Services
Service Areas
Do You Need ADAS Calibration for Cadillac Xt4 After a Wheel Alignment? When Alignment Changes Affect Cameras and Radar
A Cadillac Xt4 can drive straight after an alignment and still have ADAS that’s slightly out of sync if the reference angles changed. Lane-keeping assist and lane departure warning use lane lines from the forward camera, but the software also depends on the vehicle’s calibrated centerline and an accurate steering angle sensor (SAS) baseline. ACC and AEB likewise assume the camera/radar are aimed relative to the true direction of travel. When a technician adjusts toe, camber, caster, or corrects thrust angle, the Cadillac Xt4 may follow a subtly different path than before. If the SAS zero point and sensor aiming are not updated, the system can misread what “straight ahead” is. That’s why OEM workflows often pair alignment with a scan-tool routine: pre-scan for stored codes, SAS reset or relearn, then calibration verification for the front camera and/or radar using static targets, a dynamic road drive, or both. A practical red flag is an alignment invoice with no post-scan results or calibration documentation. In real driving, miscalibration can feel like drifting lane centering, ACC that changes following behavior unexpectedly, or warnings that trigger too early or too late. Choose providers that confirm alignment specs first and then record the calibration outcome.
Cadillac Xt4 ADAS Calibration After Suspension Work: Ride Height, Steering Angle Sensors, and Why Pricing Varies
Repairs that alter suspension or steering geometry on a Cadillac Xt4—springs, struts, control arms, ball joints, tie rods, or a steering rack—can be enough to require ADAS calibration because sensor angles change with ride height and alignment. ADAS modules convert camera/radar input into measured angles and distances; even small height changes can shift camera pitch/yaw and radar aim, while toe and thrust-angle corrections change how the vehicle tracks relative to its calibrated centerline. Those changes affect how the steering angle sensor (SAS), yaw-rate sensor, and wheel-speed signals drive lane-centering and ACC distance control. Many OEM procedures for a Cadillac Xt4 therefore set prerequisites: verify tire size and pressure, confirm ride height, check for play, then perform a four-wheel alignment within spec before running any camera calibration, radar calibration, or SAS reset. Quotes vary because the required steps vary—some trims need only a dynamic road routine; others require static targets; some need both, and multiple systems (front camera, front radar, blind-spot or parking sensors) may need checks. Because results depend on a controlled setup (level floor, correct target placement, proper lighting), calibration is best treated as the final step of the repair. Ask for the completed calibration report.
ADAS Calibration for Cadillac Xt4 After a Minor Collision: Even Without Visible Damage, Sensors Can Shift
After a minor collision in a Cadillac Xt4, ADAS calibration is commonly missed because the car may appear normal. However, radar and camera assemblies are aimed within very small tolerances. A low-speed rear-end, parking-lot hit, or curb strike can shift a radar bracket behind the bumper cover or disturb a camera mount by only millimeters, yet that can change how ACC, AEB, lane-keeping assist, and forward collision warning behave. It also may not set a warning light; some systems log diagnostic trouble codes that only show on a scan, while others operate with reduced accuracy until you notice phantom alerts or inconsistent following distance. A safer workflow is a diagnostic pre-scan, any manufacturer-required aiming/calibration (static targets, dynamic road routine, or both), and a post-scan confirming normal module status, with the calibration report saved for your records and insurance file. If the impact also caused a chipped or cracked windshield—especially on Cadillac Xt4 trims with windshield-mounted cameras—Bang AutoGlass can provide mobile windshield replacement when scheduling allows. Most installs take 30–45 minutes, and we recommend at least one hour of safe drive time for adhesive cure. We can also help you document what happened and connect you to an appropriate calibration resource.
Signs Your Cadillac Xt4 ADAS Needs Calibration: Warning Lights, Lane-Keeping Pull, ACC Issues, and False Alerts
On a Cadillac Xt4, ADAS calibration problems do not always look like a dramatic failure. A dashboard message for the camera, radar, lane assist, or ACC is a clear indicator, but many drivers notice subtle changes first: lane-keeping that favors one side, lane departure warnings that feel overly sensitive, or lane-centering that wanders on roads with clear markings. Adaptive cruise control (ACC) may brake too aggressively, vary the following gap, or react late to vehicles ahead. You might also get random forward-collision warnings or blind-spot alerts at the wrong times. These symptoms can happen when sensor aim is slightly off, a radar bracket shifted, a windshield-mounted camera moved, or the steering angle sensor baseline no longer matches straight-ahead. The best clue is timing. If the behavior began after windshield replacement, alignment, suspension/steering repair, bumper work, or a minor impact, treat calibration verification as a safety step. An OEM-aligned approach is: scan for codes, confirm prerequisites (tires, ride height, alignment), complete static and/or dynamic calibration, then document results. If cracked glass is involved, Bang AutoGlass provides next-day mobile windshield replacement when scheduling allows. Most replacements take 30-45 minutes, plus at least one hour of safe drive time for adhesive cure, and are backed by a lifetime workmanship warranty.
How Shops Confirm Cadillac Xt4 ADAS Is In-Spec: Pre-Scan/Post-Scan, Alignment Specs, and Calibration Reports
To verify your Cadillac Xt4 ADAS is truly in-spec, a quality shop relies on process and documentation, not a quick drive. Step one is a pre-repair diagnostic scan to capture diagnostic trouble codes (DTCs), module communication status, and any stored ADAS history faults. Next, they confirm the mechanical items that make calibration valid: correct tire size and pressure, proper ride height, no looseness in steering or suspension, and a four-wheel alignment within spec (including thrust angle). Because ADAS targets vehicle geometry, even small alignment or ride-height errors can compromise camera calibration and radar calibration. With prerequisites met, the shop checks the exact ADAS configuration on your Cadillac Xt4 and selects the required OEM procedures for the repair event. Calibration may be static (targets placed at measured distances and heights on a level floor with controlled lighting) and/or dynamic (a scan-tool initiated road routine completed under defined speed, lane-marking, and weather conditions). After the routine, a post-scan confirms codes are cleared and systems report normal operation. Ask for proof: pre-scan/post-scan printouts, alignment measurements when applicable, and the ADAS calibration report (certificate) showing successful completion and final status.
Insurance and Warranty Questions for Cadillac Xt4 ADAS Calibration: What’s Typically Covered and What to Document
For Cadillac Xt4 owners, ADAS calibration usually raises two questions: will insurance pay, and what records should you keep? Coverage depends on the trigger. If calibration is needed because of collision repair (bumper damage, sensor bracket replacement, suspension impact), it is commonly addressed under collision coverage. If calibration is required after windshield replacement on a Cadillac Xt4 with a windshield-mounted camera, it is often processed under comprehensive coverage. Carrier rules, deductibles, and policy language vary, so confirm whether scanning, aiming, and camera/radar calibration are reimbursable line items. Your best strategy is to document the chain of necessity. Keep a repair order that states the event (windshield replacement, alignment, suspension work, or minor collision), photos of the affected area, alignment reports if geometry was involved, and the pre-scan/post-scan printouts. The critical item is the ADAS calibration report showing the procedure completed and a final pass status. Itemized invoices that separate glass, scanning, and calibration help prevent confusion. Bang AutoGlass can assist with the glass portion and paperwork. We work with all insurance companies when comprehensive coverage applies and offer next-day mobile service when scheduling allows. Most windshield replacements take 30-45 minutes, plus at least one hour of safe drive time for adhesive cure, backed by a lifetime workmanship warranty.
Services
Service Areas
Do You Need ADAS Calibration for Cadillac Xt4 After a Wheel Alignment? When Alignment Changes Affect Cameras and Radar
A Cadillac Xt4 can drive straight after an alignment and still have ADAS that’s slightly out of sync if the reference angles changed. Lane-keeping assist and lane departure warning use lane lines from the forward camera, but the software also depends on the vehicle’s calibrated centerline and an accurate steering angle sensor (SAS) baseline. ACC and AEB likewise assume the camera/radar are aimed relative to the true direction of travel. When a technician adjusts toe, camber, caster, or corrects thrust angle, the Cadillac Xt4 may follow a subtly different path than before. If the SAS zero point and sensor aiming are not updated, the system can misread what “straight ahead” is. That’s why OEM workflows often pair alignment with a scan-tool routine: pre-scan for stored codes, SAS reset or relearn, then calibration verification for the front camera and/or radar using static targets, a dynamic road drive, or both. A practical red flag is an alignment invoice with no post-scan results or calibration documentation. In real driving, miscalibration can feel like drifting lane centering, ACC that changes following behavior unexpectedly, or warnings that trigger too early or too late. Choose providers that confirm alignment specs first and then record the calibration outcome.
Cadillac Xt4 ADAS Calibration After Suspension Work: Ride Height, Steering Angle Sensors, and Why Pricing Varies
Repairs that alter suspension or steering geometry on a Cadillac Xt4—springs, struts, control arms, ball joints, tie rods, or a steering rack—can be enough to require ADAS calibration because sensor angles change with ride height and alignment. ADAS modules convert camera/radar input into measured angles and distances; even small height changes can shift camera pitch/yaw and radar aim, while toe and thrust-angle corrections change how the vehicle tracks relative to its calibrated centerline. Those changes affect how the steering angle sensor (SAS), yaw-rate sensor, and wheel-speed signals drive lane-centering and ACC distance control. Many OEM procedures for a Cadillac Xt4 therefore set prerequisites: verify tire size and pressure, confirm ride height, check for play, then perform a four-wheel alignment within spec before running any camera calibration, radar calibration, or SAS reset. Quotes vary because the required steps vary—some trims need only a dynamic road routine; others require static targets; some need both, and multiple systems (front camera, front radar, blind-spot or parking sensors) may need checks. Because results depend on a controlled setup (level floor, correct target placement, proper lighting), calibration is best treated as the final step of the repair. Ask for the completed calibration report.
ADAS Calibration for Cadillac Xt4 After a Minor Collision: Even Without Visible Damage, Sensors Can Shift
After a minor collision in a Cadillac Xt4, ADAS calibration is commonly missed because the car may appear normal. However, radar and camera assemblies are aimed within very small tolerances. A low-speed rear-end, parking-lot hit, or curb strike can shift a radar bracket behind the bumper cover or disturb a camera mount by only millimeters, yet that can change how ACC, AEB, lane-keeping assist, and forward collision warning behave. It also may not set a warning light; some systems log diagnostic trouble codes that only show on a scan, while others operate with reduced accuracy until you notice phantom alerts or inconsistent following distance. A safer workflow is a diagnostic pre-scan, any manufacturer-required aiming/calibration (static targets, dynamic road routine, or both), and a post-scan confirming normal module status, with the calibration report saved for your records and insurance file. If the impact also caused a chipped or cracked windshield—especially on Cadillac Xt4 trims with windshield-mounted cameras—Bang AutoGlass can provide mobile windshield replacement when scheduling allows. Most installs take 30–45 minutes, and we recommend at least one hour of safe drive time for adhesive cure. We can also help you document what happened and connect you to an appropriate calibration resource.
Signs Your Cadillac Xt4 ADAS Needs Calibration: Warning Lights, Lane-Keeping Pull, ACC Issues, and False Alerts
On a Cadillac Xt4, ADAS calibration problems do not always look like a dramatic failure. A dashboard message for the camera, radar, lane assist, or ACC is a clear indicator, but many drivers notice subtle changes first: lane-keeping that favors one side, lane departure warnings that feel overly sensitive, or lane-centering that wanders on roads with clear markings. Adaptive cruise control (ACC) may brake too aggressively, vary the following gap, or react late to vehicles ahead. You might also get random forward-collision warnings or blind-spot alerts at the wrong times. These symptoms can happen when sensor aim is slightly off, a radar bracket shifted, a windshield-mounted camera moved, or the steering angle sensor baseline no longer matches straight-ahead. The best clue is timing. If the behavior began after windshield replacement, alignment, suspension/steering repair, bumper work, or a minor impact, treat calibration verification as a safety step. An OEM-aligned approach is: scan for codes, confirm prerequisites (tires, ride height, alignment), complete static and/or dynamic calibration, then document results. If cracked glass is involved, Bang AutoGlass provides next-day mobile windshield replacement when scheduling allows. Most replacements take 30-45 minutes, plus at least one hour of safe drive time for adhesive cure, and are backed by a lifetime workmanship warranty.
How Shops Confirm Cadillac Xt4 ADAS Is In-Spec: Pre-Scan/Post-Scan, Alignment Specs, and Calibration Reports
To verify your Cadillac Xt4 ADAS is truly in-spec, a quality shop relies on process and documentation, not a quick drive. Step one is a pre-repair diagnostic scan to capture diagnostic trouble codes (DTCs), module communication status, and any stored ADAS history faults. Next, they confirm the mechanical items that make calibration valid: correct tire size and pressure, proper ride height, no looseness in steering or suspension, and a four-wheel alignment within spec (including thrust angle). Because ADAS targets vehicle geometry, even small alignment or ride-height errors can compromise camera calibration and radar calibration. With prerequisites met, the shop checks the exact ADAS configuration on your Cadillac Xt4 and selects the required OEM procedures for the repair event. Calibration may be static (targets placed at measured distances and heights on a level floor with controlled lighting) and/or dynamic (a scan-tool initiated road routine completed under defined speed, lane-marking, and weather conditions). After the routine, a post-scan confirms codes are cleared and systems report normal operation. Ask for proof: pre-scan/post-scan printouts, alignment measurements when applicable, and the ADAS calibration report (certificate) showing successful completion and final status.
Insurance and Warranty Questions for Cadillac Xt4 ADAS Calibration: What’s Typically Covered and What to Document
For Cadillac Xt4 owners, ADAS calibration usually raises two questions: will insurance pay, and what records should you keep? Coverage depends on the trigger. If calibration is needed because of collision repair (bumper damage, sensor bracket replacement, suspension impact), it is commonly addressed under collision coverage. If calibration is required after windshield replacement on a Cadillac Xt4 with a windshield-mounted camera, it is often processed under comprehensive coverage. Carrier rules, deductibles, and policy language vary, so confirm whether scanning, aiming, and camera/radar calibration are reimbursable line items. Your best strategy is to document the chain of necessity. Keep a repair order that states the event (windshield replacement, alignment, suspension work, or minor collision), photos of the affected area, alignment reports if geometry was involved, and the pre-scan/post-scan printouts. The critical item is the ADAS calibration report showing the procedure completed and a final pass status. Itemized invoices that separate glass, scanning, and calibration help prevent confusion. Bang AutoGlass can assist with the glass portion and paperwork. We work with all insurance companies when comprehensive coverage applies and offer next-day mobile service when scheduling allows. Most windshield replacements take 30-45 minutes, plus at least one hour of safe drive time for adhesive cure, backed by a lifetime workmanship warranty.
Services
Service Areas
Do You Need ADAS Calibration for Cadillac Xt4 After a Wheel Alignment? When Alignment Changes Affect Cameras and Radar
A Cadillac Xt4 can drive straight after an alignment and still have ADAS that’s slightly out of sync if the reference angles changed. Lane-keeping assist and lane departure warning use lane lines from the forward camera, but the software also depends on the vehicle’s calibrated centerline and an accurate steering angle sensor (SAS) baseline. ACC and AEB likewise assume the camera/radar are aimed relative to the true direction of travel. When a technician adjusts toe, camber, caster, or corrects thrust angle, the Cadillac Xt4 may follow a subtly different path than before. If the SAS zero point and sensor aiming are not updated, the system can misread what “straight ahead” is. That’s why OEM workflows often pair alignment with a scan-tool routine: pre-scan for stored codes, SAS reset or relearn, then calibration verification for the front camera and/or radar using static targets, a dynamic road drive, or both. A practical red flag is an alignment invoice with no post-scan results or calibration documentation. In real driving, miscalibration can feel like drifting lane centering, ACC that changes following behavior unexpectedly, or warnings that trigger too early or too late. Choose providers that confirm alignment specs first and then record the calibration outcome.
Cadillac Xt4 ADAS Calibration After Suspension Work: Ride Height, Steering Angle Sensors, and Why Pricing Varies
Repairs that alter suspension or steering geometry on a Cadillac Xt4—springs, struts, control arms, ball joints, tie rods, or a steering rack—can be enough to require ADAS calibration because sensor angles change with ride height and alignment. ADAS modules convert camera/radar input into measured angles and distances; even small height changes can shift camera pitch/yaw and radar aim, while toe and thrust-angle corrections change how the vehicle tracks relative to its calibrated centerline. Those changes affect how the steering angle sensor (SAS), yaw-rate sensor, and wheel-speed signals drive lane-centering and ACC distance control. Many OEM procedures for a Cadillac Xt4 therefore set prerequisites: verify tire size and pressure, confirm ride height, check for play, then perform a four-wheel alignment within spec before running any camera calibration, radar calibration, or SAS reset. Quotes vary because the required steps vary—some trims need only a dynamic road routine; others require static targets; some need both, and multiple systems (front camera, front radar, blind-spot or parking sensors) may need checks. Because results depend on a controlled setup (level floor, correct target placement, proper lighting), calibration is best treated as the final step of the repair. Ask for the completed calibration report.
ADAS Calibration for Cadillac Xt4 After a Minor Collision: Even Without Visible Damage, Sensors Can Shift
After a minor collision in a Cadillac Xt4, ADAS calibration is commonly missed because the car may appear normal. However, radar and camera assemblies are aimed within very small tolerances. A low-speed rear-end, parking-lot hit, or curb strike can shift a radar bracket behind the bumper cover or disturb a camera mount by only millimeters, yet that can change how ACC, AEB, lane-keeping assist, and forward collision warning behave. It also may not set a warning light; some systems log diagnostic trouble codes that only show on a scan, while others operate with reduced accuracy until you notice phantom alerts or inconsistent following distance. A safer workflow is a diagnostic pre-scan, any manufacturer-required aiming/calibration (static targets, dynamic road routine, or both), and a post-scan confirming normal module status, with the calibration report saved for your records and insurance file. If the impact also caused a chipped or cracked windshield—especially on Cadillac Xt4 trims with windshield-mounted cameras—Bang AutoGlass can provide mobile windshield replacement when scheduling allows. Most installs take 30–45 minutes, and we recommend at least one hour of safe drive time for adhesive cure. We can also help you document what happened and connect you to an appropriate calibration resource.
Signs Your Cadillac Xt4 ADAS Needs Calibration: Warning Lights, Lane-Keeping Pull, ACC Issues, and False Alerts
On a Cadillac Xt4, ADAS calibration problems do not always look like a dramatic failure. A dashboard message for the camera, radar, lane assist, or ACC is a clear indicator, but many drivers notice subtle changes first: lane-keeping that favors one side, lane departure warnings that feel overly sensitive, or lane-centering that wanders on roads with clear markings. Adaptive cruise control (ACC) may brake too aggressively, vary the following gap, or react late to vehicles ahead. You might also get random forward-collision warnings or blind-spot alerts at the wrong times. These symptoms can happen when sensor aim is slightly off, a radar bracket shifted, a windshield-mounted camera moved, or the steering angle sensor baseline no longer matches straight-ahead. The best clue is timing. If the behavior began after windshield replacement, alignment, suspension/steering repair, bumper work, or a minor impact, treat calibration verification as a safety step. An OEM-aligned approach is: scan for codes, confirm prerequisites (tires, ride height, alignment), complete static and/or dynamic calibration, then document results. If cracked glass is involved, Bang AutoGlass provides next-day mobile windshield replacement when scheduling allows. Most replacements take 30-45 minutes, plus at least one hour of safe drive time for adhesive cure, and are backed by a lifetime workmanship warranty.
How Shops Confirm Cadillac Xt4 ADAS Is In-Spec: Pre-Scan/Post-Scan, Alignment Specs, and Calibration Reports
To verify your Cadillac Xt4 ADAS is truly in-spec, a quality shop relies on process and documentation, not a quick drive. Step one is a pre-repair diagnostic scan to capture diagnostic trouble codes (DTCs), module communication status, and any stored ADAS history faults. Next, they confirm the mechanical items that make calibration valid: correct tire size and pressure, proper ride height, no looseness in steering or suspension, and a four-wheel alignment within spec (including thrust angle). Because ADAS targets vehicle geometry, even small alignment or ride-height errors can compromise camera calibration and radar calibration. With prerequisites met, the shop checks the exact ADAS configuration on your Cadillac Xt4 and selects the required OEM procedures for the repair event. Calibration may be static (targets placed at measured distances and heights on a level floor with controlled lighting) and/or dynamic (a scan-tool initiated road routine completed under defined speed, lane-marking, and weather conditions). After the routine, a post-scan confirms codes are cleared and systems report normal operation. Ask for proof: pre-scan/post-scan printouts, alignment measurements when applicable, and the ADAS calibration report (certificate) showing successful completion and final status.
Insurance and Warranty Questions for Cadillac Xt4 ADAS Calibration: What’s Typically Covered and What to Document
For Cadillac Xt4 owners, ADAS calibration usually raises two questions: will insurance pay, and what records should you keep? Coverage depends on the trigger. If calibration is needed because of collision repair (bumper damage, sensor bracket replacement, suspension impact), it is commonly addressed under collision coverage. If calibration is required after windshield replacement on a Cadillac Xt4 with a windshield-mounted camera, it is often processed under comprehensive coverage. Carrier rules, deductibles, and policy language vary, so confirm whether scanning, aiming, and camera/radar calibration are reimbursable line items. Your best strategy is to document the chain of necessity. Keep a repair order that states the event (windshield replacement, alignment, suspension work, or minor collision), photos of the affected area, alignment reports if geometry was involved, and the pre-scan/post-scan printouts. The critical item is the ADAS calibration report showing the procedure completed and a final pass status. Itemized invoices that separate glass, scanning, and calibration help prevent confusion. Bang AutoGlass can assist with the glass portion and paperwork. We work with all insurance companies when comprehensive coverage applies and offer next-day mobile service when scheduling allows. Most windshield replacements take 30-45 minutes, plus at least one hour of safe drive time for adhesive cure, backed by a lifetime workmanship warranty.
Enjoy More Relevant Blogs
Camera Calibration for Cadillac Xt4: Lane Assist and Forward Collision Accuracy Explained
Need camera calibration for your Cadillac Xt4? See how calibration affects lane assist and forward collision accuracy after windshield service or repairs.
How to Schedule ADAS Calibration for Cadillac Xt4 After Windshield Replacement
Schedule ADAS calibration for Cadillac Xt4 after windshield replacement. Learn timing, required info, and what to expect so safety systems stay accurate.
Static vs Dynamic ADAS Calibration for Cadillac Xt4: What the Difference Means
Static vs dynamic ADAS calibration for Cadillac Xt4: key differences, when each is required, how long it takes, and what affects accuracy for safety.
OEM Calibration Requirements for Cadillac Xt4: How to Confirm What Must Be Calibrated
OEM calibration requirements for Cadillac Xt4: how to confirm what must be calibrated after repairs, what triggers recalibration, and what proof to ask for.
Pre- and Post-Calibration Scans for Cadillac Xt4: Proving Systems Are Set Correctly
Pre- and post-calibration scans for Cadillac Xt4: see why scans matter, what they verify, and how reports prove ADAS systems are set correctly after service.
ADAS Calibration Checklist for Cadillac Xt4: Documentation, Verification, and Final Safety Checks
ADAS calibration checklist for Cadillac Xt4: documentation to request, scans to verify, and safety checks that confirm cameras and sensors are set right.
ADAS Warning Lights on Cadillac Xt4: When Calibration Is the Fix and When It’s Not
ADAS warning lights on your Cadillac Xt4? Learn when calibration fixes lane assist or AEB issues, when it will not, and what to check next. Schedule help.
Mobile ADAS Calibration for Cadillac Xt4: What to Expect On-Site and Why Setup Matters
Mobile ADAS calibration for Cadillac Xt4: what to expect on-site, space and lighting needs, and why setup and verification matter after repairs today.
How Much Does ADAS Calibration Cost for Cadillac Xt4? What Drives Pricing and What Insurance Typically Covers
How much does ADAS calibration cost for a Cadillac Xt4? Learn pricing drivers, camera vs radar needs, labor time, and what insurance typically covers.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm