Services
Service Areas
Rear Glass Replacement for Chevrolet Silverado (Classic) 1500 Extended Cab: What to Expect During Install and Aftercare
Before the Install: Verify Chevrolet Silverado (Classic) 1500 Extended Cab Rear Glass, Tint Match, and DOT Markings
Before we install new rear glass on your Chevrolet Silverado (Classic) 1500 Extended Cab, Bang AutoGlass follows a verification checklist focused on fit, safety, and appearance. Rear windshields are not universal: your Chevrolet Silverado (Classic) 1500 Extended Cab back glass can vary by model year, body style, and trim, plus options like factory privacy glass, a third brake light opening, in-glass antenna elements, or specific moldings and clips. We confirm the correct rear window replacement using your VIN and then visually match the vehicle so the glass we bring is right the first time. Next we check tint and shade. Many Chevrolet Silverado (Classic) 1500 Extended Cab vehicles use darker, dyed privacy glass in the rear, so our goal is an OEM-style tone match that blends with the side glass. We also verify the etched compliance markings (DOT code and AS classification) to confirm the glazing is certified for automotive rear/side use. Because we are a mobile auto glass company, we deliver the correct Chevrolet Silverado (Classic) 1500 Extended Cab rear glass replacement to your home, workplace, or fleet lot, often next day. If you are using comprehensive coverage, we can work with any insurance company and explain what keeps the claim and install moving smoothly.
What Happens During Removal: Interior Protection, Broken Glass Cleanup, and Pinchweld Prep
During a Chevrolet Silverado (Classic) 1500 Extended Cab rear glass replacement, the removal stage is where technique prevents leaks, wind noise, and interior damage. We protect the cabin first by covering seats, the rear deck, and nearby trim, then we remove only the panels and moldings required for access so finishes and clips are not damaged. If the rear windshield shattered, tempered glass can leave hundreds of small cubes in seams and the hatch/trunk channel. We complete broken glass cleanup with controlled vacuuming and detailed hand pickup in crevices so your Chevrolet Silverado (Classic) 1500 Extended Cab is safe before bonding. Next we cut out the existing urethane with purpose-built tools and remove the damaged back glass. We then prep the pinchweld-the metal flange the new rear window bonds to-by trimming old urethane to a thin, even layer (commonly about 1-2 mm) where it is sound, because fresh urethane bonds best to properly prepared existing urethane. If we find contamination, gaps, or heavy buildup from prior work, we correct it so the new glass sits flush with a consistent bond line. Finally, we inspect for paint damage and corrosion; any bare metal or rust is treated and primed to support OEM-style strength and long-term water-tight sealing.
Urethane Bonding Process for Chevrolet Silverado (Classic) 1500 Extended Cab Rear Glass: Bead Application and Set-In
With the pinchweld prepared, urethane bonding is the key to a durable Chevrolet Silverado (Classic) 1500 Extended Cab rear windshield replacement. Automotive urethane is a structural adhesive, so cleanliness and timing matter. We dry-fit the new rear glass to confirm alignment and molding fit, then clean and prep the bonding areas so dust, oils, and moisture do not reduce adhesion. When the adhesive system requires primer, we apply it only where needed-such as repaired bare metal or the glass bond area-and allow proper flash time. To replicate the factory seal, we dispense urethane in one continuous, uniform perimeter bead (often a V-profile) with no gaps, thin spots, or stop-start seams. Proper bead height helps prevent water intrusion and reduces wind noise after your Chevrolet Silverado (Classic) 1500 Extended Cab back glass replacement. We set the glass using proper handling points, align it to references, press evenly to seat it, and secure it as needed while curing begins. Most installs take about 30-45 minutes on site, and we require at least 1 hour of safe drive-away time. Bang AutoGlass backs the work with a lifetime workmanship warranty and can coordinate with any insurance company under comprehensive coverage.
Defroster Grid and Antenna Reconnection: Tabs, Harnesses, and Function Checks
After the new Chevrolet Silverado (Classic) 1500 Extended Cab rear glass is set, we restore the electronics that make the back window more than just glass. Most rear windshields include a rear defroster grid (the thin horizontal lines), and many trims also use in-glass antenna elements for AM/FM, satellite radio, cellular, GPS, or keyless systems. During rear window replacement, those connectors are safely disconnected so trim can be removed without stressing the harness. After installation, Bang AutoGlass reconnects the defroster harness and any antenna or accessory plugs, then secures the wiring so it will not rattle behind the panels. We inspect the defroster tabs and grid for common problems like loose connections, corrosion, or scratched lines. If a tab was damaged by impact or prior work, we explain the most reliable fix for your Chevrolet Silverado (Classic) 1500 Extended Cab; quality repairs often use conductive adhesive made for defroster circuits and require careful prep and cure time. Before handoff, we run function checks: the defroster switch and indicator should operate normally, and the glass should clear evenly over several minutes. If the rear glass includes antenna pathways, we verify basic reception so you leave confident after your rear windshield replacement.
Safe Drive-Away Time and Cure Window: What Impacts Timing and First-24-Hour Rules
Safe drive-away time (SDAT) is the minimum period the urethane adhesive needs to reach enough strength for normal driving. It matters on a Chevrolet Silverado (Classic) 1500 Extended Cab rear windshield replacement because urethane is both the weatherproof seal and the structural bond that holds the back glass under vibration, wind load, and braking. SDAT can change with adhesive chemistry and site conditions such as temperature and humidity (many urethanes are moisture-curing). Cool or very dry air can slow curing, while warm conditions with normal humidity help it progress. With Bang AutoGlass, most rear glass replacements take about 30-45 minutes on site, and we require at least 1 hour of SDAT before you drive your Chevrolet Silverado (Classic) 1500 Extended Cab. In tougher weather, we may recommend extra caution. During the first 24 hours, protect the fresh bond: avoid high-pressure car washes or power washing around the edges (often 24-48 hours is advised), and keep hand washing gentle near the perimeter. Try not to slam doors, avoid rough roads when possible, and leave any tape or supports in place until instructed. These steps help prevent leaks, wind noise, and callbacks after your Chevrolet Silverado (Classic) 1500 Extended Cab rear window replacement.
Aftercare and Final QC: Leak/Wind Noise Checks, Defroster Use, and Documentation
After the glass is installed and the electronics are reconnected, we complete a quality-control routine so your Chevrolet Silverado (Classic) 1500 Extended Cab rear window replacement looks factory-clean and stays sealed. Bang AutoGlass starts with fit-and-finish: the rear glass should be centered, moldings should sit flush, and trim panels should be reinstalled correctly so there are no gaps that can create wind noise. We then clean the vehicle, vacuuming the rear deck and cargo area to remove any remaining tempered glass and wiping down surfaces. Next, we verify sealing performance. We confirm a continuous urethane bond line around the perimeter and, when conditions allow, perform a controlled water check to screen for leaks. We also look for post-install issues such as whistling at highway speed, rattles from loose clips or wiring, or a molding edge that is not fully seated, and we correct them before we leave. For vehicles with a rear defroster grid or in-glass antenna, we confirm connectors are secured and complete basic function checks. You receive an itemized invoice and documentation for warranty or insurance, and our work is backed by a lifetime workmanship warranty.
Services
Service Areas
Rear Glass Replacement for Chevrolet Silverado (Classic) 1500 Extended Cab: What to Expect During Install and Aftercare
Before the Install: Verify Chevrolet Silverado (Classic) 1500 Extended Cab Rear Glass, Tint Match, and DOT Markings
Before we install new rear glass on your Chevrolet Silverado (Classic) 1500 Extended Cab, Bang AutoGlass follows a verification checklist focused on fit, safety, and appearance. Rear windshields are not universal: your Chevrolet Silverado (Classic) 1500 Extended Cab back glass can vary by model year, body style, and trim, plus options like factory privacy glass, a third brake light opening, in-glass antenna elements, or specific moldings and clips. We confirm the correct rear window replacement using your VIN and then visually match the vehicle so the glass we bring is right the first time. Next we check tint and shade. Many Chevrolet Silverado (Classic) 1500 Extended Cab vehicles use darker, dyed privacy glass in the rear, so our goal is an OEM-style tone match that blends with the side glass. We also verify the etched compliance markings (DOT code and AS classification) to confirm the glazing is certified for automotive rear/side use. Because we are a mobile auto glass company, we deliver the correct Chevrolet Silverado (Classic) 1500 Extended Cab rear glass replacement to your home, workplace, or fleet lot, often next day. If you are using comprehensive coverage, we can work with any insurance company and explain what keeps the claim and install moving smoothly.
What Happens During Removal: Interior Protection, Broken Glass Cleanup, and Pinchweld Prep
During a Chevrolet Silverado (Classic) 1500 Extended Cab rear glass replacement, the removal stage is where technique prevents leaks, wind noise, and interior damage. We protect the cabin first by covering seats, the rear deck, and nearby trim, then we remove only the panels and moldings required for access so finishes and clips are not damaged. If the rear windshield shattered, tempered glass can leave hundreds of small cubes in seams and the hatch/trunk channel. We complete broken glass cleanup with controlled vacuuming and detailed hand pickup in crevices so your Chevrolet Silverado (Classic) 1500 Extended Cab is safe before bonding. Next we cut out the existing urethane with purpose-built tools and remove the damaged back glass. We then prep the pinchweld-the metal flange the new rear window bonds to-by trimming old urethane to a thin, even layer (commonly about 1-2 mm) where it is sound, because fresh urethane bonds best to properly prepared existing urethane. If we find contamination, gaps, or heavy buildup from prior work, we correct it so the new glass sits flush with a consistent bond line. Finally, we inspect for paint damage and corrosion; any bare metal or rust is treated and primed to support OEM-style strength and long-term water-tight sealing.
Urethane Bonding Process for Chevrolet Silverado (Classic) 1500 Extended Cab Rear Glass: Bead Application and Set-In
With the pinchweld prepared, urethane bonding is the key to a durable Chevrolet Silverado (Classic) 1500 Extended Cab rear windshield replacement. Automotive urethane is a structural adhesive, so cleanliness and timing matter. We dry-fit the new rear glass to confirm alignment and molding fit, then clean and prep the bonding areas so dust, oils, and moisture do not reduce adhesion. When the adhesive system requires primer, we apply it only where needed-such as repaired bare metal or the glass bond area-and allow proper flash time. To replicate the factory seal, we dispense urethane in one continuous, uniform perimeter bead (often a V-profile) with no gaps, thin spots, or stop-start seams. Proper bead height helps prevent water intrusion and reduces wind noise after your Chevrolet Silverado (Classic) 1500 Extended Cab back glass replacement. We set the glass using proper handling points, align it to references, press evenly to seat it, and secure it as needed while curing begins. Most installs take about 30-45 minutes on site, and we require at least 1 hour of safe drive-away time. Bang AutoGlass backs the work with a lifetime workmanship warranty and can coordinate with any insurance company under comprehensive coverage.
Defroster Grid and Antenna Reconnection: Tabs, Harnesses, and Function Checks
After the new Chevrolet Silverado (Classic) 1500 Extended Cab rear glass is set, we restore the electronics that make the back window more than just glass. Most rear windshields include a rear defroster grid (the thin horizontal lines), and many trims also use in-glass antenna elements for AM/FM, satellite radio, cellular, GPS, or keyless systems. During rear window replacement, those connectors are safely disconnected so trim can be removed without stressing the harness. After installation, Bang AutoGlass reconnects the defroster harness and any antenna or accessory plugs, then secures the wiring so it will not rattle behind the panels. We inspect the defroster tabs and grid for common problems like loose connections, corrosion, or scratched lines. If a tab was damaged by impact or prior work, we explain the most reliable fix for your Chevrolet Silverado (Classic) 1500 Extended Cab; quality repairs often use conductive adhesive made for defroster circuits and require careful prep and cure time. Before handoff, we run function checks: the defroster switch and indicator should operate normally, and the glass should clear evenly over several minutes. If the rear glass includes antenna pathways, we verify basic reception so you leave confident after your rear windshield replacement.
Safe Drive-Away Time and Cure Window: What Impacts Timing and First-24-Hour Rules
Safe drive-away time (SDAT) is the minimum period the urethane adhesive needs to reach enough strength for normal driving. It matters on a Chevrolet Silverado (Classic) 1500 Extended Cab rear windshield replacement because urethane is both the weatherproof seal and the structural bond that holds the back glass under vibration, wind load, and braking. SDAT can change with adhesive chemistry and site conditions such as temperature and humidity (many urethanes are moisture-curing). Cool or very dry air can slow curing, while warm conditions with normal humidity help it progress. With Bang AutoGlass, most rear glass replacements take about 30-45 minutes on site, and we require at least 1 hour of SDAT before you drive your Chevrolet Silverado (Classic) 1500 Extended Cab. In tougher weather, we may recommend extra caution. During the first 24 hours, protect the fresh bond: avoid high-pressure car washes or power washing around the edges (often 24-48 hours is advised), and keep hand washing gentle near the perimeter. Try not to slam doors, avoid rough roads when possible, and leave any tape or supports in place until instructed. These steps help prevent leaks, wind noise, and callbacks after your Chevrolet Silverado (Classic) 1500 Extended Cab rear window replacement.
Aftercare and Final QC: Leak/Wind Noise Checks, Defroster Use, and Documentation
After the glass is installed and the electronics are reconnected, we complete a quality-control routine so your Chevrolet Silverado (Classic) 1500 Extended Cab rear window replacement looks factory-clean and stays sealed. Bang AutoGlass starts with fit-and-finish: the rear glass should be centered, moldings should sit flush, and trim panels should be reinstalled correctly so there are no gaps that can create wind noise. We then clean the vehicle, vacuuming the rear deck and cargo area to remove any remaining tempered glass and wiping down surfaces. Next, we verify sealing performance. We confirm a continuous urethane bond line around the perimeter and, when conditions allow, perform a controlled water check to screen for leaks. We also look for post-install issues such as whistling at highway speed, rattles from loose clips or wiring, or a molding edge that is not fully seated, and we correct them before we leave. For vehicles with a rear defroster grid or in-glass antenna, we confirm connectors are secured and complete basic function checks. You receive an itemized invoice and documentation for warranty or insurance, and our work is backed by a lifetime workmanship warranty.
Services
Service Areas
Rear Glass Replacement for Chevrolet Silverado (Classic) 1500 Extended Cab: What to Expect During Install and Aftercare
Before the Install: Verify Chevrolet Silverado (Classic) 1500 Extended Cab Rear Glass, Tint Match, and DOT Markings
Before we install new rear glass on your Chevrolet Silverado (Classic) 1500 Extended Cab, Bang AutoGlass follows a verification checklist focused on fit, safety, and appearance. Rear windshields are not universal: your Chevrolet Silverado (Classic) 1500 Extended Cab back glass can vary by model year, body style, and trim, plus options like factory privacy glass, a third brake light opening, in-glass antenna elements, or specific moldings and clips. We confirm the correct rear window replacement using your VIN and then visually match the vehicle so the glass we bring is right the first time. Next we check tint and shade. Many Chevrolet Silverado (Classic) 1500 Extended Cab vehicles use darker, dyed privacy glass in the rear, so our goal is an OEM-style tone match that blends with the side glass. We also verify the etched compliance markings (DOT code and AS classification) to confirm the glazing is certified for automotive rear/side use. Because we are a mobile auto glass company, we deliver the correct Chevrolet Silverado (Classic) 1500 Extended Cab rear glass replacement to your home, workplace, or fleet lot, often next day. If you are using comprehensive coverage, we can work with any insurance company and explain what keeps the claim and install moving smoothly.
What Happens During Removal: Interior Protection, Broken Glass Cleanup, and Pinchweld Prep
During a Chevrolet Silverado (Classic) 1500 Extended Cab rear glass replacement, the removal stage is where technique prevents leaks, wind noise, and interior damage. We protect the cabin first by covering seats, the rear deck, and nearby trim, then we remove only the panels and moldings required for access so finishes and clips are not damaged. If the rear windshield shattered, tempered glass can leave hundreds of small cubes in seams and the hatch/trunk channel. We complete broken glass cleanup with controlled vacuuming and detailed hand pickup in crevices so your Chevrolet Silverado (Classic) 1500 Extended Cab is safe before bonding. Next we cut out the existing urethane with purpose-built tools and remove the damaged back glass. We then prep the pinchweld-the metal flange the new rear window bonds to-by trimming old urethane to a thin, even layer (commonly about 1-2 mm) where it is sound, because fresh urethane bonds best to properly prepared existing urethane. If we find contamination, gaps, or heavy buildup from prior work, we correct it so the new glass sits flush with a consistent bond line. Finally, we inspect for paint damage and corrosion; any bare metal or rust is treated and primed to support OEM-style strength and long-term water-tight sealing.
Urethane Bonding Process for Chevrolet Silverado (Classic) 1500 Extended Cab Rear Glass: Bead Application and Set-In
With the pinchweld prepared, urethane bonding is the key to a durable Chevrolet Silverado (Classic) 1500 Extended Cab rear windshield replacement. Automotive urethane is a structural adhesive, so cleanliness and timing matter. We dry-fit the new rear glass to confirm alignment and molding fit, then clean and prep the bonding areas so dust, oils, and moisture do not reduce adhesion. When the adhesive system requires primer, we apply it only where needed-such as repaired bare metal or the glass bond area-and allow proper flash time. To replicate the factory seal, we dispense urethane in one continuous, uniform perimeter bead (often a V-profile) with no gaps, thin spots, or stop-start seams. Proper bead height helps prevent water intrusion and reduces wind noise after your Chevrolet Silverado (Classic) 1500 Extended Cab back glass replacement. We set the glass using proper handling points, align it to references, press evenly to seat it, and secure it as needed while curing begins. Most installs take about 30-45 minutes on site, and we require at least 1 hour of safe drive-away time. Bang AutoGlass backs the work with a lifetime workmanship warranty and can coordinate with any insurance company under comprehensive coverage.
Defroster Grid and Antenna Reconnection: Tabs, Harnesses, and Function Checks
After the new Chevrolet Silverado (Classic) 1500 Extended Cab rear glass is set, we restore the electronics that make the back window more than just glass. Most rear windshields include a rear defroster grid (the thin horizontal lines), and many trims also use in-glass antenna elements for AM/FM, satellite radio, cellular, GPS, or keyless systems. During rear window replacement, those connectors are safely disconnected so trim can be removed without stressing the harness. After installation, Bang AutoGlass reconnects the defroster harness and any antenna or accessory plugs, then secures the wiring so it will not rattle behind the panels. We inspect the defroster tabs and grid for common problems like loose connections, corrosion, or scratched lines. If a tab was damaged by impact or prior work, we explain the most reliable fix for your Chevrolet Silverado (Classic) 1500 Extended Cab; quality repairs often use conductive adhesive made for defroster circuits and require careful prep and cure time. Before handoff, we run function checks: the defroster switch and indicator should operate normally, and the glass should clear evenly over several minutes. If the rear glass includes antenna pathways, we verify basic reception so you leave confident after your rear windshield replacement.
Safe Drive-Away Time and Cure Window: What Impacts Timing and First-24-Hour Rules
Safe drive-away time (SDAT) is the minimum period the urethane adhesive needs to reach enough strength for normal driving. It matters on a Chevrolet Silverado (Classic) 1500 Extended Cab rear windshield replacement because urethane is both the weatherproof seal and the structural bond that holds the back glass under vibration, wind load, and braking. SDAT can change with adhesive chemistry and site conditions such as temperature and humidity (many urethanes are moisture-curing). Cool or very dry air can slow curing, while warm conditions with normal humidity help it progress. With Bang AutoGlass, most rear glass replacements take about 30-45 minutes on site, and we require at least 1 hour of SDAT before you drive your Chevrolet Silverado (Classic) 1500 Extended Cab. In tougher weather, we may recommend extra caution. During the first 24 hours, protect the fresh bond: avoid high-pressure car washes or power washing around the edges (often 24-48 hours is advised), and keep hand washing gentle near the perimeter. Try not to slam doors, avoid rough roads when possible, and leave any tape or supports in place until instructed. These steps help prevent leaks, wind noise, and callbacks after your Chevrolet Silverado (Classic) 1500 Extended Cab rear window replacement.
Aftercare and Final QC: Leak/Wind Noise Checks, Defroster Use, and Documentation
After the glass is installed and the electronics are reconnected, we complete a quality-control routine so your Chevrolet Silverado (Classic) 1500 Extended Cab rear window replacement looks factory-clean and stays sealed. Bang AutoGlass starts with fit-and-finish: the rear glass should be centered, moldings should sit flush, and trim panels should be reinstalled correctly so there are no gaps that can create wind noise. We then clean the vehicle, vacuuming the rear deck and cargo area to remove any remaining tempered glass and wiping down surfaces. Next, we verify sealing performance. We confirm a continuous urethane bond line around the perimeter and, when conditions allow, perform a controlled water check to screen for leaks. We also look for post-install issues such as whistling at highway speed, rattles from loose clips or wiring, or a molding edge that is not fully seated, and we correct them before we leave. For vehicles with a rear defroster grid or in-glass antenna, we confirm connectors are secured and complete basic function checks. You receive an itemized invoice and documentation for warranty or insurance, and our work is backed by a lifetime workmanship warranty.
Enjoy More Relevant Blogs
Post-Install Checks for Chevrolet Silverado (Classic) 1500 Extended Cab: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Chevrolet Silverado (Classic) 1500 Extended Cab: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
How to Schedule Mobile Rear Glass Replacement for Chevrolet Silverado (Classic) 1500 Extended Cab
Schedule mobile rear glass replacement for your Chevrolet Silverado (Classic) 1500 Extended Cab in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
How Long Does Rear Glass Replacement Take on Chevrolet Silverado (Classic) 1500 Extended Cab? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How long is Chevrolet Silverado (Classic) 1500 Extended Cab rear glass replacement? Get install time, urethane cure guidelines, and drive-away timing after service. Plan your visit today.
Tempered Safety Rear Glass Replacement for Chevrolet Silverado (Classic) 1500 Extended Cab: Understanding DOT Markings and FMVSS 205
Need Chevrolet Silverado (Classic) 1500 Extended Cab rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Back Glass Replacement on Chevrolet Silverado (Classic) 1500 Extended Cab: Defroster Tabs, Antenna Lines, and Connector Reattachment Basics
Back glass replacement on Chevrolet Silverado (Classic) 1500 Extended Cab: defroster tabs, antenna lines, and connectors explained, plus install tips to avoid damage and rework safely.
Shattered Back Window on Chevrolet Silverado (Classic) 1500 Extended Cab: A Step-by-Step Rear Glass Replacement Plan
Shattered back window on Chevrolet Silverado (Classic) 1500 Extended Cab? Follow a step-by-step rear glass replacement plan, cleanup tips, defroster notes, cure time, and drive-away rules.
Rear Defroster Not Working on Chevrolet Silverado (Classic) 1500 Extended Cab? When Rear Glass Replacement Makes More Sense Than Repair
Rear defroster not working on your Chevrolet Silverado (Classic) 1500 Extended Cab? Learn common causes, when repair fails, and when rear glass replacement is the smarter fix for winter.
How Much Does Rear Glass Replacement Cost for Chevrolet Silverado (Classic) 1500 Extended Cab? Pricing Factors, OEM vs Aftermarket, and Insurance Deductibles
Estimate Chevrolet Silverado (Classic) 1500 Extended Cab rear glass replacement cost. Compare OEM vs aftermarket, labor factors, insurance deductibles, and ways to save. Request a quote.
OEM-Quality Rear Glass Replacement for Chevrolet Silverado (Classic) 1500 Extended Cab: Defroster Grid and Tint-Match Checklist
OEM-quality rear glass replacement for Chevrolet Silverado (Classic) 1500 Extended Cab: defroster grid and tint-match checklist, plus install tips to avoid callbacks—schedule service.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm