Services
Service Areas
How Long Does Rear Glass Replacement Take on Chevrolet Malibu (Classic)? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Chevrolet Malibu (Classic) Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
If you’re wondering how long a Chevrolet Malibu (Classic) rear glass replacement takes, separate scheduling from install time. Many shops can handle the hands-on work in about 1–3 hours, but the total timeline can expand if the correct back glass must be sourced, the appointment is booked out, or the vehicle has to sit after installation for adhesive set time. The replacement itself is a step-by-step process: remove the damaged rear windshield/back glass, clear broken glass and old materials, prep the bonding surface, then set and align the new rear window in fresh urethane with final cleanup. Bang AutoGlass shortens downtime with mobile auto glass service at your home or office. For most Chevrolet Malibu (Classic) back glass jobs, our on-site removal, prep, install, and cleanup typically takes about 30–45 minutes once we begin. After the glass is set, we require at least 1 hour of stationary time before it’s safe to drive so the urethane reaches a conservative initial bond. Most customers plan a 90–120 minute window from technician arrival to safe drive-away. If you’re using insurance, rear window replacement is usually covered under comprehensive coverage, and we work with any carrier that offers it. Every replacement includes a lifetime workmanship warranty for long-term confidence.
Chevrolet Malibu (Classic) Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
Rear window replacement on a Chevrolet Malibu (Classic) is a controlled procedure, and install time reflects all the steps around the glass. After staging the work area, we remove the necessary interior and exterior trim and disconnect components that interface with the back glass, including defroster connections and, on some vehicles, an antenna lead. If the rear window is broken, careful cleanup comes first: shards are removed, then small fragments are vacuumed from the rear deck, cargo area, and crevices so you’re not finding glass later. Next we prep the pinch weld by trimming old urethane, cleaning and decontaminating the surface, and addressing any rust that could compromise sealing. Where required by the adhesive system, we apply primer/activator per manufacturer instructions. We then apply a uniform bead of automotive urethane and set the new rear windshield/back glass with correct positioning so it seats evenly around the perimeter. Trim is reinstalled, the defroster is reconnected and verified, and a final inspection checks molding alignment and visible gaps that can lead to leaks or wind noise. Bang AutoGlass keeps these steps efficient on-site; most Chevrolet Malibu (Classic) back glass installs take about 30–45 minutes of hands-on work, then the vehicle must remain parked for the required urethane set time before driving.
Urethane Cure Time for Chevrolet Malibu (Classic) Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
After a Chevrolet Malibu (Classic) rear glass replacement, the limiting factor is rarely installer speed—it’s the urethane’s set and cure profile. Modern back glass is bonded with structural urethane, and that bond needs time to develop enough early strength to tolerate normal driving loads. This is why you may hear MDAT (Minimum Drive-Away Time) or SDAT (Safe Drive-Away Time): both point to the minimum stationary interval after installation for safe early retention. Drive-away time is not the same as full cure; the adhesive continues strengthening well beyond MDAT/SDAT. The correct drive-away recommendation depends on the exact urethane product and the real-world conditions at install. Temperature and humidity matter—cold or dry conditions can slow curing—and fast-cure systems may differ from standard formulas. A professional technician should follow the urethane manufacturer’s product data sheet for the specific adhesive used and communicate the required wait time clearly. For straightforward planning, Bang AutoGlass uses a conservative baseline for Chevrolet Malibu (Classic) back glass service: keep the vehicle stationary for at least 1 hour before driving. This protects the fresh bond during its most vulnerable stage and helps maintain a stable seal as curing continues.
What Affects Chevrolet Malibu (Classic) Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Rear glass replacement cure time on a Chevrolet Malibu (Classic) depends on how fast the urethane adhesive can reach Minimum/Safe Drive-Away Time (MDAT/SDAT). Those times vary by adhesive formula and by conditions during service—especially ambient temperature and relative humidity. In colder weather, moisture-cure polyurethane typically reacts more slowly, so the bond takes longer to build early strength. Very dry air can also slow curing because many urethanes rely on moisture in the air. Heat usually speeds cure, but extreme heat can shorten open/working time, giving the technician less time to seat the Chevrolet Malibu (Classic) back glass before the bead skins over. Adhesive choice matters: fast-cure and advanced-cure urethanes are designed to hit MDAT sooner within specific ranges, and specialized systems may be selected for very low temperatures. Vehicle design plays a role too. Larger rear windshields/back glass on SUVs and hatchbacks have longer bead paths and more leverage, so correct bead height, proper primers, and clean pinch-weld prep are critical for a consistent seal. Bang AutoGlass plans materials and process around real on-site conditions for your Chevrolet Malibu (Classic), then provides a clear drive-away recommendation you can follow.
When Is It Safe to Drive After Chevrolet Malibu (Classic) Rear Glass Replacement? Practical Drive-Away Rules
The safest answer to “when can I drive?” after a Chevrolet Malibu (Classic) rear window replacement is: when the urethane has reached MDAT/SDAT for the product and conditions used. MDAT (Minimum Drive-Away Time) and SDAT (Safe Drive-Away Time) describe the minimum stationary window needed for the bond to handle normal driving forces. Because cure speed changes with temperature, humidity, and adhesive formula, timing should come from the urethane manufacturer’s specifications—not a generic estimate. Fast-cure urethanes may allow earlier drive-away in ideal ranges, but cold or very dry weather often extends the time needed to hit the same safety threshold; extreme heat can also alter working time. Practical rule: protect the install during its most vulnerable period. Bang AutoGlass requires at least 1 hour with your Chevrolet Malibu (Classic) parked after the back glass is set before driving—no moving it around and no short trips. After you start driving, keep it gentle the rest of the day: avoid rough roads, don’t slam doors or the liftgate, and postpone high-speed driving while the bond continues to mature. If insurance applies, rear glass replacement is typically a comprehensive claim, and our lifetime workmanship warranty supports the install long after service.
Chevrolet Malibu (Classic) Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
After a Chevrolet Malibu (Classic) rear glass replacement, good aftercare protects the fresh urethane bond while it continues curing. First, follow the drive-away time you’re given; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is applied, leave it in place—its job is to stabilize the back glass and keep moldings aligned while the urethane sets. A common guideline is about 24 hours (sometimes up to 48 hours) before removing tape. For the first 24–48 hours, avoid automated car washes, pressure washing, or directing high-pressure water at the window perimeter, since force and chemicals can disturb an immature seal. Use gentle habits early on: close doors and the liftgate softly to reduce cabin-pressure spikes, and avoid rough construction roads that twist the body and load the new glass. After your first drive or first rain, do a quick leak/wind-noise check around trim and the cargo area, and call promptly if anything seems off. Finally, protect the rear defroster grid—clean inside glass with a soft microfiber cloth and mild cleaner, avoiding razors or abrasive pads.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Chevrolet Malibu (Classic)? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Chevrolet Malibu (Classic) Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
If you’re wondering how long a Chevrolet Malibu (Classic) rear glass replacement takes, separate scheduling from install time. Many shops can handle the hands-on work in about 1–3 hours, but the total timeline can expand if the correct back glass must be sourced, the appointment is booked out, or the vehicle has to sit after installation for adhesive set time. The replacement itself is a step-by-step process: remove the damaged rear windshield/back glass, clear broken glass and old materials, prep the bonding surface, then set and align the new rear window in fresh urethane with final cleanup. Bang AutoGlass shortens downtime with mobile auto glass service at your home or office. For most Chevrolet Malibu (Classic) back glass jobs, our on-site removal, prep, install, and cleanup typically takes about 30–45 minutes once we begin. After the glass is set, we require at least 1 hour of stationary time before it’s safe to drive so the urethane reaches a conservative initial bond. Most customers plan a 90–120 minute window from technician arrival to safe drive-away. If you’re using insurance, rear window replacement is usually covered under comprehensive coverage, and we work with any carrier that offers it. Every replacement includes a lifetime workmanship warranty for long-term confidence.
Chevrolet Malibu (Classic) Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
Rear window replacement on a Chevrolet Malibu (Classic) is a controlled procedure, and install time reflects all the steps around the glass. After staging the work area, we remove the necessary interior and exterior trim and disconnect components that interface with the back glass, including defroster connections and, on some vehicles, an antenna lead. If the rear window is broken, careful cleanup comes first: shards are removed, then small fragments are vacuumed from the rear deck, cargo area, and crevices so you’re not finding glass later. Next we prep the pinch weld by trimming old urethane, cleaning and decontaminating the surface, and addressing any rust that could compromise sealing. Where required by the adhesive system, we apply primer/activator per manufacturer instructions. We then apply a uniform bead of automotive urethane and set the new rear windshield/back glass with correct positioning so it seats evenly around the perimeter. Trim is reinstalled, the defroster is reconnected and verified, and a final inspection checks molding alignment and visible gaps that can lead to leaks or wind noise. Bang AutoGlass keeps these steps efficient on-site; most Chevrolet Malibu (Classic) back glass installs take about 30–45 minutes of hands-on work, then the vehicle must remain parked for the required urethane set time before driving.
Urethane Cure Time for Chevrolet Malibu (Classic) Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
After a Chevrolet Malibu (Classic) rear glass replacement, the limiting factor is rarely installer speed—it’s the urethane’s set and cure profile. Modern back glass is bonded with structural urethane, and that bond needs time to develop enough early strength to tolerate normal driving loads. This is why you may hear MDAT (Minimum Drive-Away Time) or SDAT (Safe Drive-Away Time): both point to the minimum stationary interval after installation for safe early retention. Drive-away time is not the same as full cure; the adhesive continues strengthening well beyond MDAT/SDAT. The correct drive-away recommendation depends on the exact urethane product and the real-world conditions at install. Temperature and humidity matter—cold or dry conditions can slow curing—and fast-cure systems may differ from standard formulas. A professional technician should follow the urethane manufacturer’s product data sheet for the specific adhesive used and communicate the required wait time clearly. For straightforward planning, Bang AutoGlass uses a conservative baseline for Chevrolet Malibu (Classic) back glass service: keep the vehicle stationary for at least 1 hour before driving. This protects the fresh bond during its most vulnerable stage and helps maintain a stable seal as curing continues.
What Affects Chevrolet Malibu (Classic) Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Rear glass replacement cure time on a Chevrolet Malibu (Classic) depends on how fast the urethane adhesive can reach Minimum/Safe Drive-Away Time (MDAT/SDAT). Those times vary by adhesive formula and by conditions during service—especially ambient temperature and relative humidity. In colder weather, moisture-cure polyurethane typically reacts more slowly, so the bond takes longer to build early strength. Very dry air can also slow curing because many urethanes rely on moisture in the air. Heat usually speeds cure, but extreme heat can shorten open/working time, giving the technician less time to seat the Chevrolet Malibu (Classic) back glass before the bead skins over. Adhesive choice matters: fast-cure and advanced-cure urethanes are designed to hit MDAT sooner within specific ranges, and specialized systems may be selected for very low temperatures. Vehicle design plays a role too. Larger rear windshields/back glass on SUVs and hatchbacks have longer bead paths and more leverage, so correct bead height, proper primers, and clean pinch-weld prep are critical for a consistent seal. Bang AutoGlass plans materials and process around real on-site conditions for your Chevrolet Malibu (Classic), then provides a clear drive-away recommendation you can follow.
When Is It Safe to Drive After Chevrolet Malibu (Classic) Rear Glass Replacement? Practical Drive-Away Rules
The safest answer to “when can I drive?” after a Chevrolet Malibu (Classic) rear window replacement is: when the urethane has reached MDAT/SDAT for the product and conditions used. MDAT (Minimum Drive-Away Time) and SDAT (Safe Drive-Away Time) describe the minimum stationary window needed for the bond to handle normal driving forces. Because cure speed changes with temperature, humidity, and adhesive formula, timing should come from the urethane manufacturer’s specifications—not a generic estimate. Fast-cure urethanes may allow earlier drive-away in ideal ranges, but cold or very dry weather often extends the time needed to hit the same safety threshold; extreme heat can also alter working time. Practical rule: protect the install during its most vulnerable period. Bang AutoGlass requires at least 1 hour with your Chevrolet Malibu (Classic) parked after the back glass is set before driving—no moving it around and no short trips. After you start driving, keep it gentle the rest of the day: avoid rough roads, don’t slam doors or the liftgate, and postpone high-speed driving while the bond continues to mature. If insurance applies, rear glass replacement is typically a comprehensive claim, and our lifetime workmanship warranty supports the install long after service.
Chevrolet Malibu (Classic) Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
After a Chevrolet Malibu (Classic) rear glass replacement, good aftercare protects the fresh urethane bond while it continues curing. First, follow the drive-away time you’re given; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is applied, leave it in place—its job is to stabilize the back glass and keep moldings aligned while the urethane sets. A common guideline is about 24 hours (sometimes up to 48 hours) before removing tape. For the first 24–48 hours, avoid automated car washes, pressure washing, or directing high-pressure water at the window perimeter, since force and chemicals can disturb an immature seal. Use gentle habits early on: close doors and the liftgate softly to reduce cabin-pressure spikes, and avoid rough construction roads that twist the body and load the new glass. After your first drive or first rain, do a quick leak/wind-noise check around trim and the cargo area, and call promptly if anything seems off. Finally, protect the rear defroster grid—clean inside glass with a soft microfiber cloth and mild cleaner, avoiding razors or abrasive pads.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Chevrolet Malibu (Classic)? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Chevrolet Malibu (Classic) Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
If you’re wondering how long a Chevrolet Malibu (Classic) rear glass replacement takes, separate scheduling from install time. Many shops can handle the hands-on work in about 1–3 hours, but the total timeline can expand if the correct back glass must be sourced, the appointment is booked out, or the vehicle has to sit after installation for adhesive set time. The replacement itself is a step-by-step process: remove the damaged rear windshield/back glass, clear broken glass and old materials, prep the bonding surface, then set and align the new rear window in fresh urethane with final cleanup. Bang AutoGlass shortens downtime with mobile auto glass service at your home or office. For most Chevrolet Malibu (Classic) back glass jobs, our on-site removal, prep, install, and cleanup typically takes about 30–45 minutes once we begin. After the glass is set, we require at least 1 hour of stationary time before it’s safe to drive so the urethane reaches a conservative initial bond. Most customers plan a 90–120 minute window from technician arrival to safe drive-away. If you’re using insurance, rear window replacement is usually covered under comprehensive coverage, and we work with any carrier that offers it. Every replacement includes a lifetime workmanship warranty for long-term confidence.
Chevrolet Malibu (Classic) Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
Rear window replacement on a Chevrolet Malibu (Classic) is a controlled procedure, and install time reflects all the steps around the glass. After staging the work area, we remove the necessary interior and exterior trim and disconnect components that interface with the back glass, including defroster connections and, on some vehicles, an antenna lead. If the rear window is broken, careful cleanup comes first: shards are removed, then small fragments are vacuumed from the rear deck, cargo area, and crevices so you’re not finding glass later. Next we prep the pinch weld by trimming old urethane, cleaning and decontaminating the surface, and addressing any rust that could compromise sealing. Where required by the adhesive system, we apply primer/activator per manufacturer instructions. We then apply a uniform bead of automotive urethane and set the new rear windshield/back glass with correct positioning so it seats evenly around the perimeter. Trim is reinstalled, the defroster is reconnected and verified, and a final inspection checks molding alignment and visible gaps that can lead to leaks or wind noise. Bang AutoGlass keeps these steps efficient on-site; most Chevrolet Malibu (Classic) back glass installs take about 30–45 minutes of hands-on work, then the vehicle must remain parked for the required urethane set time before driving.
Urethane Cure Time for Chevrolet Malibu (Classic) Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
After a Chevrolet Malibu (Classic) rear glass replacement, the limiting factor is rarely installer speed—it’s the urethane’s set and cure profile. Modern back glass is bonded with structural urethane, and that bond needs time to develop enough early strength to tolerate normal driving loads. This is why you may hear MDAT (Minimum Drive-Away Time) or SDAT (Safe Drive-Away Time): both point to the minimum stationary interval after installation for safe early retention. Drive-away time is not the same as full cure; the adhesive continues strengthening well beyond MDAT/SDAT. The correct drive-away recommendation depends on the exact urethane product and the real-world conditions at install. Temperature and humidity matter—cold or dry conditions can slow curing—and fast-cure systems may differ from standard formulas. A professional technician should follow the urethane manufacturer’s product data sheet for the specific adhesive used and communicate the required wait time clearly. For straightforward planning, Bang AutoGlass uses a conservative baseline for Chevrolet Malibu (Classic) back glass service: keep the vehicle stationary for at least 1 hour before driving. This protects the fresh bond during its most vulnerable stage and helps maintain a stable seal as curing continues.
What Affects Chevrolet Malibu (Classic) Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Rear glass replacement cure time on a Chevrolet Malibu (Classic) depends on how fast the urethane adhesive can reach Minimum/Safe Drive-Away Time (MDAT/SDAT). Those times vary by adhesive formula and by conditions during service—especially ambient temperature and relative humidity. In colder weather, moisture-cure polyurethane typically reacts more slowly, so the bond takes longer to build early strength. Very dry air can also slow curing because many urethanes rely on moisture in the air. Heat usually speeds cure, but extreme heat can shorten open/working time, giving the technician less time to seat the Chevrolet Malibu (Classic) back glass before the bead skins over. Adhesive choice matters: fast-cure and advanced-cure urethanes are designed to hit MDAT sooner within specific ranges, and specialized systems may be selected for very low temperatures. Vehicle design plays a role too. Larger rear windshields/back glass on SUVs and hatchbacks have longer bead paths and more leverage, so correct bead height, proper primers, and clean pinch-weld prep are critical for a consistent seal. Bang AutoGlass plans materials and process around real on-site conditions for your Chevrolet Malibu (Classic), then provides a clear drive-away recommendation you can follow.
When Is It Safe to Drive After Chevrolet Malibu (Classic) Rear Glass Replacement? Practical Drive-Away Rules
The safest answer to “when can I drive?” after a Chevrolet Malibu (Classic) rear window replacement is: when the urethane has reached MDAT/SDAT for the product and conditions used. MDAT (Minimum Drive-Away Time) and SDAT (Safe Drive-Away Time) describe the minimum stationary window needed for the bond to handle normal driving forces. Because cure speed changes with temperature, humidity, and adhesive formula, timing should come from the urethane manufacturer’s specifications—not a generic estimate. Fast-cure urethanes may allow earlier drive-away in ideal ranges, but cold or very dry weather often extends the time needed to hit the same safety threshold; extreme heat can also alter working time. Practical rule: protect the install during its most vulnerable period. Bang AutoGlass requires at least 1 hour with your Chevrolet Malibu (Classic) parked after the back glass is set before driving—no moving it around and no short trips. After you start driving, keep it gentle the rest of the day: avoid rough roads, don’t slam doors or the liftgate, and postpone high-speed driving while the bond continues to mature. If insurance applies, rear glass replacement is typically a comprehensive claim, and our lifetime workmanship warranty supports the install long after service.
Chevrolet Malibu (Classic) Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
After a Chevrolet Malibu (Classic) rear glass replacement, good aftercare protects the fresh urethane bond while it continues curing. First, follow the drive-away time you’re given; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is applied, leave it in place—its job is to stabilize the back glass and keep moldings aligned while the urethane sets. A common guideline is about 24 hours (sometimes up to 48 hours) before removing tape. For the first 24–48 hours, avoid automated car washes, pressure washing, or directing high-pressure water at the window perimeter, since force and chemicals can disturb an immature seal. Use gentle habits early on: close doors and the liftgate softly to reduce cabin-pressure spikes, and avoid rough construction roads that twist the body and load the new glass. After your first drive or first rain, do a quick leak/wind-noise check around trim and the cargo area, and call promptly if anything seems off. Finally, protect the rear defroster grid—clean inside glass with a soft microfiber cloth and mild cleaner, avoiding razors or abrasive pads.
Enjoy More Relevant Blogs
How Much Does Rear Glass Replacement Cost for Chevrolet Malibu (Classic)? Pricing Factors, OEM vs Aftermarket, and Insurance Deductibles
Estimate Chevrolet Malibu (Classic) rear glass replacement cost. Compare OEM vs aftermarket, labor factors, insurance deductibles, and ways to save. Request a quote.
Shattered Back Window on Chevrolet Malibu (Classic): A Step-by-Step Rear Glass Replacement Plan
Shattered back window on Chevrolet Malibu (Classic)? Follow a step-by-step rear glass replacement plan, cleanup tips, defroster notes, cure time, and drive-away rules.
Rear Defroster Not Working on Chevrolet Malibu (Classic)? When Rear Glass Replacement Makes More Sense Than Repair
Rear defroster not working on your Chevrolet Malibu (Classic)? Learn common causes, when repair fails, and when rear glass replacement is the smarter fix for winter.
Back Glass Replacement on Chevrolet Malibu (Classic): Defroster Tabs, Antenna Lines, and Connector Reattachment Basics
Back glass replacement on Chevrolet Malibu (Classic): defroster tabs, antenna lines, and connectors explained, plus install tips to avoid damage and rework safely.
Post-Install Checks for Chevrolet Malibu (Classic): Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Chevrolet Malibu (Classic): test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Tempered Safety Rear Glass Replacement for Chevrolet Malibu (Classic): Understanding DOT Markings and FMVSS 205
Need Chevrolet Malibu (Classic) rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
How to Schedule Mobile Rear Glass Replacement for Chevrolet Malibu (Classic)
Schedule mobile rear glass replacement for your Chevrolet Malibu (Classic) in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
OEM-Quality Rear Glass Replacement for Chevrolet Malibu (Classic): Defroster Grid and Tint-Match Checklist
OEM-quality rear glass replacement for Chevrolet Malibu (Classic): defroster grid and tint-match checklist, plus install tips to avoid callbacks—schedule service.
Rear Glass Replacement for Chevrolet Malibu (Classic): What to Expect During Install and Aftercare
Rear glass replacement for Chevrolet Malibu (Classic): what happens during install, defroster and tint considerations, cure time, and aftercare to prevent leaks long-term.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm