: What the Standard Covers
Replacing Toyota Rav4 Prime quarter glass isn't just a fitment job. FMVSS 205 sets the safety bar. FMVSS 205 (49 CFR 571.205) is the federal glazing standard and it incorporates ANSI/SAE Z26.1, which defines safety-glazing "items," test methods, and the AS classifications stamped on the glass. That is why compliant replacement quarter glass carries a DOT mark plus an appropriate AS rating. The goal is to reduce injuries from impact with glazing, maintain the transparency needed for visibility, and help limit occupant ejection through windows in a crash. For quarter windows, the takeaway is simple: the replacement must be the correct type of safety glass and the correct classification for that vehicle location-not merely the right shape. FMVSS 205 also applies to aftermarket parts; replacement glazing is expected to meet the applicable requirements for the glazing being replaced. Bang AutoGlass uses a practical checklist for Toyota Rav4 Prime quarter glass replacement: verify DOT/AS markings, match tint and sightlines, and install cleanly to restore factory fit. Most mobile quarter glass installs take about 30-45 minutes once work begins, and we recommend at least 1 hour of safe drive-away time for adhesive curing, supported by our lifetime workmanship warranty.
Reading the Quarter Glass Stamp: DOT Symbol, Manufacturer Code, and Required Markings
A quick validation step for a Toyota Rav4 Prime quarter glass replacement is checking the stamp, the etched or laser-applied markings on the glass. Because FMVSS 205 incorporates ANSI/SAE Z26.1, prime glazing manufacturers self-certify compliance by adding specific identifiers. Look for "DOT" followed by a manufacturer code mark assigned by NHTSA, plus the manufacturer's name/trademark and other required information. The DOT code is a traceability link to the registered prime glazing manufacturer, not an official approval seal. Then verify the AS designation-often AS2 or AS3 on quarter windows-which indicates the safety-glazing class and the locations where that glass is intended to be used. Many stamps also show an "M" number or model code to differentiate constructions such as privacy tint, thickness, or solar coatings, and may state "Tempered" or "Laminated." These details matter: if the AS class or construction is wrong for that window position, the part can be effectively noncompliant even if it fits the opening. During mobile Toyota Rav4 Prime quarter glass replacement, Bang AutoGlass checks the new stamp and, when possible, compares it to the original so the replacement matches the intended tint/build and carries the expected DOT/AS markings for OEM or aftermarket glass.
AS Ratings and Safety Glazing Types: What Quarter Glass Is Typically Made From
AS ratings on Toyota Rav4 Prime quarter glass indicate the safety-glazing class, and the DOT mark identifies the manufacturer that self-certifies the glass under FMVSS 205. Because FMVSS 205 incorporates ANSI/SAE Z26.1, each AS class maps to a defined glazing item and tests for impact behavior, strength, and optical quality. Light transmittance is one key factor: glazing considered "requisite for driving visibility" is commonly discussed as needing at least 70% transmission. NHTSA has historically treated passenger cars broadly here, including rear quarter windows, while some trucks and MPVs may have different allowances for rearward side glazing based on vehicle classification. Most quarter windows are tempered safety glass, selected because it fractures into small pieces to reduce injury risk. Laminated side glass can also be used, but only when correctly classified and marked for that location. Tint is where AS labels become practical: AS2 generally aligns with higher light transmission, while AS3 typically indicates darker, privacy-style glazing used in permitted rearward positions. The correct Toyota Rav4 Prime quarter glass replacement matches the factory stamp and tint so the window looks right and remains FMVSS 205-aligned. Bang AutoGlass verifies DOT/AS markings before installation.
Aftermarket Replacement Requirements: What Must Comply for Toyota Rav4 Prime Quarter Glass
Aftermarket Toyota Rav4 Prime quarter glass can be a solid option, but the safety rules don’t change. FMVSS 205 (49 CFR 571.205) requires replacement glazing to meet the same requirements that applied to the original glazing, and those requirements tie to ANSI/SAE Z26.1. Z26.1 defines safety-glazing tests, markings, and AS classifications that limit where each glass type may be used. The goal is straightforward: install quarter glass with the correct AS class for that location and the markings that support certification. Focus on three basics: construction/performance, correct AS rating, and proper marking. The glass should carry Z26.1 markings, including the AS designation and the manufacturer’s distinctive trademark/designation. Many pieces also show the DOT symbol and an NHTSA manufacturer code mark for traceability. If the glass was cut or distributed by an intermediate party, the finished part still needs compliant marking or labeling so certification responsibility is clear. Common problems are the wrong AS designation, the wrong tint variant, or incomplete markings. Bang AutoGlass checks these details during mobile Toyota Rav4 Prime quarter glass replacement. We can often schedule next day, most installs take 30–45 minutes, and we recommend at least 1 hour of safe drive-away time. With comprehensive coverage, we work with all insurance companies and include a lifetime workmanship warranty.
Verifying the Correct Replacement: Markings, Tint Match, and Visual Distortion Checks
For Toyota Rav4 Prime quarter glass replacement, verify the part like a technician. Start with the stamp: confirm the DOT symbol and manufacturer code, match the AS rating to the original glass, and compare any model/designation (“M”) numbers that signal the correct construction and tint variant. Visibility requirements matter. FMVSS 205/ANSI Z26.1 apply a 70% light-transmittance rule to glazing “requisite for driving visibility,” and NHTSA has treated passenger-car rear quarter windows as requisite, so matching the original stamp and tint level matters. Next, check finish details that affect both bonding and appearance: privacy tint shade, any solar/UV coatings, and the ceramic frit/black border that hides urethane and helps protect the bond line. A mismatch can look obvious from outside and can also change what you see during shoulder checks at night. Before final acceptance, do a quick optical check. Look through the glass from multiple angles and scan straight references (parking lot stripes, building edges) for waviness, ripples, or double images. Quarter glass isn’t a windshield, but clarity still supports safe lane changes and blind-spot awareness. Bang AutoGlass includes these checks in our mobile install so your Toyota Rav4 Prime quarter window glass replacement fits, matches, and looks clear.
Documentation and Quality Controls: What to Keep After Toyota Rav4 Prime Quarter Glass Replacement
After your Toyota Rav4 Prime quarter glass replacement, keep documentation to protect your warranty and any future insurance or compliance questions. Save an itemized invoice with the vehicle details, the glass replaced, and the service date, plus the warranty terms. For traceability, take a clear photo of the installed stamp showing the DOT marking, AS designation, and any model/designation number. If insurance is involved, keep the claim number and any authorization or adjuster notes; we work with all insurance companies as long as your policy includes comprehensive coverage. Quality controls matter as much as paperwork. A professional process includes confirming the correct markings and tint, preparing bonding surfaces properly, using the correct urethane system, and completing a final inspection for fit, leaks, wind noise, and clean trim lines. We also communicate safe drive-away time: most quarter glass jobs take about 30–45 minutes once work begins, and we recommend at least 1 hour before driving so the adhesive can cure. Keep Bang AutoGlass contact information with your records. Every installation is backed by a lifetime workmanship warranty, and organized documentation makes any follow-up service, resale questions, or claim support fast and simple.
Services
Service Areas
Safety Standards Explained: DOT Markings and FMVSS 205 for Toyota Rav4 Prime Quarter Glass Replacement
FMVSS 205 and ANSI/SAE Z26.1 for Toyota Rav4 Prime Quarter Glass: What the Standard Covers
Replacing Toyota Rav4 Prime quarter glass isn't just a fitment job. FMVSS 205 sets the safety bar. FMVSS 205 (49 CFR 571.205) is the federal glazing standard and it incorporates ANSI/SAE Z26.1, which defines safety-glazing "items," test methods, and the AS classifications stamped on the glass. That is why compliant replacement quarter glass carries a DOT mark plus an appropriate AS rating. The goal is to reduce injuries from impact with glazing, maintain the transparency needed for visibility, and help limit occupant ejection through windows in a crash. For quarter windows, the takeaway is simple: the replacement must be the correct type of safety glass and the correct classification for that vehicle location-not merely the right shape. FMVSS 205 also applies to aftermarket parts; replacement glazing is expected to meet the applicable requirements for the glazing being replaced. Bang AutoGlass uses a practical checklist for Toyota Rav4 Prime quarter glass replacement: verify DOT/AS markings, match tint and sightlines, and install cleanly to restore factory fit. Most mobile quarter glass installs take about 30-45 minutes once work begins, and we recommend at least 1 hour of safe drive-away time for adhesive curing, supported by our lifetime workmanship warranty.
Reading the Quarter Glass Stamp: DOT Symbol, Manufacturer Code, and Required Markings
A quick validation step for a Toyota Rav4 Prime quarter glass replacement is checking the stamp, the etched or laser-applied markings on the glass. Because FMVSS 205 incorporates ANSI/SAE Z26.1, prime glazing manufacturers self-certify compliance by adding specific identifiers. Look for "DOT" followed by a manufacturer code mark assigned by NHTSA, plus the manufacturer's name/trademark and other required information. The DOT code is a traceability link to the registered prime glazing manufacturer, not an official approval seal. Then verify the AS designation-often AS2 or AS3 on quarter windows-which indicates the safety-glazing class and the locations where that glass is intended to be used. Many stamps also show an "M" number or model code to differentiate constructions such as privacy tint, thickness, or solar coatings, and may state "Tempered" or "Laminated." These details matter: if the AS class or construction is wrong for that window position, the part can be effectively noncompliant even if it fits the opening. During mobile Toyota Rav4 Prime quarter glass replacement, Bang AutoGlass checks the new stamp and, when possible, compares it to the original so the replacement matches the intended tint/build and carries the expected DOT/AS markings for OEM or aftermarket glass.
AS Ratings and Safety Glazing Types: What Quarter Glass Is Typically Made From
AS ratings on Toyota Rav4 Prime quarter glass indicate the safety-glazing class, and the DOT mark identifies the manufacturer that self-certifies the glass under FMVSS 205. Because FMVSS 205 incorporates ANSI/SAE Z26.1, each AS class maps to a defined glazing item and tests for impact behavior, strength, and optical quality. Light transmittance is one key factor: glazing considered "requisite for driving visibility" is commonly discussed as needing at least 70% transmission. NHTSA has historically treated passenger cars broadly here, including rear quarter windows, while some trucks and MPVs may have different allowances for rearward side glazing based on vehicle classification. Most quarter windows are tempered safety glass, selected because it fractures into small pieces to reduce injury risk. Laminated side glass can also be used, but only when correctly classified and marked for that location. Tint is where AS labels become practical: AS2 generally aligns with higher light transmission, while AS3 typically indicates darker, privacy-style glazing used in permitted rearward positions. The correct Toyota Rav4 Prime quarter glass replacement matches the factory stamp and tint so the window looks right and remains FMVSS 205-aligned. Bang AutoGlass verifies DOT/AS markings before installation.
Aftermarket Replacement Requirements: What Must Comply for Toyota Rav4 Prime Quarter Glass
Aftermarket Toyota Rav4 Prime quarter glass can be a solid option, but the safety rules don’t change. FMVSS 205 (49 CFR 571.205) requires replacement glazing to meet the same requirements that applied to the original glazing, and those requirements tie to ANSI/SAE Z26.1. Z26.1 defines safety-glazing tests, markings, and AS classifications that limit where each glass type may be used. The goal is straightforward: install quarter glass with the correct AS class for that location and the markings that support certification. Focus on three basics: construction/performance, correct AS rating, and proper marking. The glass should carry Z26.1 markings, including the AS designation and the manufacturer’s distinctive trademark/designation. Many pieces also show the DOT symbol and an NHTSA manufacturer code mark for traceability. If the glass was cut or distributed by an intermediate party, the finished part still needs compliant marking or labeling so certification responsibility is clear. Common problems are the wrong AS designation, the wrong tint variant, or incomplete markings. Bang AutoGlass checks these details during mobile Toyota Rav4 Prime quarter glass replacement. We can often schedule next day, most installs take 30–45 minutes, and we recommend at least 1 hour of safe drive-away time. With comprehensive coverage, we work with all insurance companies and include a lifetime workmanship warranty.
Verifying the Correct Replacement: Markings, Tint Match, and Visual Distortion Checks
For Toyota Rav4 Prime quarter glass replacement, verify the part like a technician. Start with the stamp: confirm the DOT symbol and manufacturer code, match the AS rating to the original glass, and compare any model/designation (“M”) numbers that signal the correct construction and tint variant. Visibility requirements matter. FMVSS 205/ANSI Z26.1 apply a 70% light-transmittance rule to glazing “requisite for driving visibility,” and NHTSA has treated passenger-car rear quarter windows as requisite, so matching the original stamp and tint level matters. Next, check finish details that affect both bonding and appearance: privacy tint shade, any solar/UV coatings, and the ceramic frit/black border that hides urethane and helps protect the bond line. A mismatch can look obvious from outside and can also change what you see during shoulder checks at night. Before final acceptance, do a quick optical check. Look through the glass from multiple angles and scan straight references (parking lot stripes, building edges) for waviness, ripples, or double images. Quarter glass isn’t a windshield, but clarity still supports safe lane changes and blind-spot awareness. Bang AutoGlass includes these checks in our mobile install so your Toyota Rav4 Prime quarter window glass replacement fits, matches, and looks clear.
Documentation and Quality Controls: What to Keep After Toyota Rav4 Prime Quarter Glass Replacement
After your Toyota Rav4 Prime quarter glass replacement, keep documentation to protect your warranty and any future insurance or compliance questions. Save an itemized invoice with the vehicle details, the glass replaced, and the service date, plus the warranty terms. For traceability, take a clear photo of the installed stamp showing the DOT marking, AS designation, and any model/designation number. If insurance is involved, keep the claim number and any authorization or adjuster notes; we work with all insurance companies as long as your policy includes comprehensive coverage. Quality controls matter as much as paperwork. A professional process includes confirming the correct markings and tint, preparing bonding surfaces properly, using the correct urethane system, and completing a final inspection for fit, leaks, wind noise, and clean trim lines. We also communicate safe drive-away time: most quarter glass jobs take about 30–45 minutes once work begins, and we recommend at least 1 hour before driving so the adhesive can cure. Keep Bang AutoGlass contact information with your records. Every installation is backed by a lifetime workmanship warranty, and organized documentation makes any follow-up service, resale questions, or claim support fast and simple.
Enjoy More Relevant Blogs
How to Schedule Mobile Quarter Glass Replacement for Toyota Rav4 Prime
Need mobile quarter glass replacement for Toyota Rav4 Prime? Follow our scheduling checklist, photos to take, timing, and on-site tips to restore security.
Quarter Window Replacement for Toyota Rav4 Prime: Step-by-Step From Cleanup to Drive-Away Time
Quarter window replacement for Toyota Rav4 Prime: step-by-step from cleanup to install, urethane cure time, and safe drive-away and wash timing guide today.
Fixed Quarter Window vs Vent Glass on Toyota Rav4 Prime: Ordering the Correct Replacement
Fixed quarter window vs vent glass on Toyota Rav4 Prime: how to identify yours and order the correct replacement for fit, sealing, and safety—read this now.
After a Break-In: Toyota Rav4 Prime Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Toyota Rav4 Prime, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Stop Leaks and Wind Noise: What Proper Toyota Rav4 Prime Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Toyota Rav4 Prime quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
OEM-Quality Quarter Glass Replacement for Toyota Rav4 Prime: Fit, Trim, and Weather-Seal Checklist
OEM-quality quarter glass replacement for Toyota Rav4 Prime: fit, trim, and weather-seal checklist for correct install, leak prevention, and clean finish.
How Much Does Toyota Rav4 Prime Quarter Panel Glass Replacement Cost? Insurance Deductibles, Estimates, and Ways to Save
Cost to replace Toyota Rav4 Prime quarter panel glass: key price factors, OEM vs aftermarket options, insurance deductibles, estimates, and smart ways to save.
Tint & Privacy Glass Match Guide: Toyota Rav4 Prime Quarter Glass Replacement Done Right
Tint and privacy match guide for Toyota Rav4 Prime quarter glass replacement—how to match shade, markings, and fit so the new glass looks factory-perfect.
How Long After Toyota Rav4 Prime Quarter Panel Glass Replacement Can You Drive or Wash the Car? Urethane Cure-Time Rules
After Toyota Rav4 Prime quarter panel glass replacement, learn safe drive-away time, when to wash, and urethane cure rules that help prevent leaks and wind noise.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm