Services
Service Areas
How Long Does Rear Glass Replacement Take on Chevrolet Lumina Cargo? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Chevrolet Lumina Cargo Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
A Chevrolet Lumina Cargo rear glass replacement often seems to take longer than expected because the clock includes more than the swap itself. Even if a traditional shop can replace the back glass in 1–3 hours of labor, the overall timeline can grow due to part availability, paperwork, drop-off logistics, and the time required after installation before the vehicle should be driven. Technicians remove the damaged rear windshield/back glass, vacuum and clear fragments, prep the bonding surface, and then set the new rear window in fresh urethane with precise alignment so the seal is even. Bang AutoGlass makes the process easier by bringing mobile auto glass service to you. For most Chevrolet Lumina Cargo rear window replacements, the hands-on work typically takes about 30–45 minutes. We then ask you to keep the vehicle parked for at least 1 hour so the urethane reaches a conservative safe drive-away baseline. Many customers schedule the service like an extended meeting, not an all-day errand. If you’re using insurance, rear glass replacement is usually processed under comprehensive coverage, and we can work with any carrier that provides it. Our lifetime workmanship warranty backs the installation for long-term peace of mind.
Chevrolet Lumina Cargo Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
The install time for a Chevrolet Lumina Cargo rear window replacement depends on completing each step efficiently without cutting corners. We start by protecting interior surfaces, removing trim and moldings, and disconnecting anything tied to the back glass, such as defroster tabs or an integrated antenna lead. If the rear window shattered, loose fragments are removed and the parcel shelf, cargo area, and vents are vacuumed so glass chips don’t linger. Next is surface preparation on the pinch weld: old urethane is cut back, the area is cleaned and decontaminated, and any rust is addressed so the new adhesive bonds consistently. Depending on the adhesive system, primer or activator is applied to promote adhesion and help prevent corrosion. Fresh automotive urethane is then laid in a continuous bead, and the new rear windshield/back glass is set with precise alignment so the perimeter seats evenly and the hatch or trunk closes correctly. We finish by reinstalling moldings, verifying defroster connector alignment, applying retention tape if needed, and performing a quick inspection to catch gaps that can lead to wind noise or leaks. At Bang AutoGlass, this workflow typically takes about 30–45 minutes of hands-on work for most Chevrolet Lumina Cargo back glass replacements, followed by the required stationary set time before driving.
Urethane Cure Time for Chevrolet Lumina Cargo Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Chevrolet Lumina Cargo back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Chevrolet Lumina Cargo rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Chevrolet Lumina Cargo Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Cure time for a Chevrolet Lumina Cargo rear window replacement isn’t a single fixed number. The urethane must reach its minimum bond threshold (MDAT/SDAT) before the vehicle should be driven, and that threshold shifts with the adhesive system and the environment. Cooler temperatures generally slow moisture-cure chemistry, and low humidity can slow it further because the urethane needs ambient moisture to build strength. Warm conditions often help cure faster, but very hot, dry days can reduce open time and change how the bead handles during installation. That’s why adhesive selection matters: fast-cure urethanes are formulated to hit drive-away targets sooner within defined ranges, while conventional products may require longer stationary time; specialty systems may be chosen when temperatures are extremely low. The size and shape of the glass also influences outcomes. Bigger rear windshields/back glass—common on hatchbacks and SUVs—have more surface area and leverage, so consistent bead height, correct primers, and meticulous pinch-weld preparation are essential for even compression and sealing. Rust, old urethane high spots, oils, or dust can undermine adhesion and demand extra prep. Bang AutoGlass evaluates conditions on site for your Chevrolet Lumina Cargo, chooses the right materials, and gives you a simple, vehicle-specific drive-away plan.
When Is It Safe to Drive After Chevrolet Lumina Cargo Rear Glass Replacement? Practical Drive-Away Rules
Safe drive-away after a Chevrolet Lumina Cargo rear glass replacement is determined by MDAT/SDAT—the minimum time the urethane must sit undisturbed to reach enough early strength for normal driving. Those times are not universal. They depend on the exact urethane product and on temperature and humidity during the install, so reputable technicians reference the adhesive manufacturer’s product data sheet instead of guessing. Under favorable conditions, some fast-cure systems can reach drive-away strength sooner, but cold or dry weather often extends the required wait; extreme heat can also alter working time and cure performance. For scheduling, treat the first hour as protected time. Bang AutoGlass requires at least 1 hour with your Chevrolet Lumina Cargo parked after the back glass is installed before it is safe to drive. Don’t move it around a lot, don’t “creep it forward,” and don’t run quick errands. Once you’re cleared, take it easy for the rest of the day: avoid potholes and rough roads, close doors and the liftgate gently, and skip high-speed driving until the bond continues to mature. Insurance claims for rear window replacement are typically comprehensive, and every job is covered by our lifetime workmanship warranty.
Chevrolet Lumina Cargo Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
After a Chevrolet Lumina Cargo rear glass replacement, good aftercare protects the fresh urethane bond while it continues curing. First, follow the drive-away time you’re given; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is applied, leave it in place—its job is to stabilize the back glass and keep moldings aligned while the urethane sets. A common guideline is about 24 hours (sometimes up to 48 hours) before removing tape. For the first 24–48 hours, avoid automated car washes, pressure washing, or directing high-pressure water at the window perimeter, since force and chemicals can disturb an immature seal. Use gentle habits early on: close doors and the liftgate softly to reduce cabin-pressure spikes, and avoid rough construction roads that twist the body and load the new glass. After your first drive or first rain, do a quick leak/wind-noise check around trim and the cargo area, and call promptly if anything seems off. Finally, protect the rear defroster grid—clean inside glass with a soft microfiber cloth and mild cleaner, avoiding razors or abrasive pads.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Chevrolet Lumina Cargo? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Chevrolet Lumina Cargo Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
A Chevrolet Lumina Cargo rear glass replacement often seems to take longer than expected because the clock includes more than the swap itself. Even if a traditional shop can replace the back glass in 1–3 hours of labor, the overall timeline can grow due to part availability, paperwork, drop-off logistics, and the time required after installation before the vehicle should be driven. Technicians remove the damaged rear windshield/back glass, vacuum and clear fragments, prep the bonding surface, and then set the new rear window in fresh urethane with precise alignment so the seal is even. Bang AutoGlass makes the process easier by bringing mobile auto glass service to you. For most Chevrolet Lumina Cargo rear window replacements, the hands-on work typically takes about 30–45 minutes. We then ask you to keep the vehicle parked for at least 1 hour so the urethane reaches a conservative safe drive-away baseline. Many customers schedule the service like an extended meeting, not an all-day errand. If you’re using insurance, rear glass replacement is usually processed under comprehensive coverage, and we can work with any carrier that provides it. Our lifetime workmanship warranty backs the installation for long-term peace of mind.
Chevrolet Lumina Cargo Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
The install time for a Chevrolet Lumina Cargo rear window replacement depends on completing each step efficiently without cutting corners. We start by protecting interior surfaces, removing trim and moldings, and disconnecting anything tied to the back glass, such as defroster tabs or an integrated antenna lead. If the rear window shattered, loose fragments are removed and the parcel shelf, cargo area, and vents are vacuumed so glass chips don’t linger. Next is surface preparation on the pinch weld: old urethane is cut back, the area is cleaned and decontaminated, and any rust is addressed so the new adhesive bonds consistently. Depending on the adhesive system, primer or activator is applied to promote adhesion and help prevent corrosion. Fresh automotive urethane is then laid in a continuous bead, and the new rear windshield/back glass is set with precise alignment so the perimeter seats evenly and the hatch or trunk closes correctly. We finish by reinstalling moldings, verifying defroster connector alignment, applying retention tape if needed, and performing a quick inspection to catch gaps that can lead to wind noise or leaks. At Bang AutoGlass, this workflow typically takes about 30–45 minutes of hands-on work for most Chevrolet Lumina Cargo back glass replacements, followed by the required stationary set time before driving.
Urethane Cure Time for Chevrolet Lumina Cargo Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Chevrolet Lumina Cargo back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Chevrolet Lumina Cargo rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Chevrolet Lumina Cargo Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Cure time for a Chevrolet Lumina Cargo rear window replacement isn’t a single fixed number. The urethane must reach its minimum bond threshold (MDAT/SDAT) before the vehicle should be driven, and that threshold shifts with the adhesive system and the environment. Cooler temperatures generally slow moisture-cure chemistry, and low humidity can slow it further because the urethane needs ambient moisture to build strength. Warm conditions often help cure faster, but very hot, dry days can reduce open time and change how the bead handles during installation. That’s why adhesive selection matters: fast-cure urethanes are formulated to hit drive-away targets sooner within defined ranges, while conventional products may require longer stationary time; specialty systems may be chosen when temperatures are extremely low. The size and shape of the glass also influences outcomes. Bigger rear windshields/back glass—common on hatchbacks and SUVs—have more surface area and leverage, so consistent bead height, correct primers, and meticulous pinch-weld preparation are essential for even compression and sealing. Rust, old urethane high spots, oils, or dust can undermine adhesion and demand extra prep. Bang AutoGlass evaluates conditions on site for your Chevrolet Lumina Cargo, chooses the right materials, and gives you a simple, vehicle-specific drive-away plan.
When Is It Safe to Drive After Chevrolet Lumina Cargo Rear Glass Replacement? Practical Drive-Away Rules
Safe drive-away after a Chevrolet Lumina Cargo rear glass replacement is determined by MDAT/SDAT—the minimum time the urethane must sit undisturbed to reach enough early strength for normal driving. Those times are not universal. They depend on the exact urethane product and on temperature and humidity during the install, so reputable technicians reference the adhesive manufacturer’s product data sheet instead of guessing. Under favorable conditions, some fast-cure systems can reach drive-away strength sooner, but cold or dry weather often extends the required wait; extreme heat can also alter working time and cure performance. For scheduling, treat the first hour as protected time. Bang AutoGlass requires at least 1 hour with your Chevrolet Lumina Cargo parked after the back glass is installed before it is safe to drive. Don’t move it around a lot, don’t “creep it forward,” and don’t run quick errands. Once you’re cleared, take it easy for the rest of the day: avoid potholes and rough roads, close doors and the liftgate gently, and skip high-speed driving until the bond continues to mature. Insurance claims for rear window replacement are typically comprehensive, and every job is covered by our lifetime workmanship warranty.
Chevrolet Lumina Cargo Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
After a Chevrolet Lumina Cargo rear glass replacement, good aftercare protects the fresh urethane bond while it continues curing. First, follow the drive-away time you’re given; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is applied, leave it in place—its job is to stabilize the back glass and keep moldings aligned while the urethane sets. A common guideline is about 24 hours (sometimes up to 48 hours) before removing tape. For the first 24–48 hours, avoid automated car washes, pressure washing, or directing high-pressure water at the window perimeter, since force and chemicals can disturb an immature seal. Use gentle habits early on: close doors and the liftgate softly to reduce cabin-pressure spikes, and avoid rough construction roads that twist the body and load the new glass. After your first drive or first rain, do a quick leak/wind-noise check around trim and the cargo area, and call promptly if anything seems off. Finally, protect the rear defroster grid—clean inside glass with a soft microfiber cloth and mild cleaner, avoiding razors or abrasive pads.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Chevrolet Lumina Cargo? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Chevrolet Lumina Cargo Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
A Chevrolet Lumina Cargo rear glass replacement often seems to take longer than expected because the clock includes more than the swap itself. Even if a traditional shop can replace the back glass in 1–3 hours of labor, the overall timeline can grow due to part availability, paperwork, drop-off logistics, and the time required after installation before the vehicle should be driven. Technicians remove the damaged rear windshield/back glass, vacuum and clear fragments, prep the bonding surface, and then set the new rear window in fresh urethane with precise alignment so the seal is even. Bang AutoGlass makes the process easier by bringing mobile auto glass service to you. For most Chevrolet Lumina Cargo rear window replacements, the hands-on work typically takes about 30–45 minutes. We then ask you to keep the vehicle parked for at least 1 hour so the urethane reaches a conservative safe drive-away baseline. Many customers schedule the service like an extended meeting, not an all-day errand. If you’re using insurance, rear glass replacement is usually processed under comprehensive coverage, and we can work with any carrier that provides it. Our lifetime workmanship warranty backs the installation for long-term peace of mind.
Chevrolet Lumina Cargo Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
The install time for a Chevrolet Lumina Cargo rear window replacement depends on completing each step efficiently without cutting corners. We start by protecting interior surfaces, removing trim and moldings, and disconnecting anything tied to the back glass, such as defroster tabs or an integrated antenna lead. If the rear window shattered, loose fragments are removed and the parcel shelf, cargo area, and vents are vacuumed so glass chips don’t linger. Next is surface preparation on the pinch weld: old urethane is cut back, the area is cleaned and decontaminated, and any rust is addressed so the new adhesive bonds consistently. Depending on the adhesive system, primer or activator is applied to promote adhesion and help prevent corrosion. Fresh automotive urethane is then laid in a continuous bead, and the new rear windshield/back glass is set with precise alignment so the perimeter seats evenly and the hatch or trunk closes correctly. We finish by reinstalling moldings, verifying defroster connector alignment, applying retention tape if needed, and performing a quick inspection to catch gaps that can lead to wind noise or leaks. At Bang AutoGlass, this workflow typically takes about 30–45 minutes of hands-on work for most Chevrolet Lumina Cargo back glass replacements, followed by the required stationary set time before driving.
Urethane Cure Time for Chevrolet Lumina Cargo Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
Urethane set and cure time is why a Chevrolet Lumina Cargo back glass replacement isn’t “done” the moment the new rear window looks aligned. Rear glass is bonded with structural automotive urethane that must reach a safety threshold before the vehicle is driven. You may hear two terms: SDAT (Safe Drive-Away Time) and MDAT (Minimum Drive-Away Time). Both describe the minimum stationary time required after installation so the adhesive achieves safe early retention. Hitting SDAT/MDAT does not mean the urethane is fully cured; it continues gaining strength for hours as the chemistry finishes. Drive-away time varies by adhesive brand and formula, and by conditions such as temperature and humidity—cold or very dry air can slow curing, while certain fast-cure systems can shorten the window under ideal conditions. A professional installer should follow the urethane manufacturer’s product data sheet for the specific product used and provide a clear recommendation for your vehicle and environment. For customer planning, Bang AutoGlass uses a straightforward, conservative baseline for Chevrolet Lumina Cargo rear glass replacement: keep the vehicle parked for at least 1 hour before it’s safe to drive. This helps protect the fresh bond, supports proper sealing, and reduces the risk of movement that can cause leaks or wind noise.
What Affects Chevrolet Lumina Cargo Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Cure time for a Chevrolet Lumina Cargo rear window replacement isn’t a single fixed number. The urethane must reach its minimum bond threshold (MDAT/SDAT) before the vehicle should be driven, and that threshold shifts with the adhesive system and the environment. Cooler temperatures generally slow moisture-cure chemistry, and low humidity can slow it further because the urethane needs ambient moisture to build strength. Warm conditions often help cure faster, but very hot, dry days can reduce open time and change how the bead handles during installation. That’s why adhesive selection matters: fast-cure urethanes are formulated to hit drive-away targets sooner within defined ranges, while conventional products may require longer stationary time; specialty systems may be chosen when temperatures are extremely low. The size and shape of the glass also influences outcomes. Bigger rear windshields/back glass—common on hatchbacks and SUVs—have more surface area and leverage, so consistent bead height, correct primers, and meticulous pinch-weld preparation are essential for even compression and sealing. Rust, old urethane high spots, oils, or dust can undermine adhesion and demand extra prep. Bang AutoGlass evaluates conditions on site for your Chevrolet Lumina Cargo, chooses the right materials, and gives you a simple, vehicle-specific drive-away plan.
When Is It Safe to Drive After Chevrolet Lumina Cargo Rear Glass Replacement? Practical Drive-Away Rules
Safe drive-away after a Chevrolet Lumina Cargo rear glass replacement is determined by MDAT/SDAT—the minimum time the urethane must sit undisturbed to reach enough early strength for normal driving. Those times are not universal. They depend on the exact urethane product and on temperature and humidity during the install, so reputable technicians reference the adhesive manufacturer’s product data sheet instead of guessing. Under favorable conditions, some fast-cure systems can reach drive-away strength sooner, but cold or dry weather often extends the required wait; extreme heat can also alter working time and cure performance. For scheduling, treat the first hour as protected time. Bang AutoGlass requires at least 1 hour with your Chevrolet Lumina Cargo parked after the back glass is installed before it is safe to drive. Don’t move it around a lot, don’t “creep it forward,” and don’t run quick errands. Once you’re cleared, take it easy for the rest of the day: avoid potholes and rough roads, close doors and the liftgate gently, and skip high-speed driving until the bond continues to mature. Insurance claims for rear window replacement are typically comprehensive, and every job is covered by our lifetime workmanship warranty.
Chevrolet Lumina Cargo Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
After a Chevrolet Lumina Cargo rear glass replacement, good aftercare protects the fresh urethane bond while it continues curing. First, follow the drive-away time you’re given; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is applied, leave it in place—its job is to stabilize the back glass and keep moldings aligned while the urethane sets. A common guideline is about 24 hours (sometimes up to 48 hours) before removing tape. For the first 24–48 hours, avoid automated car washes, pressure washing, or directing high-pressure water at the window perimeter, since force and chemicals can disturb an immature seal. Use gentle habits early on: close doors and the liftgate softly to reduce cabin-pressure spikes, and avoid rough construction roads that twist the body and load the new glass. After your first drive or first rain, do a quick leak/wind-noise check around trim and the cargo area, and call promptly if anything seems off. Finally, protect the rear defroster grid—clean inside glass with a soft microfiber cloth and mild cleaner, avoiding razors or abrasive pads.
Enjoy More Relevant Blogs
Rear Glass Replacement for Chevrolet Lumina Cargo: What to Expect During Install and Aftercare
Rear glass replacement for Chevrolet Lumina Cargo: what happens during install, defroster and tint considerations, cure time, and aftercare to prevent leaks long-term.
Tempered Safety Rear Glass Replacement for Chevrolet Lumina Cargo: Understanding DOT Markings and FMVSS 205
Need Chevrolet Lumina Cargo rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Shattered Back Window on Chevrolet Lumina Cargo: A Step-by-Step Rear Glass Replacement Plan
Shattered back window on Chevrolet Lumina Cargo? Follow a step-by-step rear glass replacement plan, cleanup tips, defroster notes, cure time, and drive-away rules.
Rear Defroster Not Working on Chevrolet Lumina Cargo? When Rear Glass Replacement Makes More Sense Than Repair
Rear defroster not working on your Chevrolet Lumina Cargo? Learn common causes, when repair fails, and when rear glass replacement is the smarter fix for winter.
Post-Install Checks for Chevrolet Lumina Cargo: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Chevrolet Lumina Cargo: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
OEM-Quality Rear Glass Replacement for Chevrolet Lumina Cargo: Defroster Grid and Tint-Match Checklist
OEM-quality rear glass replacement for Chevrolet Lumina Cargo: defroster grid and tint-match checklist, plus install tips to avoid callbacks—schedule service.
Back Glass Replacement on Chevrolet Lumina Cargo: Defroster Tabs, Antenna Lines, and Connector Reattachment Basics
Back glass replacement on Chevrolet Lumina Cargo: defroster tabs, antenna lines, and connectors explained, plus install tips to avoid damage and rework safely.
How Much Does Rear Glass Replacement Cost for Chevrolet Lumina Cargo? Pricing Factors, OEM vs Aftermarket, and Insurance Deductibles
Estimate Chevrolet Lumina Cargo rear glass replacement cost. Compare OEM vs aftermarket, labor factors, insurance deductibles, and ways to save. Request a quote.
How to Schedule Mobile Rear Glass Replacement for Chevrolet Lumina Cargo
Schedule mobile rear glass replacement for your Chevrolet Lumina Cargo in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm