Services
Service Areas
Cleanup After Quarter Window Breakage on Audi A5 Sport: Safe Glass Removal and Interior Protection
With a broken quarter window on your Audi A5 Sport, cleanup is where small mistakes turn into scratches, lingering glass, and drafts from a rushed cover. Because quarter glass is tempered, it breaks into pellets that migrate into carpet, seat rails, and storage pockets. Secure the vehicle first: keep children and pets away, wear eye protection and cut-resistant gloves, and remove loose items that can hide shards. Lift the largest pieces from the opening and lower ledge rather than pressing down. Scoop with a dustpan or stiff cardboard, then vacuum in passes with a hose and crevice tool, starting at trim seams and working down through seats, carpet, and floor mats. Skip aggressive sweeping; it drives fine glass deeper into fabric. For upholstery, press wide painter’s tape or use a lint roller to capture the grit you can’t see, and wipe hard plastics with a damp microfiber. If you need a short-term weather shield, tape plastic sheeting from the inside with painter’s tape so it sheds rain without pulling paint or leaving residue. Then schedule Bang AutoGlass for mobile quarter window replacement—we arrive with the correct glass, complete final cleanup, and often restore your Audi A5 Sport as soon as next day.
Verify the Correct Quarter Glass for Audi A5 Sport: Fixed vs Pop-Out, Tint Match, and DOT Markings
Before we install a quarter window on your Audi A5 Sport, we confirm the exact part and configuration so you don’t end up with a trim gap, slow leak, or a tint mismatch. First we identify the window style: fixed, urethane-bonded quarter glass versus a pop-out/vent unit with hinges, latches, and a different frame. We verify your Audi A5 Sport body style, model-year range, and left/right orientation. Next we match appearance—clear versus factory privacy tint, shade consistency, and how any existing film will affect the final tone. We also confirm compliance markings on the glass “bug,” including DOT and safety identifiers and the correct AS rating for non-windshield glazing. Many quarter windows are supplied as an encapsulated assembly with bonded molding, studs, locator pins, or clips; those components control seating depth, reveal lines, and how interior panels snap back in without stress. When applicable, we verify embedded features such as antenna elements so functionality is retained. The goal is an OEM-style Audi A5 Sport quarter window replacement that seals and looks factory. If comprehensive coverage applies, Bang AutoGlass works with all insurance companies and can assist with claim steps on-site.
Remove Trim and Old Glass: Audi A5 Sport Quarter Window Replacement Disassembly Checklist
For a Audi A5 Sport quarter window replacement, the craftsmanship is in the take-apart: reach the glass without scuffing paint, bending the flange, or breaking small clips that later become squeaks. We start by clearing the quarter area, lowering the rear seat if needed, and covering seats and carpet. After masking the exterior edge with protective tape, we work panel-by-panel with non-marring tools, finding hidden screws and push-pins and keeping hardware grouped for accurate reassembly. Because quarter trim often sits near curtain airbags and seatbelt anchors, we follow safe access points and avoid disturbing restraint components. Once exposed, we determine how the glass is retained. On bonded applications, we cut the urethane bead in a controlled way—often with a cold-knife or wire system—so the pane releases without gouging the pinchweld. On bolt-in or framed designs, we support the glass while retainers are removed and watch locator pins that can snap if the pane shifts. After removal, we clear remaining fragments, inspect moldings, and prep the opening for bonding and installation. Most mobile swaps take roughly 30–45 minutes, with cure time afterward based on the adhesive system.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
Prep is the quiet step that prevents loud problems later—wind noise, leaks, and rust after your Audi A5 Sport quarter window replacement. With bonded quarter glass, the critical surfaces are the pinchweld and the glass bond band, and both must be ready for urethane to achieve full strength. We inspect the opening for corrosion, old adhesive quality, and signs of prior bodywork that can affect fit and sealing. If we find bubbling paint or rust, we address it per refinish standards so the flange is stable, while avoiding unnecessary grinding that removes factory coatings. Next, the old urethane is reduced to a consistent, thin base layer so new urethane can chemically and mechanically bond to it. Any exposed bare metal—whether from minor damage or a previous cut—is treated and primed appropriately, and pinchweld primer is applied when the adhesive system calls for it. On the glass itself, we clean the bond area thoroughly and apply activator/primer as required to improve adhesion and provide UV protection at the bond line. Throughout the process, contamination control is strict: no household cleaners, no silicone, and no shortcuts on dry/flash times, since those are common causes of edge lifts and long-term seepage. Before final set, we test-fit the quarter glass to verify alignment, locator engagement, and molding contact, then mask the perimeter to keep the finished edge uniform. Done correctly, your Audi A5 Sport gets an OEM-style seal that resists water intrusion and slows corrosion over time.
Urethane Bonding and Minimum Drive-Away Time for Audi A5 Sport: SDAT Factors You Must Follow
Urethane bonding is the step that decides whether your Audi A5 Sport quarter window replacement stays quiet and watertight or develops leaks and wind noise. Bang AutoGlass uses automotive-grade urethane and applies a continuous, properly sized bead to maintain correct stand-off, seat depth, and support for surrounding moldings. Corners and transitions are treated carefully because thin spots can become leak paths. We set the quarter glass on its locators, align it to body lines, and confirm uniform contact around the perimeter without over-compressing the bead. The glass is then stabilized so it cannot shift while curing begins. Safe Drive-Away Time (SDAT) is mandatory and depends on the specific urethane system plus ambient temperature and relative humidity. Cooler, drier conditions typically slow cure, while warmer, more humid air generally accelerates it, which is why professional adhesive systems publish SDAT procedures and charts. As our baseline standard, we require at least one full hour before your Audi A5 Sport is considered safe to drive, even though the install often takes about 30–45 minutes. During early cure, avoid door slams, aggressive window operation, and rough roads that flex the body opening. For best results, postpone high-pressure washing for 24–48 hours and keep the bond line undisturbed. Need convenience? Our mobile auto glass service comes to you, and we work with all insurance companies when comprehensive coverage applies.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Audi A5 Sport
Before we return your Audi A5 Sport, we complete quality control to confirm the quarter window replacement looks right and seals right. We start with a full visual inspection inside and outside: the quarter glass should be centered, the reveal lines should match the opposite side, and molding or encapsulation must sit flush with no corner lifts, gaps, or uneven edges. We verify urethane contact and ensure trim can seat properly without stress. Next, we confirm interior trim fitment and clip engagement so you do not inherit future buzzes, rattles, or loose panels in the quarter or cargo area. Leak prevention is validated with a controlled water test: a steady hose stream along the perimeter while we observe the interior edge and quarter cavity for moisture. If wind noise is a concern, we check perimeter contact points and trim alignment, since small edge separations can whistle at speed. We then clean the glass, remove protective tape, and ensure surrounding paint and trim are left clean and free of residue. To close out, we document part verification, DOT markings, installation notes, and aftercare, including the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. Your paperwork reflects our lifetime workmanship warranty, and if you are filing a claim we can assist with any insurer when comprehensive coverage applies. The result is a Audi A5 Sport quarter window replacement that is verified, documented, and ready for normal use—often completed at your location by our mobile auto glass team.
Services
Service Areas
Cleanup After Quarter Window Breakage on Audi A5 Sport: Safe Glass Removal and Interior Protection
With a broken quarter window on your Audi A5 Sport, cleanup is where small mistakes turn into scratches, lingering glass, and drafts from a rushed cover. Because quarter glass is tempered, it breaks into pellets that migrate into carpet, seat rails, and storage pockets. Secure the vehicle first: keep children and pets away, wear eye protection and cut-resistant gloves, and remove loose items that can hide shards. Lift the largest pieces from the opening and lower ledge rather than pressing down. Scoop with a dustpan or stiff cardboard, then vacuum in passes with a hose and crevice tool, starting at trim seams and working down through seats, carpet, and floor mats. Skip aggressive sweeping; it drives fine glass deeper into fabric. For upholstery, press wide painter’s tape or use a lint roller to capture the grit you can’t see, and wipe hard plastics with a damp microfiber. If you need a short-term weather shield, tape plastic sheeting from the inside with painter’s tape so it sheds rain without pulling paint or leaving residue. Then schedule Bang AutoGlass for mobile quarter window replacement—we arrive with the correct glass, complete final cleanup, and often restore your Audi A5 Sport as soon as next day.
Verify the Correct Quarter Glass for Audi A5 Sport: Fixed vs Pop-Out, Tint Match, and DOT Markings
Before we install a quarter window on your Audi A5 Sport, we confirm the exact part and configuration so you don’t end up with a trim gap, slow leak, or a tint mismatch. First we identify the window style: fixed, urethane-bonded quarter glass versus a pop-out/vent unit with hinges, latches, and a different frame. We verify your Audi A5 Sport body style, model-year range, and left/right orientation. Next we match appearance—clear versus factory privacy tint, shade consistency, and how any existing film will affect the final tone. We also confirm compliance markings on the glass “bug,” including DOT and safety identifiers and the correct AS rating for non-windshield glazing. Many quarter windows are supplied as an encapsulated assembly with bonded molding, studs, locator pins, or clips; those components control seating depth, reveal lines, and how interior panels snap back in without stress. When applicable, we verify embedded features such as antenna elements so functionality is retained. The goal is an OEM-style Audi A5 Sport quarter window replacement that seals and looks factory. If comprehensive coverage applies, Bang AutoGlass works with all insurance companies and can assist with claim steps on-site.
Remove Trim and Old Glass: Audi A5 Sport Quarter Window Replacement Disassembly Checklist
For a Audi A5 Sport quarter window replacement, the craftsmanship is in the take-apart: reach the glass without scuffing paint, bending the flange, or breaking small clips that later become squeaks. We start by clearing the quarter area, lowering the rear seat if needed, and covering seats and carpet. After masking the exterior edge with protective tape, we work panel-by-panel with non-marring tools, finding hidden screws and push-pins and keeping hardware grouped for accurate reassembly. Because quarter trim often sits near curtain airbags and seatbelt anchors, we follow safe access points and avoid disturbing restraint components. Once exposed, we determine how the glass is retained. On bonded applications, we cut the urethane bead in a controlled way—often with a cold-knife or wire system—so the pane releases without gouging the pinchweld. On bolt-in or framed designs, we support the glass while retainers are removed and watch locator pins that can snap if the pane shifts. After removal, we clear remaining fragments, inspect moldings, and prep the opening for bonding and installation. Most mobile swaps take roughly 30–45 minutes, with cure time afterward based on the adhesive system.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
Prep is the quiet step that prevents loud problems later—wind noise, leaks, and rust after your Audi A5 Sport quarter window replacement. With bonded quarter glass, the critical surfaces are the pinchweld and the glass bond band, and both must be ready for urethane to achieve full strength. We inspect the opening for corrosion, old adhesive quality, and signs of prior bodywork that can affect fit and sealing. If we find bubbling paint or rust, we address it per refinish standards so the flange is stable, while avoiding unnecessary grinding that removes factory coatings. Next, the old urethane is reduced to a consistent, thin base layer so new urethane can chemically and mechanically bond to it. Any exposed bare metal—whether from minor damage or a previous cut—is treated and primed appropriately, and pinchweld primer is applied when the adhesive system calls for it. On the glass itself, we clean the bond area thoroughly and apply activator/primer as required to improve adhesion and provide UV protection at the bond line. Throughout the process, contamination control is strict: no household cleaners, no silicone, and no shortcuts on dry/flash times, since those are common causes of edge lifts and long-term seepage. Before final set, we test-fit the quarter glass to verify alignment, locator engagement, and molding contact, then mask the perimeter to keep the finished edge uniform. Done correctly, your Audi A5 Sport gets an OEM-style seal that resists water intrusion and slows corrosion over time.
Urethane Bonding and Minimum Drive-Away Time for Audi A5 Sport: SDAT Factors You Must Follow
Urethane bonding is the step that decides whether your Audi A5 Sport quarter window replacement stays quiet and watertight or develops leaks and wind noise. Bang AutoGlass uses automotive-grade urethane and applies a continuous, properly sized bead to maintain correct stand-off, seat depth, and support for surrounding moldings. Corners and transitions are treated carefully because thin spots can become leak paths. We set the quarter glass on its locators, align it to body lines, and confirm uniform contact around the perimeter without over-compressing the bead. The glass is then stabilized so it cannot shift while curing begins. Safe Drive-Away Time (SDAT) is mandatory and depends on the specific urethane system plus ambient temperature and relative humidity. Cooler, drier conditions typically slow cure, while warmer, more humid air generally accelerates it, which is why professional adhesive systems publish SDAT procedures and charts. As our baseline standard, we require at least one full hour before your Audi A5 Sport is considered safe to drive, even though the install often takes about 30–45 minutes. During early cure, avoid door slams, aggressive window operation, and rough roads that flex the body opening. For best results, postpone high-pressure washing for 24–48 hours and keep the bond line undisturbed. Need convenience? Our mobile auto glass service comes to you, and we work with all insurance companies when comprehensive coverage applies.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Audi A5 Sport
Before we return your Audi A5 Sport, we complete quality control to confirm the quarter window replacement looks right and seals right. We start with a full visual inspection inside and outside: the quarter glass should be centered, the reveal lines should match the opposite side, and molding or encapsulation must sit flush with no corner lifts, gaps, or uneven edges. We verify urethane contact and ensure trim can seat properly without stress. Next, we confirm interior trim fitment and clip engagement so you do not inherit future buzzes, rattles, or loose panels in the quarter or cargo area. Leak prevention is validated with a controlled water test: a steady hose stream along the perimeter while we observe the interior edge and quarter cavity for moisture. If wind noise is a concern, we check perimeter contact points and trim alignment, since small edge separations can whistle at speed. We then clean the glass, remove protective tape, and ensure surrounding paint and trim are left clean and free of residue. To close out, we document part verification, DOT markings, installation notes, and aftercare, including the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. Your paperwork reflects our lifetime workmanship warranty, and if you are filing a claim we can assist with any insurer when comprehensive coverage applies. The result is a Audi A5 Sport quarter window replacement that is verified, documented, and ready for normal use—often completed at your location by our mobile auto glass team.
Services
Service Areas
Cleanup After Quarter Window Breakage on Audi A5 Sport: Safe Glass Removal and Interior Protection
With a broken quarter window on your Audi A5 Sport, cleanup is where small mistakes turn into scratches, lingering glass, and drafts from a rushed cover. Because quarter glass is tempered, it breaks into pellets that migrate into carpet, seat rails, and storage pockets. Secure the vehicle first: keep children and pets away, wear eye protection and cut-resistant gloves, and remove loose items that can hide shards. Lift the largest pieces from the opening and lower ledge rather than pressing down. Scoop with a dustpan or stiff cardboard, then vacuum in passes with a hose and crevice tool, starting at trim seams and working down through seats, carpet, and floor mats. Skip aggressive sweeping; it drives fine glass deeper into fabric. For upholstery, press wide painter’s tape or use a lint roller to capture the grit you can’t see, and wipe hard plastics with a damp microfiber. If you need a short-term weather shield, tape plastic sheeting from the inside with painter’s tape so it sheds rain without pulling paint or leaving residue. Then schedule Bang AutoGlass for mobile quarter window replacement—we arrive with the correct glass, complete final cleanup, and often restore your Audi A5 Sport as soon as next day.
Verify the Correct Quarter Glass for Audi A5 Sport: Fixed vs Pop-Out, Tint Match, and DOT Markings
Before we install a quarter window on your Audi A5 Sport, we confirm the exact part and configuration so you don’t end up with a trim gap, slow leak, or a tint mismatch. First we identify the window style: fixed, urethane-bonded quarter glass versus a pop-out/vent unit with hinges, latches, and a different frame. We verify your Audi A5 Sport body style, model-year range, and left/right orientation. Next we match appearance—clear versus factory privacy tint, shade consistency, and how any existing film will affect the final tone. We also confirm compliance markings on the glass “bug,” including DOT and safety identifiers and the correct AS rating for non-windshield glazing. Many quarter windows are supplied as an encapsulated assembly with bonded molding, studs, locator pins, or clips; those components control seating depth, reveal lines, and how interior panels snap back in without stress. When applicable, we verify embedded features such as antenna elements so functionality is retained. The goal is an OEM-style Audi A5 Sport quarter window replacement that seals and looks factory. If comprehensive coverage applies, Bang AutoGlass works with all insurance companies and can assist with claim steps on-site.
Remove Trim and Old Glass: Audi A5 Sport Quarter Window Replacement Disassembly Checklist
For a Audi A5 Sport quarter window replacement, the craftsmanship is in the take-apart: reach the glass without scuffing paint, bending the flange, or breaking small clips that later become squeaks. We start by clearing the quarter area, lowering the rear seat if needed, and covering seats and carpet. After masking the exterior edge with protective tape, we work panel-by-panel with non-marring tools, finding hidden screws and push-pins and keeping hardware grouped for accurate reassembly. Because quarter trim often sits near curtain airbags and seatbelt anchors, we follow safe access points and avoid disturbing restraint components. Once exposed, we determine how the glass is retained. On bonded applications, we cut the urethane bead in a controlled way—often with a cold-knife or wire system—so the pane releases without gouging the pinchweld. On bolt-in or framed designs, we support the glass while retainers are removed and watch locator pins that can snap if the pane shifts. After removal, we clear remaining fragments, inspect moldings, and prep the opening for bonding and installation. Most mobile swaps take roughly 30–45 minutes, with cure time afterward based on the adhesive system.
Prep the Pinchweld and Bond Area: Corrosion Checks, Primers, and Adhesion Readiness
Prep is the quiet step that prevents loud problems later—wind noise, leaks, and rust after your Audi A5 Sport quarter window replacement. With bonded quarter glass, the critical surfaces are the pinchweld and the glass bond band, and both must be ready for urethane to achieve full strength. We inspect the opening for corrosion, old adhesive quality, and signs of prior bodywork that can affect fit and sealing. If we find bubbling paint or rust, we address it per refinish standards so the flange is stable, while avoiding unnecessary grinding that removes factory coatings. Next, the old urethane is reduced to a consistent, thin base layer so new urethane can chemically and mechanically bond to it. Any exposed bare metal—whether from minor damage or a previous cut—is treated and primed appropriately, and pinchweld primer is applied when the adhesive system calls for it. On the glass itself, we clean the bond area thoroughly and apply activator/primer as required to improve adhesion and provide UV protection at the bond line. Throughout the process, contamination control is strict: no household cleaners, no silicone, and no shortcuts on dry/flash times, since those are common causes of edge lifts and long-term seepage. Before final set, we test-fit the quarter glass to verify alignment, locator engagement, and molding contact, then mask the perimeter to keep the finished edge uniform. Done correctly, your Audi A5 Sport gets an OEM-style seal that resists water intrusion and slows corrosion over time.
Urethane Bonding and Minimum Drive-Away Time for Audi A5 Sport: SDAT Factors You Must Follow
Urethane bonding is the step that decides whether your Audi A5 Sport quarter window replacement stays quiet and watertight or develops leaks and wind noise. Bang AutoGlass uses automotive-grade urethane and applies a continuous, properly sized bead to maintain correct stand-off, seat depth, and support for surrounding moldings. Corners and transitions are treated carefully because thin spots can become leak paths. We set the quarter glass on its locators, align it to body lines, and confirm uniform contact around the perimeter without over-compressing the bead. The glass is then stabilized so it cannot shift while curing begins. Safe Drive-Away Time (SDAT) is mandatory and depends on the specific urethane system plus ambient temperature and relative humidity. Cooler, drier conditions typically slow cure, while warmer, more humid air generally accelerates it, which is why professional adhesive systems publish SDAT procedures and charts. As our baseline standard, we require at least one full hour before your Audi A5 Sport is considered safe to drive, even though the install often takes about 30–45 minutes. During early cure, avoid door slams, aggressive window operation, and rough roads that flex the body opening. For best results, postpone high-pressure washing for 24–48 hours and keep the bond line undisturbed. Need convenience? Our mobile auto glass service comes to you, and we work with all insurance companies when comprehensive coverage applies.
Final Quality Checks: Leak Test, Wind Noise, Trim Fit, and Documentation for Audi A5 Sport
Before we return your Audi A5 Sport, we complete quality control to confirm the quarter window replacement looks right and seals right. We start with a full visual inspection inside and outside: the quarter glass should be centered, the reveal lines should match the opposite side, and molding or encapsulation must sit flush with no corner lifts, gaps, or uneven edges. We verify urethane contact and ensure trim can seat properly without stress. Next, we confirm interior trim fitment and clip engagement so you do not inherit future buzzes, rattles, or loose panels in the quarter or cargo area. Leak prevention is validated with a controlled water test: a steady hose stream along the perimeter while we observe the interior edge and quarter cavity for moisture. If wind noise is a concern, we check perimeter contact points and trim alignment, since small edge separations can whistle at speed. We then clean the glass, remove protective tape, and ensure surrounding paint and trim are left clean and free of residue. To close out, we document part verification, DOT markings, installation notes, and aftercare, including the minimum one-hour safe drive-away time and avoiding high-pressure washes for 24–48 hours. Your paperwork reflects our lifetime workmanship warranty, and if you are filing a claim we can assist with any insurer when comprehensive coverage applies. The result is a Audi A5 Sport quarter window replacement that is verified, documented, and ready for normal use—often completed at your location by our mobile auto glass team.
Enjoy More Relevant Blogs
Tint & Privacy Glass Match Guide: Audi A5 Sport Quarter Glass Replacement Done Right
Tint and privacy match guide for Audi A5 Sport quarter glass replacement—how to match shade, markings, and fit so the new glass looks factory-perfect.
After a Break-In: Audi A5 Sport Quarter Glass Replacement Plan to Restore Security and Visibility
After a break-in on Audi A5 Sport, restore security with a quarter glass replacement plan: cleanup, temporary protection, scheduling, and post-install checks.
Stop Leaks and Wind Noise: What Proper Audi A5 Sport Quarter Glass Replacement Should Prevent
Stop leaks and wind noise with proper Audi A5 Sport quarter glass replacement. Learn what correct fit, sealing, and trim should prevent after install.
How to Schedule Mobile Quarter Glass Replacement for Audi A5 Sport
Need mobile quarter glass replacement for Audi A5 Sport? Follow our scheduling checklist, photos to take, timing, and on-site tips to restore security.
How Long After Audi A5 Sport Quarter Panel Glass Replacement Can You Drive or Wash the Car? Urethane Cure-Time Rules
After Audi A5 Sport quarter panel glass replacement, learn safe drive-away time, when to wash, and urethane cure rules that help prevent leaks and wind noise.
Safety Standards Explained: DOT Markings and FMVSS 205 for Audi A5 Sport Quarter Glass Replacement
DOT markings and FMVSS 205 explained for Audi A5 Sport quarter glass replacement—how to verify safety markings and choose compliant OEM-quality glass.
How Much Does Audi A5 Sport Quarter Panel Glass Replacement Cost? Insurance Deductibles, Estimates, and Ways to Save
Cost to replace Audi A5 Sport quarter panel glass: key price factors, OEM vs aftermarket options, insurance deductibles, estimates, and smart ways to save.
Fixed Quarter Window vs Vent Glass on Audi A5 Sport: Ordering the Correct Replacement
Fixed quarter window vs vent glass on Audi A5 Sport: how to identify yours and order the correct replacement for fit, sealing, and safety—read this now.
OEM-Quality Quarter Glass Replacement for Audi A5 Sport: Fit, Trim, and Weather-Seal Checklist
OEM-quality quarter glass replacement for Audi A5 Sport: fit, trim, and weather-seal checklist for correct install, leak prevention, and clean finish.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm