Services
Service Areas
How Long Does Rear Glass Replacement Take on Bmw 2 Series Gran Tourer? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Bmw 2 Series Gran Tourer Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
How long a Bmw 2 Series Gran Tourer rear window replacement takes depends on what you count as “time.” The in-shop installation may only require 1–3 hours of labor, but the full experience often includes booking delays, glass sourcing, drop-off and pickup, and the adhesive set period after the new back glass is installed. Technicians must remove the damaged rear windshield, clean out fragments, prep the pinch weld, and set the new rear glass in fresh urethane with careful alignment—so even a “quick” replacement can consume most of a day. Bang AutoGlass is designed to reduce that friction with mobile service at your home, office, or driveway. On most Bmw 2 Series Gran Tourer back glass replacements, the hands-on phase (removal, prep, install, and cleanup) typically runs about 30–45 minutes. We then require at least 1 hour of stationary time before driving so the urethane reaches a safe initial bond. For planning purposes, many customers reserve a 90–120 minute window from arrival to safe drive-away. If you’re filing a claim, rear glass replacement is usually handled through comprehensive coverage, and we work with all carriers that provide it. We also include a lifetime workmanship warranty to back the seal and fit over time.
Bmw 2 Series Gran Tourer Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
A Bmw 2 Series Gran Tourer rear glass replacement is fast only when the technician follows a disciplined process. We begin by protecting the interior and gaining access: trim, moldings, and any fasteners are removed, and defroster or antenna connections to the back glass are identified and disconnected. If the window broke, we remove loose shards and vacuum the rear deck/cargo area and vents to limit leftover glass chips. The critical step is pinch-weld preparation. Old urethane is trimmed to the correct height, the surface is cleaned and decontaminated, and any corrosion is treated so the new bead bonds evenly. When the adhesive system calls for it, primer/activator is applied to improve adhesion and reduce rust risk. Fresh automotive urethane is applied in a continuous bead, then the new rear windshield/back glass is set and aligned so the perimeter seats uniformly. Final work includes reinstalling moldings, reconnecting the defroster, using retention tape if required, and inspecting for obvious gaps that can cause leaks or wind noise. At Bang AutoGlass, most Bmw 2 Series Gran Tourer back glass installs take about 30–45 minutes of hands-on work, followed by the required stationary set time before you drive.
Urethane Cure Time for Bmw 2 Series Gran Tourer Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
After a Bmw 2 Series Gran Tourer rear glass replacement, the limiting factor is rarely installer speed—it’s the urethane’s set and cure profile. Modern back glass is bonded with structural urethane, and that bond needs time to develop enough early strength to tolerate normal driving loads. This is why you may hear MDAT (Minimum Drive-Away Time) or SDAT (Safe Drive-Away Time): both point to the minimum stationary interval after installation for safe early retention. Drive-away time is not the same as full cure; the adhesive continues strengthening well beyond MDAT/SDAT. The correct drive-away recommendation depends on the exact urethane product and the real-world conditions at install. Temperature and humidity matter—cold or dry conditions can slow curing—and fast-cure systems may differ from standard formulas. A professional technician should follow the urethane manufacturer’s product data sheet for the specific adhesive used and communicate the required wait time clearly. For straightforward planning, Bang AutoGlass uses a conservative baseline for Bmw 2 Series Gran Tourer back glass service: keep the vehicle stationary for at least 1 hour before driving. This protects the fresh bond during its most vulnerable stage and helps maintain a stable seal as curing continues.
What Affects Bmw 2 Series Gran Tourer Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Rear glass replacement cure time on a Bmw 2 Series Gran Tourer depends on how fast the urethane adhesive can reach Minimum/Safe Drive-Away Time (MDAT/SDAT). Those times vary by adhesive formula and by conditions during service—especially ambient temperature and relative humidity. In colder weather, moisture-cure polyurethane typically reacts more slowly, so the bond takes longer to build early strength. Very dry air can also slow curing because many urethanes rely on moisture in the air. Heat usually speeds cure, but extreme heat can shorten open/working time, giving the technician less time to seat the Bmw 2 Series Gran Tourer back glass before the bead skins over. Adhesive choice matters: fast-cure and advanced-cure urethanes are designed to hit MDAT sooner within specific ranges, and specialized systems may be selected for very low temperatures. Vehicle design plays a role too. Larger rear windshields/back glass on SUVs and hatchbacks have longer bead paths and more leverage, so correct bead height, proper primers, and clean pinch-weld prep are critical for a consistent seal. Bang AutoGlass plans materials and process around real on-site conditions for your Bmw 2 Series Gran Tourer, then provides a clear drive-away recommendation you can follow.
When Is It Safe to Drive After Bmw 2 Series Gran Tourer Rear Glass Replacement? Practical Drive-Away Rules
When can you drive after a Bmw 2 Series Gran Tourer rear glass replacement? The correct benchmark is MDAT/SDAT—the minimum stationary time the urethane needs to develop enough initial strength for normal driving forces. Because MDAT depends on the exact adhesive and the temperature/humidity at install, a reliable shop follows the urethane manufacturer’s data sheet rather than a generic promise. Some fast-cure systems can reach drive-away strength sooner in ideal conditions, while cold or low-humidity days often extend the wait; extreme heat can also change working time and cure behavior. For planning, protect the most vulnerable window: Bang AutoGlass requires at least 1 hour with your Bmw 2 Series Gran Tourer parked after the back glass is set before it is safe to drive. During that hour, keep it stationary—no repositioning, no quick errands. After you’re cleared, drive gently the rest of the day: close doors softly, avoid rough roads when possible, and postpone high-speed or aggressive driving while the bond continues to strengthen. If you’re using insurance, rear window replacement is typically handled under comprehensive coverage, and every install is backed by our lifetime workmanship warranty.
Bmw 2 Series Gran Tourer Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
The best aftercare for a Bmw 2 Series Gran Tourer rear window replacement is to minimize stress on the glass while the urethane finishes curing. Begin by following the drive-away time provided; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is present, leave it in place—tape helps stabilize the rear windshield/back glass and keep moldings seated as the adhesive sets. Many jobs do well with roughly 24 hours of tape, and up to 48 hours in some situations. For the first 1–2 days, skip automated car washes, power washers, and anything that directs pressurized water at the window edge. Also avoid abrupt cabin-pressure changes: close doors softly, don’t slam the liftgate, and avoid blasting HVAC at the glass perimeter. If you can, steer clear of uneven construction roads on day one, since body twist and vibration can load the new glass before the bond is fully mature. After your first drive or first rain, do a quick inspection for dampness, wind noise, or moisture around trim and the cargo area, and report concerns promptly. Protect the rear defroster grid by cleaning with a soft cloth and mild, non-abrasive cleaner—no scraping or harsh chemicals.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Bmw 2 Series Gran Tourer? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Bmw 2 Series Gran Tourer Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
How long a Bmw 2 Series Gran Tourer rear window replacement takes depends on what you count as “time.” The in-shop installation may only require 1–3 hours of labor, but the full experience often includes booking delays, glass sourcing, drop-off and pickup, and the adhesive set period after the new back glass is installed. Technicians must remove the damaged rear windshield, clean out fragments, prep the pinch weld, and set the new rear glass in fresh urethane with careful alignment—so even a “quick” replacement can consume most of a day. Bang AutoGlass is designed to reduce that friction with mobile service at your home, office, or driveway. On most Bmw 2 Series Gran Tourer back glass replacements, the hands-on phase (removal, prep, install, and cleanup) typically runs about 30–45 minutes. We then require at least 1 hour of stationary time before driving so the urethane reaches a safe initial bond. For planning purposes, many customers reserve a 90–120 minute window from arrival to safe drive-away. If you’re filing a claim, rear glass replacement is usually handled through comprehensive coverage, and we work with all carriers that provide it. We also include a lifetime workmanship warranty to back the seal and fit over time.
Bmw 2 Series Gran Tourer Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
A Bmw 2 Series Gran Tourer rear glass replacement is fast only when the technician follows a disciplined process. We begin by protecting the interior and gaining access: trim, moldings, and any fasteners are removed, and defroster or antenna connections to the back glass are identified and disconnected. If the window broke, we remove loose shards and vacuum the rear deck/cargo area and vents to limit leftover glass chips. The critical step is pinch-weld preparation. Old urethane is trimmed to the correct height, the surface is cleaned and decontaminated, and any corrosion is treated so the new bead bonds evenly. When the adhesive system calls for it, primer/activator is applied to improve adhesion and reduce rust risk. Fresh automotive urethane is applied in a continuous bead, then the new rear windshield/back glass is set and aligned so the perimeter seats uniformly. Final work includes reinstalling moldings, reconnecting the defroster, using retention tape if required, and inspecting for obvious gaps that can cause leaks or wind noise. At Bang AutoGlass, most Bmw 2 Series Gran Tourer back glass installs take about 30–45 minutes of hands-on work, followed by the required stationary set time before you drive.
Urethane Cure Time for Bmw 2 Series Gran Tourer Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
After a Bmw 2 Series Gran Tourer rear glass replacement, the limiting factor is rarely installer speed—it’s the urethane’s set and cure profile. Modern back glass is bonded with structural urethane, and that bond needs time to develop enough early strength to tolerate normal driving loads. This is why you may hear MDAT (Minimum Drive-Away Time) or SDAT (Safe Drive-Away Time): both point to the minimum stationary interval after installation for safe early retention. Drive-away time is not the same as full cure; the adhesive continues strengthening well beyond MDAT/SDAT. The correct drive-away recommendation depends on the exact urethane product and the real-world conditions at install. Temperature and humidity matter—cold or dry conditions can slow curing—and fast-cure systems may differ from standard formulas. A professional technician should follow the urethane manufacturer’s product data sheet for the specific adhesive used and communicate the required wait time clearly. For straightforward planning, Bang AutoGlass uses a conservative baseline for Bmw 2 Series Gran Tourer back glass service: keep the vehicle stationary for at least 1 hour before driving. This protects the fresh bond during its most vulnerable stage and helps maintain a stable seal as curing continues.
What Affects Bmw 2 Series Gran Tourer Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Rear glass replacement cure time on a Bmw 2 Series Gran Tourer depends on how fast the urethane adhesive can reach Minimum/Safe Drive-Away Time (MDAT/SDAT). Those times vary by adhesive formula and by conditions during service—especially ambient temperature and relative humidity. In colder weather, moisture-cure polyurethane typically reacts more slowly, so the bond takes longer to build early strength. Very dry air can also slow curing because many urethanes rely on moisture in the air. Heat usually speeds cure, but extreme heat can shorten open/working time, giving the technician less time to seat the Bmw 2 Series Gran Tourer back glass before the bead skins over. Adhesive choice matters: fast-cure and advanced-cure urethanes are designed to hit MDAT sooner within specific ranges, and specialized systems may be selected for very low temperatures. Vehicle design plays a role too. Larger rear windshields/back glass on SUVs and hatchbacks have longer bead paths and more leverage, so correct bead height, proper primers, and clean pinch-weld prep are critical for a consistent seal. Bang AutoGlass plans materials and process around real on-site conditions for your Bmw 2 Series Gran Tourer, then provides a clear drive-away recommendation you can follow.
When Is It Safe to Drive After Bmw 2 Series Gran Tourer Rear Glass Replacement? Practical Drive-Away Rules
When can you drive after a Bmw 2 Series Gran Tourer rear glass replacement? The correct benchmark is MDAT/SDAT—the minimum stationary time the urethane needs to develop enough initial strength for normal driving forces. Because MDAT depends on the exact adhesive and the temperature/humidity at install, a reliable shop follows the urethane manufacturer’s data sheet rather than a generic promise. Some fast-cure systems can reach drive-away strength sooner in ideal conditions, while cold or low-humidity days often extend the wait; extreme heat can also change working time and cure behavior. For planning, protect the most vulnerable window: Bang AutoGlass requires at least 1 hour with your Bmw 2 Series Gran Tourer parked after the back glass is set before it is safe to drive. During that hour, keep it stationary—no repositioning, no quick errands. After you’re cleared, drive gently the rest of the day: close doors softly, avoid rough roads when possible, and postpone high-speed or aggressive driving while the bond continues to strengthen. If you’re using insurance, rear window replacement is typically handled under comprehensive coverage, and every install is backed by our lifetime workmanship warranty.
Bmw 2 Series Gran Tourer Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
The best aftercare for a Bmw 2 Series Gran Tourer rear window replacement is to minimize stress on the glass while the urethane finishes curing. Begin by following the drive-away time provided; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is present, leave it in place—tape helps stabilize the rear windshield/back glass and keep moldings seated as the adhesive sets. Many jobs do well with roughly 24 hours of tape, and up to 48 hours in some situations. For the first 1–2 days, skip automated car washes, power washers, and anything that directs pressurized water at the window edge. Also avoid abrupt cabin-pressure changes: close doors softly, don’t slam the liftgate, and avoid blasting HVAC at the glass perimeter. If you can, steer clear of uneven construction roads on day one, since body twist and vibration can load the new glass before the bond is fully mature. After your first drive or first rain, do a quick inspection for dampness, wind noise, or moisture around trim and the cargo area, and report concerns promptly. Protect the rear defroster grid by cleaning with a soft cloth and mild, non-abrasive cleaner—no scraping or harsh chemicals.
Services
Service Areas
How Long Does Rear Glass Replacement Take on Bmw 2 Series Gran Tourer? Install Time, Adhesive Cure Time, and When It’s Safe to Drive
How Long Does Bmw 2 Series Gran Tourer Rear Glass Replacement Take? Typical Shop vs Mobile Timeline
How long a Bmw 2 Series Gran Tourer rear window replacement takes depends on what you count as “time.” The in-shop installation may only require 1–3 hours of labor, but the full experience often includes booking delays, glass sourcing, drop-off and pickup, and the adhesive set period after the new back glass is installed. Technicians must remove the damaged rear windshield, clean out fragments, prep the pinch weld, and set the new rear glass in fresh urethane with careful alignment—so even a “quick” replacement can consume most of a day. Bang AutoGlass is designed to reduce that friction with mobile service at your home, office, or driveway. On most Bmw 2 Series Gran Tourer back glass replacements, the hands-on phase (removal, prep, install, and cleanup) typically runs about 30–45 minutes. We then require at least 1 hour of stationary time before driving so the urethane reaches a safe initial bond. For planning purposes, many customers reserve a 90–120 minute window from arrival to safe drive-away. If you’re filing a claim, rear glass replacement is usually handled through comprehensive coverage, and we work with all carriers that provide it. We also include a lifetime workmanship warranty to back the seal and fit over time.
Bmw 2 Series Gran Tourer Rear Window Replacement Install Time: Removal, Prep, Cleanup, and Set
A Bmw 2 Series Gran Tourer rear glass replacement is fast only when the technician follows a disciplined process. We begin by protecting the interior and gaining access: trim, moldings, and any fasteners are removed, and defroster or antenna connections to the back glass are identified and disconnected. If the window broke, we remove loose shards and vacuum the rear deck/cargo area and vents to limit leftover glass chips. The critical step is pinch-weld preparation. Old urethane is trimmed to the correct height, the surface is cleaned and decontaminated, and any corrosion is treated so the new bead bonds evenly. When the adhesive system calls for it, primer/activator is applied to improve adhesion and reduce rust risk. Fresh automotive urethane is applied in a continuous bead, then the new rear windshield/back glass is set and aligned so the perimeter seats uniformly. Final work includes reinstalling moldings, reconnecting the defroster, using retention tape if required, and inspecting for obvious gaps that can cause leaks or wind noise. At Bang AutoGlass, most Bmw 2 Series Gran Tourer back glass installs take about 30–45 minutes of hands-on work, followed by the required stationary set time before you drive.
Urethane Cure Time for Bmw 2 Series Gran Tourer Back Glass: Safe Drive-Away Time (SDAT/MDAT) Explained
After a Bmw 2 Series Gran Tourer rear glass replacement, the limiting factor is rarely installer speed—it’s the urethane’s set and cure profile. Modern back glass is bonded with structural urethane, and that bond needs time to develop enough early strength to tolerate normal driving loads. This is why you may hear MDAT (Minimum Drive-Away Time) or SDAT (Safe Drive-Away Time): both point to the minimum stationary interval after installation for safe early retention. Drive-away time is not the same as full cure; the adhesive continues strengthening well beyond MDAT/SDAT. The correct drive-away recommendation depends on the exact urethane product and the real-world conditions at install. Temperature and humidity matter—cold or dry conditions can slow curing—and fast-cure systems may differ from standard formulas. A professional technician should follow the urethane manufacturer’s product data sheet for the specific adhesive used and communicate the required wait time clearly. For straightforward planning, Bang AutoGlass uses a conservative baseline for Bmw 2 Series Gran Tourer back glass service: keep the vehicle stationary for at least 1 hour before driving. This protects the fresh bond during its most vulnerable stage and helps maintain a stable seal as curing continues.
What Affects Bmw 2 Series Gran Tourer Rear Windshield Cure Time: Temperature, Humidity, Adhesive Type, and Glass Size
Rear glass replacement cure time on a Bmw 2 Series Gran Tourer depends on how fast the urethane adhesive can reach Minimum/Safe Drive-Away Time (MDAT/SDAT). Those times vary by adhesive formula and by conditions during service—especially ambient temperature and relative humidity. In colder weather, moisture-cure polyurethane typically reacts more slowly, so the bond takes longer to build early strength. Very dry air can also slow curing because many urethanes rely on moisture in the air. Heat usually speeds cure, but extreme heat can shorten open/working time, giving the technician less time to seat the Bmw 2 Series Gran Tourer back glass before the bead skins over. Adhesive choice matters: fast-cure and advanced-cure urethanes are designed to hit MDAT sooner within specific ranges, and specialized systems may be selected for very low temperatures. Vehicle design plays a role too. Larger rear windshields/back glass on SUVs and hatchbacks have longer bead paths and more leverage, so correct bead height, proper primers, and clean pinch-weld prep are critical for a consistent seal. Bang AutoGlass plans materials and process around real on-site conditions for your Bmw 2 Series Gran Tourer, then provides a clear drive-away recommendation you can follow.
When Is It Safe to Drive After Bmw 2 Series Gran Tourer Rear Glass Replacement? Practical Drive-Away Rules
When can you drive after a Bmw 2 Series Gran Tourer rear glass replacement? The correct benchmark is MDAT/SDAT—the minimum stationary time the urethane needs to develop enough initial strength for normal driving forces. Because MDAT depends on the exact adhesive and the temperature/humidity at install, a reliable shop follows the urethane manufacturer’s data sheet rather than a generic promise. Some fast-cure systems can reach drive-away strength sooner in ideal conditions, while cold or low-humidity days often extend the wait; extreme heat can also change working time and cure behavior. For planning, protect the most vulnerable window: Bang AutoGlass requires at least 1 hour with your Bmw 2 Series Gran Tourer parked after the back glass is set before it is safe to drive. During that hour, keep it stationary—no repositioning, no quick errands. After you’re cleared, drive gently the rest of the day: close doors softly, avoid rough roads when possible, and postpone high-speed or aggressive driving while the bond continues to strengthen. If you’re using insurance, rear window replacement is typically handled under comprehensive coverage, and every install is backed by our lifetime workmanship warranty.
Bmw 2 Series Gran Tourer Rear Glass Aftercare Timeline: Tape, No-Car-Wash Window, Leak Checks, and Rear Defroster Tips
The best aftercare for a Bmw 2 Series Gran Tourer rear window replacement is to minimize stress on the glass while the urethane finishes curing. Begin by following the drive-away time provided; Bang AutoGlass requires at least 1 hour of stationary time before driving. If retention tape is present, leave it in place—tape helps stabilize the rear windshield/back glass and keep moldings seated as the adhesive sets. Many jobs do well with roughly 24 hours of tape, and up to 48 hours in some situations. For the first 1–2 days, skip automated car washes, power washers, and anything that directs pressurized water at the window edge. Also avoid abrupt cabin-pressure changes: close doors softly, don’t slam the liftgate, and avoid blasting HVAC at the glass perimeter. If you can, steer clear of uneven construction roads on day one, since body twist and vibration can load the new glass before the bond is fully mature. After your first drive or first rain, do a quick inspection for dampness, wind noise, or moisture around trim and the cargo area, and report concerns promptly. Protect the rear defroster grid by cleaning with a soft cloth and mild, non-abrasive cleaner—no scraping or harsh chemicals.
Enjoy More Relevant Blogs
Rear Defroster Not Working on Bmw 2 Series Gran Tourer? When Rear Glass Replacement Makes More Sense Than Repair
Rear defroster not working on your Bmw 2 Series Gran Tourer? Learn common causes, when repair fails, and when rear glass replacement is the smarter fix for winter.
Tempered Safety Rear Glass Replacement for Bmw 2 Series Gran Tourer: Understanding DOT Markings and FMVSS 205
Need Bmw 2 Series Gran Tourer rear glass replacement? Learn tempered safety glass basics, DOT markings, and FMVSS 205, plus install and cure tips. Get a quote today.
Back Glass Replacement on Bmw 2 Series Gran Tourer: Defroster Tabs, Antenna Lines, and Connector Reattachment Basics
Back glass replacement on Bmw 2 Series Gran Tourer: defroster tabs, antenna lines, and connectors explained, plus install tips to avoid damage and rework safely.
Rear Glass Replacement for Bmw 2 Series Gran Tourer: What to Expect During Install and Aftercare
Rear glass replacement for Bmw 2 Series Gran Tourer: what happens during install, defroster and tint considerations, cure time, and aftercare to prevent leaks long-term.
OEM-Quality Rear Glass Replacement for Bmw 2 Series Gran Tourer: Defroster Grid and Tint-Match Checklist
OEM-quality rear glass replacement for Bmw 2 Series Gran Tourer: defroster grid and tint-match checklist, plus install tips to avoid callbacks—schedule service.
How to Schedule Mobile Rear Glass Replacement for Bmw 2 Series Gran Tourer
Schedule mobile rear glass replacement for your Bmw 2 Series Gran Tourer in minutes. Learn what info to provide, how long it takes, and prep tips for service day.
Post-Install Checks for Bmw 2 Series Gran Tourer: Rear Glass Replacement Wind Noise, Leaks, and Rattle Tests
Post-install rear glass checks for Bmw 2 Series Gran Tourer: test for wind noise, leaks, and rattles, plus when to return for warranty service—check today before trips.
Shattered Back Window on Bmw 2 Series Gran Tourer: A Step-by-Step Rear Glass Replacement Plan
Shattered back window on Bmw 2 Series Gran Tourer? Follow a step-by-step rear glass replacement plan, cleanup tips, defroster notes, cure time, and drive-away rules.
How Much Does Rear Glass Replacement Cost for Bmw 2 Series Gran Tourer? Pricing Factors, OEM vs Aftermarket, and Insurance Deductibles
Estimate Bmw 2 Series Gran Tourer rear glass replacement cost. Compare OEM vs aftermarket, labor factors, insurance deductibles, and ways to save. Request a quote.
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm
Bang AutoGlass
Quick Links
Services
Auto Glass Services by Makes & Models
Customers
Insurance Companies
Mailing Address
936 SW 1st Ave PMB 877 Miami Florida, 33130
Sales: Monday - Sunday , 24/7
Support: Monday - Friday , 10am to 7pm