Services
Service Areas
ADAS Calibration Checklist for Aston Martin Db9 Gt: Documentation, Verification, and Final Safety Checks
Identify Aston Martin Db9 Gt ADAS Systems and OEM Calibration Triggers
Before any ADAS procedure on a Aston Martin Db9 Gt, document two items: the systems present and the OEM conditions that mandate calibration. Confirm trim and ADAS package content using VIN/build data, then perform a comprehensive diagnostic scan that lists installed ADAS-related modules and configuration details. In practical terms, validate what controls lane functions (often a forward windshield camera), what controls adaptive cruise and forward collision functions (often front radar), and what supports blind spot or parking features (rear radar, ultrasonics, and additional cameras). Where build data and scan results conflict, defer to OEM service information. Align the calibration plan to the OEM trigger list for the work completed. On a Aston Martin Db9 Gt with a windshield-mounted camera, windshield replacement or camera bracket disturbance commonly requires recalibration because small changes in bracket angle, adhesive thickness, or glass curvature can shift aim. Additional triggers include camera/radar removal and installation, bracket or mounting-surface repair, module replacement or programming, wheel alignment or steering-angle resets, tire-size or ride-height changes, and DTCs indicating lost learned values. Connecting the exact trigger to the correct OEM workflow reduces failures, prevents comebacks, and protects Aston Martin Db9 Gt safety performance.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Pre-calibration documentation makes ADAS work on a Aston Martin Db9 Gt verifiable, insurer-ready, and aligned to OEM guidance. Start with a pre-repair diagnostic scan to capture the DTC baseline across camera and radar modules, ABS/ESC, steering angle, and related body or gateway systems. Then plan for a post-scan to confirm all modules return to normal status after repair. Build a clear narrative that connects the baseline to the calibration trigger. Record the customer concern, VIN, and mileage, then document the work performed: windshield replacement on a Aston Martin Db9 Gt with a camera bracket, camera or radar removal and installation, bumper/grille repairs near the radar, alignment or suspension changes, module replacement, or software updates. Add photos of the windshield, camera bracket, and sensor mounts, plus any damage or aftermarket parts that could affect aim. Package the evidence for review: save the full pre-scan report (current, pending, and history codes when available), freeze-frame data, and scan tool platform/software version, and note whether the OEM calls for static, dynamic, or combined calibration. Bang AutoGlass works with all carriers when comprehensive coverage applies, and complete documentation helps reduce claim delays and supports our lifetime workmanship warranty.
Vehicle Readiness Checklist for Aston Martin Db9 Gt: Tires, Alignment, Ride Height, and Sensor/Glass Prep
A reliable calibration depends on vehicle readiness. For a Aston Martin Db9 Gt, confirm tires are OEM-approved, matched side-to-side, evenly worn, and inflated to spec. Wrong tire size, low pressure, or uneven tread changes rolling radius and steering calculations and can distort lane keeping and adaptive cruise behavior. Verify wheel alignment is within OEM specifications before calibrating; toe, thrust angle, and steering angle sensor values influence how cameras and radar interpret the lane. Next, confirm ride height and loading. Remove heavy cargo, keep the spare tire in place, and maintain normal operating weight; many OEM procedures also specify a minimum fuel level. Aftermarket lifts/levels, non-OEM wheel packages, damaged springs, or unresolved collision damage are common go/no-go issues because they change sensor geometry. Finish with sensor and glass preparation. If the Aston Martin Db9 Gt uses a windshield-mounted camera, inspect the bracket, verify the correct windshield and attachments, and keep the camera view area clean and dry with no stickers, haze, tint artifacts, or residue. Confirm wiper and cowl fitment, ensure radar sensors are seated and unobstructed, and remove anything that blocks sightlines. At Bang AutoGlass, windshield replacement typically takes 30-45 minutes; allow at least one hour of safe drive-away time before dynamic calibration driving.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
OEM-compliant setup prevents ADAS calibration failures on a Aston Martin Db9 Gt. Measure level across the working footprint, including where targets will stand, and keep the area clean so stands do not settle. Set the vehicle reference by establishing centerline and thrust line, centering the steering wheel, and keeping the vehicle straight. Verify OEM-specified space so targets can be positioned at exact distances, offsets, and heights. Stabilize the environment. Avoid sunlight, windshield glare, flicker, deep shadows, rain, dust, and bay traffic that changes lighting. Select the correct OEM targets for the system being calibrated (camera, radar, surround-view) and inspect boards for fading, creases, or contamination. Confirm stands and measurement tools are accurate and locked down. Verify scan tool coverage for the Aston Martin Db9 Gt, select the correct routine for year and trim, and record tool and software versions on the work order. Maintain voltage with a battery maintainer. Follow OEM no-touch requirements during static routines: keep doors closed, avoid leaning on the vehicle, and do not enter the cabin unless directed. These disciplines deliver repeatable results and fewer comebacks at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Aston Martin Db9 Gt
For a Aston Martin Db9 Gt, verification links completion to performance. Start with a post-repair scan as soon as the routine ends. Review camera and radar module status, clear any setup codes, and re-scan to confirm no DTCs remain current or pending. Failed-attempt or communication codes may not illuminate the dash, yet OEM and insurer processes often expect documented post-scan proof. Perform any OEM-directed road validation. If dynamic calibration is required, meet the conditions for roadway type, lane-marking quality, speed band, and minimum duration, and avoid weather or lighting restrictions that invalidate learning. Use a route with consistent lane lines and safe traffic flow. Confirm lane keeping and lane departure behave predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false warn. Validate blind spot and rear cross-traffic alerts where equipped. After windshield work on a Aston Martin Db9 Gt, allow cure time before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and the adhesive needs at least one hour of safe drive-away time before dynamic driving. Finish by confirming the cluster is clear. If warnings persist, recheck alignment, tire spec, ride height, sensor mounting, and glass fitment, then follow the OEM troubleshooting and recalibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Aston Martin Db9 Gt
A complete closeout package is the final quality-control step for ADAS work on a Aston Martin Db9 Gt. Create one record showing what was found, what was performed, and vehicle status at release. Include the calibration result output (VIN, date/time, routine ID, module list, successful completion) and attach pre-scan and post-scan reports to show DTC baseline and restored condition. Include evidence that prerequisites and setup were met: alignment documentation when required, photos of sensor mounting points and the windshield or camera bracket area, and images of target placement and measurement references during static calibration. If the Aston Martin Db9 Gt required dynamic calibration or validation driving, record the OEM procedure name, conditions achieved (speed range, duration), and confirmation that no ADAS warnings remained. Document scan tool platform, software version, fixtures or targets used, and battery maintainer usage for OEM expectations and insurance reimbursement. Provide a copy with the invoice and guidance if a warning returns. Bang AutoGlass works with all carriers when comprehensive coverage applies, and thorough documentation supports our lifetime workmanship warranty. Retain the packet per policy for each Aston Martin Db9 Gt serviced.
Services
Service Areas
ADAS Calibration Checklist for Aston Martin Db9 Gt: Documentation, Verification, and Final Safety Checks
Identify Aston Martin Db9 Gt ADAS Systems and OEM Calibration Triggers
Before any ADAS procedure on a Aston Martin Db9 Gt, document two items: the systems present and the OEM conditions that mandate calibration. Confirm trim and ADAS package content using VIN/build data, then perform a comprehensive diagnostic scan that lists installed ADAS-related modules and configuration details. In practical terms, validate what controls lane functions (often a forward windshield camera), what controls adaptive cruise and forward collision functions (often front radar), and what supports blind spot or parking features (rear radar, ultrasonics, and additional cameras). Where build data and scan results conflict, defer to OEM service information. Align the calibration plan to the OEM trigger list for the work completed. On a Aston Martin Db9 Gt with a windshield-mounted camera, windshield replacement or camera bracket disturbance commonly requires recalibration because small changes in bracket angle, adhesive thickness, or glass curvature can shift aim. Additional triggers include camera/radar removal and installation, bracket or mounting-surface repair, module replacement or programming, wheel alignment or steering-angle resets, tire-size or ride-height changes, and DTCs indicating lost learned values. Connecting the exact trigger to the correct OEM workflow reduces failures, prevents comebacks, and protects Aston Martin Db9 Gt safety performance.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Pre-calibration documentation makes ADAS work on a Aston Martin Db9 Gt verifiable, insurer-ready, and aligned to OEM guidance. Start with a pre-repair diagnostic scan to capture the DTC baseline across camera and radar modules, ABS/ESC, steering angle, and related body or gateway systems. Then plan for a post-scan to confirm all modules return to normal status after repair. Build a clear narrative that connects the baseline to the calibration trigger. Record the customer concern, VIN, and mileage, then document the work performed: windshield replacement on a Aston Martin Db9 Gt with a camera bracket, camera or radar removal and installation, bumper/grille repairs near the radar, alignment or suspension changes, module replacement, or software updates. Add photos of the windshield, camera bracket, and sensor mounts, plus any damage or aftermarket parts that could affect aim. Package the evidence for review: save the full pre-scan report (current, pending, and history codes when available), freeze-frame data, and scan tool platform/software version, and note whether the OEM calls for static, dynamic, or combined calibration. Bang AutoGlass works with all carriers when comprehensive coverage applies, and complete documentation helps reduce claim delays and supports our lifetime workmanship warranty.
Vehicle Readiness Checklist for Aston Martin Db9 Gt: Tires, Alignment, Ride Height, and Sensor/Glass Prep
A reliable calibration depends on vehicle readiness. For a Aston Martin Db9 Gt, confirm tires are OEM-approved, matched side-to-side, evenly worn, and inflated to spec. Wrong tire size, low pressure, or uneven tread changes rolling radius and steering calculations and can distort lane keeping and adaptive cruise behavior. Verify wheel alignment is within OEM specifications before calibrating; toe, thrust angle, and steering angle sensor values influence how cameras and radar interpret the lane. Next, confirm ride height and loading. Remove heavy cargo, keep the spare tire in place, and maintain normal operating weight; many OEM procedures also specify a minimum fuel level. Aftermarket lifts/levels, non-OEM wheel packages, damaged springs, or unresolved collision damage are common go/no-go issues because they change sensor geometry. Finish with sensor and glass preparation. If the Aston Martin Db9 Gt uses a windshield-mounted camera, inspect the bracket, verify the correct windshield and attachments, and keep the camera view area clean and dry with no stickers, haze, tint artifacts, or residue. Confirm wiper and cowl fitment, ensure radar sensors are seated and unobstructed, and remove anything that blocks sightlines. At Bang AutoGlass, windshield replacement typically takes 30-45 minutes; allow at least one hour of safe drive-away time before dynamic calibration driving.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
OEM-compliant setup prevents ADAS calibration failures on a Aston Martin Db9 Gt. Measure level across the working footprint, including where targets will stand, and keep the area clean so stands do not settle. Set the vehicle reference by establishing centerline and thrust line, centering the steering wheel, and keeping the vehicle straight. Verify OEM-specified space so targets can be positioned at exact distances, offsets, and heights. Stabilize the environment. Avoid sunlight, windshield glare, flicker, deep shadows, rain, dust, and bay traffic that changes lighting. Select the correct OEM targets for the system being calibrated (camera, radar, surround-view) and inspect boards for fading, creases, or contamination. Confirm stands and measurement tools are accurate and locked down. Verify scan tool coverage for the Aston Martin Db9 Gt, select the correct routine for year and trim, and record tool and software versions on the work order. Maintain voltage with a battery maintainer. Follow OEM no-touch requirements during static routines: keep doors closed, avoid leaning on the vehicle, and do not enter the cabin unless directed. These disciplines deliver repeatable results and fewer comebacks at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Aston Martin Db9 Gt
For a Aston Martin Db9 Gt, verification links completion to performance. Start with a post-repair scan as soon as the routine ends. Review camera and radar module status, clear any setup codes, and re-scan to confirm no DTCs remain current or pending. Failed-attempt or communication codes may not illuminate the dash, yet OEM and insurer processes often expect documented post-scan proof. Perform any OEM-directed road validation. If dynamic calibration is required, meet the conditions for roadway type, lane-marking quality, speed band, and minimum duration, and avoid weather or lighting restrictions that invalidate learning. Use a route with consistent lane lines and safe traffic flow. Confirm lane keeping and lane departure behave predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false warn. Validate blind spot and rear cross-traffic alerts where equipped. After windshield work on a Aston Martin Db9 Gt, allow cure time before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and the adhesive needs at least one hour of safe drive-away time before dynamic driving. Finish by confirming the cluster is clear. If warnings persist, recheck alignment, tire spec, ride height, sensor mounting, and glass fitment, then follow the OEM troubleshooting and recalibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Aston Martin Db9 Gt
A complete closeout package is the final quality-control step for ADAS work on a Aston Martin Db9 Gt. Create one record showing what was found, what was performed, and vehicle status at release. Include the calibration result output (VIN, date/time, routine ID, module list, successful completion) and attach pre-scan and post-scan reports to show DTC baseline and restored condition. Include evidence that prerequisites and setup were met: alignment documentation when required, photos of sensor mounting points and the windshield or camera bracket area, and images of target placement and measurement references during static calibration. If the Aston Martin Db9 Gt required dynamic calibration or validation driving, record the OEM procedure name, conditions achieved (speed range, duration), and confirmation that no ADAS warnings remained. Document scan tool platform, software version, fixtures or targets used, and battery maintainer usage for OEM expectations and insurance reimbursement. Provide a copy with the invoice and guidance if a warning returns. Bang AutoGlass works with all carriers when comprehensive coverage applies, and thorough documentation supports our lifetime workmanship warranty. Retain the packet per policy for each Aston Martin Db9 Gt serviced.
Services
Service Areas
ADAS Calibration Checklist for Aston Martin Db9 Gt: Documentation, Verification, and Final Safety Checks
Identify Aston Martin Db9 Gt ADAS Systems and OEM Calibration Triggers
Before any ADAS procedure on a Aston Martin Db9 Gt, document two items: the systems present and the OEM conditions that mandate calibration. Confirm trim and ADAS package content using VIN/build data, then perform a comprehensive diagnostic scan that lists installed ADAS-related modules and configuration details. In practical terms, validate what controls lane functions (often a forward windshield camera), what controls adaptive cruise and forward collision functions (often front radar), and what supports blind spot or parking features (rear radar, ultrasonics, and additional cameras). Where build data and scan results conflict, defer to OEM service information. Align the calibration plan to the OEM trigger list for the work completed. On a Aston Martin Db9 Gt with a windshield-mounted camera, windshield replacement or camera bracket disturbance commonly requires recalibration because small changes in bracket angle, adhesive thickness, or glass curvature can shift aim. Additional triggers include camera/radar removal and installation, bracket or mounting-surface repair, module replacement or programming, wheel alignment or steering-angle resets, tire-size or ride-height changes, and DTCs indicating lost learned values. Connecting the exact trigger to the correct OEM workflow reduces failures, prevents comebacks, and protects Aston Martin Db9 Gt safety performance.
Pre-Calibration Documentation: Pre-Scan, DTC Baseline, and Repair Context
Pre-calibration documentation makes ADAS work on a Aston Martin Db9 Gt verifiable, insurer-ready, and aligned to OEM guidance. Start with a pre-repair diagnostic scan to capture the DTC baseline across camera and radar modules, ABS/ESC, steering angle, and related body or gateway systems. Then plan for a post-scan to confirm all modules return to normal status after repair. Build a clear narrative that connects the baseline to the calibration trigger. Record the customer concern, VIN, and mileage, then document the work performed: windshield replacement on a Aston Martin Db9 Gt with a camera bracket, camera or radar removal and installation, bumper/grille repairs near the radar, alignment or suspension changes, module replacement, or software updates. Add photos of the windshield, camera bracket, and sensor mounts, plus any damage or aftermarket parts that could affect aim. Package the evidence for review: save the full pre-scan report (current, pending, and history codes when available), freeze-frame data, and scan tool platform/software version, and note whether the OEM calls for static, dynamic, or combined calibration. Bang AutoGlass works with all carriers when comprehensive coverage applies, and complete documentation helps reduce claim delays and supports our lifetime workmanship warranty.
Vehicle Readiness Checklist for Aston Martin Db9 Gt: Tires, Alignment, Ride Height, and Sensor/Glass Prep
A reliable calibration depends on vehicle readiness. For a Aston Martin Db9 Gt, confirm tires are OEM-approved, matched side-to-side, evenly worn, and inflated to spec. Wrong tire size, low pressure, or uneven tread changes rolling radius and steering calculations and can distort lane keeping and adaptive cruise behavior. Verify wheel alignment is within OEM specifications before calibrating; toe, thrust angle, and steering angle sensor values influence how cameras and radar interpret the lane. Next, confirm ride height and loading. Remove heavy cargo, keep the spare tire in place, and maintain normal operating weight; many OEM procedures also specify a minimum fuel level. Aftermarket lifts/levels, non-OEM wheel packages, damaged springs, or unresolved collision damage are common go/no-go issues because they change sensor geometry. Finish with sensor and glass preparation. If the Aston Martin Db9 Gt uses a windshield-mounted camera, inspect the bracket, verify the correct windshield and attachments, and keep the camera view area clean and dry with no stickers, haze, tint artifacts, or residue. Confirm wiper and cowl fitment, ensure radar sensors are seated and unobstructed, and remove anything that blocks sightlines. At Bang AutoGlass, windshield replacement typically takes 30-45 minutes; allow at least one hour of safe drive-away time before dynamic calibration driving.
Calibration Setup Checklist: Level Surface, Space, Lighting, Targets, and Tool Validation
OEM-compliant setup prevents ADAS calibration failures on a Aston Martin Db9 Gt. Measure level across the working footprint, including where targets will stand, and keep the area clean so stands do not settle. Set the vehicle reference by establishing centerline and thrust line, centering the steering wheel, and keeping the vehicle straight. Verify OEM-specified space so targets can be positioned at exact distances, offsets, and heights. Stabilize the environment. Avoid sunlight, windshield glare, flicker, deep shadows, rain, dust, and bay traffic that changes lighting. Select the correct OEM targets for the system being calibrated (camera, radar, surround-view) and inspect boards for fading, creases, or contamination. Confirm stands and measurement tools are accurate and locked down. Verify scan tool coverage for the Aston Martin Db9 Gt, select the correct routine for year and trim, and record tool and software versions on the work order. Maintain voltage with a battery maintainer. Follow OEM no-touch requirements during static routines: keep doors closed, avoid leaning on the vehicle, and do not enter the cabin unless directed. These disciplines deliver repeatable results and fewer comebacks at Bang AutoGlass.
Verification Steps: Post-Scan, Road Validation, and Clearing ADAS Warnings for Aston Martin Db9 Gt
For a Aston Martin Db9 Gt, verification links completion to performance. Start with a post-repair scan as soon as the routine ends. Review camera and radar module status, clear any setup codes, and re-scan to confirm no DTCs remain current or pending. Failed-attempt or communication codes may not illuminate the dash, yet OEM and insurer processes often expect documented post-scan proof. Perform any OEM-directed road validation. If dynamic calibration is required, meet the conditions for roadway type, lane-marking quality, speed band, and minimum duration, and avoid weather or lighting restrictions that invalidate learning. Use a route with consistent lane lines and safe traffic flow. Confirm lane keeping and lane departure behave predictably, adaptive cruise control maintains distance smoothly, and forward collision features do not false warn. Validate blind spot and rear cross-traffic alerts where equipped. After windshield work on a Aston Martin Db9 Gt, allow cure time before validation. Bang AutoGlass installs typically take 30 to 45 minutes, and the adhesive needs at least one hour of safe drive-away time before dynamic driving. Finish by confirming the cluster is clear. If warnings persist, recheck alignment, tire spec, ride height, sensor mounting, and glass fitment, then follow the OEM troubleshooting and recalibration path.
Final Records and Proof: Calibration Report, Attachments, and Retention for Aston Martin Db9 Gt
A complete closeout package is the final quality-control step for ADAS work on a Aston Martin Db9 Gt. Create one record showing what was found, what was performed, and vehicle status at release. Include the calibration result output (VIN, date/time, routine ID, module list, successful completion) and attach pre-scan and post-scan reports to show DTC baseline and restored condition. Include evidence that prerequisites and setup were met: alignment documentation when required, photos of sensor mounting points and the windshield or camera bracket area, and images of target placement and measurement references during static calibration. If the Aston Martin Db9 Gt required dynamic calibration or validation driving, record the OEM procedure name, conditions achieved (speed range, duration), and confirmation that no ADAS warnings remained. Document scan tool platform, software version, fixtures or targets used, and battery maintainer usage for OEM expectations and insurance reimbursement. Provide a copy with the invoice and guidance if a warning returns. Bang AutoGlass works with all carriers when comprehensive coverage applies, and thorough documentation supports our lifetime workmanship warranty. Retain the packet per policy for each Aston Martin Db9 Gt serviced.
Enjoy More Relevant Blogs
Mobile ADAS Calibration for Aston Martin Db9 Gt: What to Expect On-Site and Why Setup Matters
Mobile ADAS calibration for Aston Martin Db9 Gt: what to expect on-site, space and lighting needs, and why setup and verification matter after repairs today.
Static vs Dynamic ADAS Calibration for Aston Martin Db9 Gt: What the Difference Means
Static vs dynamic ADAS calibration for Aston Martin Db9 Gt: key differences, when each is required, how long it takes, and what affects accuracy for safety.
Do You Need ADAS Calibration for Aston Martin Db9 Gt After a Wheel Alignment, Suspension Work, or a Minor Collision?
Do you need ADAS calibration for a Aston Martin Db9 Gt after alignment, suspension work, or a minor collision? Signs, timelines, safety risks, and costs today.
ADAS Warning Lights on Aston Martin Db9 Gt: When Calibration Is the Fix and When It’s Not
ADAS warning lights on your Aston Martin Db9 Gt? Learn when calibration fixes lane assist or AEB issues, when it will not, and what to check next. Schedule help.
Camera Calibration for Aston Martin Db9 Gt: Lane Assist and Forward Collision Accuracy Explained
Need camera calibration for your Aston Martin Db9 Gt? See how calibration affects lane assist and forward collision accuracy after windshield service or repairs.
OEM Calibration Requirements for Aston Martin Db9 Gt: How to Confirm What Must Be Calibrated
OEM calibration requirements for Aston Martin Db9 Gt: how to confirm what must be calibrated after repairs, what triggers recalibration, and what proof to ask for.
How Much Does ADAS Calibration Cost for Aston Martin Db9 Gt? What Drives Pricing and What Insurance Typically Covers
How much does ADAS calibration cost for a Aston Martin Db9 Gt? Learn pricing drivers, camera vs radar needs, labor time, and what insurance typically covers.
How to Schedule ADAS Calibration for Aston Martin Db9 Gt After Windshield Replacement
Schedule ADAS calibration for Aston Martin Db9 Gt after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
Pre- and Post-Calibration Scans for Aston Martin Db9 Gt: Proving Systems Are Set Correctly
Pre- and post-calibration scans for Aston Martin Db9 Gt: see why scans matter, what they verify, and how reports prove ADAS systems are set correctly after service.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm